Krones Stroj Za Pihanje Plastenk Pet 12.000 Bph nakup rabljenega (86.348)

Stanje: rabljeno, Leto izdelave: 2004, Overview This complete filling line for PET disposable bottles was manufactured in 2004 by the German company KRONES. The line was operated as a single-use bottle filling system. It is designed for high-performance beverage production, with a capacity of up to 12,000 bottles/hour and is in good condition. Technical data Rjdpfx Asyb Sa Djf Tjcb - Capacity: 12,000 bottles/hour (at 1.5L); 14,000 bottles/hour (at 0.5L) - Filled products: carbonated water and soft drinks at 15°C and 8.0 g/l CO2 - Bottle formats: 0.5L and 1.5L PET CSD - Closure formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around labels from the roll with hotmelt glue and 2 x cold glue labelling stations 8-8-130 for paper labels - Packaging formats: shrink film packaging with/without carry handle (3x2) - Pallet: 4 x ¼ plastic pallet (600 x 400 mm); 2 x half pallet (800 x 600 mm) on Euro pallet (1,200 x 800 mm) - Application: CSD - Hygienic design - Condition: good technical condition, disassembled - Blow moulder, filling, and capping machine as block system Scope of supply: - Blow moulder | KRONES | Contiform S08 | 2004 - Compressor | Kaeser | booster only | 2004 - Filling/capping | KRONES | Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 - Mixer | KRONES MSF 24/2 | vacuum-assisted degassing | Brix meter | CO2 meter - Velcorin | Burdomat II G | 2004 - Bottle inspection | KRONES | Checkmat FM-G fill level (underfill) and cap control - Labelling machine | KRONES | Unimodul 600-15 | 2004 - Bottle inspection | KRONES | Checkmat E | label check presence | 2004 - Date coder | Excel 170i UHS | 2004 - Shrink packer | KRONES | Variopac FS-30 | 2004 - Handle applicator | Comag | H 40/2 | 2004 - Palletizer | KRONES | Robot 3A - Pallet securing | Lachenmeier Multi Flex 1

Stanje: rabljeno, Leto izdelave: 2002, Overview This PET bottling line was manufactured between 2002 and 2013 by the German company Krones and is designed for filling still and carbonated water into PET bottles with Alaska neck finish. The line will remain in operation until September 2025 and can be inspected during production upon prior appointment. Technical Details - Output: 22,000 bph (the nominal speed for 0.5L is 25,000 bph) - 60 rinsing nozzles - 80 filling valves - 15 capping heads - Product: Water - Container material: PET - Neck type: Alaska Rcedpfxjwqpgze Af Tsb - Label type: OPP - Capper brand: Zalkin - Years of manufacture: 2002, 2009, 2013 Scope of Supply - Compressor: Atlas Copco ZD2300VSD (2009) - Blow molder: Krones Contiform S14 (2009) - Air conveyor: Eurosistemi (2002) - Filler: Krones Volumetic, Variojet (2002) - Labeller: Krones Contiroll (2013)

Stanje: rabljeno, Leto izdelave: 2002, Overview This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and is used for filling carbonated water and soft drinks into 1.5-liter PET bottles. The line offers a production capacity of up to 16,000 bottles per hour. It has been regularly maintained and is in good condition. Availability: End of August 2025. Technical Data Rcedjwzvl Sopfx Af Tob Output: up to 16,000 bottles per hour (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short-neck and cap) Bottle material: PET Filler type: Isobaric filler Year of construction: between 1999 and 2007 (various machines) Closure type: Short-neck Label type: OPP (Contiroll) Scope of Supply 1 x Blowing machine CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing machine to labeller & filler 1 x Labeller CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and soft drinks | approx. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and shrink tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Handle applicator TWIN PACK MDE INOX | 2003 | single lane, 45 packs/min Package transport to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet magazine with lift and transport 1 x Pallet stretch wrapper ROBOPAC GENESIS | 2002

