Vakuumska membranska stiskalnica

Istra VPF-2-3000

Stanje: zelo dobro (rabljeno), MEMBRANE PRESS Gsdpfxsrwxz Re Ab Touk For laminating MDF panels with PVC, PP, and PET with VARIOPIN fully automatic underlay system Automatic front loading/unloading and preparation table (double tray cart 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions (mm): 1500 x 2800 Usable working area (mm): 1250 (or 2 x 600) x 2550 Front loading width from 1500 mm (usable width 1250 mm) Separate control cabinet and controls (with electronic programming device) SIEMENS SIMATIC Touch Panel Total installed power: approx. 50 kW OPTIONAL "Paternoster" roller magazine Unwinder (roll holder) with coating film cutting system

Leto izdelave: 2018, Stanje: rabljeno, x-axis travel: 1600 mm y-axis travel: 1300 mm z-axis travel: 700 mm Distance between uprights: 1500 mm Gujdpfxshx R Dvo Ab Tjk Distance spindle center to table: 225–925 mm Table size: 1800 x 1300 mm Table load: 4000 kg T-slots (Width x Spacing x Number): 22 x 160 x 8 mm Spindle taper: HSK-A 63 Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Spindle motor torque: 72.6/95.8 Nm Rapid traverse (X-Y-Z axis): 30,000 mm/min Feed rates X/Y/Z axis: 1–20,000 mm/min Tool changer: 20 positions Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approx.: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A63 Linear scales: Heidenhain Tool changer: 20 positions Chip conveyor – spiral: 2 pcs. Used CNC high-speed portal milling machine with extensive accessories at a special introductory price. Key manufacturers of the components used in this stock machine: · Controller and servo motors by Heidenhain, model TNC 620 · Ball screw support bearing – NSK Japan · X-axis ball screw – Hiwin Taiwan · Y-axis ball screw – Hiwin Taiwan · Z-axis ball screw – Hiwin Taiwan · 3-axis linear guides – THK Japan or Rexroth Germany · Electric spindle unit – HSK A63 24,000 rpm by IBAG · Linear encoder – Heidenhain · Pneumatic system – SMC Japan · Lubrication – Showa Japan · Covers – Hema · Air conditioning – Kaokung Taiwan · Spindle water cooler – Taiwan-Punkt · 3-axis cable carrier – Igus Germany · Coupling – KTR Germany · Machine enclosure – Mecano Germany · Relay – Omron · Electrical system – Schneider Germany · MPG manual pulse generator – Tosoku Japan For further information on the machine, standard accessories, and special accessories, please refer to the attachment. We are of course happy to organize delivery to your premises including assembly/commissioning, handover ready for operation, and on-site training.

Leto izdelave: 2010, Stanje: rabljeno, Panel return system for use with a single edge banding machine The panel is transported to the operator via a motorized conveyor belt and a roller/conveyor table. Moeller mini control unit Maximum panel dimensions: 2500 x 1450 mm Maximum panel height: 60 mm Gsdperq Dmrefx Ab Teuk Working speed: 8 - 25 m/min Working height from floor: 835 - 960 mm

Stanje: novo, Leto izdelave: 2025, CNC Milling Plotter 2040 SPECIAL is a precision machine engineered in Poland, designed for machining a wide variety of engineering materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (Dibond, carbon, Alucobond), soft metals, and more. CONSTRUCTION: The plotter is built entirely from high-quality steel. During the manufacturing process, all components undergo a dedicated heat-treatment process for added durability. WORKING AREA: The effective working area of the machine is 2100 x 4100 mm, and the entire worktable—manufactured using T-slot technology—measures 2100 x 4100 mm. Z-AXIS STROKE AND GANTRY CLEARANCE: The standard Z-axis travel is 200 mm, with an option to increase it to 400 mm on request. DRIVES: Gedpsin Uiljfx Ab Teuk Our machines are equipped with high-resolution, high-power digital drives ensuring optimal acceleration and speed in all axes. The X and Y axes utilize reliable, industry-proven helical racks for enhanced durability and precision, while the Z-axis is powered by a high-quality ball screw. All axes move on linear rail guides. SPINDLE: A powerful, water-cooled, and robust brushless spindle drives the cutting tool. The spindle features premium machine bearings for ultra-quiet operation and extended service life. Spindle speeds range from 6,000 to 24,000 RPM. The spindle is powered by a frequency inverter with higher output than the spindle itself, preventing RPM drops under heavy load. SOFTWARE: The machine is supplied with the latest version of CAD/CAM software, enabling quick and easy component design. The software then converts designs into G-code. Import of ready-to-use files from other software is also supported. CONTROL SYSTEM: Operation is via a controller equipped with its own processor and onboard memory for stable and reliable functioning. The controller features active vector analysis, providing smooth operation and minimal processing error. A resume function allows continuity of work after power loss, eliminating the need to restart programs. The built-in memory permits machine operation without constant program uploading. Optional features: * Vacuum table with Busch or Becker pump * Chip extraction system * Oil mist lubrication * Customizable table size

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, Popolnoma avtomatski ali polavtomatski CNC stroji za krivljenje in žaganje. Velikosti cevi od premera 6,0 do 150,0 mm. CNC stroji za krivljenje, zmanjševanje, žaganje, na voljo tudi po meri. Novi stroji na zalogi za prodajo. Cena v oglasu velja za type60nc stroj za krivljenje cevi premera 2,5 inča. Gsdpfsvl S Dgox Ab Tjuk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Manual tube bender HRB-3D 850 For bending tubes and solid material up to max. 12 mm Precise and repeatable bending is ensured by three battery-operated digital displays, which show the bending angle, tube feed, and tube rotation accurately. Guodettagdjpfx Ab Tek - 3-jaw chuck, 80 mm - Stop system for feed - Feed length approx. 850 mm The manual tube bender should be securely mounted on a workbench or frame (not included in the scope of supply). We would be pleased to provide you with a detailed offer if you send us your complete company address along with email and contact person.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, usable length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions (L/W/H): approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. Inspection on site is possible. Guodewg E Dhjpfx Ab Tek

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance Gsdsvvkfdepfx Ab Touk - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0401-230047, The FICEP Tipo G31 sheet metal processing center is designed for the efficient machining of steel sheets and flat steel in steel construction and steel trading applications. The Ficep Tipo G31 LG is capable of drilling, center punching, thread cutting, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting flat steel or sheet metal panels in a single system, with a maximum sheet width of 3,100 mm and a maximum sheet length of 14,000 mm. This CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. The system is suitable for sheet sizes as follows: sheet width minimum 200 mm, maximum 3,100 mm; sheet length minimum 2,500 mm and maximum 14,000 mm. Gujdporr Sqlefx Ab Tjk For plasma cutting, a powerful and modern Hypertherm HPR 400 XD plasma source is provided. Additionally, the system is equipped with an oxy-fuel cutting unit for processing thick material gauges. The drilling unit, featuring high torque and spindle speeds up to 6,000 rpm, is designed for use with carbide tools such as solid carbide drills, Nenok Multiplex indexable insert tools, and also for applications with HSS coolant channel drills for drilling diameters from 10 mm to 40 mm. The Ficep Tipo G31 system is in excellent condition and has very few operating hours.

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) Gusdpfx Aermucxjb Tek - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)