Dvoosni Drobilnik Za Aluminij nakup rabljenega (90.849)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Tehnično stanje zelo dobro Pripravljena za delo Stroj prilagojen za rezanje aluminija in PVC Upravljanje E 580 Premer žaginih listov 500 mm Rezanje po zunanji dimenziji, brez korekcije Samodejno spuščanje in dviganje zaščit žaginega lista Crodpfx Aezgu Efjdiof Pnevmatično nastavljanje kota 45-90 stopinj Tiskalnik

Leto izdelave: 2004, stanje: rabljeno, Najv. premer žaginega lista: 500 mm Območje reza do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazovalnikom Hitrost žaginega lista: 2 obr./min Števec kosov z avtomatskim izklopom ob doseženi nastavljeni vrednosti Brezstopenjsko nastavljiv pnevmatski podajalnik materiala Hidropnevmatski podajalnik žage Pnevmatske vpenjalke materiala Naprava za pršenje Crsdpfxjxn Iq Dj Adiof Vključuje navodila za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxDxV) 1000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Rabljena avtomatska krožna žaga za aluminij MEP Cobra 352 nc 5.0 Letnik 2017 Dimenzije lista: 350x32x3,4mm Rezalna hitrost list: 1700/3400 rpm Kot reza : od -45°do +45° Kapaciteta reza: pri 0°: okroglo: 120mm, kvadrat: 105mm , pravokotnik 180x70mm Codpfx Aswu Tz Rsdisrf Zaslon na dotik Teža stroja: 605kg

Stanje: skoraj kot novo (rabljeno), Model 345 podjetja Magurit je zmogljiv industrijski rezalnik z zaprtim rezalnim valjem, zasnovan posebej za obdelavo blokov zamrznjene hrane (mesa, rib, sadja ali zelenjave). Credpfozrgkqox Adijf

Leto izdelave: 2012, stanje: rabljeno, Maks. premer žaginega lista: 530 mm Kapaciteta reza pri 90° Okroglo 180 mm, Kvadrat 170 mm, Pravokotnik 380x70 mm Kapaciteta reza pri 45° levo Okroglo 180 mm, Kvadrat 150 mm, Pravokotnik 290x70 mm Kapaciteta reza pri 45° desno Okroglo 180 mm, Kvadrat 150 mm, Pravokotnik 290x70 mm Digitalni prikaz kota za žagino mizo Obseg vrtenja žagine mize 180° Pršilna naprava Dvoročno upravljanje Cjdezabmqepfx Adiorf

Stanje: rabljeno, Dvoglava kotna žaga RAPID tip DGL 5000 / 500 Potreben popravila – krmilje ne deluje Leto izdelave: 1993 Dolžina reza: 5000 mm Codpfxoyxy S Ds Adisrf Najkrajša dolžina obdelovanca: 350 mm Premer žaginega lista: 500 mm - Krmilje ne deluje Dimenzije (D x Š x V): 7200 x 1700 x 1850 mm Teža: 1250 kg Sprostimo prostor Ugodni stroj – idealno za izvoz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Aluminium profile mitre saw, manufacturer: Dry Tech Crodpotwn E Ujfx Adiof Model: 355 MLS, year of manufacture: 2002. Saw blade diameter: 355 mm Cutting capacity: - Round material: max. 120 mm - Square material: max. 120 mm x 120 mm

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2015-26004, moč: 5,5 kW (7,48 KM), 1.3 Sistem drobnega drobljenja FB 1000 DS1 Drobilnik za fino drobljenje FB 1000 DSl FG3 Pogonska moč: 5,5 kW + 3,0 kW Izvedba: 1 x rezalni valj z bodičastimi diski zgoraj 1 x dozirni valj z bodičastimi diski spodaj Maksimalna debelina plošče za obdelavo: približno 100 mm Maksimalna obdelovalna gostota: 50 g/liter Crsdpsyvfhwjfx Adisf Svetla širina: 1000 mm Dovajalna višina s transportnega traku: 180 mm Dodatni zaščitni pokrov na transportnem traku zagotovljen s strani naročnika Polžasti izmet za drobilnik za fino drobljenje FB 1000 DS1: Pogonska moč: 0,75 kW Sesalni priključek: NW 200 mm Vključuje servisna vratca z varnostnim stikalom

