Stroj za vrtanje dolgih lukenj / Stroj za vrtanje moznikov za okvirje

Ganner Gannomat Junior 323

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Blsdpfx Afecnw U Donsd Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: rabljeno, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, specific pressing force max. 2 kg/cm² Heating 2x 1.8 kW - Long-belt sander 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Sliding table saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control with main and emergency stop switches Machine on undercarriage Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended. Sale is made in "as is" condition. Bedpjxl Ha Sefx Afnsld Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. The following applies: "bought as seen". Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery conditions: ex stock.

Stanje: rabljeno, Weinig Profimat 22 with 4 left mobile units, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Bodperyb D Sjfx Afnold Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).

Stanje: rabljeno, moč: 5,5 kW (7,48 KM), največja višina reza: 130 mm, največja širina rezanja: 1.250 mm, premer žaginega lista: 400 mm, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, skupna dolžina: 3.200 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, skupna masa: 1.200 kg, dolžina rezanja (maks.): 3.000 mm, glavni premer žaginega lista: 400 mm, dolžina pomika: 3.000 mm, dolžina pomične mize: 3.000 mm, potrebna višina: 1.800 mm, zahteva za prostor dolžina: 3.200 mm, potrebna širina: 2.000 mm, dolžina mize: 3.000 mm, Oprema: dozator, No. 04518 Martin T 60 CLASSIC Sliding Table Saw Used, only 130 operating hours Blsdpfxjygav Rj Afnjd Main saw motor power 5.5 kW Sliding table length 3000 mm Saw blade diameter 250 - 400 mm Maximum cutting height 130 mm Motorized saw blade tilt 0° - 46° Quick-change blade system SprintLock Speeds 4000 / 4800 / 6000 rpm Speeds set by V-belt position 2-axis pneumatic scoring unit (Note: In the video, the scorer is not connected to compressed air, so the height adjustment is not shown, but the function is present) Cutting width approx. 1250 mm PowerPC control system Operation via touchscreen Control for cutting height, angle, and scorer Digital display for cutting height, angle, and width Dust extraction port below: 120 mm diameter, at upper blade guard: 80 mm diameter Cross table 1300 x 650 mm (LxW) Rip fence with 2 stops, extendable up to 3200 mm, adjustable by scale Guard arm swivels away Complete technical documentation available Includes various accessories and tools Transport dimensions approx. 3200 x 2000 x 1800 mm (LxWxH) Weight approx. 1200 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is. Technical data, condition description, year of manufacture, and delivery scope according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines, sold as seen Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm Bedpfsvu Hgbex Afnsld - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: rabljeno, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm * Both grooving spindles positionable via ball screw * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Blodpowgwlkjfx Afnod Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Blodeqlck Njpfx Afned Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 3750, Funkcionalnost: popolnoma funkcionalen, The machine glues solid wood up to 18.0 mm as well as rolled materials up to 3.0 mm. Trims roll material up to 3.0 mm thick (PVC, ABS, and real wood up to 2.0 mm). Flush trimming up to 18 mm. Rounding and chamfering milling stations. Total length: 3.20 m Power consumption: 7.1 kW Blodpoigad Eofx Afnsd Glue pot Cross-cut shears Infinitely variable feed speed Trimming saw for front and rear edges Flush trimming unit Rounding milling unit Chassis Extraction connection: 100 mm

Stanje: novo, Leto izdelave: 2024, Table length 2000 mm Table width 1000 mm Lifting height 400 - 1010 mm Load capacity 300 kg Machine weight approx. 220 kg Bsdpfx Afov Htkdonjld Description: - Sturdy support frame for worktops - Easy, back-friendly operation thanks to height adjustment via foot pedal - Optimum maneuverability with 4 swivel castors – 2 with locking brakes - Beech multiplex board 2,000 x 1,000 x 30 mm - 5-year warranty

Stanje: rabljeno, Leto izdelave: 2009, Premer odsesavanja: 250 mm Nazivni volumenski pretok: 3534 m³/h Bsdpfx Ajydql Defnjld Filtrirna površina: 22,6 m² Motor: 5,5 kW Briketiranje: zmogljivost ca.: 30 kg/h Premer briketa: 65 mm Motor: 3,0 kW Lokacija skladišča: Nattheim