Nastavljiva kotna žaga za aluminij in les

GRAULE ZS 170 N

Stanje: novo, Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - Included: - Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - - without machine stand and saw blade - Included: - Machine Stand GRAULE for type ZS 135 N and ZS 170 N Included: - Infeed Roller Conveyor GRAULE type RO complete with support legs and connecting angle Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Lhsdpfxju R Sypj Ahujh Support legs for roller conveyor height 885 +/- 10 mm Included: - Roller Conveyor/Length Stop GRAULE type RLK with scale and material stop foldable to the rear. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm - new showroom machine -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Lodeucfwpspfx Ahuehh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, številka stroja/vozila: 1996/1/20, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230.400 V, vhodna frekvenca: 50 Hz, premer žaginega lista: 420 mm, vrsta nastavitve višine: mehanski, izvrtina žagine plošče: 40 mm, vrsta aktuacije: ročni, skupna dolžina: 9.000 mm, skupna širina: 1.400 mm, skupna višina: 1.800 mm, višina mize: 900 mm, leto zadnje generalne obnove: 1996, Oprema: CE označba, GRAULE ZS 170N Abläng- und Gehrungskreissäge - schwenk und neigbar – Sägeblattdurchmesser: 420 mm Nennspannung: 400/230 V, 50 Hz Elektronische Anzeige für Gehrung und Neigung neigbar nach links 45 °, nach rechts bis 25 ° links schwenkbar bis 60° rechts schwenkbar bis 45° Schnitthöhe 170 mm Schnittbreite 430 mm bei 90° Inklusive Maschinenständer und Sägeblatt Zubehör: Zufuhrrollenbahn GRAULE komplett mit Stützfüßen und Anschlusswinkel Kugelgelagerte Kunststoffrollen Ø 40 mm, Rollenbreite 300 mm, Rollenabstand ca. 300 mm, Stützfüße für Rollenbahnhöhe 885 +/- 10 mm Rollenbahn mit Handradlängenanschlag GRAULE mit elektronischer Längenanzeige SIKU Lhjdpszbh Hgsfx Ahueh pneum. nach hinten wegklappbarer Materialanschlag. Kugelgelagerte Kunststoffrollen Ø 40 mm, Rollenbreite 300 mm, Rollenabstand ca. 300 mm, Stützfüße für Rollenbahnhöhe 885 +/- 10 mm Späneabsaugung

Stanje: novo, Description: - Crosscut and mitre circular saw with a maximum cutting height of 170 mm - Saw head adjustable in two planes for mitre cuts - Sturdy cast iron construction - Precision ball bushing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Quick mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable fixed stops at 90° and 45° - Lower blade guard connectable to extraction system Scope of delivery: 1 x Graule crosscut and mitre circular saw, Type ZS 170 N incl. surcharge for 3 kW 400 Volt motor Lhjdpovwf Rdjfx Ahush 1 x machine stand for types ZS 135 N and ZS 170 N Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 420 mm - Extraction connection diameter: 100 mm - Weight: 120 kg

Stanje: novo, as well as other types, as a package Lsdpof Ddzqofx Ahuehh

Stanje: novo, Description: - Crosscut and mitre circular saw with a maximum cutting height of 170 mm - Saw head manually adjustable for mitre cuts on two planes - Robust grey cast iron construction - Precision linear ball bearing guide for the saw head on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable positive stops at 90° and 45° - Lower blade guard can be connected to an extraction system Scope of delivery: 1 x Graule crosscut and mitre circular saw type ZS 170 N incl. surcharge for 3 kW 400 Volt motor Technical data: - Motor: 400 V / 3.0 kW - Speed: 3,500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 90°-45° (tilts left) Lodpfxovwf N Ts Ahuohh - Saw blade diameter: 420 mm - Extraction connection diameter: 100 mm - Weight: 120 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina žagine plošče: 40 mm, Oprema: dokumentacija / priročnik, Krožna žaga za vzdolžne in poševne reze Tip: ZS 170N Motor: 400 V / 2,0 kW Hitrost vrtenja: 3500 obr/min Dolžina reza: 410 mm (pri 90°) Višina reza: 170 mm (pri 90°) Območje poševnih rezov - horizontalno: 45°-90°-25° Območje poševnih rezov - vertikalno: 90°-45° (levo) Premer žaginega lista: 420 mm Premer odsesovalnega nastavka: 100 mm Lodpfx Ahoypwhpjuehh Teža: 120 kg

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Ljdpfx Ajdy Hm Dshuohh Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: novo, Saw blade diameter: 420 x Ø 40 mm Cutting diameter: 170 mm Cutting length: 410 mm Saw blade dimensions: 420x3.2/2.4x40 mm Speed: 3500 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight: approx. 120 kg Space requirement: approx. 1300 x 800 x 1600 mm - Crosscut and miter circular saws for cutoff cuts * Drive motor 3.0 kW - 400 Volt - Dual-sided miter adjustment (60° / 45°) with fixed stops - Compound cut 45° on both sides with fixed stops - Robust grey cast iron construction - Precision linear ball bearing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Infinitely variable saw blade height adjustment - Connection stub for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound cut setting via hand crank, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminum and plastic - Infinitely adjustable hydraulic feed brake Ledpjxabztofx Ahuehh - Pneumatic material clamping from above, consisting of: * 2 adjustable vertical clamping cylinders with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: rabljeno, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Lodpfxeiixxnj Ahuehh Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm Lsdpfsh Ek Daex Ahushh - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 2024/121/47, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 420 mm, GRAULE crosscut and mitre circular saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Lhodjtwz Tlopfx Ahueh Cutting height: 170 mm Blade tilted at 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine tiltable from behind on both sides by hand crank: from 90° to the left up to 45° and to the right up to approx. 30°, up to approx. 60° 1 pc. TCT (carbide-tipped) circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative hook angle for wood 1 pc. machine stand