Mecalux Palettenregalständer 400Cm Höhe nakup rabljenega (925)

Stanje: rabljeno, Leto izdelave: 2017, Mecalux valjčni transporter/valjčna steza 1350-540-450 RA1908 Proizvajalec: Mecalux Širina valjev (RB): 450 mm, jekleni valji Nazivna/zunanja širina (NB): 540 mm Dolžina: 1350 mm Višina okvirja: 130 mm Premer valja: 50 mm Razmak med valji: 75 mm Pogon valjev: 2x ITOH-Deki 16936/010 Transportna hitrost: s frekvenčnim pretvornikom prosto nastavljiva med 0,543 in 0,95 m/s Obseg dobave: brez podpor Opcijsko na voljo: Kodpfx Agek Abk Djfedt Podpore Bočno vodenje enostransko ali obojestransko Za individualno in strokovno svetovanje nas preprosto kontaktirajte. Pokličite nas ali nam pišite po elektronski pošti. Z veseljem vam svetujemo pri načrtovanju in realizaciji vaših projektov. Veselimo se vašega odziva. Lep pozdrav, Vaša ekipa Dr. Sonntag GmbH & Co. KG Vaš specialist in kontaktna oseba za intralogistiko.

Stanje: rabljeno, prosta razpetina: 3.595 mm, skupna dolžina: 18.575 mm, skupna višina: 9.500 mm, obremenitev na par nosilcev (maks.): 2.650 kg, Tehnični podatki za paletni regalni sistem: Sistem regalov: Mecalux Tehnični podatki za montažo: Število regalnih vrst: 01 kos Dolžina na regalno vrsto: približno 18.575 mm Število polj na regalno vrsto: 05 kos, vsako po 3.595 mm Število nivojev, vključno s talno plastjo: 04 kos Tehnični podatki za prostornino: Število palet na polje: 20 kos Število palet na regalno vrsto: 100 kos Skupno število palet: 100 kos Izračunano na podlagi: Pomožno pripomoček za nakladanje: Evropska paleta EN 13698-1 Dimenzije: 1.200 x 800 x 150 mm Skupna višina, vključno s paleto: ni določeno Teža na paleto (maks.): 660 kg V obsegu dobave so vključeni: 06 x stojala za paletne regale, rabljena Barva materiala: modra Dimenzije profila stojala: 100 x 69 x 2,0 mm Tip stojala: M-101-P Vključno s prečnimi in diagonalnimi oporniki, osnovnimi ploščami Stojala so predhodno monterana (vijačno povezana konstrukcija) 9.500 mm visoko 1.100 mm globoko 40 x paletna regalna prečka, rabljena Tip prečke: 2C-S 1315 Barva materiala: oranžna Profil okvirja: 130 x 50 mm Kavljice: 4 HK (kavlji) Čista razdalja: 3.595 mm Maks. obremenitev na par prečk: 2.650 kg, pri enakomerno porazdeljeni obremenitvi 80 x integrirani varnostni zatič, rabljen Za pritrditev vzdolžnih nosilcev pred nenamernim izpadanjem 24 x vijak sidro, novo Proizvajalec: Hilti Označba tipa: HST2 M12x105/10 Izvedba: ogljikovo jeklo, pocinkano Odobreno za: razpokan beton 12 x izravnalna plošča, rabljena Izvedba: popolnoma pocinkana za izravnavo stojal regalov, ki so nameščena na neenakomerni podlagi 01 x ploščica z oznako obremenitve Ksdpfx Agez A Awxjfodt z navedbo obremenitve polja in nosilcev, proizvajalca in številke naročila Dimenzije: 420 x 297 x 3 mm Splošne informacije o izdelku: Ta izdelek se ponuja samo za prevzem. Dodatni transport ali pošiljanje tega izdelka je povezano z dodatnimi stroški, ki se obračunavajo ločeno odvisno od kraja dostave ali obsega dostave in se lahko povpraša pri nas.

Stanje: pripravljen za uporabo (rabljen), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed to meet industrial storage requirements. The modular high-bay rack is ideal for logistics operations, industrial environments, large warehouses, and shipping companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: painted yellow - Uprights: approx. 400 x 105 cm, pre-assembled - Upright colour: painted blue - Levels: floor plus 2 - Pallet spaces: 162 including floor positions - Version: Used Jungheinrich Esmena equipment SCOPE OF DELIVERY: - 019 x uprights (approx. 400 x 105 cm), pre-assembled - 072 x beams (approx. 270 cm) Ksdpfez Dv H Ajx Agfodt - 144 x locking pins Price: €3,530.00 net €4,200.70 gross You will receive an invoice with listed VAT. DELIVERY, INSTALLATION & INSPECTION: - Delivery anywhere in Germany by our partner haulier – freight costs depend on your postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in compliance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether new construction, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! On site, you can get a comprehensive impression of our pallet racking, storage racks, and other solutions. Many systems are assembled and available for hands-on inspection. Our expert advisers are happy to assist you with questions and personalised consultations – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 8:00 AM – 4:00 PM. Alternatively, leave us a message with your name and number and we will get back to you as soon as possible.

Stanje: novo, Leto izdelave: 2022, Cantilever Rack – NEW STOCK Specifications: - Height (H): approx. 400 cm - Depth (T): approx. 137 cm - Length (L): approx. 402 cm - Cantilever Arms: approx. 120 cm - Axle dimension: 131 cm - BRAND NEW, immediately available from stock. - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted Kjdpfxjz Dvdbo Agfedt - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Rack includes: - 4x uprights, incl. base, approx. 400 cm, made from IPE160 - 12x cantilever arms, approx. 120 cm, made from IPE80 - incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racks? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All stated load capacities for uprights and arms are structurally verified at 100% load - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use and will not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt assemblies in accordance with DIN EN 15048-1 - Long-term spare parts availability - Upright base and rear are welded for added safety and reduced installation times, as the bases do not need bolting to the upright backs - Bracings made from angle steel, no adjustment via turnbuckles required; this reduces installation time - No elongated hole system, so the upright profile is not weakened Price: €2,462.00 net + VAT as legally required. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on your postal code. Installation: Our trained personnel are available to assist you with professional installation and dismantling of your facility if required. Our recommendation: Let us know your requirements… We are happy to assist you with your projects, from planning and ordering to installation.

Stanje: rabljeno, Regalna noga: 5000 × 1500 mm, 17 kosov Regalna noga: 5500 × 1300 mm, 8 kosov Regalna noga: 3500 × 1100 mm, 5 kosov Regalna noga: 5500 × 510 mm, 3 kosi Regalni steber: 5000 mm, 11 kosov Prečka: 1350 × 65 mm, 199 kosov Prečka: 1350 × 60 mm, 19 kosov Kedpjxcua Uefx Agfedt Vozičkova tirnica: 8650 mm, 28 kosov Vozičkova tirnica: 7860 mm, 12 kosov Vozičkova tirnica s končnim čepom: 6000 mm, 40 kosov Končni del vozička: 40 kosov Ojačitev regalne noge: 1400 mm, 70 kosov 1 voziček + polnilec + daljinski upravljalnik

Stanje: rabljeno, prosta razpetina: 2.700 mm, skupna dolžina: 14.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Tehnični podatki za paletno regalno konstrukcijo: Sistem regalov: Mecalux Tehnični podatki za montažo: Število vrst regalov: 01 kos Dolžina na vrsto regalov: približno 14.100 mm Število polj na vrsto regalov: 05 kos, vsako po 2.700 mm Število nivojev, vključno z nivojem tal: 02 kosa Tehnični podatki za prostornino: Število paletnih mest na polje: 09 kos Število paletnih mest na vrsto regalov: 45 kos Skupno število paletnih mest: 45 kos osnova za izračun: Nosilno sredstvo za tovor: Evropska paleta EN 13698-1 Dimenzije: 1.200 x 800 x 150 mm Skupna višina, vključno s paleto: ni navedeno Teža na paleto (maks.): 1.000 kg Vključeno v dobavo: 06x stojalo za paletne regale, rabljeno Barva materiala: modra Tip stojala: A103 Profil stojala: 100 x 79 x 3,00 mm Vključno s prečnimi in diagonalnimi oporniki, osnovne plošče Stojala so predmontirana (vijačno povezana konstrukcija) 2.300 mm visoko 1.100 mm globoko 20x prečke za paletne regale, novo Barva materiala: RAL 2001 oranžna Profil prečke: 110 x 50 mm Tip prečke: 2C-S 1115 razdalja med nosilci: 2.700 mm Sponka: G.E. - 3 maksimalna obremenitev na par prečk: 3.000 kg, pri enakomerno porazdeljeni obremenitvi 40x vgrajeni varnostni zatič, novo Barva materiala: oranžna Za varovanje vzdolžnih nosilcev pred nenamernim izvlečenjem 24x močna sidrna vijak, novo Proizvajalec: MKT Izvedba: pocinkano jeklo Odobreno za: nepoškodovan beton Namestitev z vstavljanjem: M 12-13/95 12x izravnalne plošče, rabljeno Izvedba: popolnoma pocinkano za izravnavo stojal regalov, ki so postavljena na neenakomerni podlagi 01x oznake obremenitve z navedbo obremenitve polja in sekcije, proizvajalec in številka serije Dimenzije: 297 x 210 x 2 mm Opomba: Slike so primerne in služijo le za ponazoritev materiala. Navedene količine se lahko v primeru razlikujejo od dejanske dobave. Kdodpfsz A Ayaox Agfst Splošne informacije o izdelku: Ta izdelek se ponuja samo za osebni prevzem. Morebiten dodatni transport oz. pošiljanje tega izdelka je povezano z dodatnimi stroški, ki se lahko posebej povprašajo glede na kraj dostave oz. obseg dobave.

Stanje: dober (rabljeno), Leto izdelave: 2018, Ref. št.: 10531 Proizvajalec: HONOR SEIKI Tip: VL - 400CM Leto izdelave: 2018 Vrsta krmiljenja: CNC krmiljenje Krmilnik: Siemens SINUMERIK 840D Lokacija: Halberstadt Država izvora: Tajvan Št. stroja: 79XXX C-os: da Kdsdpfx Ajzx Nx Dsgfot Hitrost vrtenja C-osi: 50 - 2250 min⁻¹ Višina struženja: 2370 mm Premer mize: 4000 mm Hitrost hitrega pomika X-os: 10 m/min Hitrost hitrega pomika Z-os: 10 m/min Hitrost vrtenja mize: 1 - 85 min⁻¹ Največja teža obdelovanca: 30 kg Največji premer struženja: 4 mm Razdalja med plansko ploščo in prečno konzolo: 820 – 3320 mm Pomik suportne letve: 300 x 300 mm Število orodij v verižniku: 24 Glavni pogonski motor vretena: AC 60/75/100 kW Servomotorji (X/Z osi): 5,5 / 5,5 kW Dolžina stroja: 9 mm Širina stroja: 7000 mm Višina stroja: 8000/9100 mm Teža stroja cca: 115 t Dodatne informacije: - 2-stopenjsko prestavljanje - ATC (avtomatska menjava orodij) 16/20/24 - Velikost orodja 25 x 32 x 40 - Motor za gnano orodje AC 15/18,5 kW Stroj je še vedno v proizvodnji in si ga je možno ogledati po dogovoru.

