Mecalux / Länge: 851 Mm / C40X25X8Mm / Krovni Nosilec F. Nosilec Za Palete nakup rabljenega (125.162)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Lsdpfx Aemhh Dtob Hehk - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. Lsdpfomhh Dhsx Ab Hehk According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. Ljdpjmhhx Iefx Ab Hehk When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) Lhsdsmhh Anopfx Ab Hsk - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. Lhsdpfx Asmhh Dzjb Hek We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Lsdpfemhhyajx Ab Hshk - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) Lhsdpfxjmhhypo Ab Hek - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: zelo dobro (rabljeno), Obešalna objemka, nosilec Helm tirnice, Helm tirnica, vodilna tirnica, nosilec tirnice, pritrdilna puša, puša za drsna vrata -Proizvajalec: Helm, vodilna Helm tirnica -Tip: profil 500 -Dolžina: 250 mm -Mere: glejte fotografije Lhsdpsv R Tdrjfx Ab Hek -Količina: 122x Helm tirnic na voljo -Cena: na kos -Minimalni nakup: 2 kosa -Dimenzije: 250/65/H60 mm -Teža: 1,3 kg/kos.

Stanje: dober (rabljeno), Included in delivery: 01x Lattice brace, new Manufacturer: Mecalux Material color: Sendzimir galvanized Total length: approx. 1,218 mm Center-to-center hole: approx. 1,164 mm For frame profile width: 100 mm Ø bore hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | each Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Lodpfx Ajv D Hlcsb Hjhk Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra charges will apply, which can be quoted upon request depending on destination and delivery scope.

Stanje: zelo dobro (rabljeno), Izdelan iz težke litine – visoka togost in vzdržljivost. Delovna odprtina cca 120 mm (izmerjeno z merilnim instrumentom). Nastavljivi čepi z vrtljivimi konicami. Pribitje skozi odprtine v osnovi – zanesljiva in stabilna pritrditev. Zelo dobro stanje, popolnoma funkcionalen in pripravljen za uporabo. Odlično se obnese kot podpora pri obdelavi gredi, cevi, palic in drugih elementov, ki med struženjem potrebujejo oporo. Lsdpfxow Sfpte Ab Hjhk

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Lattice bracing strut, new Manufacturer: Mecalux Material finish: Sendzimir galvanized Total length: approx. 1,052 mm Centre-to-centre bore: approx. 998 mm For frame profile width: 100 mm Bore diameter: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.5 kg | per piece Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Shipping or transportation of this item can be arranged at additional cost, which will be quoted separately depending on delivery location and scope of delivery. Lodjv D Ixqopfx Ab Hohk

Stanje: dober (rabljeno), Vijaki, vijaki brez glave, za Bosch profil, konstrukcijski profil, aluminijasti profil, aluminijasti utorni profil, utorni kamen -Vijaki brez glave: navojni zatiči z notranjim šesterokotnikom in čepom, 30 kosov -Navoj: M12 levi Lsdpfx Abjymbixj Hohk -Cena/dobava: 30 kosov -Cena: 6 evrov neto za 30 kosov -Skupna količina: 4000 kosov -Transportne dimenzije: 600/400/V200 mm -Teža: 58 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer valja: 60 mm, širina valja: 870 mm, kotalkanje nagibanje: 150 mm, skupna širina: 952 mm, skupna višina: 200 mm, skupna dolžina: 2.395 mm, transportna dolžina: 2.395 mm, gradbena širina: 952 mm, gradbena višina: 200 mm, TAF-številka artikla: 1000005560 Proizvajalec: neznan Letnik izdelave: neznan Skupne dimenzije (DxŠxV) v mm: 2.395 x 952 x 200 Širina vključujoč rob v mm: 952 Višina roba v mm: 80 Transportna dolžina v mm: 2.395 Transportna širina v mm: 870 Transportna višina v mm: 90 Lodpfexca Ecex Ab Hjhk Razmak med valji v mm: 150 Podkonstrukcija (premična ali s fiksnimi nogami): brez Tip osi nosilnega valja: IGM Premer nosilnega valja v mm: 60 Premer zaviralnega valja v mm: 90 Nosilni valj na os: 1 Material nosilnega valja: jeklo, pocinkano Pogon: gravitacijski Neto masa v kg: Posebnosti: vključno z zaviralnim valjem in razdelnikom Stanje: rabljeno / popolnoma delujoče Funkcionalni preizkus: OK

