Okvir & stopnišče & Mortisingmachine

Gannomat Master 325

Stanje: novo, Leto izdelave: 2025, GANNOMAT “MASTER 325” FRAME DOWEL AND MORTISE DRILLING MACHINE ESPECIALLY DESIGNED FOR STAIRCASE CONSTRUCTION Complete in standard specification according to price list 01/19/D, including: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor 1400/2800 rpm, 1.5 kW - Line laser with mount - Drilling unit, infinitely rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum drilling depth: 200 mm - Precision index rail with 12 mm pitch and center locking, and cross adjustment 320 mm - Complete stop system including: 1 center stop and 1 stop for extra-wide frames 1 stop bar, approx. 850 mm long (can be reversed from left to right) 2 folding stops - Height-adjustable mortising unit with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction hood, dust-tested, Ø 80 mm Double mitre stop, adjustable 0°-60° Dodpfx Ajxdttpja Howf Pneumatic clamping of X-axis with on/off switch at the indexing lever Pair of workpiece support arms, swiveling (left and right) Clamping column can be repositioned to the front Chassis with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Spindle drill bit Ø 25 mm, made of chrome steel, with centering point Available: short notice

Stanje: novo, moč: 6,77 kW (9,20 KM), Leto izdelave: 2024, SCHORR Track Dumper RR500DHKAH PRO – Discover the Advantages: - 9.2 HP four-stroke engine - Self-propelled & powerful tracked drive - Hydraulic scissor lift (discharge height 1.44 m) - 500 kg payload - Large, high-quality tipping skip with wide tipping angle - Foldable operator platform as standard - 6+2 gears SCHORR TRACK DUMPER DHKAH PRO WITH HYDRAULIC TIPPING, OPERATOR PLATFORM, AND SCISSOR LIFT The SCHORR RR500DHKAH track dumper features a hydraulic tipping drive and has a payload capacity of 500 kg as well as a powerful 9.2 HP single-cylinder 4-stroke petrol engine. The stand-out feature of the RR500DHKAH is the hydraulically controlled scissor lift function. This allows you to discharge materials at heights up to 1.44 m – ideal for trailers, containers, or other elevated surfaces. Thanks to its slim design (700 mm), the mini dumper can also navigate narrow paths and doorways, making it an extremely flexible transport solution. Djdpfjttg Upsx Aa Howf The robust tracked drive enables the mini dumper to easily overcome rough terrain, inclines, and curbs. The rubber tracks provide a secure footing in all work environments. Raising and lowering the skip/box is effortless, even under full load, thanks to the hydraulic tipping mechanism. With its sturdy skip made of thick steel and a straight outlet for quick and easy discharge, this dumper is a must-have for anyone needing to transport heavy loads. Tipping on mild inclines is no problem at all. The wide tipping angle ensures that even fully loaded skips are completely emptied without the need for manual assistance. This saves both time and effort, making the motorised wheelbarrow indispensable for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbr.): SCHORR Model code: RR500 Model: DHKAH Load capacity: 500 kg Tipping mechanism: Hydraulic (stepless) Drive type: Track Weight (unpackaged/packaged): 363 / 388 kg Drive Engine: Air-cooled 1-cylinder 4-stroke OHV engine Starter: Recoil starter Power: 9.2 HP Transmission: 6 forward gears / 2 reverse gears Speed Forward: max. 8 km/h Reverse: max. 5 km/h Fluids Fuel tank capacity: 6 L (unleaded petrol) Hydraulic oil capacity: 3 L (ISO VG 32) Transmission oil capacity: 1.5 L (SAE 80W-90) Engine oil capacity: 0.9 L (15W-40) Max. hydraulic oil flow rate: 9 L/min Dimensions Overall length, platform folded: 1900 mm Overall length, platform extended: 2100 mm Overall width (including tracks): 710 mm Overall height: 1050 mm Container dimensions (internal): 740 x 665 x 435 mm Container dimensions (external): 1060 x 710 x 520 mm Track width: 710 mm Loading volume (liquid): ~ 200 L Loading volume (heaped): up to 370 L (depending on material) Track chain dimensions: 180 x 60 x 38 mm Ground clearance: 120 mm Packing size: 1890 x 740 x 1220 mm Loading Height Side: 1030 mm Front: 810 mm Discharge height min./max.: 810 / 1440 mm We at SCHORR are happy to assist with any questions regarding our lift trucks. You can reach our knowledgeable team by phone or by email. We look forward to hearing from you and providing assistance during your purchasing decision.

