Cormak Bs-128Hdrc 230V nakup rabljenega (3.602)

Stanje: novo, Leto izdelave: 2026, The BS370H is a robust and reliable semi-automatic bandsaw with miter cutting capabilities from -45° to +60°, featuring hydraulically controlled vice and saw arm. This indispensable machine for any metalworking shop is perfectly suited for cutting tubes, profiles, and solid materials. The blade guides are fitted with special carbide plates and bearings, greatly enhancing blade guidance, longevity, linearity, cutting precision, and quality. Carbide guidance significantly reduces wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed coolant circuit. The machine’s drive is transmitted via a worm gear. It features a three-phase motor with two cutting speeds and motor thermal protection. The bandsaw is equipped with a DIAL TENSIOMETER – a blade tension sensor and an automatic shut-off in the event of blade breakage. The upper part of the base is shaped as a tray for coolant drainage and chip collection during material cutting. The base supports a cast iron worktable with a swiveling arm and control panel located on a separate arm. During the cutting process, the main cutting motion is provided by the moving saw blade, while the feed is achieved by lowering the saw arm. The descent speed of the arm (cutting speed) is adjustable via a hydraulic cylinder. Bandsaw for precise, professional work. Gusdpfx Aeycqhcsfweb Torsion-resistant, rigid arm and frame made from spheroidal cast iron. Dual-sided quick-locking vice. In semi-automatic mode, after pressing START, the hydraulic vice clamps the material, hydraulics lower the saw arm, the end switch signals the cut is complete, and the hydraulics raise the saw arm. Technical specifications Blade size: 3160 x 27 x 0.9 mm Blade tension: mechanical (manual) Blade speeds: 34, 68 m/min Arm descent regulation: stepless – hydraulic cylinder Vice base height: 890 mm Saw wheel diameter: 380 mm Power supply: 3-phase, 400V Total power: 1.5 kW Coolant pump motor power: 46 W Dimensions with base: 1850x950x1500 (2050) mm Weight: 491 kg

Stanje: novo, Leto izdelave: 2026, BAND SAW CORMAK BS912N Specification: - The material to be cut can be fed manually or by any mechanical device, while the saw feed is fully automatic. - The descent speed of the arm is controlled by a hydraulic cylinder. The appropriate descent speed is achieved using a valve that regulates the oil flow between the cylinders' chambers. - The desired linear speed of the blade is achieved by changing the gear ratio on the pulleys located between the worm gearbox and the drive motor. The coolant tank with an electric pump is situated in the machine base. - Precision and robust build quality place this machine at the top of band saws in its class, with a large cutting capacity of 230 mm and the ability to cut at any angle from 0 to 45 degrees. - The CORMAK BS912N band saw, thanks to innovative improvements and the use of bimetallic blades from a renowned manufacturer, is widely used in all metalworking shops where precision, quality, accuracy, and speed of cutting are crucial. - Cutting angle is set using a swiveling vise, within a range of 0 - 45°. - The solid vise walls are made of durable cast iron. A protractor scale is located at the rear of the vise for convenient and quick angle adjustment. - Both blade guides are equipped with a cooling system that supplies coolant to both the blade and the workpiece. - This model is equipped with a convenient handle for blade tensioning and a quick clamp for the vise (workpiece). - On the machine arm, there is a blade tension indicator, along with a table for selecting blade pitch and cutting speed depending on the type of steel being cut. - In the lower arm position (once the material is cut), the drive of the cutting blade is automatically switched off by a new generation limit switch. - Safety during operation is ensured by an electrical installation compliant with all CE requirements. The machine has a limit switch stopping the machine at the end of the cutting process, an emergency stop (safety mushroom), and a series of micro-switches that deactivate the machine in case, for example, the belt or blade cover is opened. Gujdsy En E Sopfx Afwob - Additionally, our machine model is equipped with a wire brush that cleans the cutting blade of chips—this prevents the blade from clogging and increases cutting efficiency. - The blade guides are equipped with special carbide plates and bearings, which significantly influence blade guidance, its service life, straightness, cutting accuracy, and quality. - Carbide guidance significantly limits the wear of both the machine and the blade itself! - The arm is made of profiled ductile cast iron, which ensures rigidity during operation and absorbs all types of vibrations. - The control panel is located on the saw arm. Technical Data Motor: 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Blade dimensions: 2655x27x0.9 mm Blade speeds: 24/36/49/71 m/min Cutting angle range: 0 to +45 degrees Machine packaging dimensions: 1420x500x1150 mm Weight: 151/202 kg ENGLISH MANUAL

Stanje: novo, Prodajam visokokakovostni električni motor priznane znamke ATB Austria Model SNB 80 4C 11R Enofazni motor s kondenzatorjem, pripravljen za delo, zelo dobro ohranjen, skladiščena oprema. Godsyvam Ujpfx Afwjub Idealno za črpalke, ventilatorje, stroje in delavnice. ⚙️ Tehnični podatki Proizvajalec: ATB Model: SNB 80 4C 11R Moč: 0,55 kW Obrati: 1370 o/min Napajanje: 230 V Frekvenca: 50 Hz Tok: 4,10 do 4,40 A cos φ: 0,93 Stopnja zaščite: IP55 Izolacijski razred: F Izvedba: IMB3 na nogah

Stanje: novo, Leto izdelave: 2026, Band Saw CORMAK HBS275 for cutting pipes, profiles, and rods is commonly used in all metalworking shops where precision, quality, and cutting speed are essential. This model features a swiveling arm from 0° to 60°, and the blade guides are based on carbide inserts. The frame design ensures accurate and quiet operation. Machine Characteristics The horizontal metal band saw with a swiveling arm enables cutting perpendicular to the axis of the material as well as at any angle from 0° to 60°. The workpiece can be fed manually or using any mechanical device, while the tool feed is automatic. The blade guides are fitted with special carbide inserts and bearings. This greatly influences the guidance of the blade, its lifespan, straightness, accuracy, and cut quality. Carbide guidance significantly reduces wear on the machine and the blade. The machine comes equipped with an efficient coolant pump in a closed-loop system. The saw arm is made from a solid cast iron casting, and together with the 27 mm wide blade used in this saw, it enables fully repeatable series cuts of both profiles and solid materials. The vise is placed on an adjustable bed and features a quick-release clamp. The blade guides are fitted with carbide plates and a roller bearing system. It is the CARBIDE GUIDES that are responsible for cutting precision and straightness. The arm is equipped with an automatic blade tension sensor and is inclined at 25 degrees, which increases blade life. A cleaning brush is mounted at the bottom of the arm for optimal blade cleanliness and functionality. The machine’s drive is transmitted via a worm gear. The base features a cast iron work table with a swiveling arm and a control panel mounted on a separate arm. During cutting, the main cutting motion is the advance of the blade, while the feed motion is the arm's descent. The descent speed of the arm (cutting speed) is controlled via a hydraulic cylinder. Feed speed is regulated on the saw's control panel. There are two cutting speeds available: 37.5 and 75 m/min. In the lowest arm position (after finishing the cut), the blade drive is switched off automatically. Safety is ensured by blade covers and micro switches that stop the motor once the cutting cycle ends or any of the covers are opened. Additional protection involves automatic shutoff of the saw in case of blade breakage. The machine’s drive is provided by a motor with a worm gear. The motor is equipped with a thermal fuse to protect against overheating during operation. Technical Data TOTAL POWER OUTPUT: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: Hydraulic cylinder BLADE LENGTH: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (with raised arm) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity: Angle Round Rectangle Square 0º ø220 260 x 140 mm 200 x 200 mm Gedpsudi Unefx Afwsub 45º R ø160 160 x 140 mm 160 x 160 mm 60º R ø100 120 x 100 mm 100 x 100 mm Price does not apply to machines purchased in Poland.

Stanje: novo, Leto izdelave: 2026, Horizontal band saw with a swiveling arm for metal cutting, enables cutting in a plane perpendicular to the axis of the workpiece as well as at any angle from 0 to 60º. Material feeding can be performed manually or with any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings, which significantly affects blade guidance, its durability, cut straightness, precision, and cut quality. The saw arm is made of profiled CAST IRON. The control panel is located next to the arm. The drive from the electric motor is transmitted to the drive wheel of the cutting blade via a worm gear motor. The blade is tensioned on two cast iron wheels with a manual tensioner and guided by an adjustable rolling and linear carbide guide set. There is a separate coolant reservoir with an electric pump inside. The descent speed of the arm (cutting speed) is adjusted with a hydraulic cylinder. Feed speed is controlled via the control panel. Two blade speeds are selectable: 36 and 72 m/min. In the rest position of the arm (after the cutting process), the blade drive is automatically switched off. Safety is ensured by the blade covers and microswitches that stop the motor after the cutting cycle or upon opening any of the covers; additional protection is provided by the automatic shutoff of the bandsaw in the event of blade breakage. Technical specifications Band saw blade dimensions 2455×27×0.9 mm Blade tensioning mechanical (manual) Blade speed 36, 72 m/min Feed speed Gjdjvuf S Njpfx Afwjub 0–50 m/min (stepless feed) Arm descent control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400 V Motor power 1.1 kW Net/Gross weight 220 kg / 284 kg Warranty 12 months Manual operation yes CE declaration yes Miter angles 0º ø230 mm 260×150 mm 225×225 mm 45º ø165 mm 180×130 mm 165×165 mm 60º ø105 mm 100×90 mm 110×110 mm *Please note: the device is supplied by default without a CEE connector, as there are many different types. If you would like to receive a connector along with the machine, please contact the seller before purchasing or during the ordering process.