Stanje: zelo dobro (rabljeno), Profesionalna rezkalna glava priznane znamke Sandvik Coromant. Delovni premer: Ø80 mm – idealna za grobo in fino obdelavo jekla, nerjavečega jekla in litega železa. Vpenjanje: SK40 / ISO40. Model: 346.220242R25. Konstrukcija z izmenljivimi rezalnimi ploščicami – trenutno nameščene ploščice so v dobrem stanju. Visoka natančnost, togost in vzdržljivost – industrijska glava za CNC centre in rezkalke. Originalni izdelek Sandvik – vodilnega proizvajalca rezalnih orodij. Stanje: rabljena, v zelo dobrem tehničnem stanju – pripravljena za takojšnjo uporabo. ✅ Idealna za planiranje, čelno rezkanje in obdelavo večjih površin ✅ Visoka učinkovitost in dolga življenjska doba zahvaljujoč kakovostnim ploščicam ✅ Orodje premium razreda – nemška in švedska kakovost. Lodpfjxld Awjx Ab Hehk

Stanje: zelo dobro (rabljeno), Nosilec, dolžina 2400 mm, rabljen 🧰 Značilnosti izdelka: • Proizvajalec: Stow • Barva: oranžna • Stanje: zelo dobro, glejte fotografije • Širina med nosilci: 2.400 mm • Nosilnost: 1.920 kg na nivo • Profil nosilca: 110 x 50 mm 💰 Cena: 17,00 € neto, brez DDV • Popust pri količinskem nakupu: na zahtevo • Stroški pošiljanja: po vsej Evropi, na zahtevo • Dobavni rok: takoj na voljo • Ogled in prevzem: možno kadarkoli po dogovoru • Številka izdelka: P10446 Lhsdpfx Aezimqlsb Hok Vedno na zalogi več kot 5000 tekočih metrov paletnih regalov različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do medprodaje! Glejte naše splošne pogoje, vse cene so brez DDV, iz skladišča.) Lenox Trading – vrhunska skladiščna tehnika in regalni sistemi za težke obremenitve, rabljeni in novi Opis: Iščete visokokakovostne skladiščne regale za nakup? Lenox Trading je z okoli 100 zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno opremo po celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ TAKOJ NA VOLJO: • Več kot 10.000 tekočih metrov regalov, ki so takoj na voljo • 20.000 m² skladiščnih in jeklenih podestov, takoj na voljo • Vsak teden 30–50 tovornih prikolic z blagom za največjo izbiro 📦 NAŠA PONUDBA (UGODNO NAKUPOVANJE V SPLETU): Ne glede na to, ali iščete paletni regal, regal za težke obremenitve, visoke regale, regal s policami, regale za pnevmatike ali regale za IBC-kontejnerje – dostavljamo in montiramo po vsej Evropi s svojo lastno ekipo! Vključno z načrtovanjem v CAD-programu, transportom, razstavljanjem in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ KONKURSNIH POSTOPKOV: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regal za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali s konzolnimi rokami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠA DRUGA DEJAVNOST: SPLETNE AUKCIJE IN IZKORIŠČANJE Ob razstavljanju in čiščenju ponujamo resnično celovito storitev: 1. Nakup po fiksni ceni: nakup trgovskega blaga, opreme in celotnih skladiščnih zalog, vključno s popolnim čiščenjem. 2. Aukcija na podlagi provizije: izvajanje dražb v našem imenu. Naša celovita storitev, ki jo izvajajo naši zaposleni: katalogizacija, priprava pisarne, ogled, izročitev blaga, logistika, demontaža in popolno čiščenje. Ne glede na to, ali ste se za nas zanimali zaradi regalov za težke obremenitve ali iščete pocinkane regale za težke obremenitve / regalni sistem za težke obremenitve – zagotavljamo najboljše pogoje. Kontaktirajte nas za neobvezujočo ponudbo!

Stanje: dober (rabljeno), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking rows: 01 pc. Length per racking row: 9,845 mm Number of bays per racking row: 05 pcs. Number of levels plus ground level: 02 pcs. Technical data for capacity: Pallet positions per bay: 06 pcs. Number of pallet positions per row: 30 pcs. Lhodpfovzam Isx Ab Hjk Total number of pallet positions: 30 pcs. Included in delivery: 06x Pallet rack uprights, used Material finish: Sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. horizontal and diagonal bracing, footplates Uprights pre-assembled (bolted truss) 2,000 mm high 1,100 mm deep 20x Pallet rack beams, new Material color: RAL 2001 orange Beam type: TB-S 100 Box profile: 100 x 50 mm Clear span: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 40x Integrated safety pins, new For securing beams against unintended lifting 24x Wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x Shims, used Design: fully galvanized For leveling uprights installed on uneven floors 01x Load sign With specifications for bay load and shelf load, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Delivery or shipment of this item is subject to additional costs, which can be requested from us separately depending on destination or scope of delivery.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, skupna masa: 500 kg, skupna dolžina: 2.000 mm, skupna širina: 1.600 mm, skupna višina: 2.200 mm, Nosilnost: 2.200 kg Premer mize: 1.525 mm Širina pasu: maks. 150 mm Debelina pasu: maks. 1,27 mm Višina sklada: maks. 760 mm Ledpezvqzzofx Ab Hehk Število vrtljajev: maks. 10 vrt/min, brezstopenjsko nastavljivo Izvedba: o Okvir v robustni varjeni konstrukciji o Upravljanje z zanko prek ročice z valjem o Hitrost je možno predhodno nastaviti na zaslonu o Desni/levi smer vrtenja o Fiksacija za notranji premer

Stanje: novo, Leto izdelave: 2025, Sheet Metal Decoiler Cantilever 500mm - Load capacity: 1,500 kg - Inner Ø: 480–530 mm Lodpfx Absfvbxqe Hohk - Decoiler mandrel with 4 tensioning arms, ball bearing-mounted, with disc brake - Maximum coil width: 500 mm

Stanje: dober (rabljeno), Leto izdelave: 2019, Schulte Lagertechnik, paletni regal, osnovni modul Proizvajalec: Schulte Lagertechnik Vrsta regala: Osnovni regal Tip nosilca: S610-M18 Skupna dolžina: 2700 mm Višina regala: 4500 mm Globina regala: 1100 mm Lhodpfx Aezrlkveb Hok Razdalja med nosilci: 2700 mm Tip nosilca: LNS-Duo 110 x 50 x 2700 mm Število ravni za shranjevanje: 4 (vključno z ravjo za talno shranjevanje) Število modulov: 3 Maks. obremenitev na nosilec: 2580 kg Maks. obremenitev na modul: 8200 kg Število paletnih mest: 12 Obseg dobave: 02 x Nosilec paletnega regala Schulte, 4500 x 1100 mm, modra barva 06 x Prečna nosilka paletnega regala Schulte, 2700 x 110 x 50 mm, 2580 kg, oranžna barva, vključno z varovalnimi zatiči Vaš partner za varno skladiščno logistiko: montaža, demontaža in pregled regala Učinkovito skladišče je temelj vašega uspeha. Zagotavljamo, da so vaša regalna sistema pravilno nameščena in izpolnjujejo vse varnostne standarde. Kot strokovnjaki za skladiščno tehnologijo vam ponujamo vse na enem mestu: Montaža in demontaža Ne glede na to, ali gre za novo namestitev, preureditev ali demontažo skladišča, prevzamemo strokovno montažo in demontažo vaših sistemov: - Paletni regali (za težke in standardne obremenitve) - Regali s policami za majhne dele in arhive - Nadstropja za skladiščenje za optimalno izkoriščenost prostora Pregled in inšpekcija regala po standardu DIN EN 15635 Varnost je zakonska obveznost. Izvajamo letni strokovni pregled (v skladu s pravilom DGUV 108-007): - Pregled na deformacije in poškodbe. - Kontrola varovalnih zatičev in ploščic z oznako obremenitve. - Izdelava pravno veljavnega zapisnika o pregledu, vključno s ploščico za označitev pregleda. „Vse na enem mestu: z veseljem vam ponujamo ustrezno bančno financiranje za vaš projekt.“ komplett-konzept.leasingo.de Druge artikle – nove in rabljene – najdete v naši trgovini! Mednarodni stroški dostave na zahtevo!

Leto izdelave: 2026, stanje: skoraj kot novo (rabljeno), Nosilec za vreče (big bag). Lsdpjztzhaefx Ab Hohk

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 120 mm vakuumski ekstruder za gumo s hladnim dodajanjem (20D), primeren za proizvodnjo gume (EPDM, SBR, NBR). Motor Siemens, 0–50 obr/min. Skupna moč 155 kW. Ljdexnpx Nepfx Ab Hohk

Stanje: dober (rabljeno), Technical Data for Pallet Racking Upright: Racking system: Mecalux Scope of delivery includes: 01x Pallet racking upright, used Material color: blue Frame profile: 80 x 69 x 2.00 mm Including horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted lattice structure) 6,000 mm high 1,000 mm deep Note: Some uprights have been extended at the factory for heights above 5,000 mm. Lhjdpjtpn T Tofx Ab Hsk Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping is required, additional costs will apply. These costs can be quoted on request depending on delivery location and scope.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Hongming HM-950, stroj za neprekinjeno valjanje in sploščevanje, primeren za proizvodnjo trdih platnic, platnic za knjige, map, prezentacijskih materialov, trdnih škatel in drugih izdelkov iz lepljenega kartona ali papirja. Stroj neprekinjeno dovaja material s transportnim trakom skozi velik pritiskovalni valj. To zagotavlja enakomerno stiskanje, izboljša oprijem med lepljenimi plastmi ter pomaga odstraniti ujeto zračno mehurčke in nepravilnosti. Pritisk in delovno višino je mogoče ročno nastaviti na obeh straneh stroja. Tehnične specifikacije: * Proizvajalec: Hongming * Model: HM-950 * Vrsta stroja: Stroj za valjanje in sploščevanje * Leto proizvodnje: junij 2022 * Delovna širina: približno 950 mm * Serijska številka: J01010089-0026 * Napetost: 380 V Lodpfx Aezq Tz Teb Hshk * Frekvenca: 50 Hz * Tok: 3,4 A * Moč motorja: 0,75 kW * Napajanje: trifazno * Označeno s CE Primerno za: * Proizvodnjo trdih platnic * Vezavo knjig in proizvodnjo platnic za knjige * Komponente za trdne in luksuzne škatle * Karton z lepljeno oblogo * Mape in prezentacijske platnice * Preoblikovanje kartona in papirja * Stiskanje in glajenje lepljenih materialov Stanje in oprema: Stroj je v dobrem, čistem stanju in je videti popoln. Opremljen je z neprekinjenim transportnim trakom in velikim, pokritim pritiskovalnim valjem. Priložen je originalni angleški uporabniški priročnik. Ogled je možen po predhodnem dogovoru.

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Ljdpfx Aey E Schjb Hshk Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Stanje: dober (rabljeno), Nosilec matrice, orodje za izmetavanje, orodje za prebijanje, prebijalnik, matrica za prebijanje, prebijalni stempel, prebijalni udarec, oblika za podolgovato luknjo, komplet prebijalnega stemplja in matrice za podolgovato luknjo -Prebijalni stempel: komplet prebijalnega stemplja in matrice, oblika za podolgovato luknjo -Velikost: 18,0 x 40,0 mm -Matrica: 18,7 x 40,7 mm -Mere za transport: Ø 90 x 80 mm -Teža: 2,1 kg Lhedpfxjzr Exge Ab Hjk