Stroj za vrtanje lukenj za moznike

Gannomat DB 21

Stanje: rabljeno, Leto izdelave: 2014, complete in standard version with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electrical intermittent operation, - Automatic return of the drilling unit after reaching the set drilling depth - Automatic extension of the borehole depth for end-face drilling saves the need to adjust the drilling depth from flat to end-face borings. (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm and drilling depth end side 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple swiveling of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamp carrier, movable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm - Ideal stop system consisting of: - 1 stop ruler 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored drilling of shelves in carcass construction; also usable for line drilling in System 32. - Side stops and position settings, as well as the drilling height position via support table with mechanical digital counters. - Side stops can be easily swung away for quickest changeover from carcass to frame and row-hole drilling. - Clamping arms for clamp carrier suitable for row-hole positions up to max. 300 mm. - Ideal three-stage... Approx. weight: 400 kg gross, approx. 350 kg net Dimensions: (L x W x H) 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction funnel, dust-tested, ø 120 mm 1 set for row drilling in System 32 complete with: 1 base ruler 1050 mm (aluminum profile 40x40 mm) 1 template for row drilling 1 frame dowel device complete with: 1 central stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim Cgedoyyxkhspfx Ahxot

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: HOLZMA Model: OPT HPP 350/43/43/X Tip stroja: Žarkovna žaga Leto izdelave: 2005 Obratovalno stanje: še priklopljen Dolžina reza: 4.300 mm Hod potiskača: 4.250 mm Število prijemal: 6 Maksimalna hitrost pomika: 130 m/min Neprestano nastavljiv pomik Izstop žaginega lista: 80 mm Maksimalni premer žaginega lista: 350 mm Moč glavnega motorja: 9 kW Csdpfoxwwfvex Ahxogt Predrezila: Da Stran zadrževalnika: desna stran Krmiljenje: HOMAG POWER CONTROL, HOLZMA CADMATIC 4.0 Oznaka skladnosti: CE Teža: 5.000 kg

Stanje: rabljeno, Leto izdelave: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, with electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of borehole depth when drilling on the end-face. This eliminates the need to reset borehole depth when switching from wide-face to end-face drilling (+10 mm, for example, with dowel length 35 mm, drilling depth wide-face 14 mm, and drilling depth end-face 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves and intermediate panels, (aluminium profile 40x40 mm) with 3 drop-in stops. - With quick-change system, easily swapped from right to left stop side for mirror-image drilling of shelves and intermediate panels in carcass constructions. Also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for quick changeover from carcass to frame and line drilling operations. - Clamping arms for clamping rail designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. Cjdexnlflopfx Ahxjgt - 1 set of dowel drills: 5 HM dowel drill bits, Ø 8x77 mm, right-hand - 4 HM dowel drill bits, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, and electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of the borehole depth for end-face drilling, eliminating the need to adjust the drilling depth from wide-face to end-face (+10 mm, e.g. with dowel length 35 mm, wide-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves/intermediate panels (aluminium profile 40x40 mm) with 3 drop-in stops, - quick-change system, easily switched from right to left stop side for mirror-image shelf drilling in carcass construction; also suitable for line boring in System 32. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for ultra-fast changeover from carcass to frame and line boring. - Clamping arms for clamping rail suited for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. Extraction funnel, dust-teste

Stanje: novo, Leto izdelave: 2026, Natančen in precizen moznični vrtalni stroj za vrtanje v korpusu, vrtanje za okovje in vrstne izvrtine ter za vrtanje v okvirni konstrukciji v SISTEMU 32 mm. DB je moznični avtomat z 21, 27 ali 35 preciznimi vrtalnimi vreteni. Kratek opis: • Univerzalni vrtalni stroj za plošče in masiven les Cgjdpfxsdxz Nke Ahxot • Vrtalni stroj s sistemom za kompenzacijo kotnih napak • Vrtanje v SISTEMU 32 mm • Masiven precizen menjalnik za vrtanje znamke GANNOMAT • Najenostavnejše nastavitve prek mehanskih digitalnih števec za stranske in čelne prislone ter za višino vrtanja • Hitro menjavni sistem brez uporabe orodja za prislonilo • Moznične izvrtine, vrstne izvrtine, vse vrste pohištvenih spojnikov, izvrtine za ročaje in prehode, izvrtine za lončaste tečaje, skupine 3, 5 in 7 izvrtin, izvrtine za vodila predalov, izvrtine za okvirje vhodnih vrat in mizne noge itd.

