Paleta Rack Uprights Paleta Rack Shelf

Nedcon AS/ 3.200 x 900 mm/ Rahmenprofil: 100 x 68 x 2.0 mm

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) Dkodpfx Absgwbbqo Hon No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Leto izdelave: 2008, stanje: dober (rabljeno), številka stroja/vozila: 431808, Ref. No. 18177 Hydraulic Flat, Profile, and Bar Shear with Notching Attachment and Punching Unit Technical Data: Djdpfx Abemidyie Hskn - Flat Bar Shear cuts up to 375 x 10 mm or 220 x 20 mm - Profile Steel Shear cuts angle steel (L-profile) at 90° up to 130 x 13 mm - Bar Shear cuts round bar up to 45 mm, square bar up to 45 mm - Notching Attachment with square notching tool 100 x 42 x 10 mm - Punching Unit – Punching force: 600 kN – with stop table – Throat depth: 300 mm – Punches holes in steel up to 28 mm Ø in 15 mm material, or 34 mm Ø in 12 mm material - Manual length stop - Drive: 400 V / 4 kW - Space requirements approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Dkedpfx Abod Nt Rqe Hon - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Dodpfxedh Tfgj Ab Hokn Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Leto izdelave: 1998, stanje: dober (rabljeno), številka stroja/vozila: 0159488169537, Offer 23293 Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel 9 mm - or with special punching tool: up to 100 mm Ø in steel 2.5 mm - Stroke adjustable: 0 to 28 mm (stepless) - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - Incl.: - Foot switch Dkjdpfxepuy H De Ab Hjn - Centre-point finder - Support table with foldable stops W 1100 x D 850 mm - Stop travel from centre of punch - Width between left/right approx. 470 mm x D 510 mm

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Dkedpfxsh Ryhnj Ab Hjn Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: rabljeno, 🧰 Caractéristiques du produit • Fabricant : Palflex • État : occasion • Couleur : orange • Hauteur : 400 cm Dkedjvfnqvepfx Ab Hen • Profondeur : 110 cm • Charge par travée : 24 000 kg • Longueur des lisses : 410 cm • Capacité de charge par lisse : 3 000 kg par niveau L’offre comprend : • 11 cadres pré-montés, profondeur 110 cm, hauteur 4 m • 40 lisses, longueur 4,1 m, capacité 3 000 kg par niveau • 80 dispositifs de verrouillage • 44 chevilles béton • 1 plaque de capacité de charge par rangée de rayonnage Protections d’angle d’occasion disponibles immédiatement, supplément de 15 € HT/unité ! Retrouvez d’autres accessoires dans notre catalogue d’accessoires. 💰 Prix : 2 790 € HT, hors TVA • Remise sur quantité : sur demande • Frais d’expédition : Europe sur demande • Délai de livraison : disponible immédiatement • Visite et enlèvement : possibles à tout moment sur rendez-vous Plus de 5 000 m linéaires de rayonnages à palettes de nombreux fabricants toujours en stock. (Sous réserve de modifications, erreurs et vente intermédiaire ! Voir nos CGV, tous prix hors TVA, départ entrepôt.)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable Dsdpfod Tyvxox Ab Hekn - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 561 km, moč: 368 kW (500,34 KM), prva registracija: 06/2024, vrsta goriva: dizel, konfiguracija osi: 8x4, medosna razdalja: 5.100 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 400 l, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2024, Oprema: ABS, AdBlue, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, klimatska naprava, meglenke, navigacijski sistem, spojler, tempomat, žerjav, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Power brake booster - Low noise - Speed limiter - LED lights - Alloy rims - Air horn - Particulate filter - Sun visor - Stability control - Power take-off (PTO) = Further Information = Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 21,160 kg Transmission Gearbox: I-SHIFT, automatic Axle configuration Front axle 1: alloy rims; steered Front axle 2: alloy rims; steered Rear axle 1: twin tires; alloy rims Rear axle 2: twin tires; alloy rims Functional Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Body make: HIAB OPT25S56 Condition Technical condition: very good Visual condition: very good NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 HOOKLIFT + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SPRUNG WHEELBASE 510 CM NEW MODEL FMX CAB WITH AIR CONDITIONING AUTOMATIC TRANSMISSION WITH ENGINE BRAKE ALCOA WHEELS HIAB 25 TONS HOOKLIFT TYPE: OPT25S56 ADJUSTABLE UNDER-RUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5+6 FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM 1,720 KG 4X OUTRIGGERS NEWLY BUILT UP TO 2023!!! 2 UNITS IN STOCK FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH Dsdjuxviwjpfx Ab Hokn

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 Dsdpfelikvhex Ab Hskn X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA