Faymonville F-S43-1Aaf / Extendable / Hydraulic Ramps nakup rabljenega (49.097)

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 Lrsdpfjtx Nwnjx Ag Ter * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Ljdsyhkqzepfx Ag Tjrr Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK Ljdporgzv Njfx Ag Tjrr * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, Leto izdelave: 2012, Oprema: ABS, * Faymonville STN-4UBX nizkopodsestno prikolico * Datum prve registracije: 02-2012 * hidravlično podvozje * hidravlično pomična dvojna zložljiva stranska ograja * vključno z vrvnim vitlom z radijskim upravljanjem Lodpfx Agezurgve Tsrr * 3. in 4. os s samonaključnim krmiljenjem * osi SAF * z zračno vzmetjo * bobnasta zavora * največja dovoljena masa: 11.900 kg * pnevmatike 235 / 75 R 17,5 * več slik in videoposnetkov pošljemo po WhatsAppu * Podatki so zgolj informativni in pridržujemo si pravico do sprememb in prodaje.

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm Ledpfxjy Auhuo Ag Tsrr

Stanje: rabljeno, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, Oprema: ABS, Izbor iz opreme. Celotna oprema na zahtevo. Prijeknica * s poševnimi robovi spredaj, približno 45° in zadaj, poševnost približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * trdna lesena obloga, debeline približno 30 mm, nakladalna površina v izvlečni izvedbi z zadnjo poševnostjo približno 1.000 mm x 8° * 5 parov pritrdilnih obročev, zložljivih navzven (nosilnost 5.000 daN) * 3 pari pritrdilnih obročev, zložljivih navzven (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščenih ležeče spredaj na nakladalni površini (nosilnost 10.000 daN) * izrezi v zunanjem okvirju nakladalne površine za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * trdna lesena obloga, debeline približno 48 mm, nad osmijo, obložena z rebrasto pločevino Podporke za sedelno prikolico * JOST-podporke za sedelno prikolico (mehanske) z 2-stopenjskim menjalnikom za dvigovno kapaciteto 24 t (testna obremenitev 50 t) Pnevmatike * 235/75 R 17.5 3PMSF Osi * BPW osi * dve osi fiksni, dve osi s sledilnim sistemom * z zračno vzmetjo in bobnasto zavoro s funkcijo dvigovanja/spuščanja * Sledilne osi z elektromagnetno blokado pri vožnji vzvratno, ki se aktivira prek prestave za vožnjo vzvratno ali ročno Zavorna naprava * WABCO zavorna naprava v skladu z uredbami EU, z EBS-E (4S3M) brez povezovalnih kablov za priklopno enoto Barvanje * Kakovostna dvokomponentna (2K) barva * Končna barva, enobarvna, v odtenku RAL 3002 karmin rdeča Dodatna oprema * Nosilec za rezervno kolo pred čelno steno (brez rezervne pnevmatike) * 2-palčni priklopni člen (King Pin) * Pocinkana jeklena čelna stena, višina približno 400 mm * Na pocinkani priključni letev spredaj, rumeno-rdeči zračni priključki * 4 kosi zavornih klinov z nosilcem na čelni steni, nosilci na zadnjem delu prijeknice za aluminijaste nakladalne rampe * Pocinkane zložljive podpore pod poševnostjo nakladalne površine * Nosilec za okroglo luč na zadnjem delu prikolice * Rumeno refleksno traku v skladu z uredbami EU, na strani, na izvlečni sekciji in na zadnji strani prikolice * Na prijeknici in na zadnji plošči, na levi in desni strani, nosilci za opozorilne table, vključno z vtičnico * Dinamometer za merjenje obremenitve osi * Vključno z diagramom obremenitve Lrodpfx Aszkx Huog Tjr Vključno s specialno dodatno opremo * Na prijeknici aluminijaste stranske stene in zadnja stena, vstavljive, približno 2.440 x 400 mm (D x V) * Orodjarna omara, pocinkana, integrirana v poševno prijeknico * 3 pari WADER-jevih zabojnikov na nakladalni površini za 20- (30-) ali 40-čevljen spodnji zabojnik * Premikajoče se vstavljive letev za aluminijaste nakladalne rampe na zadnjem delu vozila * 6 parov reže za vstavljive stojne palice, približno 100 x 50 mm * V zunanjem okvirju nakladalne površine, pocinkane, razširitve, izvlečne približno za 230 mm na stran * Dvignjena os na prednji osi, upravljanje prek TEBS E 2 LED-luč za vožnjo vzvratno, nameščena na zadnji plošči * 2 para Ferry-jevih obročev pod prijeknico in 2 para zadaj * Akustični opozorilni signal pri vožnji vzvratno, HRM-metalizacija (metalizacija z visoko odpornostjo)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2002, skupna dolžina: 13.200 mm, skupna širina: 2.530 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, medosna razdalja: 9.910 mm, barva: drugo, Leto izdelave: 2002, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Centralno mazanje = Opombe = Hidravlične rampe. Krmiljenje z uporabo trenja / krmiljenje z zakasnitvijo. Lredpfx Aezvy Dfjg Tjr Os Saf = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 235/75R17.5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Dvojne pnevmatike; profil pnevmatike na levi strani, notranja stran: 50 %; profil pnevmatike na levi strani, zunanja stran: 50 %; profil pnevmatike na desni strani, notranja stran: 50 %; profil pnevmatike na desni strani, zunanja stran: 50 % Zadnja os 2: Dvojne pnevmatike; profil pnevmatike na levi strani, notranja stran: 30 %; profil pnevmatike na levi strani, zunanja stran: 30 %; profil pnevmatike na desni strani, notranja stran: 30 %; profil pnevmatike na desni strani, zunanja stran: 30 % Zadnja os 3: Dvojne pnevmatike; profil pnevmatike na levi strani, notranja stran: 40 %; profil pnevmatike na levi strani, zunanja stran: 40 %; profil pnevmatike na desni strani, notranja stran: 50 %; profil pnevmatike na desni strani, zunanja stran: 50 % Teže Lastna teža: 11.050 kg Nosilnost: 36.950 kg Dovoljena skupna masa: 48.000 kg Vzdrževanje Tehnični pregled (APK): veljaven do 12.2026 Identifikacija Številka modela: OSD-48-03 / SEMI / HYDRAULIC RAM = Informacije o podjetju = VSE CENE SO NETO IN VELJAJO ZA IZVOZ. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) Govorimo tudi rusko. Prizadevali si bomo, da bomo navedli čim bolj točne informacije. Kljub temu iz objavljenih besedil ne moremo izpeljati nobenih pravic.

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 68574 Faymonville, Platform trailer * Year of manufacture: 1999 * Air suspension Lsdpfx Ageyib Aho Tsrr * Steering axle * Forced steering axle * Air supply coupling heads (red + yellow) * Connection plug: 2x 7-pin * Lifting and lowering device * Telescopic – extendable semi-trailer * Suspension: air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Superstructure manufacturer: ES-GE * Extension defective * Steering axles inoperative * Mobile/rollable Liability disclaimer: Subject to alterations, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Handling of all (export) documentation * Ordering export or customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport of commercial vehicles Please contact our trained specialist staff—we are happy to assist you.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 764.333 km, moč: 303 kW (411,96 KM), prva registracija: 09/2017, vrsta goriva: dizel, velikost pnevmatike: 385/65 R22.5, konfiguracija osi: 6x2, medosna razdalja: 6.200 mm, gorivo: dizel, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 7.400 kg, Leto izdelave: 2017, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, električno upravljanje oken, klimatska naprava, meglenke, tempomat, = Dodatne možnosti in dodatna oprema = - Aluminijast rezervoar za gorivo - Zračna vzmetitev Ledpfx Agozv Tyyo Terr - Radio/predvajalnik CD-jev - Stranska ogledala z električno nastavitvijo - Zaščita pred soncem - Digitalni merilnik hitrosti - Priključna gred (PTO) = Dodatne informacije = Splošne informacije Kabina: enojna Tehnične informacije Število valjev: 6 Prostornina motorja: 12.902 cm³ Konfiguracija osi Zavore: kolutne zavore Sprednja os: velikost pnevmatik: 385/65 R22.5; največja obremenitev osi: 9000 kg; profil pnevmatike levo: 20 %; profil pnevmatike desno: 20 %; vzmetenje: listna vzmet Zadnja os 1: velikost pnevmatik: 295/80 R22.5; največja obremenitev osi: 12000 kg; profil pnevmatike levo: 50 %; profil pnevmatike desno: 50 %; vzmetenje: zračna vzmet Zadnja os 2: velikost pnevmatik: 295/80 R22.5; dvižna os; največja obremenitev osi: 7400 kg; krmilna os; profil pnevmatike levo: 20 %; profil pnevmatike desno: 20 %; vzmetenje: zračna vzmet Teže Lastna teža: 13.160 kg Nosilnost: 12.840 kg Maksimalna dovoljena masa: 26.000 kg Funkcionalnost Nakladalna ploščad: Dhollandia Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Poškodbe: nobene

