Mütek Mhz 600 nakup rabljenega (11.792)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Nedpfjx Af Rdex Agxjcr The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Ncodpfofci D Ajx Agxer Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced torque loading) - Minimal cutting gap between rotor and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Input material should be max. approx. 500 x 500 mm (height less critical) Hydraulically operated pusher Screen perforation as desired (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options (at extra charge): Nsdpfx Agsd H R Sxoxocr - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net - Inclined conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder) - Alternatively, manual start/stop on the conveyor belt + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contamination such as sand, stones, etc. result in increased wear. We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability. --- Optionally, larger machines are available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Input material should be max. approx. 720 x 700 mm (height less critical) From €39,995 net *Options upon request Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Input material should be max. approx. 900 x 700 mm (height less critical) From €49,975 net *Options upon request Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Input material should be max. approx. 1,200 x 700 mm (height less critical) From €79,975 net *Options upon request

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) Ncodpfx Agsdubpusxjr *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: rabljeno, 🧰 Lastnosti izdelka • Stanje: Rabljeno blago, glejte slike • Barva: modra, rdeča, rumena • Zunanje mere brez cevi: 145 × 145 × 16 cm • Notranje mere: 128 × 128 cm • Višina z vključenimi cevmi: cca 140 cm in 160 cm • Dolžina cevi: cca 130 cm in 150 cm • Premer cevi: 35 mm • Nosilnost: 500 kg • Možnost zlaganja: Da 💰 Cena € 39,- neto brez DDV • Količinski popust: na zahtevo • Stroški dostave: po vsej Evropi na zahtevo • Dobavni rok: takoj dobavljivo Ncedpfewz I Tnjx Agxer • Ogled in prevzem: možen kadarkoli po dogovoru Vedno na zalogi več kot 5000 tekočih metrov paletnih regalov različnih proizvajalcev (Pridržujemo si pravico do sprememb tehničnih podatkov, informacij in cen ter vmesne prodaje! Glejte naše splošne pogoje, vse cene brez DDV, iz skladišča.)

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Ncedpfx Ajchuvrogxsr Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, *Vsi naši izdelki so izdelani skrbno in imajo 1-letno garancijo! *Namestitev in usposabljanje operaterja BREZPLAČNO Ncedpfx Agsyz Ihxoxor • Model: FABO HY-600 • Tip: Dvojna spiralna (helix) navijalna pralna naprava • Zmogljivost: 60 ton na uro • Dimenzije: 1400 x 6650 x 1800 mm • Velikost vijačnice: Ø 600 x 6000 mm • Hitrost: 22 obr/min • Motor: 2 x 5,5 kW težka izvedba, Gamak • Poraba vode: 55-205 m³ • Vključuje šasijo, motor in varnostne zaščite. ZA VEČ INFORMACIJ NAS PROSIMO KONTAKTIRAJTE!

Stanje: novo, Leto izdelave: 2026, Delivery time: Approx. 4-5 months Your advantages: + Extremely large cutting chamber opening: 1300 x 1200 mm + Special rotor suitable for both hard and soft wood + Energy efficient and powerful with 37 kW start-up output Technical specifications: Color: grey / blue Feed opening on top (mm): 1,300 x 1,200 Hopper volume (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40; selectable Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (L x W x H) Nsdpogbkkrsfx Agxocr Approx. weight (kg): 3,500 Options available at extra cost: - Second row of knives, for up to 30% higher throughput - High-speed hydraulics, for increased throughput - Conveyor belt discharge preparation - Conveyor belt - Overband magnet HAWK-EYE *To shred veneer or paper (materials thinner than 3 mm) we recommend a segmented floor. Special option available at extra cost. --- Slider extension option *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the cutting chamber opening on the top is 1300 x 1700 mm; surcharge +14,975) *significantly longer production time required. *Larger machines available upon request. --- Raw material requirements: - Moisture content (oven-dry) must be below 20% - The feed material must be free of metals and mineral impurities. Otherwise, tool damage and/or increased wear may occur.

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Nedpfxov Rpxlo Agxocr Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), PlateExakt 600 – Klischee-Montagegerät / Stanzzylinder  Baujahr: 1992  Montagevorrichtung  Klischee-Montagegerät, das speziell dafür konzipiert ist, das Klischee oder die Stanzplatte sicher, präzise und schnell auf den Druck- bzw. Stanzzylinder zu montieren. Das Gerät verfügt über zwei hochauflösende USB-Kameras, die linear auf einer Präzisionsführung verfahren werden können. Die Synchronisation erfolgt mittig, zudem sind die Kameras mittels Handrad individuell für unterschiedliche Druckbreiten einstellbar.  Max. Durchmesser: 227 mm  Min. Durchmesser: 60 mm  Breite: 620 mm Nodpfx Asl Ax Uwsgxocr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Nedpfx Agjgmh H Texscr Screen perforation as desired (15 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Ncodpfx Ajv Sqrpogxjr Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: dober (rabljeno), Used, good condition. Technically inspected second-hand machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (such as toys and chewing material for pigs), animal feed, alfalfa, or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (depending on material) (e.g., sawdust with a bulk density of 250 kg/m³) Accurate statements on throughput are only possible after testing with your material. Actual output may vary significantly depending on the bulk density of the starting material. Customs tariff number: 84793010 Briquette Ø 65 mm Including 2 m press channel Main motor power: 37 kW Feed screw geared motor: 2.2 kW Compression screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with hour counter in the switch cabinet Machine has CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3800 kg Ncedpfxsfmqq Eo Agxor Optional extras at additional cost: Temperature control unit for press tools To maintain temperature for optimum briquette quality. Includes temperature controller for pump, cooling unit, fan, pressure switch. Pre-wired, ready to connect – mandatory for operation Including corresponding control system + €7,850 net Guillotine or tablet breaker For cutting briquettes + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. Conveyor line/cooling section (nominal: 4x2m) Each 2 meters €990 net Installation/commissioning (estimated 2-3 days onsite) Billed based on effort and separate calculation. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and travel kilometer: €0.98/km Travel and accommodation charged to client according to receipts or via flat rate. Test run with customer-specific material: (by arrangement, up to a maximum of 750 kg) – €1,970 net flat rate Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and maximum of 15% - Chip length maximum 18 mm - Installation temperature: heated room at minimum +5°C - Feed material must be free from metals and mineral contamination. Damage to the press tools and/or increased wear may result

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material Nodpfod N Dnhsx Agxscr - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit *Available upon request New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully produced and in stock; only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front sleeve: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height: 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option - press plier cooling: no Option - hydraulic oil cooling: yes Option - level monitoring: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content: Nsdpfxjd Su Hxo Agxscr

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Ncodpfx Ageffh Atjxer Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Pictures to follow Ncsdpfx Agsrb D Njxsr Mobile Jet 160 Connection: 160 mm Fan: 2.2 kW Airflow: 1,850 m³/h / 400 V

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet Ncedjd Dgw Uspfx Agxjr - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, multiple edges (reversible), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation as required (15 - 40mm) Extraction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double blade row + €995 net (28 instead of 14) - Extra charge for 4-sided segmented floor + €3,750 net (prevents pusher from jamming. Recommended for shredding plastics, paper, veneers with thickness less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) Ncodpfx Aogmfa Aegxsr Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc. leads to increased wear. We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Leto izdelave: 2024, stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). Ncodpfx Ajff Sbiegxor The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW Demonstration machine available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts and for size reduction of wood chips. Further details available after testing with your material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suited for numerous size reduction applications. For example, defective parts and sprues from injection molding machines that need to be recycled. At the blow molding machine, in addition to defective parts, flash and start-up waste from hoses are processed. Materials such as blow-molded PET bottles, PE/PP bottles, canisters or buckets, and pipes can be processed. The material is fed from above via a hopper into the granulation chamber. The rotor inside is equipped with cutting blades. Material is shredded between the rotating blades and the stationary knives mounted in the chamber housing until it falls through the screen located below the rotor as defined regrind. *Option: The regrind is usually conveyed pneumatically into big bags, silos, or other containers. The price applies only to the granulating plant as shown in image 1. Fan, cyclone, and filter available as options. --- Technical data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *extremely dependent on screen size and material Application example: PE 1000 plastic size reduction Feed material: approx. 40 mm chip length Secondary grinding down to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) For G 30 wood chip secondary processing, much higher throughputs are possible – up to a maximum of 400 kg/h with a 10 mm screen (metered feeding e.g., via conveyor or auger). Further details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor blades, each 225 mm 4 stationary blades, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Extraction connection: 100 mm Screens: 6, 8, and 15 mm – further screen options available Price per screen: €390 Spare blade set: €679 Suitable for: - Plastic waste of all types Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, scrap from injection molding, small bottles, cables, small pipes, profiles, etc. --- Larger systems available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Feed opening: 620 x 400 mm Special net price: from €24,995 net *optionally with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Feed opening: 620 x 500 mm Special net price: from €29,795 net *optionally with matching extraction/conveying system --- For configuring the machine, the following information is required: - Length x width x height of the feed material? - Screen size, final particle size required (mm)? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos are also helpful Ncsdpfx Agod N Dn Doxjr

Stanje: zelo dobro (rabljeno), The scope of delivery includes: 02x Workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted truss) 04x Workbench beams, used Material color: RAL 7035 light grey Nsdpfx Aei Ewqkjgxjcr Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Clear span: 2,400 mm 08x Safety pins, new Version: completely galvanized 01x Particle board, 2nd choice, used Particle board thickness: 38 mm Width: 2,580 mm Depth: 600 mm Surface: optionally coated (possibly two-piece) 01x Particle board, 2nd choice, used Particle board thickness: 38 mm Width: 2,380 mm Depth: 600 mm Surface: optionally coated (possibly two-piece) 16x Self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm Images are for illustration of the material. Material color may vary. Particle boards may be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - Production time is typically approx. 5 working days.

Stanje: dober (rabljeno), Technical data for the pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Nsdpoww Im Hjfx Agxjcr Included in the scope of delivery: 01x pallet pull-out, used for rack depth: 800 mm Material color: blue Total depth: approx. 810 mm Total width: approx. 1,295 mm Height: approx. 265 mm Extension: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If you wish to have the item transported to you or shipped, this will incur additional costs, which can be provided separately depending on delivery location and scope of delivery.

Leto izdelave: 2018, stanje: novo, Your contacts at our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank Ncsdpod Rxyrsfx Agxjr We are offering you a new post protector from the manufacturer Mecalux for purchase. The post protector is suitable for frame profile widths up to max. 120 mm. The scope of delivery includes: 01x Post protector, new Material color: orange For upright profile width: approx. 120 mm Total height: approx. 600 mm Total width: approx. 132 mm Inner width: approx. 126 mm Total depth: approx. 70 mm Deflector: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (center-to-center): approx. 400 mm Weight per piece: approx. 4.298 kg 04x Hexagon bolt: M8 x 25 mm 04x Lock nut: M8 04x Washer: M8 Our range of services at a glance: (Prices on request) Assembly and installation Our general assembly terms and conditions apply Racking inspection Rack inspection in accordance with DIN EN 15635 carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own vehicle fleet (without unloading)

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering here a used column protection guard by the manufacturer Gemac for sale. The column protection is suitable for a frame profile width of max. 90 mm. The scope of delivery includes: Ncedpfx Agofdqkaexer 01x Column protection guard, used Material color: cream white Design: V For upright profile width: approx. 90 mm Total height: approx. 600 mm Total width: approx. 113 mm Deflector height: approx. 60 mm Material thickness: approx. 4 mm Hole Ø: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 kg 02x Mounting plates, used Material color: cream white Dimensions: 130 x 91 mm (W x D) Material thickness: approx. 7 mm 04x Hexagon bolts: M10 x 35 mm 04x Lock nuts: M10 04x Washers: M10 Overview of our services: (Prices on request) Assembly and installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635 carried out in compliance with the requirements of BGR 234 visual inspection for all types of racking systems Delivery using our own fleet (unloading not included)