Stanje: rabljeno, prosta razpetina: 3.595 mm, skupna dolžina: 18.575 mm, obremenitev na par nosilcev (maks.): 2.650 kg, Tehnični podatki za paletno regalno konstrukcijo: Sistem regalov: Mecalux Tehnični podatki za montažo: Število vrst regalov: 01 kos Dolžina na vrsto regalov: pribl. 18.575 mm Število polj na vrsto regalov: 05 kos Število nivojev, vključno z nivojem tal: 02 kos Tehnični podatki za prostornino: Število palet na polje: 12 kos Število palet na vrsto: 60 kos Skupno število palet: 60 kos osnova za izračun: Pomožna oprema za nakladanje: Evropska paleta EN 13698-1 Dimenzije: 1.200 x 800 x 150 mm Skupna višina, vključno s paleto: ni podatka Teža na paleto (maks.): 660 kg Vsebina dobave: 06x stojala za paletne regale, rabljena Barva materiala: modra Dimenzije profila stojala: 100 x 69 x 2.0 mm Tip stojala: M-101 Vključno s prečnimi in diagonalnimi nosilci, osnovne plošče Stojala so predhodno montirana (vijačeno ogrodje) 2.500 mm visoka 1.100 mm globoka 20x prečke za paletne regale, rabljene Barva materiala: RAL 2001 oranžna Tip prečke: 2C-S 1315 Profil prečke: 130 x 50 mm Razdalja med nosilci: 3.595 mm Maks. obremenitev na par prečk: 2.650 kg pri enakomerno porazdeljeni obremenitvi 40x varovalni zatič, rabljen Barva materiala: pocinkano (sendzimir) Za varno pritrditev vzdolžnih nosilcev, da se prepreči nenamerno dvigovanje 24x vijak za sidranje, nov Proizvajalec: Hilti Označba tipa: HST2 M12x105/10 Izvedba: ogljikovo jeklo, pocinkano Odobreno za: beton s razpokami 12x izravnalna plošča, rabljena Izvedba: popolnoma pocinkana Kdsdpfxsz A A Aue Agfet za izravnavo stojal regalov, ki so nameščena na neravnem tlaku 01x ploščica z oznako obremenitve z navedbo obremenitve polja in sekcije, proizvajalca in številko naročila Dimenzije: 420 x 297 x 3 mm Splošne informacije o izdelku: Ta izdelek se ponuja samo za osebni prevzem. Morebitna dodatna dostava oz. pošiljanje tega izdelka je povezano z dodatnimi stroški, ki se ločeno obračunajo glede na kraj dostave oz. obseg dobave.

Stanje: rabljeno, prosta razpetina: 3.300 mm, skupna dolžina: 17.100 mm, skupna višina: 2.500 mm, obremenitev na par nosilcev (maks.): 1.750 kg, Tehnični podatki o sistemu regalov za palete: Sistem regalov: Mecalux Tehnični podatki o postavitvi: Ksdpfxsz A A Dlo Agfsdt Število vrst regalov: 01 kos Dolžina ene vrste regalov: približno 17.100 mm Število polj na eno vrsto regalov: 05 kos Število nivojev, vključno z osnovnim nivojem: 02 kos Tehnični podatki o prostornini: Število mest za palete na eno polje: 12 kos Število mest za palete na eno vrsto: 60 kos Skupno število mest za palete: 60 kos Osnova za izračun: Pomožni pripomoček za nakladanje: Evropska paleta EN 13698-1 Dimenzije: 1.200 x 800 x 150 mm Skupna višina, vključno s paleto: ni podatka Teža na paleto (maks.): 435 kg V obsegu dobave so vključeni: 06 x stojalo za paletni regal, rabljeno Barva materiala: modra Dimenzije profila stojala: 100 x 69 x 2,0 mm Tip stojala: M-101 Vključno z horizontalnimi in diagonalnimi oporniki, osnovnimi ploščami Stojala so predhodno montirana (vijačno povezana konstrukcija) Višina 2.500 mm Globina 1.100 mm 20 x paletni regalni prečnik, rabljen Barva materiala: RAL 2001 oranžna Tip prečnika: TB-S120 Oblika profila: 120 x 50 mm Razpon: 3.300 mm Maksimalna obremenitev na par prečnikov: 1.750 kg pri enakomerno porazdeljeni obremenitvi 40 x varnostni zatič, rabljen Barva materiala: pocinkano (sendzimir) Za varovanje vzdolžnih nosilcev pred nenamernim dvigovanjem 24 x kemični vijak, nov Proizvajalec: Hilti Oznaka tipa: HST2 M12x105/10 Izvedba: ogljikovo jeklo, pocinkano Odobreno za: beton z razpokami 12 x izravnalna plošča, rabljena Izvedba: popolnoma pocinkana Za izravnavo stojal regalov, ki so postavljena na neravnem področju 01 x oznaka obremenitve z navedbami obremenitve polja in sekcije, proizvajalca in številke naročila Dimenzije: 420 x 297 x 3 mm Splošne informacije o izdelku: Ta izdelek je na voljo samo za prevzem. Dodatni stroški za transport ali dostavo tega izdelka so možni in se obračunavajo ločeno, odvisno od kraja dostave oziroma obsega dobave. Za podrobne informacije se obrnite na nas.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard Kedpfxjmkixwj Agfedt - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) Kodpfjmidyfex Agfedt - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: rabljeno, Cena brez DDV. Blago je na voljo tudi v drugih količinah in izvedbah. Ta paket vsebuje: 37 x stebrov po 4.000 mm x 1.100 mm (modri) 37 x zaščit v U-obliko, rabljeno 216 x prečk po 2.700 mm (oranžni) 432 x varovalnih zatičev S tem paketom dobite eno regalno vrsto s 36 polji po 3 nivoje + mesta na tleh = skupaj 408 paletnih mest (800 kg / paleta) Za ta sistem je na voljo cca 280 stebrov in 2.000 prečk. Kontaktirajte nas. Proizvajalec: Mecalux Stanje: rabljeno, dobro ohranjeno Višina: 4.000 mm Dolžina: cca 101 tekoči meter Globina regala: 1.100 mm Križna vez: vijačena Dolžina prečke: 2.700 mm Nosilnost police: 2.400 kg Nosilnost polja: 7.200 kg Paletnih mest: 408 Dodatna oprema, kot npr.: Talna pritrditev Povezovalni elementi Opozorila o obremenitvi Kdjdpjyg I A Eefx Agfet Zaščite pred udarci Vodilne ograje Rešetkaste police Zadnja zaščitna mreža Globinski nosilci Ograje za omejitev ...in še veliko več. Kontaktirajte nas za več informacij!

Stanje: rabljeno, Paletni regal – Rabljen paletni regal – Velika zaloga – Redne dobave – Dostava v Francijo in Evropo Specializirani smo za rabljene industrijske regale in ponujamo široko izbiro paletnih regalov za skladišča, logistična središča, delavnice, trgovine in industrijske stavbe. Zahvaljujoč našim rednim dobavam imamo na voljo veliko zalogo paletnih regalov, ki so že razstavljeni, pregledani in pripravljeni za hitro pošiljanje. Naša zaloga vključuje: * Rabljeni paletni regali * Težki industrijski regali * Regali za shranjevanje palet * Visoki regali * Rešitve za shranjevanje po meri Kedpfxezmykto Agfsdt Na voljo je veliko različnih konfiguracij: * Višina do 12 metrov * Police različnih globin * Police so na voljo v naslednjih velikostih: * 1.800 mm * 2.700 mm * 3.300 mm * 3.600 mm * Nosilnost od 500 do 1.000 kg na paleto (odvisno od konfiguracije) * Številne ravni shranjevanja * Konfiguracija, prilagojena vašemu skladišču Prav tako ponujamo vso potrebno dodatno opremo za popolno namestitev: * Rešetke (žičnate) * Lesene police * Zaščitne podlage za police * Zadnji oporni elementi za palete * Plošče za obremenitev * Distančniki * Zaščita hodnikov * Zaščitna mreža proti padcem (odvisno od razpoložljivosti) * Sidra in pritrdilni elementi Za osebno ponudbo nas kontaktirajte in nam sporočite vaše zahteve. Zakaj izbrati naše rabljene regale? * Do 80 % prihranek v primerjavi z novimi * Takoj na voljo * Robustna industrijska oprema priznanih blagovnih znamk * Idealna rešitev za optimizacijo vaše zmogljivosti skladiščenja * Hitra namestitev * Odlično razmerje med ceno in kakovostjo Naše storitve: * Tehnično svetovanje * Študija prostorske ureditve * Osebna ponudba * Nakladanje na tovornjak * Dostava v Francijo in Evropo * Možnost montaže Izključno za profesionalne uporabnike. Za prejem prilagojene ponudbe nam posredujte naslednje informacije: * Želena višina * Dimenzije vaših palet * Število potrebnih mest * Nosilnost na paleto * Želena dodatna oprema (rešetke, lesene police, zaščitne podlage, oporni elementi za palete, plošče za obremenitev itd.) Kontaktirajte nas, da izveste več o naši trenutni zalogi in izkoristite rešitev za shranjevanje, ki je prilagojena vašim potrebam in ponuja najboljšo ceno.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Kdsdpfjmhhf Ssx Agfot Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Kedpfxemhh Dtj Agfsdt We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. Kdjdpfx Aemhhypjgfjt For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Kdedpfxomhhl Hj Agfet Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: rabljeno, prosta razpetina: 3.300 mm, Tehnični podatki za prečno letveno povezavo paletnega regalnega sistema: Regalni sistem: Mecalux V obsegu dobave so vključeni: 01x prečna letvena povezava za paletni regal, rabljena Tip prečne letvene povezave: TB-S 120 Barva materiala: oranžna Profil prečne letvene povezave: 120 x 50 mm Sponka: 4 HK (kavelj) Širina: 3.300 mm 02x vgrajena varnostna zapornica, rabljena Za zagotavljanje varnosti vzdolžnih nosilcev Kdedpfoz A Anksx Agfst pred nenamernim dvigom Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Morebiten dodatni transport ali pošiljanje tega izdelka je povezano z dodatnimi stroški, ki jih lahko po dogovoru glede na kraj dostave oziroma obseg dostave povprašate pri nas.