Stanje: rabljeno, največja dovoljena obremenitev: 37.885 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, Oprema: ABS, Izvleček – oprema Lrsdpszv A Aqjfx Ag Tor Nosilna površina * v izvlečni izvedbi z zadnjo nagibno površino, približno 1.000 mm x 8° Obloga iz trdega lesa * približno 48 mm debeline, nad osmi rebrasta pločevina JOST opore za sedelno prikolico * (mehanske) z 2-stopenjskim menjalnikom za približno 24 t dvižne obremenitve (približno 50 t testne obremenitve) BPW osi in vzmetenje * 2 trdni osi * 1 os s krmiljenim zglobom * Tehnična osna obremenitev: 12.000 kg na os Zračno vzmetenje * z ventilom za dvig in spuščanje Zavorna naprava * v skladu z direktivami EU, z EBS-E (2S2M) Dodatna oprema * 2-palčni kraljevi zatič * Ena pocinkana jeklena čelna stena, približno 400 mm visoka * Merilnik obremenitve za ugotavljanje osne obremenitve, vključno z diagramom obremenitve * Na podaljšku (gooseneck) aluminijaste stranske stene in zadnja stena, ki se lahko pritrdijo, približno 2.440 x 400 mm (D x V) * Ena orodjarna omara, pocinkana, integrirana v nagibni podaljšek (± 47 kg) * 3 pari WADER žepov za kontejnerje na nosilni površini za 20' (30') ali 40' kontejner. (± 30 kg) * 6 parov žepov za podpore za vstavljive podpore, približno 100 x 50 mm, na zunanjem okvirju nosilne površine. (± 18 kg) * Podaljški, pocinkani, izvlečni za približno 230 mm na stran (± 230 kg) * Dvignjena os na sprednji osi * Premikalne vstavne letve za aluminijaste priklopne rampe na zadnji strani vozila * 2 LED luči za vzvratno vožnjo, nameščeni na zadnji plošči * 2 para Ferry obročev pod podaljškom in 2 para zadaj (± 16 kg) * Štiri opozorilne table, ki se lahko izvlečejo za približno 400 mm, približno 423 x 423 mm, z LED pozicijsko lučjo. (± 25 kg) * Na opozorilnih tablah nosilec za rotacijsko luč * Rotacijska luč, priložena ločeno * HRM-metalizacija (metalizacija z visoko odpornostjo) Lakiranje * Končni sloj lakiranja, enobarvna barva RAL 3002, karminsko rdeča.

Stanje: rabljeno, največja dovoljena obremenitev: 35.600 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izvleček – oprema: Gooseneck prikolica: Gooseneck prikolica v izvedbi SNT za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm. Gooseneck prikolica na zadnji strani s poševnim robom približno 1.000 mm x 6°. Težavna obremenitev sedla: 18.000 kg Za SZM (posebno vozilo za prevoz): 4 x 2 in 6 x 2 Tovorni prostor: Raztegljiv tovorni prostor, dolžina približno 9.600 mm, s poševnim robom na zadnji strani približno 900 mm x 6°. Tovorni prostor za gooseneck prikolico je hidravlično dvigljiv in spuščljiv, dolžina približno 3.000 mm. Nosilnost do približno 9.000 kg Rampe: DR-10-900-4920-GR-HV-AXS Par dvodelnih jeklenih ramp AXS s dolžino približno 4.920 mm in širino približno 900 mm. Odprta rešetkasta površina. Hidravlično zložljivi končni deli ramp. Rampe je mogoče posamično hidravlično premikati približno 235 mm navzven in približno 365 mm navznoter. Maksimalna obremenitev in naklon glede na tehnično specifikacijo: C470319 Maksimalni naklon pri spuščenem tovornem prostoru: približno 9° Osi in vzmetenje: Osi in vzmetenje BPW, 1. in 2. os fiksna, 3. os s sistemom sledenja. Težavna obremenitev osi: 12.000 kg Elektro-magnetna blokada za vzvratno vožnjo, aktivira se prek vzvratne prestave in ročno. Zračno vzmetenje z ventilom za dvig in spuščanje. Komplet orodij za osi. Zavorna naprava: Zavorna naprava blagovne znamke WABCO EBS-E v skladu z direktivami EU. Brez povezovalnega kabla za vlečno enoto. Pnevmatike: Lodpjzkx Hbofx Ag Tjrr 235/75 R 17.5 3PMSF, dvojne pnevmatike. Proizvajalec po naši izbiri. Indeks nosilnosti 143/141J (144/144F) Barvanje: 6-plastna končna obdelava: Celotna jeklena konstrukcija po varjenju peskana. 1 plast osnovne barve na podlagi cinka, 1 plast prajmerja. Končna barva z 2 plastmi 2-komponentne barve (akril), enobarvna v barvi RAL 3002 karmin rdeča, nato zapiranje votlin s posebnim voskom. Platišča v srebrni barvi. Večbarvno in posebno barvanje proti doplačilu. Dodatna oprema (vključno): - ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S in 15-polna. - 24N priključek v skladu s standardom ISO-1185 - 24S priključek v skladu s standardom ISO-3731 - 15-polni priključek v skladu s standardom ISO-12098 - 3 kW elektro-hidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov. - Parkirni položaj na gooseneck prikolici za opozorilne table, ko niso v uporabi. - Zunanji nosilec na gooseneck prikolici z luknjami za pritrditev vijakov za pritrdilne obroče. - Prva luknja je približno 200 mm od sprednjega roba, nato približno vsakih 400 mm. - Ena luknja za pritrditev na zadnji zgornji strani zunanjega nosilca gooseneck prikolice za vijak za pritrdilni obroč. - 1 par vijakov za pritrdilne obroče (LC 10.000 daN). - 3 pari vgrajenih pritrdilnih obročev v notranjosti zunanjega nosilca gooseneck prikolice (LC 5.000 daN). - 3 pari vgrajenih pritrdilnih obročev na sredini gooseneck prikolice (LC 5.000 daN). - 1 par vgrajenih pritrdilnih obročev na zadnji strani na sredini gooseneck prikolice (LC 5.000 daN). - Na gooseneck prikolici in poševnem robu rešetkasta površina s približno 5 mm jeklene pločevine za dodatno okrepitev. - 2 palčni kraljevi zatič. - Vodilna plošča na gooseneck prikolici za sedežno ploščo, široka približno 500 mm. - Mehanske podpore sedla z 2-stopenjsko prestavo in ročico. - JOST Modul B - statična preizkusna obremenitev = 50.000 kg - Neprekinjena rešetkasta površina z 5 mm podlago iz jeklene pločevine kot dodatna okrepitev, zasnovana za točkovno obremenitev: - Zaklepanje tovornega prosto

Stanje: dober (rabljeno), prva registracija: 02/1968, barva: modra, Leto izdelave: 1968, Lastna teža: 7.325 kg Nosilnost: 24.675 kg Skupna dovoljena masa: 32.000 kg Tehnično stanje: dobro Vizualno stanje: dobro Cena: po dogovoru Za več informacij kontaktirajte Arieja. Lsdpfx Agszavp Te Tjrr