Stanje: rabljeno, Skupna višina 6500 mm, tloris 2000 x 2000 mm, postavitev na prostem. Kompaktna filtrirna serija, model PKFP – 1 element – 1,92 x 1,92. Filtrirni sistem z stresanjem, nadtlakovno delovanje. Dolžina filtrirne vreče 2500 mm, premer 180 mm, filtrirna površina 105 m². 2 ventilatorja za surovi zrak, 2 cevi (premer 300 mm). 1 x ventilator KT 300, moč 15 kW, zmogljivost 6361 m³/h, letnik 1999. 1 x ventilator S 25 / 300, moč 7,5 kW, zmogljivost 7400 m³/h, letnik 1993. 1 x transportni ventilator 6,1 kW, zmogljivost 57 m³/min, letnik 1996. Skupen volumenski pretok cca 14.000 m³/h. Briketirni stroj Höcker Polytechnik tip BrikStar C 3 - 12.1225, motor 3,0 kW, premer briket 65 mm okrogle, kapaciteta cca 40-45 kg/h, odvisno od specifične teže materiala. Lokacija skladišča: Nattheim. Codevviytspfx Ahxegt

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: max. length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion tool (positioned 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue quantity - Glue flow monitoring - Mist oiler for glue nozzle Cjdpfx Ahsxdl Raoxogt - Standard dowel dimension: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feeding 1. BASE MACHINE - Sturdy steel frame construction - Axis movement in X, Y, and Z directions - Ball screw (Y and Z axis) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manual actuation via selector switch - 6 top hold-down cylinders, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 854 h, skupna širina: 2.450 mm, skupna višina: 1.100 mm, skupna dolžina: 1.900 mm, Lastna teža: 800 kg Cena: na zahtevo - Leto izdelave: 2017 - Dokumentacija na voljo: Ne Cgodpfjxan Utex Ahxot - Prisotna CE-oznaka: Da - Prisoten CE-certifikat: Ne - Serijska številka: 5037411-000150 - Obratovalne ure: 854 - Transportne mere: 1900mm x 2450mm x 1100mm (d x š x v) - Transportna teža [kg]: 800 kg - Transportni paketi [kos]: 2 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračunavanje razlike v ceni: DDV je odbiten za podjetja Dostava in odkup so možni kadarkoli za vse stroje iz industrijske panoge Yorick Diebels

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.060 kg, skupna višina: 1.800 mm, skupna širina: 1.830 mm, skupna dolžina: 2.000 mm, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 800 mm, dolžina podajanja os Z: 50 mm, največja hitrost vretena: 3.200 obr/min, teža obdelovanca (maks.): 25 kg, moč: 2,2 kW (2,99 KM), potreba po zraku: 750 m³/h, obratovalni tlak: 6 letvica, število vreten: 12, lastna masa: 975 kg, trajanje garancije: 12 meseci, Programmable drilling machine with Easy-Smart-Touch software, 3 controlled axes X, Y, Z, with the capability to machine grooves/channels and perform simple milling operations (accessory required), top-side operation and through-feed panel processing. Panel handling with triple suction cup system. Machine built according to CE regulations. STANDARD EQUIPMENT HEAD UNIT Head with independent spindles No. 7 vertical spindles No. 1 double horizontal spindle TH1 (X axis) for drilling front/back Manual panel positioner Panel end sensor for perfect joints Software for remote assistance Suction flange Anti-scratch brush table to prevent dust and chip accumulation Selectable working mode: operator side or continuous cycle Csdpou U Hgijfx Ahxogt HARDWARE & SOFTWARE 12” touchscreen with MAGGI patented NO TEXT system USB and Ethernet ports for file import, online assistance, and software updates Linux kernel-based system CNC memory for up to 1,000 programs Packaging: Wrapped on pallet (2200x2050x160 mm – 123 kg)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja višina reza: 204 mm, vrsta nastavitve višine: električni, višina mize: 910 mm, širina reza pri vzporednem vodilu: 1.300 mm, glavni premer žaginega lista: 550 mm, dolžina pomika: 3.200 mm, Oprema: motorna zavora, vrtilna hitrost brezstopenjsko nastavljiva, Altendorf F45 EvoDrive Year of manufacture: 2023, new machine - Template holder at the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - 5.5 kW (7.5 HP) VARIO motor (stepless speed control) - Preparation for 2-axis scoring unit - Table extension 840 mm - Double roller carriage length 3200 mm - Mitre angle fence - CNC rip fence 1300 mm - Front support roller Csdpjvw S Hfsfx Ahxjgt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Filter za izsesavanje prahu in žagovine. Cgodetzld Ujpfx Ahxet