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 400 mm, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps - Mist lubrication system - Air blow gun Codpou Si Ndofx Adiorf - Protective cover - Documentation - 400V

Stanje: dober (rabljeno), Leto izdelave: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per furnace: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load dimensions: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Maximum temperature: 600 °C Operating temperature: 510 °C Credpfxey H Ih Aj Adisf Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: type = QT-24.16.57/71E Max. bath temperature: 70 °C, capacity = 20 m^3 2 tempering furnaces: type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Max. furnace temperature: 250 °C Operating temperature: 180 °C Total power: 2 x 40.5 kW = 81 kW electric loading/unloading track, GEA cooling coil, safety enclosure, safety devices, plant control system 1,056 annealing baskets with post pallets System already dismantled, packed and in storage

Stanje: dober (rabljeno), Marel Townsend Stork rotacijska stroj za paniranje v odličnem stanju. Crsdpfx Adomqk Tweiof

Stanje: dober (rabljeno), Leto izdelave: 2016, premer žaginega lista: 600 mm, vrsta vhodnega toka: trifazni, obratovalni tlak: 8 letvica, Industrijski aluminijasti žagalni stroj, ki samodejno reže z uporabo pnevmatskega dvo-gumbnega upravljanja, pri čemer je obdelovanec dvakrat pnevmatsko vpet. Vpenjanje je nastavljivo tako vodoravno kot navpično. Poleg tega je ta žagalni stroj opremljen z megličnim mazalnim sistemom, ki izboljša proces rezanja. Podajanje žaginega lista je na tej napravi nastavljivo. Lastnosti: - samodejno gibanje žage - dvojno pnevmatsko vpenjanje - žagin list se premika od spodaj navzgor - žagin list iz trdo kovine - nastavljiva hitrost žaganja - dolžinski naslon - mazalni in redukcijski sistem - razpršilna instalacija - zračno pištolo - rezanje pod kotom - samodejno in ročno žaganje Stroj je nameščen in se dostavi montiran. Testiranje je možno. Crjdpezf U Tmjfx Adief

Leto izdelave: 2018, stanje: rabljeno, Podtalna ročna krožna žaga za žagin list do D 250 mm Obseg nagiba za poševne reze -45°/90°/+30° Delovno območje Credpjy Nm N Rofx Adisf (Okrugla) 90° 80 mm (Okrugla) 45° 80 mm (Kvadratna) 90° 70 mm (Kvadratna) 45° 65 mm 220 V

Leto izdelave: 2004, stanje: dober (rabljeno), Podtalna žaga ročna uporaba za žagin list do premera 300 mm zajem pod kotom levo-desno do 45° ročna pršilna naprava za emulzijo robustno ohišje iz jekla in delovna miza iz sive litine 400V Cjdjy Nm Hiepfx Adijrf premična na podstavku

Stanje: generalkompletno obnovljen (rabljeno), Priključni drobilnik za mobilno EXTEC sejalnico (npr. za EXTEC 5000S, Turbo, Turbotrac, S-serija) za predhodno drobljenje lepljivega/skupinskega materiala. Csdpsu Dhkdjfx Adiorf

Leto izdelave: 1995, stanje: dober (rabljeno), Rotor width 600 mm 7.5 kW motor Credpfx Adofxg Dljisf 650 rpm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nagib rezila -45° / +45°. Največja odprtina primeža 180 mm. Največja dolžina brez podajalnika 385 mm. Premer diska 350 mm. Hitrost vrtenja rezila 1700 / 3400 vrt/min - 2 hitrosti. Csdpfox Hw Sqjx Adierf

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Obseg rezanja okroglega jekla pri 90°: 220 mm, For sale: 1 used CNC aluminum circular saw automatic including extraction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC Year: 2015 TECHNICAL DATA • Cutting range round: 220 mm, rectangle: 300 x 90 mm, square: 175 mm • Drive power: 4.1 kW / 400 V / 50 Hz • Speed: 3,000 rpm • Cutting speed: 55 m/sec • Blade dimensions: 600 x 50 mm • Max. cutting height: 220 mm • Dimensions: 2,020 x 1,510 x 975 mm • Weight: 650 kg The machine comes complete with a 6 m infeed roller conveyor and matching extraction unit. The saw can be inspected at our warehouse in 09599 Freiberg. Cjdpfx Ajuyyhaodierf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Sorting and crushing line by CFT S.p.A. consisting of: Crodpfxovq I Huj Adisf - CFT S.p.A. receiving hopper with drum screen type: VASCA di LAVAGGIO con ELEVATORE model: L945 1/13 serial number: 24621 year of manufacture: 2013 plastic mesh belt with cleats belt width: 540 mm cleat height: 30 mm distance between cleats: 200 mm conveying height: 1950 mm screen: 1 mm overall dimensions: 3400 mm x 2950 mm x 1950 mm. - Belt conveyor, loading/inspection belt CFT S.p.A. inspection belt with work platform type: NASTRO di CERNITA model: L945-313 serial number: 24622 year of manufacture: 2013 plastic belt belt width: 600 mm overall dimensions: 4200 mm x 2800 mm x 1680 mm. - Stainless steel tank with volume sensor - Elevating/loading conveyor with cleats CFT S.p.A. plastic belt with cleats belt width: 600 mm cleat height: 120 mm distance between cleats: 700 mm conveying height: 3100 mm overall dimensions: 5000 mm x 1900 mm x 3900 mm. - CFT S.p.A. crusher with progressive discharge pump type: TRITAGHIACCIO model: CR 2 serial number: 24602 year of manufacture: 2013 internal hopper dimensions: 950 mm x 1000 mm x 900 mm overall dimensions: 5800 mm x 2100 mm x 3500 mm. - Receiving/bin/hopper tank with volume sensor dimensions: 1750 mm x 1600 mm x 1250 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2011/67/47, premer žaginega lista: 420 mm, vhodna napetost: 400 V, izvrtina žagine plošče: 40 mm, vhodni tok: 6 A, Ponujamo zelo dobro ohranjeno GRAULE ZS 170 N za poševno in kotno žaganje aluminija in lesa, letnik 2011. Tip: ZS 170 N Letnik/serijska številka: 2011/67/47 Premer žaginega lista: 420 mm Premer odprtine: 40 mm Nazivna napetost: 400/230 V Nazivni tok: 6,4/11,0 A Credpfjy D Nkgjx Adisf Frekvenca: 50 Hz Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: novo, Leto izdelave: 2026, Product Innovation: Sawing Line Type "ORIX" The ORIX sawing line enables fully automatic processing of a wide variety of aluminium profiles. The machine features a sturdy base frame. For the positioning of the saw unit, linear guides and precision carriages are used. The drives are equipped with servo motors. During the cutting process, the saw unit moves forward 300 mm along the Y-axis, making it possible to cut special profiles, plates, as well as Item and Bosch profiles with ease. The support table consists of movable rollers that are automatically positioned according to the required cut length. All rollers are also mounted on precision linear carriages. Additionally, the saw features a robust discharge table where the cut aluminium parts are deposited. (Optionally, cut parts can also be transported directly away on a conveyor belt, including the removal of chips.) The machine is available with a cut length of 6,000 mm, bringing the total length to 7,000 mm. The saw line is delivered with a matching 2-channel minimum quantity spray system. The system can be fitted with either a 400 mm or 600 mm saw blade. Your benefits: • Hardly any scratches, as the material is not slid over a cast iron table • Improved disposal of saw chips (no extraction necessary) • Extremely compact footprint: 4,000 mm / 7,000 mm • Smaller residual piece (50 mm residual length) • Safe operation (light curtain) • Easy material removal (conveyor belt or brush table) • No need for resetting as required with standard automatic saws Codpfefu Tgrsx Adiorf • No loss of dimensions • Plug-in rollers accommodate any special profile form-fit for perfect cutting results Operating Process Enter the profile length into the control unit. The saw unit then moves to the specified length. The operator loads the aluminium profile and starts the machine. The saw locates the head cut position via a head cut recognition sensor. The head cut is executed. After cutting, the saw unit retracts and is repositioned to the next specified coordinate to repeat the cutting process. These operations repeat until the profile has been fully cut. All parts are gently deposited on the discharge table or conveyor belt. Material clamping is performed, as in conventional aluminium saws, by vertical and horizontal clamps directly at the saw unit. Once the profile is cut, the saw unit automatically moves back to the next loading position. The process can then be repeated. Optionally, cross feeders for automated profile feed can be used. For safety, fences or a light curtain can be integrated. The control system is available in two versions: 1) Diethei control, 2) Siemens control. Optional sorting of materials into various containers or by length is also possible. You are welcome to visit and inspect the machine at any time in our production/showroom facility. Please feel free to contact us! We look forward to your enquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specifically developed for cutting profile and solid materials made of aluminium castings, copper, and hard plastics. An automatic material feed as well as automatic cutting motion make it ideal for fast and precise series production! Material feed is up to 700 mm per stroke. Multiple strokes for longer sections can be conveniently programmed from the control panel. The main vice clamps the material using two horizontal and two vertical clamping cylinders; the feed vice uses one horizontal and one vertical clamping cylinder. Cutting and feed speeds are adjustable according to the material being processed via the large, clearly laid out control panel. The machine features a mechanical stroke height adjustment, with a maximum cutting height of 100 mm. A large protective hood covers the entire working area and is pneumatically lifted at the push of a button. The standard configuration for the UK 350 A 90° CNC + drilling unit includes an air blow gun for cleaning the machine. Connections for chip extraction systems are provided. This machine is equipped with the TR 14 vertical drilling unit (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Equipment: • Machine for 90° cuts, with powerful drive motor • CNC control; input of quantity and section length conveniently via the large, user-friendly control panel • Storage for up to 20 cutting programs • Servo-driven feed; single stroke feed up to 700 mm (for longer sections, the feed is automatically repeated up to the desired length) • Main vice with 4 pneumatic clamping cylinders – 2 horizontal, 2 vertical Credpfx Adjkqz H Doisf • Feed vice with pneumatic horizontal and vertical clamping cylinders • Large protective hood, covers the entire working area, pneumatically lifted • Variable adjustment of cutting and feed speed • Maximum cutting height 100 mm • Air blow gun for machine cleaning • Connections for extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with tool holder • Spindle speed, drilling depth, etc. are set via the machine control; drilling cycle is automatic Technical Data: Drive power: 1.9 kW / 400 V / 50 Hz Speed: 3000 rpm Blade size: 350 x 32 mm Material feed per stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Optional loading magazine available! We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! Csdpfx Adopa Nxdjisrf The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic Codpfx Adeidun Djiorf The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials only to a limited extent). The machine is characterized by its ease of use, quick and convenient material change, and simple mitre angle adjustment. The UK 352 P features a continuously adjustable mitre range—up to 45° to the left and up to 0° to the right. The saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical clamping cylinders. The standard scope of delivery includes a minimum quantity lubrication system and an air blow gun for cleaning the machine. The machine is equipped with connections for a chip extraction system. Features: - Manual guidance of the saw blade - Double mitre 30° – 90° – 0°, large support plate - High-performance drive motor - Clearly structured control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, can be moved back to increase cutting capacity - Large protective cover, fully shields the working area Codpeidunvsfx Adisrf - Minimum quantity lubrication system - Air blow gun for cleaning the machine - Saw blade Ø 350 mm Work Process: 1) Set the cutting angle 2) Insert the material 3) Position the clamping cylinders up to 20 mm from the material 4) Pneumatically clamp the material 5) Press the start button to activate the saw blade 6) The cutting operation must be carried out manually using the hand lever 7) After completing the cut, switch off the machine! You are welcome to inspect the desired machine in our production/demo hall at any time. Please feel free to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH