Oliver Fritz Gmbh & Co. Kg Koritski Trak S Sistem Za Kroglično Peskanje nakup rabljenega (138.584)

Leto izdelave: 2001, stanje: rabljeno, Technical Details: Number of turbines: 1 unit Drum length: 580 mm Operating hours: 30,810 h Compressed air: 5 - 7 bar Filling volume: 100 dm³ Total power requirement: 24.2 kW Ncsdpfou Nu Nksx Agxor Total weight: approx. 5.8 t DRUM BLASTING MACHINE with enclosed drum Manual and automatic operation Technical specifications: - Blasting wheel Ø = 380 mm - Drum Ø = 1150 mm x length 580 mm (perforation 4 mm) - Max. filling weight = 220 kg, filling volume 100 dm³ - Workpiece size (max. edge length) = 100 mm - Turbine Ø 380 mm with 15.0 kW - Abrasive discharge speed approx. 80.0 m/s - Abrasive throughput/turbine approx. 240.0 kg/min. - Recommended abrasive type: StD-Z 0.6 DIN 8201 HV 700 - Compressed air with cartridge filter system approx. 12 m³/h The machine is set up in Leipzig! It is not electrically connected. Sale as currently standing in stock Leipzig (see last photos). Machine was functional prior to dismantling.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Useful diameter: 1000 mm, useful height: 450 mm, max. load: 900 kg, connected load: 7.34 kW, turbine output: 5.5 kW, impeller diameter: 334 mm, throwing blades: 6, discharge velocity: 30 m/s - 70 m/s. Machine dimensions (LxWxH): approx. 3000 mm x 3000 mm x 3500 mm, weight: approx. 2050 kg, operating hours: 2559 h. Documentation available. Inspection on site is possible. Nedpjvdu N Nsfx Agxjcr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Nodpfsu Tha Isx Agxocr Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, nosilnost: 4.000 kg, dvižna višina: 10.000 mm, napetost baterije: 48 V, lastna masa: 9.000 kg, Splošno: HUBTEX 2125-PU/SO z modelom MQ 40 je električni večsmerni bočni viličar s nosilnostjo 4 tone in prečno kabino. Ta viličar je primeren za skladiščne prostore, kjer sta potrebni maksimalna prilagodljivost in okretnost v ozkih prehodih za premikanje tovora do 4000 kg. M = večsmerno krmiljenje Q = prečna kabina 40 = 4.000 kg 2125 = serija PU = Vulkollan pnevmatike SO = nagibanje in spuščanje vilic, izvlečne vilice do 1500 mm, hidravlično nastavljiva širina vilic Dodatna oprema/Predelava: - Kameri na desni in levi strani vilic z monitorjem v kabini - Pozicijski laser na desni in levi strani vilic Ncedpjx Aqaqsfx Agxer - Mehko gibanje pred odlaganjem vilic in pri prečkanju stopnic teleskopskega izvleka

Stanje: novo, Leto izdelave: 2025, Blasting container for blasting glass beads and ceramic balls, equipped with a drum magnetic separator and stainless steel grating floor. Internal dimensions: L=5850 mm, W=2300 mm. Side door opens for easy loading with a forklift. Njdjg S Rt Tjpfx Agxjcr

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room Nodpfxsndn Age Agxjcr • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Nsdpfx Agjng Exaexecr • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) Nsdpfxjx A U Nce Agxecr • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours (as of August 2025) Pressing Force, Main Press: 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Motor Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Rates: - Bulk density 20 kg/m³: up to 6 t/hour, depending on material - Bulk density 50 kg/m³: up to 13 t/hour, depending on material Bale Weight: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Control Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Type: HVI 46 Machine Dimensions with Bale Chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (Baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (Baler): approx. 12 t Scope of Delivery: Nodsvtpq Hopfx Agxjcr - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire reel boxes for 8 pieces of 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right side and can be folded down to the rear for transport. The baler has been partially overhauled and tested in our workshop—see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment possible. We assume no liability for technical specifications or potential errors.

Leto izdelave: 1992, stanje: rabljeno, Plate heat exchanger for milk processing Nodpfeh Eulgex Agxecr

Leto izdelave: 2020, stanje: novo, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year 2020 – NEW / Unused Short Description For sale are unused, originally packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in factory-new condition, have never been operated, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of manufacture 2020 Serial number including 032003303920 (additional serial numbers available) CE marking Yes Condition New / unused Originally packaged Never installed, never operated Stock item Quantity available 4 identical machines available New price New price €94,000 per unit (Total new value for 4 machines: €376,000) Design / Material Completely stainless steel Plate and frame filter press Nedpfx Ajx Ihufogxocr Gasketed plates Pharma/Biotech version Hydraulic closure incl. hydraulic unit CE compliant Technical Data Plate size: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Frame weight: approx. 480 kg Plate package weight: approx. 120 kg Plate Package 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter sheets per setup Hydraulics & Drive Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlet and outlet DN25 Vent/Drain DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Viewing available by appointment Immediately available

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 5.000 kg, debelina vilic: 80 mm, širina vilic: 180 mm, Telescopic crane 5,000 kg at a load center of 600 mm Telescopic length at hook: 3,600 mm with 950 kg payload Load capacities for different load centers: see load chart One swivel hook with 5,000 kg load capacity including shackle One swivel hook with 3,000 kg load capacity including shackle Nsdpfx Agoiuh I Aexjcr Height adjustable by pin locking system Galvanized locking pins, secured with wire Fork pockets suitable for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping off

Stanje: potreben popravila (rabljeno), Odsesalna naprava z briketirnim strojem Nestro Ni preverjena – potrebna popravila Zaradi tega se prodaja po zelo ugodni ceni. Lokacija: iz zaloge 54634 Bitburg - takoj na voljo - Ncedpfsxy Agkex Agxer

Leto izdelave: 2020, stanje: rabljeno,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Nodpfx Asyz Af Eegxecr Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Njdpfxehx Elfs Agxocr Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: rabljeno, Leto izdelave: 1991, consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l compensation tank - Shell and tube heat exchanger - Compressed air reduction station - Control cabinet with operator panel Machine (additional description): Juice heating system for pasteurization Capacity: 100 hl/h Permissible operating pressure (PWT): 16 bar, test pressure 20.8 bar Heat exchange surface: 21 m² Length: 5.6 m Width: 2 m Height: 2.4 m Control / Operation: Control cabinet with push-button operation Nsdpfx Agovcqy Uexjcr Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; Plate heat exchanger; Shell and tube heat exchanger; 2 x product pumps; Measuring, sensor and control technology, various valves and other fittings

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic Ncsdpfxsyzxfnj Agxjr - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. Ncodpoymmtcsfx Agxjr The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 150.050 h, Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, premer vrtljive mize: 500 mm, skupna masa: 13.000 kg, največja hitrost vretena: 14.000 obr/min, delovne ure vretena: 6.950 h, dovod hladilne tekočine: 20 letvica, nos vretena: HSK 63, število mest v zalogovniku orodij: 60, Oprema: ločilnik oljne meglice, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, • Stanje: vrhunsko stanje • Delovne ure: 6.950 • KESSLER-rotacijska miza, Ø 500 mm • Zaloga orodij: 60 postaj, HSK-A63 • Notranje dovajanje hladilne tekočine: 20 barov, s tračnim filtrirnim sistemom • Hladilni sistem: samodejni nadzor nivoja hladilne tekočine Nodpfx Agex Hg Ibsxjcr • Zrak skozi vreteno • Merjenje orodij: BLUM laserski merilni sistem za orodja • Merjenje obdelovanca: infrardeče tipanje obdelovanca (3D tipalni sistem), vključno s pripravo za merjenje obdelovanca • Nadzor trkov: POS DCM modul • Dovod medijev: 3-kanalni dovod medijev v sredini mize • Opazovanje: rotacijsko opazovalno okno • Ročno kolo Prosimo, pošljite nam neposredno povpraševanje na naši spletni strani, če vas zanima stroj. Iz tehničnih razlogov je neposredno povpraševanje za ponudbo prek zunanje platforme težavno in možno le z zamudo.

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 15.606 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, moč: 30 kW (40,79 KM), volumenski pretok: 160 m³/h, Good day, We hereby offer you, without obligation, a used baling press from Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block renewed) and tested during operation in both manual and automatic modes. The machine documentation is available in German. Inspection of the press is possible in our workshop by appointment. Nsdpoyplwfofx Agxecr We would be pleased if this machine is of interest to you. Your Service Team Mertens & Frowein GmbH

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Nsdpfxou Hl R Te Agxscr Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Leto izdelave: 2015, stanje: rabljeno, Nevtralizacija odpadne vode Kapaciteta: 8 m³/h Njdpfx Asxbqr Dogxecr Upravljanje / Krmiljenje: Stikalna omara z zaslonom na dotik / WAGO Oprema: Nevtralizacijska posoda (37 hl); Končna kontrolna posoda (4,5 hl); Posoda za lug; Posoda za kislino; Črpalke; Merilna, senzorska in regulacijska tehnika; Stikalna omara

Leto izdelave: 2021, obratovalne ure: 60 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X620DM-WL, We are selling a high-quality industrial videoscope. As plant engineers, we used this device to inspect weld seams inside pipelines. It delivers excellent image quality and is very easy to operate. Unfortunately, the probe length of 2 metres is no longer sufficient for our applications, so we need to sell it and purchase a model with a longer probe. The unit is only 3 years old. Original order confirmation details: Portable video endoscope, VTec X series - Forward or side view, white light - State-of-the-art CMOS camera technology - Bright, high-resolution 5.5" handset display Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light, front LED, 3.22 lm; white light, side LED, 6.45 lm Camera resolution: Front 1280 x 960 px; Side 1280 x 960 px Monitor resolution: 1920 x 1080 px Articulation: ≤ 150° ±10 Articulation control: 4-way motorised joystick Power supply: Four 18650 Li-Ion batteries with protection circuit or mains adapter Operating conditions, protection class, weight: Nsdpfx Agsu Ul A Noxscr Hand unit: -10°C to +50°C, IP54, 1.50 kg Probe: -20°C to +70°C, IP67 Scope of delivery: - VTec X620DM-WL video endoscope - SD-USB memory card reader - HDMI cable - Mini USB data cable incl. USB power adapter - Battery charger incl. power adapter - Power adapter - Four 18650 Li-Ion batteries with protection circuit - User manual - Carrying case Rigid over-sheath with hand grip for 6 mm videoscopes Working length of sheath: 350 mm Including 1/4" tripod thread mount

Leto izdelave: 2021, stanje: novo, Aluminium flat belt conveyor without substructure Conveyor length: 4000 mm Drive roller: knurled Return roller: crown-faced, turned Our core competency lies in delivering exactly what the customer truly needs. We work in close cooperation with our customers to develop customized, application-specific solutions and supply corresponding systems manufactured in-house. Please feel free to contact us by phone to find the right solution for your application. PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (external) Wave edge welded on both sides, 40 mm high T-30 cleats – 400 mm pitch * Antistatic due to conductive threads in the running side fabric Endless welded with stepped finger splice Ncedpfxohfwcbj Agxjr Food-grade certificate included V2A stainless steel support plate, full-surfaced Drive: Motor approx. 1.1 kW * Optionally controllable via frequency inverter Connection: 220/400 V