Stanje: rabljeno, prevoženi kilometri: 369.767 km, moč: 368 kW (500,34 KM), prva registracija: 04/2013, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, konfiguracija osi: 6x2, medosna razdalja: 3.700 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: zelen, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: zrak, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1.100 mm, Leto izdelave: 2013, Oprema: ABS, AdBlue, centralno zaklepanje, klimatska naprava, spojka prikolice, zapora diferenciala, = Dodatne možnosti in dodatna oprema = Ostalo - Daljinsko upravljanje centralnega zaklepanja - Dvigalna os - Zračna vzmetitev - Priklopna glava - Dodatne luči Ostalo - Zaščita pred soncem = Opombe = Prostor za tovor: 520 cm Višina tovornega dna: 110 cm Višina tovora v prostoru za kolo: 90 cm. = Dodatne informacije = Tehnične informacije Število cilindrov: 6 Konfiguracija osi Zavore: Kolutne zavore Vzmetenje: Zračna vzmetitev Sprednja os: Dimenzija pnevmatik: 385/55R22.5; Krmilna; Globina profila pnevmatik, leva stran: 60 %; Globina profila pnevmatik, desna stran: 60 % Zadnja os 1: Dimenzija pnevmatik: 315/60R22.5; Dvojne pnevmatike; Globina profila pnevmatik, leva stran, notranja: 70 %; Globina profila pnevmatik, leva stran, zunanja: 70 %; Globina profila pnevmatik, desna stran, notranja: 70 %; Globina profila pnevmatik, desna stran, zunanja: 70 % Zadnja os 2: Dimenzija pnevmatik: 315/60R22.5; Dvojne pnevmatike; Globina profila pnevmatik, leva stran, notranja: 70 %; Globina profila pnevmatik, leva stran, zunanja: 70 %; Globina profila pnevmatik, desna stran, notranja: 70 %; Globina profila pnevmatik, desna stran, zunanja: 70 % Mase Ledpfx Agszc Rhce Terr Lastna teža: 10.300 kg Dovoljena nosilnost: 17.700 kg Maksimalna dovoljena masa: 28.000 kg Identifikacija Številka modela: FM 500 6x2 / TRANSPORT STROJEV / = Informacije o podjetju = VSE CENE SO NETO ZA IZVOZ, Joris Versteijnen NL-DE-GB)Wouter Greutink NL-DE-GB-ES-IT)Govorim rusko. Prizadevali si bomo, da bomo navedli čim bolj točne informacije. Kljub temu iz navedenih besedil ne moremo pridobiti nobenih pravic.

Stanje: novo, največja dovoljena obremenitev: 73.540 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment specification. Full equipment details available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of fold-out lashing rings on the exterior (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center of the gooseneck (LC 10,600 daN) * Suitable for tractor units 6 x 4 or 8 x 4, 2-axle Compact front bogie: * Hook coupling front and rear, length approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: * Telescopic excavator deck with drive-over deck hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear bogie: * Mechanical pin-eye coupling at the front for connecting a low-bed trailer * Rear end cross member, bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Oscillating axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation Lrodsxbmpljpfx Ag Tjr Tyres: * Front bogie: 8 x (manufacturer’s choice; M+S) 285/70 R19.5 * Rear bogie: 16 x (manufacturer’s choice; M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel structure automatically shot-blasted after welding using a turbine blasting unit. Second abrasive blasting with corundum for optimum coating adhesion * Full chassis HRM-metalized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating in 2 layers of 2-component top coat, single color in RAL 3002 carmine red, according to RAL 841GL system Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side panels and rear wall on the gooseneck, approx. 400 mm high, anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow controller (20 l/min) * Overhead support for supply lines; tractor unit tank must hold at least 80 l * With MAX Trailer coupling pieces; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air-powered tools * BEKA-MAX centralized lubrication for 2-axle bogie with standard grease NLGI-2 * One 7-pin socket each left and right at the rear of the front bogie for warning panels * Threading option (ø approx. 40 mm) every approx. 500 mm on the outside of the top flange of the excavator deck outer tube for screw rings (LC 16,000 daN) * Foldable extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX centralized lubrication for 4-axle bogie with standard grease NLGI-2 * Socket on the rear bogie for cable remote control of rear steering * Rear bogie with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right * Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine * Operation of the rear steering, in addition to cable remote control * One LED work spotlight each left and

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 30.400 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2011, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles steered, ABS (anti-lock braking system), extendable, lashing rings, attachable loading ramps, front support, rear support, side aluminium underrun protection, storage box. Lsdpfx Agoxxkqzs Tjrr Body: 4-axle low-bed semi-trailer with attachable loading ramps, SAF axles, 3rd and 4th axles steered, 13 pairs of lashing rings, 10 pairs provisions for insertable stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm load height in the low-bed area, low-bed length retracted approx. 9,500 mm, TÜV inspection due, aluminium ramps available at an extra charge of EUR 1,500. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted.

Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website. Extract from the equipment list. Full specifications available upon request. Loading Platform: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform, double extendable, length approx. 9,300 mm * A support plate, approx. 200 mm wide, is permanently welded to the central beam * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for operating hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside * 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 1x at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside * Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air bellows venting activated when parking brake is applied * Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar * Approx. 32 mm wooden floor on the gooseneck and the loading platform * On the large-section extension tube, one locking position every approx. 500 mm * On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN) * 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder mounted under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram Lsdpfx Aoyvnd Neg Torr * 1st axle equipped with automatic lift axle function as well

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: * Rear chassis with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings Lrodpfx Asy Uwu Isg Ter * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: Lrjdpfxjzahp So Ag Tsr * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Lrjdeg Sk Tropfx Ag Ter Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 10/1993, dolžina tovornega prostora: 7.010 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 10.610 mm, skupna širina: 2.490 mm, medosna razdalja: 6.210 mm, barva: drugo, Leto izdelave: 1993, Axle Configuration Maximum front axle load: 000 kg Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Weights Unladen weight: 6,220 kg Lrjdpfxszacfuj Ag Tjr Payload: 21,780 kg Gross vehicle weight (GVW): 28,000 kg Functionality Loading platform height: 92 cm Maintenance, History and Condition APK (Technical Inspection): valid until 12/2026 Technical condition: very good Visual condition: very good Identification Registration number: WK--RF = Company Information = If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: Mobile (Dutch - English - German - French - Spanish - Italian): Available on WhatsApp and Viber. Mobile (Dutch): Available on WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account detailed below. Always verify the payment details as stated on our website. If you receive any other information, please contact us immediately. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: Lredpfx Agjxarl Nj Ter - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, skupna dolžina: 17.700 mm, skupna širina: 2.990 mm, skupna višina: 3.810 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70 R17.5 Double Fitted (143/141J), barva: rdeča, Leto izdelave: 2024, Oprema: dvižna zadnja plošča, Color: Red Payload: 100,250 kg Weights: King pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg Gross vehicle weight (GVW): 134,000 kg Unladen weight: 33,750 kg Loading capacity: 100,250 kg Axles: Axle brand: BPW ECO PLUS Hydraulic suspension 7 steered axles (2nd axle rigid) First two axles liftable Drum brakes SN 3020 brakes for ABS, with sensors Tyres: 245/70 R17.5 twin tires Load index 143/141J Dimensions: Length: 17,700 mm Extensions: 19,500 mm Max. extended length: 37,900 mm Loading platform width: 3,990 / 3,450 mm Loading platform height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information: NATO plug Hydraulically foldable ramps Outriggers + planks for widening the loading platform Electro-hydraulic pump for trailer functions Spare wheel + holder Work lights Rear bumper with lights 2.0” king pin Central lubrication system Lashing rings Wooden loading platform Marker boards for oversize load Remote control = Further information = General information Year of manufacture: 2024 Axle configuration Tyre size: 245/70 R17.5 twin tires (143/141J) Axle brand: BPW ECO PLUS Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: twin tires; lift axle; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 2: twin tires; lift axle; max. axle load 12,000 kg; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 3: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 4: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 5: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 6: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 7: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 8: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Weights Unladen weight: 33,750 kg Payload: 100,250 kg Gross vehicle weight: 134,000 kg Functional Loading platform height: 105 cm Extendable body: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Financial information Price: On request Lodpfx Ageuu E Tio Terr

Stanje: zelo dobro (rabljeno), prva registracija: 09/2015, dolžina tovornega prostora: 20.180 mm, širina tovornega prostora: 3.000 mm, barva: drugo, Leto izdelave: 2015, Damage: none YAFTL2007F0017329 = Further Information = Unladen weight: 13,600 kg Payload: 28,400 kg Gross vehicle weight: 42,000 kg Technical condition: very good Visual condition: very good Price: On request Registration number: DW205AH Lrjdpfx Agsymrb Sj Tsr = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are exclusive of VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber.) MOB: Dutch (Available on WhatsApp and Viber.) When making a payment by bank transfer, the funds must be transferred to our bank account listed below. Always check the payment details stated on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version * 5 pairs of outward-folding lashing rings (LC 5,000 daN) Lrodsu Sd U Ujpfx Ag Tjr * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps Lredpfxjyvnfgj Ag Tjr * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-