Vrtalni vrtalni stroji

Gannomat Vantage

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment Ksdpfxek Dpp Sj Adkoww - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Kwjdpfx Aodqzcxsdkew Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/fixed: 90mm/120mm, weight: approx. 3000kg. An on-site inspection is possible. Kodpowv Umwofx Adkeww

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW Kodod Rg Dpspfx Adksww

Stanje: dober (rabljeno), Leto izdelave: 2006, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2006. Moč motorja: 7,5 kW Avtomatska vhodna miza 4,10 m (pretočni sistem) Avtomatska izhodna miza Kwjdpfx Adsxtxi Iskjw 6 izmetalnikov na desni izhodni mizi. Optimizacija z avtomatskim zaznavanjem napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. CE oprema. Dokumenti vključeni.

Stanje: novo, Leto izdelave: 2026, CNC avtomatski stroj za vrtanje in vtikanje moznikov za popolnoma avtomatsko vrtanje, lepljenje in vtikanje moznikov. Vrtalno in moznizno obdelovalni center s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: • Univerzalni CNC upravljani stroj za vrtanje in vtikanje moznikov • Nadzor izstreljevanja lepila preko GIC • Zaprt lepilni sistem • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatne horizontalne in vertikalne vrtalne vretena • Razi razbremeni CNC obdelovalne centre Kwjdpfjdx R Dfox Adkow • Optimalna dopolnitev za stroje za gnezdenje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Loading, unloading, drive-in, mobile ramp 10-ton ramp, 2 m width TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 2000 mm - Ramp handrails on both sides - Ramp rollers for easy movement - Central handle for relocation by forklift - Adjustable incline angle and flap height - Portable ramp elements with lubrication points - Ramp winch included - Custom ramp dimensions available at extra cost - Electric height adjustment available (optional) - ! ATTENTION: CHOOSE THE WIDTH OF THE FUNNEL BASED ON THE MINIMUM USABLE NOTCH ! ✅ Drive-in grating: Kedpfspk Auqex Adkeww Galvanized, anti-slip grating. Safe and stable platform. Best possible traction and stability for forklifts and pedestrians. The grating is galvanized and can be dismantled. ✅ Forklift handle – mountable on both sides: Convenient and quick attachment for forklift transport, enabling relocation of the ramp in any direction. The specially designed handle allows maneuvering even in tight spaces. ✅ Chain for connecting to truck, railcar, or fixed warehouse ramp: Robust steel chain is another advantage of our ramp, providing additional security to prevent shifting during loading and unloading. ✅ Solid side rails: Protective rails with option for removal and installation of a rack/roof (roof optional). ✅ Electric ramp height control: Smooth electro-hydraulic drive with high-performance pump. The pump requires 230V and can thus be operated from a standard outlet. ✅ Dual-sided hand pump: Hydraulic pump for ramp height adjustment in case no connection to the electro-hydraulic supply is available – dual lifting function. An excellent solution for work under all conditions. ⭐️ We offer the following options: ⭐️ - Ramp widths of 1900 - 2000 mm, 2150 mm, and 2500 mm PREMIUM. - Mobile ramps in 10 t, 15 t, 20 t and 25 t PREMIUM versions. - Ramp grating thickness: 3 - 5 cm. - Colours: red, blue, black. - Mobile ramp with tarpaulin.

Stanje: novo, Leto izdelave: 2026, Dvojna vrstična in okovja vrtalni stroj v SISTEMU 32. Vrtilni stroj z dvema vrtalnima tramovoma, vsak z 25 preciznimi vrtalnimi vreteni. Kratek opis: • Vrtanje vrstic lukenj v SISTEMU 32 mm • 50 (2 x 25) vrtin na en delovni takt • Izravnava globine vrtanja za različne globine vrtin • Masivni precizni vrtalni menjalnik GANNOMAT • Vrstično pohištveno spojno in skodelično pant vrtanje (opcijsko) Kwsdpfxodxz Nts Adkjw • Opcijska 3. vrtalna enota

Stanje: rabljeno, Dolžina: 1,5 m Širina: 1,5 m Skenirnik hlodovine Elinova 768. Kwjdpohhpbcjfx Adksw

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Product Dimensions: Kjdolcc U Eopfx Adkeww Length: 600/800 mm maximum 5800 mm Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight: maximum 30 kg/meter The maximum cross-sectional diagonal for the previous customer was 220 mm. The specified weights are only possible with a driven, customer-supplied roller conveyor. Technical Data: Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, cleaned, and oil-free Air Consumption: approximately 20 NL per cycle Maximum Input Pressure: 8 bar Noise Emission Value: less than 80 dB(A) Machine: see layout Operator Side: right-hand side in conveying direction Control Cabinet: fixed on the left side of the machine Paint: Machine RAL 7032, grey Black-yellow Roller Conveyor Height: 900 mm