Singer 191 D300Aa nakup rabljenega (201)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Rcedpfx Ajmhhy Nsmfof - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Here we offer a Mitsubishi industrial 6-axis articulated robot. Mitsubishi Industrial 6-Axis Articulated Robot 6-Axis Articulated Robot RV-3SDB-S15 The RV-3SDB articulated robot is specifically designed for handling loads of up to 3.5 kg. The IP65-compliant enclosure ensures reliable operation under extreme conditions. Key Features: - Adjustable axis compliance for workpiece tolerance compensation - Conveyor tracking - Sensorless collision detection - Fully enclosed design - Adaptive speed optimization Specification/Function: Degrees of Freedom (number of axes): 6 Type: Standard (oil mist) Mounting: Floor, wall or ceiling installation possible (wall mounting with restrictions on J1 axis) Construction: Vertical articulated arm Drive system: AC servo (all axes with brake) Position detection: Absolute encoder Range of Motion (degrees): Base (J1): 340 (−170 to +170) Shoulder (J2): 225 (−90 to +135) Elbow (J3): 191 (−20 to +171) Lower arm rotation (J4): 320 (−160 to +160) Wrist pitch (J5): 240 (−120 to +120) Wrist rotation (J6): 720 (−360 to +360) Motion Speed (degrees/s): Base (J1): 250 Shoulder (J2): 187 Redpfx Amszdiukefjcf Elbow (J3): 250 Lower arm rotation (J4): 412 Wrist pitch (J5): 412 Wrist rotation (J6): 660 Maximum resultant speed: 5500 mm/s Rated payload: 3 kg, maximum payload: 3.5 kg Reach radius (to J5 axis pivot): 642 mm Weight: 37 kg Robot controller CR1DA-721-S15 (230V) Teach Pendant R46TB with color/touch display Technical Data: Dimensions (W × H × D): 252 × 240 × 114 mm Weight: 1.25 kg Connection type: - Connection to robot controller via round connector, cable length 7 m - Interface: RS422 - For connection to the robot controller Display/Monitor: - 6.5" TFT touchscreen with backlight and 640 × 480 pixel resolution, - Touchscreen operable with finger or stylus Model: Mitsubishi Melfa RV-3SDB-S15 Condition: Used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Leto izdelave: 2020, stanje: novo, Krauss Maffei touch panel, latest version for MC5/MC6, spare parts Width: 37 cm Redpsqvuicefx Amfscf Height: 47 cm Depth: 8 cm

Leto izdelave: 2004, stanje: dober (rabljeno), Stroj za brizgano oblikovanje do 5.000 kN Tip stroja: Krauss Maffei KM 2300-12000 MC Letnik izdelave: 2004 Nadzorni sistem: CNC MC4 Delovne ure: 93.900 ur TEHNIČNI PODATKI Zapiralna enota Zapiralna sila: 23.000 kN Sila za odpiranje orodja, maks.: 1.420 kN Potisna sila premične plošče (odpiranje): 227 kN Potisna sila premične plošče (zapiranje): 203 kN Površina za pritrditev orodja (Š x V): 2.830 mm x 2.400 mm Razdalja med stojali (Š x V): 2.000 mm x 1.600 mm Hod za odpiranje orodja: 2.600 mm Minimalna višina orodja: 1.100 mm Maksimalna višina orodja: 1.800 mm Maksimalna razdalja orodja: 3.700 mm Hidravlični hod izmetalnika: 350 mm Sila izmetalnika naprej/nazaj: 415/115 kN Premer vijačnega valja: 135 mm Razmerje Ls/D: 23 Brizgalni tlak: 1.389 bar Prostornina hoda: 8.588 cm³ Teža odlitka (PS): 7815 g Rsdozi Sfzjpfx Amfecf Brizgalna zmogljivost: 1.019 cm³/s Število vrtljajev vijačnega valja: 113 vrt/min Maksimalna zmogljivost plastifikacije: 191 g/s Tlak v šobi: 241 kN Električna in hidravlična oprema Nazivna moč motorja črpalke: 132 kW Vgrajena moč grelnja: 997 kW Število nastavljivih grelnih con cilindrov: 7 Število sušilnih ciklov: 350 1/h Prostornina rezervoarja: 2500 l Dimenzije in teža Dimenzije stroja: 15,15 m x 4,15 m x 3,29 m Skupna teža stroja: 143.000 kg Maksimalna teža kalupa: 62.000 kg Robot LRX 1000 Os X: 2.000 mm Os Y: 3.000 mm Os Z: 5.000 mm

Stanje: zelo dobro (rabljeno), Manufacturer: Grundfos Model: NB80-250/220 A-F-A-BAQE Speed for pump data: 2940 rpm Rated flow rate: 73.1 m³/h Rated head: 57.6 m Actual impeller diameter: 222 mm Nominal impeller diameter: 250 mm Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 65 Pump outlet: DN 50 Pressure rating: PN 16 Net weight: 191 kg Rjdpfsncd A Nex Amfscf Gross weight: 216 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Raznoliki rabljeni rezkarji za zobate letev / skupinski rezkarji za zobate letev različnih proizvajalcev Naše cenovne predstave so neto s kraja prevzema, brez stroškov embaliranja, od € 170 dalje. Posamezne cene so naslednje: Proizvajalec Arnold Dold GmbH & Co.KG Modul 0,5 – skupinski rezkar – cena € 370,-- Modul 0,7 – skupinski rezkar – cena € 380,-- Modul 0,9 – TIN prevleka – cena € 530,-- Modul 1 – na voljo 2 kosa – skupinski rezkar – cena € 390,-- Modul 1,25 – skupinski rezkar – cena € 410,-- Modul 1,5 – TIN prevleka – cena € 750,-- Modul 1,75 – skupinski rezkar – cena € 730,-- Modul 2 – 4 utori – poškodba – 1,89 kg – cena € 210,-- Modul 2 – TIN prevleka – cena € 770,-- Modul 2,5 – 8 utorov – poškodba – 13,52 kg – cena € 470,-- Modul 3 – poškodba – 13,29 kg – cena € 230,-- Modul 3 – 7 utorov – ponovno brušen – 13,77 kg – cena € 200,-- Modul 3 – 3 utori – cena € 290,-- Modul 3 – TIN prevleka – cena € 520,-- Modul 5 – 4 utori – ponovno brušen – 12,15 kg – cena € 170,-- Modul 5 – 4 utori TIN prevleka – cena € 750,-- Modul 6 – 3 utori TIN prevleka – cena € 760,-- Modul 6 – 3 utori TIN prevleka – ponovno brušen – 11,16 kg – cena € 400,-- Modul 7 – 3 utori ponovno brušen – 11,41 kg – cena € 430,-- Modul 8 – 3 utori ponovno brušen – 5,28 kg – cena € 190,-- Modul 8 – ponovno brušen – cena € 450,-- Modul 8 – TIN prevleka – cena € 780,-- Rcsdpsytrh Esfx Amfef Modul 10 – TIN prevleka – cena € 790,-- Modul 10 – ponovno brušen – finiš rezkar – 0,515 kg – cena € 320,-- Modul 12 – 2 kosa – TIN prevleka – finiš rezkar – cena € 580,-- Modul 13 – finiš rezkar – cena € 410,-- Modul 14 – ponovno brušen – 5,18 kg – cena € 240,-- Modul 16 – cena € 600,-- Modul 16 – ponovno brušen – 5,14 kg – cena € 300,-- Vpadni kot: 20° BPII-Ü Premer izvrtine [mm] 40; 50; Utor [mm] 10; 12 Širina [mm] 32,5; 45,5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Zunanji premer [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Proizvajalec Saazor - Wälztechnik ZORN GmbH & Co. KG Modul 1 – 16 utorov, TIN prevleka – poškodba – 10,18 kg – cena € 510,-- Modul 1 – 16 utorov, TIN prevleka – cena € 590,-- Modul 1,5 – 9 utorov, skupinski rezkar – cena € 560,-- Modul 2 – zobati rezkar – cena € 390,-- Modul 6 – zobati rezkar – cena € 640,-- Modul 10 – TIN prevleka – cena € 350,-- Vpadni kot: 20° DIN 3972 II – Ü ali DIN 3972 II Kl. A – Ü Premer izvrtine [mm] 40 Utor [mm] 10 Širina [mm] 52/60; 55/85; 60/90; 33/40 Zunanji premer [mm] 176; 200; 198; 199 Proizvajalec Klingelnberg Modul 2,5 – cena € 360,-- Modul 2,75 – cena € 380,-- Modul 3,25 – cena € 170,-- Modul 3,75 – cena € 200,-- Modul 4,5 – cena € 220,-- Vpadni kot: 20° Premer izvrtine [mm] 40 Utor [mm] 10 Širina [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Zunanji premer [mm] 148; 149; 150 Za vse tehnične podatke pridržujemo možnost napak in pisnih napačnih podatkov. Prodaja izključno v države EU.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. Rcjdpfx Aomkixwomfjf When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: rabljeno, Leto izdelave: 1999, Transnorm Belt Curve Conveyor Left GKF 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the delivery scope, but are optionally available upon request. Belt curves are frequently used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guiding system ensure the smoothest possible operation. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Frame width (NB): 775 mm Belt width (GuB): 600 mm Height (BH): 190 mm Inner radius (IR): 600 mm Conveying angle: 90° Incline: 191 mm / 90° = 764 mm / revolution (360°) Support legs: optionally available Conveying speed (v m/s): Please contact us Drive: SEW gear motor with brake SA37/T DT80K4/MM05/BW1 Rcodpfx Amjk Abtpjfjf Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double-layered, green, smooth, KT36 (wear as per pictures) Year of manufacture: 1999 Optionally available: Supports Lateral guide (one-sided or double-sided) All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For a personalised, professional consultation, please get in touch with us. Contact us by phone or e-mail. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, 123 RABLJENA linija Koenig LAURIN 1000/800 + Mini Rex Futura. Linija po remontu pri pooblaščenem prodajalcu Koenig, pripravljena za delo. TEHNIČNI PODATKI: - gramatura deljenja in zaokroževanja: 25-130 g, - vrste pekovskih izdelkov: okrogla in podolgovata žemlja, - zmogljivost: 2000-3000 kos/h, - polaganje na pekače: 60x80, 60x100, 80x100. ODTISKOVANJE IN ŽIGOSANJE: - žemlja kajzerica - rezana žemlja (šnitka) - poznańska žemlja - žemlja stokrotka ZUNANJE MERE (v cm): Rsdew Su Dmepfx Amfscf - višina: 180, - dolžina: 328 (z odprto mizo: 383), - širina: 153 (z odprtim pokrovom: 191). Naprave ponujamo v različnih tehničnih stanjih in po različnih cenah: 1. Neposredno iz pekarne. 2. Po servisu z zagonsko garancijo. 3. Po obnovi z garancijo 6-12 mesecev. Naprava pripravljena za ogled se nahaja v našem skladišču (36-068 Bachórz, Poljska). Na voljo so plačljive opcije: obnova / transport / montaža / zagon. Navedena cena je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZKO, RUSKO, UKRAJINSKO.