Stanje: rabljeno, Leto izdelave: 2002, Overview  This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or soft drinks, and is also suitable for water with or without CO₂. With an output capacity of up to 12,000 bottles/hour (0.5 L), it provides a turnkey solution from bottle blowing to palletizing. The system is being sold due to the modernization of the PET division and its replacement with a higher-capacity system. The equipment is in good condition and remains fully operational. Rodpfjxhf Hiox Af Tjcb Technical Data - Plant capacity: 12,000 bph at 0.5 L, 9,000 bph at 1.0 L, 8,000 bph at 1.5 L, 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 - Max. bottle diameter: 106 mm - Products: Beer (+4°C), kvass and soft drinks (+10°C), still and carbonated water - Labelling: Wraparound labels, pre-cut paper labels, hot-melt adhesive - Secondary packaging: Film only (4×3 and 3×2) - Pallet type: EURO 1200×800 mm - Control system: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Supply - Blow moulder | Krones | Contiform S8 | 2002 | incl. preform feeder, chiller, crate tipper - Rinser | Krones | Variojet | 2002 | Rotary rinser - Filler | Krones | Mecafill | 2002 | Rotary isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary labeller - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary hot-melt labeller - Packaging machine | Krones | Variopac FS-45 | 2002 | Shrink packer, formats 4×3 / 3×2 - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Packaging conveyor | Krones | Multico S | 2002 | For packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeder system, hopper, valve manifold

Stanje: rabljeno, Leto izdelave: 2006, Pregled Stroj za pihanje BLOMAX 4 je bil izdelan leta 2006 v nemškem podjetju SIG Corpoplast (danes KHS). Prenovil ga je strojni proizvajalec, stroj si je mogoče ogledati v suhem teku. Pihalne forme niso vključene, se jih pa lahko zagotovi. Tehnične podrobnosti Zmogljivost: do 7.200 steklenic/h 4 kavitet Dimenzije: 4960 mm x 3900 mm x 3000 mm Teža: 15 t Delovnih ur: 44.736 Volumen steklenic: 200 ml - 2000 ml Maks. premer: 115 mm Maks. dolžina: 350 mm Predoblike Dolžina: 60 - 200 mm Maks. premer nosilnega obroča: 35 mm Obseg dobave Stroj za pihanje je popolnoma opremljen s sistemom za dovajanje predoblik (silo, dvigalo, sortirnik, žleb). Redol Hxpkopfx Af Tecb

Stanje: rabljeno, Leto izdelave: 2001, Pregled Stroji za pihanje KSB3000 je leta 2001 izdelal avstrijski proizvajalec strojev KOSME. Nameščen je pri proizvajalcu strojev in ga je mogoče v poskusnem obratovanju pregledati za preverjanje funkcionalnosti. Tehnični podatki Zmogljivost: 3.600 plastenk/h 3 votline Dimenzije (D׊×V): 6830 mm x 2860 mm x 2450 mm Potrebna površina cca 9x5 m² Teža: 4,5 t Obratovalne ure: 19.935 Volumen plastenk: 250 ml - 2500 ml Največji premer: 110 mm Obseg dobave Pihalni stroj je popolnoma opremljen s sistemom za dovajanje preform (silos, dvigalo, sortiranje, drsnik) Rsdpfx Aol Hxpref Tjcb

Stanje: rabljeno, Leto izdelave: 1992, Overview This blow molding machine was built in 1992 by the French manufacturer Sidel. It is capable of producing up to 4,000 bottles per hour. Technical details Capacity: 4,000 bph 4 cavities Scope of delivery Blow molding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two mold types for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Rcjdpfx Aonpbhvof Tjb

Stanje: rabljeno, Leto izdelave: 2002, Overview The blow molding machine was manufactured in 2002 by the then company SIG Corpoplast (now KHS). The machine is still in operation and can be inspected. Technical data - Rated output: 30,000 bottles/h - Most recently used formats: 1.0L (27,000 bottles/h), 1.25L (27,000 bottles/h), 2.0L (22,500 bottles/h) - Bottle volume: 200 – 3,000 ml Redpfx Aery Iiwof Tjcb - Max. diameter: 126 mm - Length: 107 – 350 mm - Preform length: 60 – 200 mm - Max. preform diameter: 48 mm - Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm - Required space: 11,500 mm x 11,300 mm - Weight: 31.15 t Scope of delivery - Blomax 20 - Preform feeder VT 3010

Stanje: rabljeno, Leto izdelave: 2018, Overview The machine was built in 2018 by German manufacturer KRONES and is designed for high-speed, roll-fed wrap-around labelling. This machine is ideal for bottling plants that require flexibility for various labelling technologies. The machine was taken from a production line and is fully operational. It is available for inspection and can be dismantled, packed, and shipped upon request. Technical Data Year of manufacture: 2018 Capacity: approx. 20,000 bph Bottle formats: 0.5 L, 1.5 L PET Labels processed: In reel Roll change: Automatic Power supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, control voltage 24 V DC Protection class: IP 54 (main control cabinet and motors) Modular design (Plug & Play): Rcedpfxoyb Smde Af Tob Automatic docking stations enable fast and tool-free changeover between different labelling methods (e.g. hotmelt, cold glue, self-adhesive, wrap-around) Versatility: Can handle a wide range of container shapes and sizes (glass, PET, cans). Scope of Supply Krones labelling machine ERGOMODUL (2018) CE certification, operating and maintenance manual, wiring diagrams Spare parts and format change components Drying system | KRONES-LINADRY | 2003 Label inspection unit | KRONES | Checkmat

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13-13, Stroj za pihanje BLOMAX 4 model 13-13. Stroj je brez napak in deluje v odličnem stanju s popolno funkcionalnostjo. Napajanje: 400 V / 150 A / 60.000 W Rcjdjt Akgwepfx Af Tjb Leto izdelave: 2000

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.438 mm, skupna dolžina: 6.058 mm, skupna višina: 2.591 mm, lastna masa: 9.500 kg, vhodna napetost: 400 V, Popolnoma avtomatizirana linija za pihanje PET in polnjenje vode v 1-litrske steklenice. Nahaja se v kontejnerju, samozadostna z agregatom, kompletom za pripravo vode, kompresorjem in vso potrebno infrastrukturo. Dodatne informacije na fotografijah in YouTube posnetkih. Rcsdpfx Afox Hqrwo Tjb

Stanje: rabljeno, Geschwindigkeit: 8.000 Flaschen pro Stunde mit 0,5-Liter-Flasche. Verschiedene Formate sind optional möglich. Der Abbau wurde Anfang Februar 2018 von der Seegräber GmbH durchgeführt. Im Lieferumfang enthaltene Maschinen: - SIDEL SBO 6 Blasmaschine, 2006 komplett von SIDEL überholt - Preform-Magazin und Preform-Elevator Rcsdexytvispfx Af Tsb Kompressor, Kühlung und Formen sind nicht enthalten.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.188 kN, injekcijska masa: 6.935 g, premer polžastega transporterja: 130 mm, proizvodna zmogljivost: 17.000 enota/h, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Zapiralna sila: 320 t Teža brizganja: 6.935 g Premer polža: 130 mm Rsdpfx Asx A Efhof Tscb Kapaciteta: 17.000 preform/h PODROBNOSTI STROJA Izvedba: 72-mestna, 4-stopenjska OPREMA Komplet za odvzem Transportni trak LT/h 1825 Robot TPS TRT-M4-72-E

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SBO 6/10, Sidel stretch blow molding machine Max. output: 6,000 bottles/hour Max. bottle size: 3,000 cc Blow stations: 6 The machine is in very good and well-maintained condition. GENERAL INFORMATION The SBO 6/10 features 6 cavities and 10 heating modules. Operates with a variety of bottle sizes and designs from 0.25 to 3 liters. Two-stage PET stretch blow molding machines from Sidel require pre-manufactured preforms to be fed into the machine. Separating the processes for producing bottles and preforms allows for production optimization, greater operational flexibility, and provides a higher production capacity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9 – 41 mm (measured from bottom of support ring) Minimum ID of neck: 19 mm Maximum OD of neck: 34 mm Preform support ring diameter: 29 – 51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle capacity: 0.25 – 3 liters Rodpfog Ailcsx Af Tjcb TYPICAL PREFORM WEIGHTS (for still and carbonated liquids) 0.25 liter bottle: 14-20 grams 0.50 liter bottle: 20-33 grams 1.00 liter bottle: 26-40 grams 1.50 liter bottle: 35-51 grams 2.00 liter bottle: 44-58 grams 3.00 liter bottle: 68-84 grams BLOW WHEEL Height: 3.5 meters Number of cavities: 6 Clamping force: 10 tons Item height (below neck) at discharge: approx. 1.4 meters Machine DC drive motor power: 4 kW HEATING UNIT Height: 2 meters Number of oven heaters: 10 Number of heating zones per module: 8 Maximum power: 170 kW ELECTRICAL REQUIREMENTS Maximum supplied power: 200 kW Average consumption: 100–150 kWh (varies with bottle produced) COMPRESSED AIR Available supply pressure: 7–35 bar Operating pressure: 7 bar Flow rate: 50–100 Nm3/h (varies with bottle produced) Blow pressure – Standard base: up to 25 bar Blow throughput – Standard base: 110–550 Nm3/h Blow pressure – Petaloid base: up to 35 bar Blow throughput – Petaloid base: 155–770 Nm3/h CHILLED WATER Temperature: 10–12°C Pressure: 5–6 bar Flow rate: up to 6 m3/h Heat dissipation: up to 16,000 kcal/h WEIGHT Blow wheel with molds: 8 tons Heating unit: 2.2 tons Preform feeder: 0.65 tons Control cabinet: 0.85 tons PREFORM HEATING UNIT The preforms are transported with the necks facing upward to the heating unit. This module ensures that preforms are rotated before passing neck-down in front of the heating elements, and again afterward. During the heating phase, the preforms are rotated and the necks are shielded from heat to optimize thermal distribution without distorting the neck. Heating is performed via 10 heating modules. Each module can accommodate up to 8 horizontally-stacked IR lamps, with air-cooled ends. The heating output of the 8 zones—matching the 8 lamp rows—is adjustable to optimize the temperature profile. These zones are regulated across all SBO models. After heating, an IR camera monitors preform temperature, enabling automatic adjustment of the controlled zones to maintain the required temperature at all times.

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 120 mm, vpenjalna sila: 800 kN, dolžina plošče: 1.600 mm, širina plošče: 600 mm, Blow Moulding Machine Bekum Blower Model BA 200 8-Litre Accumulator Head Number of Heads: 1 Number of Stations: 1 Production Capacity (Kg/Hr): 500 kg/h Extruder Type: Accumulator Material Processed: PE Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Wall Thickness Control: Yes Rcodpowl D U Njfx Af Tjb Supplied with Material Feeding System For reference: Clamp Opening Stroke: 710 mm Clamping Force: 800 kN

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: s.p.a magic m.p. Tip: MGL2D. Ta pihalni stroj je popolnoma funkcionalen. Še vedno je v proizvodnji in si ga je mogoče ogledati po predhodnem dogovoru. Po želji lahko pošljem tudi videoposnetke. ZNIŽANJE CENE!!! Z 21.000 na 19.000 EUR! Rjdpfx Aexxp Tbjf Tjcb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SB 8015, Linear blow molding machine SB 8000, serial number 8015, year of manufacture 2006, with a nominal capacity of 7,200 bph (approximately 6,000 bph with a 2.0L bottle). Rodpfet T Txqox Af Tocb The machine has undergone a complete overhaul and is in very good technical condition, with all wear parts replaced. The machine package includes: - Preform feeder - Quick-change mold system - Electric stretching system - Mechanical lifting system - Electrically powered, pressure compensating closing system - 6-inch touch screen panel - Smooth output adjustment in the range of 5,000–7,400 bph - Function for eliminating deformed preforms and cracked bottles The machine is configured for PCO 1810 preforms, but can be adapted for other preform types as needed. The machine is sold without blow molds. We can manufacture molds according to the customer's design, tailored for our machine.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, Linear stretch blow molding machine SB 3000.5E, including: New modular heating system, Redpfot Uap Sox Af Tscb preform feeder, easy and quick mold change system, electric stretching system, touchscreen control panel, stepless output adjustment, broken bottle rejection function Single-cavity machine prepared for blowing 5-liter bottles. The machine underwent a complete overhaul at Dynaplast; all consumable components were replaced and the bottle discharge basket drive was modified—using a belt drive with servomotor instead of an angular gearbox, resulting in smoother operation. The preform stretching is also performed via a belt-driven servo system, providing stepless speed control from the operator panel (the stretching rod speed can be smoothly adjusted). The listed price is for the machine without the mold visible in the photos; it is possible to purchase the shown 5L mold as an option.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 65 mm, skupna masa: 9.000 kg, vpenjalna sila: 785 kN, skupna širina: 1.800 mm, skupna dolžina: 4.500 mm, skupna višina: 3.000 mm, moč: 0,045 kW (0,06 KM), Oferujemy na sprzedaż lekko używaną wtryskarko-rozdmuchiwarkę w doskonałym stanie. Maszyna jest podłączona i w pełni sprawna, możliwość prezentacji podczas pracy. Możemy również zaoferować kilka gotowych form do produkcji kanistrów oraz kloszy lamp. Maszyna przystosowana jest do pracy z tworzywami typu PMMA, PC, PP oraz PE. Rcodpfx Aethk Rzjf Tsb

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HY-43, premer vijaka: 110 mm, skupna širina: 2.500 mm, skupna dolžina: 8.500 mm, skupna višina: 9.500 mm, moč: 350 kW (475,87 KM), Oprema: dokumentacija / priročnik, Dvoslojni stroj za pihanje plastike je nova generacija opreme za ekstruzijsko pihanje plastike. Glavna uporaba je oblikovanje kajakov, kanujev, desk za deskanje in drugih velikih votlih plastičnih izdelkov. Stroj uporablja motor z visokim navorom in zadostno močjo za rezanje materiala. Stopljena plastika se iztisne v akumulacijsko glavo orodja. Ko material doseže nastavljeno prostornino, sistem za nadzor debeline stene neprekinjeno prilagaja razmerje odprtine. Iztisnjen material se oblikuje v predobliko, ki se nato oblikuje v končni izdelek. Rcjdpfex R R Igex Af Tsb

Leto izdelave: 2013, stanje: rabljeno, We hereby offer you a used PET bottle crusher from the manufacturer BOREMA, model R-1200 F, year of manufacture 2013, for the residual emptying, degassing, and pre-compaction of supplied PET bottles ranging from 0.3 to 2.5 liters in capacity. The machine is equipped with a chassis and can be driven in and out of the feed hopper of your baler. The machine has a throughput capacity of approximately 85,000 bottles, corresponding to around 3 tons per hour. Rodpfou Thpnex Af Tjcb The following technical information is available: Manufacturer: BOREMA Umwelttechnik AG Model: R-1200 F (with hopper for driving the compactor in and out) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Main fuse: 40 A Construction: Inline system Function: Double-rotor press system Rotor pre-tensioning: pneumatic, approx. 16 t Overload protection via anti-blocking system Input material: PET disposable and returnable empty bottles, 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 L capacity Throughput capacity: approx. 3 t/h, equivalent to approx. 85,000 bottles/hour, depending on size Required compressed air capacity: G1/2”, 8 bar, 40 L/min Compaction ratio: 1:3 Internal flange dimensions: 972 x 1,220 mm (L x W) Feed opening: 565 x 1,280 mm (L x W) Weight: approx. 2,500 kg Applications: Thanks to the chassis, the PET compactor can be moved into the feed hopper of your baler as needed, ensuring the residual emptying, degassing, and pre-compaction of fed bottles and packaging. For material changes, the compactor is simply removed from the feed hopper, allowing continued baling of paper, cardboard, films, etc. without the use of the compactor. BOREMA PET compactor process: The plastic containers are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pre-tensioned by two air bellows and presses the PET bottles against the second rotating shaft with 16 t of pressure. This crushes, bursts, and degasses the closed plastic container. Residual liquids are drained, and the material drops pre-compacted into the baler. In the event of contaminants, the pneumatically pre-tensioned shaft moves aside and the contaminant is passed through. Key advantages compared to conventional PET perforators with punch spikes or knives: The BOREMA process is significantly more efficient and wear-resistant than conventional PET perforators with spikes or knives. The greatest advantage is that introduced contaminants such as metal parts, stones, bottles with frozen content, and wood pieces are guided through by the pneumatically yielding rotor shaft without the system stopping or suffering major damage. In conventional perforators, spikes or knives may break or become so jammed with contaminants that the system must be shut down and extensively repaired. Remarks: The documentation (operating instructions, CE, electrical/hydraulic wiring diagrams) is complete. Inspection by appointment is possible. We accept no liability for the technical data or any possible errors.

Stanje: rabljeno, številka stroja/vozila: LC600, Technical Specifications and Performance Data This used bottling line is configured for highly efficient beverage production in 0.5L PET bottles. Optimised for both carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletising. The configuration is non-combi and features a separate blow moulder upstream of the filling monoblock, ideal for flexible maintenance and line balancing. Production speed: 25,000 bph Bottle formats: Compatible with 0.5L bottles Containers: Designed for handling PET bottles Configuration: Non-combi (separate blow moulding and filling systems) Main components and years of manufacture: - Sidel Universal SBO 14 blow moulder (2007) - Sarcmi 70-10 ISO filling monoblock (1988 – fully overhauled 2025) - Sarcmi labeller (2011) - Zambelli shrink wrapper (2004) - Handle applicator (2004) - ACMI double-head palletiser (1992) Advanced Automation and Control Systems The line benefits from a modernised conveyor and control system, with conveyor management and electrical control cabinets upgraded in 2010–2011. This update improves module synchronisation, enhances safety interlocks, and ensures stable high-speed performance across blowing, filling monoblock, labelling, and packaging stages. - Upgraded conveyor control and electrical panels in 2010–2011 - Integrated safety interlocks for secure, high-throughput operation - Non-combi architecture simplifies maintenance and phased upgrades Line Integration Capabilities Designed as a complete production solution for water bottling, this used line offers seamless integration from blow moulding to end-of-line palletising. The non-combi layout allows independent operation and optimisation of the blow moulder and filling monoblock, making format changes and maintenance manageable without stopping the entire line. Inline flow: Blow moulder → Filling monoblock → Labelling → Shrink wrapping → Handle application → Palletising Conveyor system upgraded for reliable accumulation and product transfer Suitable for carbonated and still water in PET Machine Condition and Maintenance History Rsdsyk E Srspfx Af Tecb This used bottling line has benefited from targeted upgrades of the conveyor management and electrical control cabinets, completed in 2010–2011. A key highlight is the Sarcmi 70-10 ISO filling monoblock, originally built in 1988 but fully overhauled in 2025 to ensure maximum operational reliability. The line is sold in operational condition as a ready-to-use industrial packaging solution. - Sarcmi 70-10 ISO filling monoblock: Overhauled in 2025 - Conveyor and electrical control cabinets upgraded: 2010–2011 - Well-known OEM components throughout the line - Operational with existing 0.5L PET format

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, obratovalne ure: 48.400 h, 1 kos rabljeni pihalni stroj Proizvajalec: Fischer - W. Müller Tip: FMB 3-120 Rodpfx Aeynutmef Tecb Leto izdelave: 1999 Zapiralna sila: 120 ton Tip ekstruderja: 120/24 WT Akumulacijska glava: BFKS25, približno 17,75 kg Na stroju je možno proizvajati sode do velikosti 200 litrov. Video na voljo!

Leto izdelave: 1973, stanje: dober (rabljeno), 1 used keyway shaft grinding machine, manufacturer Fritz Werner Type FKR 16 Rcsdpfxjn Atche Af Tob Year 1973 Serial no. 5275/8012 Technical specifications: Center height: 185 mm Max. grinding length: 1600 mm Passage diameter: 55 mm Divisions: 4–32 Dimensions (L x W x H): 5900 x 2300 x 2000 mm Weight: 7 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Industrijski pihalnik BATTENFELD FISCHER model VK1-1, letnik 1988, trenutno operativen. Enopostajni stroj, uporabljen v industrijski proizvodnji embalaže s postopkom pihanja. Funkcionalna oprema, na voljo za ogled na lokaciji v tovarni v Albaceteju (Španija). Rodpfx Afjyn Ityo Tocb Neto cena EXW Albacete. Po dogovoru.