Stanje: rabljeno, največja dovoljena obremenitev: 13.020 kg, skupna masa: 16.000 kg, prva registracija: 01/2016, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.525 mm, prostornina tovornega prostora: 45 m³, skupna dolžina: 74.550 mm, skupna širina: 2.550 mm, skupna višina: 2.750 mm, Leto izdelave: 2016, Številka vozila: G0123012 – proizvajalec: Krone. * Enostavne kotne opornice * Označitev obrisa na strani/zadnji strani * Potrdilo o tovornem prostoru, koda: Code-XL * Vrata z valjanjem (aluminij) Kdedsz Dmzwepfx Agfet * Sistem ključavnic v notranjosti * Dostopen za viličar * Trdne oporne noge * Naprava za nakladanje na železniški vagon * Možnosti pritrditve tovora Možnost financiranja. Dobavni rok: TAKOJ. Tehnično pripravljeno za uporabo, brez potrebe po dodatnih popravilih. Delno prebarvano. Podvozje (KTL) s prevleko, ki ima sledove uporabe. UVV veljaven. UVV dokumentacija je na voljo. LASI CODE XL!!! Mere so približne. Ponudba je brez zaveze, pridržana je možnost medprodaje. Cene so navedene neto, ob dobavi iz lokacije D-59302 Oelde. Za dodatne podrobnosti se obrnite na nas po telefonu ali po e-pošti.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) Kjdpeh Ek Daofx Agfjdt - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: rabljeno, Price plus VAT. Goods are also available in other quantities and configurations. This package includes: 11 uprights, 4,500 mm x 1,100 mm (blue) 11 U-profile column protectors, used 60 beams, 2,700 mm (orange) 100 picking beams, 2,700 mm (orange) 50 shelf panels, 270 cm x 110 cm x 22 mm 28 m mesh rear wall, 300 cm high → 84 m² Forms one racking row with 10 bays, each with 8 levels + floor storage area = a total of 90 pallet spaces (800 kg / pallet). 50 picking levels, 270 cm x 110 cm, with 500 kg / space Approx. 280 uprights and 2,000 beams are available for this system. Please contact us for your requirements. Kodpfx Aoyg Ix Hegfedt Manufacturer: Mecalux Condition: used, good condition Height: 4,500 mm Length: approx. 28.10 running metres Racking depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 2,400 kg Bay load: 7,200 kg Pallet spaces: 96 Accessories such as: Floor anchors Connectors Load signage Rack protectors Guard rails Mesh gratings Rear mesh panels Depth support bars Partition rails and much more... Simply ask us for details!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) Kdodpsmhhx Iofx Agfet - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm Ksdpfx Ajmhh Dhegfsdt - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week Kdsdpfxjmhh Ans Agfjt - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) Kdsdpemhhyasfx Agfot - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.