Stanje: dober (rabljeno), Leto izdelave: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Specially designed for staircase construction, window manufacturing, and versatile use thanks to pneumatically adjustable working height. Angled doweling and baluster boreholes are easily achieved via the rotating drilling unit. - Dual-speed motor, switchable pole, 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor is started with a convenient handle switch - Equipped with Röhm 2-jaw chuck, 1 - 20 mm - Linear laser for precise workpiece positioning - Drilling unit rotatable 65 degrees to the left and right Dodpfxoxmatno Aa Hjwf - Pneumatic adjustment of working height allows doweling on two levels without repositioning - Desired drilling heights can be set for each drilling level using a digital counter; switching is performed pneumatically from the front - Lateral adjustment 340 mm, stepless or in 12 mm increments, with indexing rail - Pneumatic clamping possible at any position, operated from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps; 1 clamp column can be repositioned to the front - 2 swivel workpiece supports - Extraction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Assorted drill bits - Operating manual - CE marking - Machine was partially repainted due to paint splatters - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration at our warehouse—see "other offers from this provider."

Stanje: novo, Leto izdelave: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable Dwodpfx Aaji Hpk Uo Hof 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: zelo dobro (rabljeno), SCM S520 Thickness Planer Working width: 520 mm Working height: 250 mm Feed speed adjustable: 4 steps Cutterblock with traditional knives Dwedpfeitkx Eex Aa Hjf 4-knife cutterblock Power: 4 kW Weight: 670 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 350 kW Working output: 279 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 3 x 300 mm Furnace length: 1,200 mm Furnace width: 740 mm Furnace height: 1,040 mm Air delivery: 17,800 m³/h Warm air blower power consumption: 3 kW Flue gas fan power consumption: 600 W Dwodok Utrtepfx Aa Hef Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without warm air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Leto izdelave: 1998, Stanje: dober (rabljeno), I am selling a dowel drilling machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programming CNC-controlled Z-axis Working width: 1200 mm Maximum working height: 36 mm Dodpfxjd Exwgs Aa Howf Available for immediate sale

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), Window manufacturing machines WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Dwedpfx Asiix Uvea Hef Profiling and finish-milling machine UNIVAR 10, year 1997

Leto izdelave: 2022, Stanje: novo, No. 04320 Edge Sanding Machine VOLPATO LVO 150 T New machine, 100% made in ITALY Year of manufacture: 2022 Immediately available from stock Combined edge sanding machine with multiple working options. Independently motorized belt oscillation, mechanically adjustable up to a maximum stroke of 20 mm. The complete sanding unit can be tilted from vertical up to 45°, with continuous adjustment at any angle in between. In the standard configuration, it is designed as a single-station solid wood sanding machine. It can be quickly converted to precise veneer sanding with the veneer edge sanding attachment included in the delivery. Thanks to the single-station solution, the machine can also be installed in a space-saving way against a wall. The basic equipment includes a 5-piece sanding roller set (Ø 25-30-35-40-45-50 mm). By using sanding belts with different grits, you can achieve various surface finishes and degrees of material removal. Belt dimensions 2640 mm Sanding belt width 150 mm Work table 940x460 mm Sanding belt speed 15 m/s Belt drive motor 4 kW Dwedpfx Ajia N Nxja Hjf Oscillation motor 0.15 kW Driven roller diameter Ø 75 mm Additional work table 350 x 300 mm Sanding rollers Ø 25 – 30 – 35 – 40 – 45 – 50 Oscillation stroke 15 mm Dust hood diameter Ø 100 mm Incl. operating manual in English Incl. certificate of conformity with CE standards Other scope of delivery as shown Delivery conditions: ex stock Transport dimensions approx. 1650 x 1100 x 1350 mm (LxWxH) Weight approx. 250 kg Inspection on site possible by appointment Technical data, year of manufacture and scope of delivery according to manufacturer, no guarantee Subject to prior sale For new machines, the manufacturer’s warranty conditions apply

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Spindle tiltable: No Height adjustment: Handwheel Tilting adjustment: - Milling jaw adjustment: manual Height display: mechanical counter Tilt angle display: - Milling fence display: mechanical counter Dwedpogzlpksfx Aa Hof Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Extraction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg