Gannomat Neprekinjeno Stiskanje Trupov nakup rabljenega (810)

Stanje: novo, Leto izdelave: 2026, Machine d’insertion de tourillons avec pistolet pour collage et insertion simultanés des tourillons. Pour le traitement professionnel et rationnel des tourillons dans l’industrie du meuble et de la fabrication de cadres. Présentation succincte : • Dépassement d’insertion des tourillons constant • Quantité de colle toujours constante et précise • Aucun nettoyage ultérieur des pièces n’est nécessaire grâce au dosage correct de la colle • Nettoyage très simple du système de colle grâce à EasyClean, le programme de nettoyage automatique • Éjection automatique des tourillons de diamètre ou longueur incorrects grâce à Auto-DL-Selekt Nledpfsdx Abusx Ah Ueb • Les tourillons ne sont pas insérés jusqu’au fond du perçage, le dépassement d’insertion est déterminé indépendamment de la profondeur du trou • Pistolet d’insertion avec colle et tourillon ultra-léger, confortable et sans recul • Gain de temps considérable par rapport à la méthode traditionnelle avec flacon de colle et marteau

Stanje: novo, Leto izdelave: 2026, NC krmiljen vrstni vrtalni stroj za visoko proizvodno kapaciteto z 1 ali 2 vrtalnima tramovoma s po 76 vrtalnimi vreteni. Kratek opis: • Vrtanje vrstnih lukenj v SISTEMU 32 mm • 76 ali 152 (2 x 76) vrtin v enem vrtalnem ciklu • Prilagoditev globine vrtanja za različne globine • Masivni precizni vrtalni menjalnik GANNOMAT Nljdpsdxz S Hjfx Ah Ujb • Vrstni vrtalni stroj za visoko kapaciteto

Stanje: novo, Leto izdelave: 2026, Za profesionalno in natančno doziranje količine lepila v izvrtinah za moznike in utorih zadnjih sten. Kratek opis: • Vedno enaka in pravilna količina lepila • Ni potrebno naknadno čiščenje obdelovancev zaradi preveč lepila • Enostavno in minimalno čiščenje lepilnega sistema (1x tedensko, prek programa za izpiranje) • Prihranek pri stroških lepila • Ergonomska in lahka lepilna pištola v primerjavi z lepilnimi steklenicami Nledsdxz Tpepfx Ah Ujb • Hitrejše in natančnejše delo v primerjavi z lepilnimi steklenicami

Stanje: novo, Leto izdelave: 2026, Univerzalni masivni lesni vrtalni stroj s brezstopenjsko vrtalno enoto za univerzalno uporabo, na primer pri izdelavi stopnic, vhodnih vrat, oken, zimskih vrtov ter za izdelavo dolgih lukenj. Kratek opis: • Univerzalno področje uporabe: izdelava stopnic, okvirjev, vhodnih vrat, oken, zimskih vrtov ter za izdelavo dolgih lukenj, ... • Brezstopenjsko vrtalna enota z nagibom: 65°- 0 - 65° • Globina vrtanja do 200 mm (večje globine po izbiri) • Nastavitev višine za 2 nivoja, pnevmatska, 0-100 mm • Vrtanje na dveh nivojih s pnevmatskim dvigom in spustom vrtalnega motorja pri enkratni fiksaciji obdelovanca • Pnevmatske vpenjalke za obdelovance • Večvretenaste vrtalne glave (opcija) • Pnevmatski pomik vrtanja (opcija) Nedpfjdx R E Tsx Ah Uelb • Mobilno preko podvozja (opcija) ali z ročnim paletnim vozičkom

Stanje: novo, Leto izdelave: 2026, Gannomat ProTec - CNC Throughfeed Machine for Drilling, Grooving, and Milling Operations Brief Overview: • Compact footprint, less than 3.3 m² • Handles large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpiece dimensions • Gentle workpiece handling through air nozzles • Precision ensured by dual laser measurement and workpiece alignment • Fast processing with 21/23 drilling spindles • 21/23 drilling spindles allow for zero setup times • Robust grooving unit for saw blade widths up to 8.3 mm • Powerful milling unit 5.5 kW (S1), optional • Automatic tool changer for milling unit, optional CNC-controlled DRILLING, GROOVING, and MILLING on less than 3.3 m² with high processing precision and zero setup time – this is what the GANNOMAT ProTec stands for. TECHNOLOGY: The robust processing unit is equipped with 13 vertical drilling spindles, 8 double horizontal drilling spindles (6Y & 2X), 1 grooving saw on the Y-axis, and 1 milling unit. This configuration allows all commonly used drills/tools to be ready in a single setup and called up as required. This CNC machining center operates from below and can work in both throughfeed and return-to-operator modes. Steel support tables with air nozzles provide a reference for horizontal drilling, and, combined with robust workpiece clamps and an additional 4th axis at the drilling head, allow for highly precise drilling. A contactless laser sensor detects actual workpiece edges (top and bottom), enabling automatic correction and adjustment of the drilling program. APPLICATION AREA: ProTec offers high-end technology for both operation and application and was developed as an entry-level CNC model for small and medium-sized workshops and, alternatively, as a secondary machine to standard machining centers to prevent production bottlenecks. FIELDS OF APPLICATION: Nlodpfxjbiplrs Ah Usb The GANNOMAT ProTec stands out for its universal application range and high customer benefit due to its excellent cost-efficiency. It is specifically designed for maximum flexibility from batch size 1 to series production, as well as for high precision with zero setup time. The GANNOMAT ProTec is designed for complete machining of cabinet side panels, cabinet bottoms, rails, back panels, furniture doors, drawer parts, drawer fronts, countertops, frame parts, tables, sliding doors, templates, and more. Examples of operations include dowel holes, row holes, mounting plate holes, connector and drawer runner bores, fittings, cabinet hanger bores, handle bores, lock bores, etc. The grooving unit enables machining of back panel grooves (also as rebates) or grooves in drawer fronts. The milling unit can perform a variety of milling tasks such as (excerpt): pockets of all kinds, tambour tracks, spot and cable pass-throughs, handle strips, plinth cutouts, recesses for cup handles and furniture locks, lock mortises, ventilation openings in doors, kitchen worktop joints as well as partial routings in, for example, kitchen worktops, furniture frame doors, and much more. Another possible application of the ProTec is the routing of standard milling contours traditionally produced with templates and manual routers. Materials such as chipboard, solid wood, multi-layer boards, lightweight panels, etc., can be efficiently processed with the ProTec.

Stanje: novo, Leto izdelave: 2026, Prehodna vrtalna stroj z obojestranskim vrtanjem in mozniki v sistemu 32 mm preko večvretenastih vrtalnih glav in nastavljivih postaj za vstavljanje moznic. Kratek opis: • Prehodni vrtalni in moznični avtomat s transportnim sistemom za vračanje obdelovancev • Majhne prostorske zahteve za prehodni vrtalni stroj • Opcijski, dodatni vertikalni vrtalni agregati • Zaprt lepilni sistem Nlsdpfxsdx Axkj Ah Ujb • Prehodni avtomat za vrtanje za visoko kapaciteto

Stanje: novo, Leto izdelave: 2026, Samodejni stroj za vrtanje in vstavljanje okovja z zalogovnikom za avtomatsko obdelavo spojniki in montažnih plošč. Naši avtomatski stroji za vrtanje in montažo odlikuje robustnost, dolga življenjska doba in enostavna uporaba. Kratek opis: • Stroj za vrtanje in vtiskovanje spojniki za visoko kapaciteto Nlodpfx Ahjdx A Urj Usb • Masivni in robustni vrtalni agregati • Tiskalna matrica iz jekla za dolgo življenjsko dobo • Vrtanje masivnega lesa s standardnim 1,5 kW motorjem • Varnostni nadzor z detektorjem kovin (opcijsko)

Stanje: novo, Leto izdelave: 2025, Concept Easy je idealen pripomoček za montažo mozniških spojev pri stiskanju korpusa, kot tudi pri izdelavi predalov. Kratka predstavitev: Nsdpfodx Daajx Ah Uslb • Majhna potrebna površina, manj kot 1,8 m2 • Potenciometer za brezstopenjsko nastavitev pritisne sile • Tlačna sila min. 300 daN (kg) • Tlačna sila max. 2200 daN (kg) • 3 pritisne in nastavitvene hitrosti 5 / 10 / 25 mm/s (z natančnim pozicioniranjem / počasnim načinom) • Prosto nastavljiv prednastavljeni čas pritiska z avtomatskim odpiranjem

Stanje: novo, Leto izdelave: 2026, Vrtanje, lepljenje in vstavljanje moznikov v okenske profile za učinkovito in profesionalno izdelavo okenskih spojev z moznično tehniko. Kratek opis: Nledpfxodx R A Uo Ah Ujb • Univerzalni CNC krmiljeni stroj za vrtanje in vstavljanje moznikov za okenske in vratne elemente • Nadzor brizganja lepila preko GIC • Zaprt sistem za lepilo • Izbirna dodatna horizontalna vrtalna vretena • Razbremeni CNC obdelovalne centre

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Kratek opis: • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij Njdpfodx R Dtox Ah Uslb

Stanje: novo, Leto izdelave: 2026, Stroj za vrtanje vogalnih ležajev in ročajev za natančno in učinkovito vrtanje okenskih elementov. Kratek opis: • Brez časov preurejanja med vrtanjem vogalnih ležajev in ročajev • Prednosti vrtanja od spodaj • Komplet dodatne opreme za vrtanje vogalnih ležajev • Vrtalni vzorec po proizvajalcu (npr. G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... in drugi proizvajalci) • Komplet dodatkov za vrtanje ročajev • Masivni precizni vrtalni prenosnik GANNOMAT Nedpfx Aodx R Hzoh Uolb

Stanje: novo, Leto izdelave: 2026, Kotna ležajna in olivna vrtalni stroj za natančno in racionalno vrtanje okenskih elementov. Kratek opis: Nlodsdx R Hcjpfx Ah Ueb • Pribor za kotne ležaje • Vrtalni vzorec po proizvajalcu (npr. G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... in drugi proizvajalci) • Pribor za olivne izvrtine • Masivni precizni vrtalni menjalnik GANNOMAT

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 1088.968, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 55 h, skupna širina: 700 mm, skupna dolžina: 900 mm, skupna višina: 650 mm, skupna masa: 70 kg, število vreten: 5, Ponujamo ta rabljeni stroj za vrtanje okovja Gannomat Modell204, letnik 1999. Proizvajalec: Gannomat Model: Modell204 Letnik: 1999 Stanje: rabljeno ID kategorije: 659 ID tipa: 2533 Tip stroja: stroj za vrtanje okovja Za vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite. Nljdpfx Ahjyak Hyj Uob

Stanje: rabljeno, Leto izdelave: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving: Detailed technical data available in the data sheet for ProTec type 0571. Processing unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y4th drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1,000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in throughfeed mode, max. 5,600 mm programmable in the software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, 5.5 kW (S1) motor, 1000-20,000 rpm with frequency converter, clockwise and counterclockwise, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connected load: 12 kVA Rated current: 17.5 A Fuse: 32 A Voltage: 400 V, 50 Hz, 3-phase (without transformer) Power network: TN or TT Pneumatic connection: 7 bar (102 psi) On machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory side For the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply pipe, hose inner diameter min. 12 mm Compressed air requirement, continuous air consumption: approx. 230 L/min (about 3.8 L/s) (compressed air) Extraction connection: 3x extraction nozzles, dia. 80 mm Extraction speed: 30 m/sec - measured at extraction nozzle Extraction requirement: min. approx. 2,500 m3/h Machine weight: approx. 1,650 kg (with options!) Machine footprint: In general, a ProTec can be fixed to the floor. Concrete flooring (or foundation) is required (at least under the 4 machine corners/feet). Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm - Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamella curtain - Requirement for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec shank ø 10 mm with clamping surface (JSO): 1 HW pyramid point drill bit 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill bit 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill bit 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill bit 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill bit 8x70mm (NL 35mm), LH #30540-5-08035-L Nsdpfx Ajw Tfzfoh Uelb 2 HW dowel drill bit 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW grooving cutter ø 125/30 mm, groove width (SB) 4.0 mm, Z=12, LH, Leitz - Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs for collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3.00 pcs Carbide insert shank cutter Z1+1, 1.00 pcs HW with insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW-insert Z1, 1.00 pcs with insert drill tip, D ø 10 mm, d ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative grooving cutter HW-insert Z1, 1.00 pcs

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Nodpfxow Sgnke Ah Uslb Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: novo, Leto izdelave: 2025, GANNOMAT “MASTER 325” FRAME DOWEL AND MORTISE DRILLING MACHINE ESPECIALLY DESIGNED FOR STAIRCASE CONSTRUCTION Complete in standard specification according to price list 01/19/D, including: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor 1400/2800 rpm, 1.5 kW - Line laser with mount - Drilling unit, infinitely rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum drilling depth: 200 mm - Precision index rail with 12 mm pitch and center locking, and cross adjustment 320 mm - Complete stop system including: 1 center stop and 1 stop for extra-wide frames 1 stop bar, approx. 850 mm long (can be reversed from left to right) 2 folding stops - Height-adjustable mortising unit with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction hood, dust-tested, Ø 80 mm Double mitre stop, adjustable 0°-60° Pneumatic clamping of X-axis with on/off switch at the indexing lever Pair of workpiece support arms, swiveling (left and right) Clamping column can be repositioned to the front Chassis with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Spindle drill bit Ø 25 mm, made of chrome steel, with centering point Nsdpfexdttpex Ah Uolb Available: short notice

Stanje: novo, Leto izdelave: 2025, CNC-controlled boring, gluing, and dowel inserting machine fully equipped in standard configuration with: - Support with linear guide, consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool rotation speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blowing, gluing, and dowel insertion station for dowels ø 8 mm, dowel length 25-50 mm - Fully automatic electronic central lubrication system - X-axis CNC controlled, working length 700 mm, maximum traversing speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position over support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter, drilling depth from 0-35 mm (with drill length GL 70 mm) automatically set with projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with a viscosity of 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for remaining glue level in the glue tank - 1 left side stop, 1 right side stop (both removable) - 2 start buttons for individual operation with 1-2 workpieces - 2 pneumatic angular clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm Nlsdpjw Sgm Hefx Ah Ueb - 1 extraction funnel, connection ø 80 mm - 1 TCT control with: Built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via user-friendly menu software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID measurement, automatic workpiece mirroring and process optimization, 2 work areas assignable with different programs, graphic workpiece representation, parametric programming, zero-point displacement, programmable work lists, plain-text error diagnostics - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle Art.no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before starting the drilling/gluing/dowel inserting work program. E.C.S. for 1 glue nozzle Art.no. 0471-Z010 - 1 single-spindle vertical drilling unit, top drilling, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter Adjustable from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation e.g. for Häfele Minifix) Art.no. 0471-0830 - 4 additional vertical angular clamping cylinders 10° with bracket, Art.no. 0470-0850 Available: at short notice

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND MORTISE BORING MACHINE Completely in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3–26 mm. Nledpfxjxdttis Ah Uob Including collets Ø 10 / 13 / 16 / 20 mm - Motor 1.5 kW, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm increments, featuring: - Central detent and transverse adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system, consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar, approx. 850 mm long (can be repositioned from left to right) 2 flip stops - Lowerable mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, diameter 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swiveling (left and right) Drilling head mount 3-spindle drilling head, 32 mm pitch (can be rotated 90°) Undercarriage with 4 wheels for easy movement of the machine Availability: Short term – immediately –

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Nodpfx Asiidm Nsh Uolb Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 2024, New demonstration machine! List price: €32,665 – Complete in standard configuration with: Sturdy, torsion-free steel frame in welded and bolted construction – TOP lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements – Lamella pressure beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints – Counterpressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support panels – Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam – Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir – Pressing is performed electromechanically by two separate worm gear motors (2 x 0.75 kW) – Pressing force of the pressure beams is infinitely adjustable via two potentiometers and regulated by frequency converters, making the pressure regulation absolutely wear-free – Pressing force for the horizontal beam: min. 500 daN (kg) up to max. 2200 daN (kg), stepless – Pressing force for the vertical beam: min. 300 daN (kg) up to max. 2200 daN (kg), stepless – Pressing and adjustment speed of the beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second – Simple operation via 6 separate push-buttons, 8 movement sequences selectable via control unit – Freely adjustable pressing time preselection with automatic opening (0–30 min, switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm | Height min: 150 mm, max: 1400 mm | Depth: 700 mm – Weight: approx. 1800 kg net – Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Nledpeuf Hx Hsfx Ah Uob Additional features: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Pressing speeds: 5 / 10 / 25 mm/sec and rapid traverse: 50 mm/sec. Sensors can be deactivated for pressing custom parts. 1 set of machine feet (working height 500 mm). Location:

Stanje: rabljeno, Leto izdelave: 2017, Število vrtalnih vreten: 21 kos Razmak: 32 mm Njdsihghropfx Ah Uelb Vpenjanje svedra: vpenjalna površina stebla svedra: 10 mm Upravljanje: nožni pedal Orodja: da Smer vrtanja: od spodaj in čelno Zasuk: ročno Kot zasuka: samo 0° ali 90° Maks. višina prehoda: 80 mm Maks. širina prehoda: 750 mm Število vpenjalcev materiala: 3 kos Vrsta vpenjanja materiala: pnevmatsko Izvedba: stacionarno Sistem zaustavitev: samo za konstrukcijsko serijo Teža približno: 400 kg Moč motorja: 1,5 kW Premer odsesovalnega priključka: 120 mm Skladiščna lokacija: pri stranki

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Engines: 2 x 1.85 A, 50 Hz, 380 V, 2800 rpm Operating air pressure: 6 bar 30 spindles, holder Ø 10 mm Nledpfxov Nptme Ah Ujb Combined foot switch Emergency stop switch Main switch Manual height adjustment Manual lateral adjustment

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW air connection 6 bar fully automatic pneumatic control with foot pedal additional switch for "chip removal" program T-drilling head with 7+2 drilling spindles, 32 mm pitch drill shank diameter 10 mm swivable 90°, with locking mechanism Nlodpfx Ahsv Npw Ee Ueb undercarriage

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Power supply: 380V, 3.3A Motor power: 1.1 kW, 2800 rpm automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Dimensions: 1200 x 900 mm Weight: approx. 400 kg Includes: 1x row drilling setting gauge 1x side stop setting gauge 1x stop ruler 1500 mm 1x stop ruler 2000 mm Nledpfx Aheq Auwtj Usb

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Drilling and insertion machine for all types of furniture fittings; row drilling and group drilling machine in the 32 mm system. Power supply: 400V, 0.75kW Spindle speed: 2800 rpm Stop rule: 960 mm 2x swiveling stops For drills with 10 mm shank diameter Maximum workpiece thickness: 40 mm Nedpfxeumw Sbo Ah Uolb Includes: 1x 7-spindle drilling head for row drilling with 32 mm pitch, equipped with integrated positioning pins Manual feed Base frame included Available at extra cost: Olive (handle) drilling head: €450.00 Mepla drilling head with press-in die: €550.00 Hettich drilling head with press-in die: €550.00