Stanje: zelo dobro (rabljeno), LOMILNIK / DROBILEC / MLIN ZA ODPADNI STIRENPEN – GRINDER N. 1 Na prodajo profesionalni, zmogljivi drobilec (lomilnik/mlin) za odpadni stiren, namenjen delu v neprekinjenem tehnološkem procesu. Za razliko od samostojnih strojev, kjer je treba odpad ročno ali s transportnim trakom dovajati, je ta naprava konstrukcijsko prilagojena za vgradnjo neposredno pod linijo za rezanje stirena. Samodejno prejema, drobi ter zmanjšuje prostornino odpadkov (bočnih in spodnjih), ki med procesom rezanja pristanejo na transportnem traku. Cena: 5.900 EUR (znižano iz 6.500) Tehnične specifikacije: Zunanje dimenzije (d x š x v): 191 cm x 120 cm x 64 cm Dimenzije dovodne odprtine: 148 x 38 cm Pogon: motor-reduktor 7,5 kW Obe gredi sta gnani (z zobniki) Redpjzc Hnlefx Amfscf Tagi: drobilec, drobilec stirena, mlin, mlinček za stiren, naprava za recikliranje, reduktor prostornine, uničevalec stirena, kompaktor, konverter odpadkov.

Stanje: rabljeno, Leto izdelave: 2007, Delovni čas: 20456 ur Čas delovanja vretena: 75180 ur Krmilnik: FANUC 310 i Premer vpenjalnika: 175 mm Število vrtljajev: 5.000 min-1 Masa stroja: približno 8800 kg Potreben prostor: približno 4500 x 1990 x 2300 mm Število vreten, ki jih je mogoče nadzorovati (os C): 2 Število osi, ki jih je mogoče nadzorovati: 8 Število kanalov: 3 Maks. premer palice: 65 mm Luknja v vlečni palici: 75 mm Premer vpenjalnika: 175 mm Nos vretena: 140 mm Maks. število vrtljajev: 5.000 min-1 Nazivni navor: 191 Nm Nazivna moč: 20 kW PODATKI O OSI W2 PROTIVRETENA Hod: 690 mm Hitri hod: 30 m/min Maks. pospešek: 5 m/s² Nazivna sila: 2.400 N PODATKI O OSI X1 Hod: 165 mm Hitri hod: 40 m/min Maks. pospešek: 10 m/s² Nazivna sila: 2.400 N PODATKI O OSI Z1 Rcedpfx Aoydfq Ismfef Hod: 678 mm Hitri hod: 30 m/min Maks. pospešek: 5 m/s² Nazivna sila: 5.000 N PODATKI O OSI Y1 Hod: 80 (+50/-30) mm Hitri hod: 30 m/min Maks. pospešek: 5 m/s² Nazivna sila: 5.000 N PODATKI O OSI X2 Hod: 165 mm Hitri hod: 30 m/min Maks. pospešek: 5 m/s² Nazivna sila: 5.000 N Število orodjarskih pozicij: 12 Premer vpenjalnika za orodje: 30 mm Pogonske pozicije: 12 mm Maks. število vrtljajev pogonjenega orodja: 4.000 min-1

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 191 RABLJEN DELILEC za ciabatto, kvadratna testa, v kompletu s strojem za posipanje semen Lippelt. OPREMA: Rodsxqy Uyepfx Amfscf - giljotina, - nož za izrezovanje vzorcev, - rezervoar za različna semena, - namakanje testa v vodi. Navedena cena je neto. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZKO, RUSKO, UKRAJINSKO.

Stanje: rabljeno, Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, drive motor, traction motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump, hydraulic power unit from Jungheinrich electric forklift, type ECE 20 -Hydraulic pump: Type 0 542 015 191 -Motor: Type 1 547 220 524, 24 V, 2.2 kW -Includes: tank and control valve Rcjdpfsi Aqbcex Amfjf -Quantity: 2 units available -Price: per unit -Dimensions: 220/120/H370 mm -Weight: 9 kg/unit

Stanje: rabljeno, Leto izdelave: 2008, Premer gredi: 65 mm Število vrtljajev: 5.000 min-1 Delovne ure: 34.979 ur Ure delovanja vretena: 72.260 ur Nadzorni sistem: FANUC 310 i Masa stroja: pribl. 8.800 kg Potreben prostor: pribl. 4500x1990x2300 mm Število nadzorovanih vreten (osi C): 2 Število nadzorovanih osi: 8 Število kanalov: 3 Rcjdpfxsyat Hvo Amfof Maksimalni premer gredi: 65 mm Premer luknje v vlečni palici: 75 mm Premer vpenjalne glave: 175 mm Nos vretena: 140 mm Maksimalno število vrtljajev: 5.000 min-1 Nazivni navor: 191 Nm Nazivna moč: 20 kW PODATKI O OSI W2 PROTIVREMENA Hod: 690 mm Hitrost pri hitrem premiku: 30 m/min Maksimalno pospeševanje: 5 m/s² Nazivna sila: 2.400 N PODATKI O OSI X1 Hod: 165 mm Hitrost pri hitrem premiku: 40 m/min Maksimalno pospeševanje: 10 m/s² Nazivna sila: 2.400 N PODATKI O OSI Z1 Hod: 678 mm Hitrost pri hitrem premiku: 30 mm Maksimalno pospeševanje: 5 m/s² Nazivna sila: 5.000 N PODATKI O OSI Y1 Hod: 80(+50/-30) mm Hitrost pri hitrem premiku: 30 m/min Maksimalno pospeševanje: 5 m/s² Nazivna sila: 5.000 N PODATKI O OSI X2 Hod: 165 mm Hitrost pri hitrem premiku: 30 m/min Maksimalno pospeševanje: 5 m/s² Nazivna sila: 5.000 N Število postaj za orodja: 12 Premer vpenjalnega sistema za orodja: 30 mm Pogonjene postaje: 12 mm Maksimalno število vrtljajev pogonjenih orodij: 4.000 min-1

Stanje: zelo dobro (rabljeno), Stroj je priložen z ustreznim napajanjem. Volumen doze: 0,1 ml - 9.999 ml Rcsdpfoyn Egqjx Amfof Pretok: 0,6 ml/min – 5 L/min Notranji premer cevi: 1 – 8 mm Debelina stene cevi: 1,5 mm Dimenzije (V x Š x G): 203 x 210 x 191 mm Teža: 3,5 kg Vmesnik: 2x RS232 Vhodna napetost: 100 – 240 VAC 50/60 Hz

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Redpfxsmhhf Sj Amfocf Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing Rcjdpfomhh Dtjx Amfsf - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, prevoženi kilometri: 284.972 km, moč: 71 kW (96,53 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, konfiguracija osi: 4x2, medosna razdalja: 3.200 mm, prva registracija: 05/2014, kapaciteta rezervoarja za gorivo: 75 l, Izpusti CO₂: 195 g/km, emisijski razred: Euro 5, barva: modra, število sedežev: 3, število prejšnjih lastnikov: 2, Leto izdelave: 2014, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), klimatska naprava, meglenke, navigacijski sistem, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, Splošne informacije Število vrat: 5 Obdobje modela: september 2010 – november 2014 Koda modela: W639 Kabina: enojna Tehnične informacije Navor: 250 Nm Število valjev: 4 Rcsdpfjzk U Eaox Amfef Prostornina motorja: 2.143 cm³ Menjalnik: 6 prestav, ročni Pospešek (0–100): 18,1 s Največja hitrost: 158 km/h Mere Dolžina/višina: L2H1 Dimenzije (D x Š x V): 476 x 191 x 197 cm Teže Lastna teža: 1.830 kg Nosilnost: 970 kg Dovoljena skupna masa: 2.800 kg Notranjost Notranjost: črna, usnje Poraba Povprečna poraba goriva: 7,4 l/100 km Poraba goriva v mestu: 9 l/100 km Poraba goriva zunaj mesta: 6,4 l/100 km Vzdrževanje, zgodovina in stanje Tehnični pregled (APK): veljaven do 07.2027 Število ključev: 2 (2 daljinska upravljalnika) Varnost izdelka Proizvajalec: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Dodatne možnosti in oprema = - Varnostni blazin za sopotnika - Sedež za sopotnika - Pripomoček za telefon (prostoročna naprava) - Tretja zavorna luč - Električni pomik stekel spredaj - Električno nastavljiva zunanja ogledala - Varnostni blazin za voznika - Daljinsko upravljanje centralne zaklepanje - Zadahna vrata - Lesena obloga - Nastavljiv sedež voznika po višini - Nastavljiv volan po višini - Tovorni prostor - Naslon za roko spredaj - Meglenke - Kamera za vzvratno vožnjo - Stranska drsna vrata na desni strani - Blokada motorja - Telefon z Bluetoothom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth Rodpjmhh Dhjfx Amfscf - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Rsdpfx Amomhhx Isfjcf - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Rsdpomhh Anjfx Amfscf We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Rjdpfsmhh Dzox Amfocf - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth Rcodpfx Amemhhyaofsf - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, HSC rezkalni stroj DIGMA 500GC Rcodpfxoy Hqauj Amfef Serijska št.: 05-191 Leto izdelave: 2001 Krmiljenje: Heidenhain TNC 426

Stanje: dober (rabljeno), Geared motor, electric motor, electric geared motor - Manufacturer: SEW-Eurodrive, geared motor - Type: R40DT80N2TF Rodpog Avpxsfx Amfecf - Speed: 191 rpm - Power: 1.1 kW - Design: B3 - Shaft: Ø 25 x 50 mm - Protection class: IP 54 - Dimensions: 457/146/H210 mm - Weight: 18 kg