Stanje: novo, Leto izdelave: 2026, Professional CORMAK BS 150-200 belt grinder for coarse grinding and polishing of metal. Suitable for a variety of shapes and materials. The 150x2000 mm abrasive belt size and powerful 3 kW motor make it highly versatile in its applications. Machine Features The CORMAK BS150-200 belt grinder with extraction is an excellent combination of efficiency and stability. It is equipped with a robust, rigid steel base to ensure stability during operation. With a single working speed, precise grinding becomes easier than ever before. The infinitely adjustable grinding angle with locking function allows for precise positioning and maintaining the optimal angle during work. The large grinding surface facilitates handling and machining of various workpieces. Additionally, the belt grinder comes standard with an efficient extraction system, eliminating dust and ensuring a clean and safe working environment. Good stability thanks to a sturdy and rigid steel base Two working speeds Adjustable grinding angle with lock Large grinding surface Extraction system provided as standard Fitted with two extraction ports, each 100 mm in diameter Quick belt change system Tilted protective disc Spring tensioning system for automatic belt tensioning Gsdpfx Aovu Uqnsfwoub Product Specifications: Abrasive belt dimensions (L x W) [mm]: 2000x150 Belt speed [m/s]: 15/30 Motor speed [rpm]: 1400/2800 Motor power [kW]: 2.5/3.0 Weight [kg]: 117 Dimensions (L x W x H) [mm]: 1000x650x1150 Power supply [V]: 400 Extraction motor power [kW]: 0.37

Stanje: novo, Leto izdelave: 2026, Efficient and precise CNC milling router CORMAK C2030 (working area 2100 x 3100 mm) BSP, standard equipped with SERVO drives, features a steel and cast iron frame, providing high rigidity and resistance to overload during operation. Designed for processing and cutting wood materials, chipboard, MDF, OSB, plywood, as well as plastics like PVC, plexiglass, and dibond. Training at our headquarters is included in the price with every machine purchase! Construction - Rigid welded steel frame - Gantry arms made from thick, hardened, powder-coated steel plates for increased stiffness, ensuring high-quality finished parts Godpfx Aoiz A Rqjfweub Work Table - Hybrid technology work table - T-slots for manual material clamping (working dimensions: 2010 x 3010 mm) Drive System - SERVO motors used for high-power machine tool drives, providing optimal acceleration and speed in all axes - X and Y axes feature high-quality rack-and-pinion gears, praised by users for their durability and precision - All axes move on linear rail guides - Tool height sensor included - Linear bearing system: trapezoidal rails with Hiwin carriages Spindle - High-grade spindle renowned for durability - Air-cooled system - High-quality machine bearings for exceptionally quiet operation and extended service life - Tool height measurement sensor included - Spindle speed range: 4500–18000 rpm - Tool holder: 3 pcs. ER32 collets (diameters: 1/8", 1/2", 5–6 mm) Software - Compatible with ARTCAM PRO software - Optional: UCANCAM V11 CAD/CAM CNC software (supports import from Corel, AutoCAD, etc.; import/export, text editor, and many advanced features) - Software enables fast, easy design and exports to G-code; compatible with files from other programs DSP Control - Digital Signal Processing (DSP) technology - DSP controller with built-in processor and memory for reliable, user-friendly operation - Guarantees smooth, precise machine movement Technical Specifications Spindle: 5.5 kW / 18,000 rpm, inverter-driven, air-cooled Working area: 2100 x 3100 mm (up to 2680 x 3600 mm) Max spindle clearance: 350 mm Control: DSP Software resolution: 0.001 mm Software: ARTCAM PRO (optional: UCANCAM V11 CAD/CAM CNC) Power supply: 400V Weight: 1350 kg Machine dimensions: 2680 x 3600 x 2200 mm Table height: 715 mm Guides: linear rails Drive transmission: rack-and-pinion Axis drives: hybrid servo motors Optional Equipment - Gantry height increase (Z-axis) to 450 mm - UCANCAM V11 software (supports import from Corel, AutoCAD; import/export, text editing) - Tool kit: mills, drills, holders For more information, please contact us.

Stanje: novo, Leto izdelave: 2026, Taśma tnąca CORMAK HBS260 do cięcia rur, profili i prętów znajduje szerokie zastosowanie we wszystkich warsztatach ślusarskich, gdzie liczy się precyzja, jakość i szybkość cięcia. Model wyposażony jest w ramię obracane w zakresie 0-60°. Konstrukcja ramy zapewnia dokładną i cichą pracę. Posiada wyjmowaną tacę na wióry, ułatwiającą czyszczenie! Charakterystyka maszyny Pozioma piła taśmowa do metalu z uchylnym ramieniem umożliwia cięcie w płaszczyźnie prostopadłej do osi ciętego materiału oraz pod dowolnym kątem w zakresie od 0 do 60°. Materiał podawany jest ręcznie lub mechanicznie, a posuw narzędzia realizowany jest automatycznie. Prowadnice taśmy wyposażone są w specjalistyczne płytki z węglików spiekanych oraz łożyska. Ma to ogromny wpływ na prowadzenie taśmy, jej trwałość, prostoliniowość, dokładność oraz jakość cięcia. Prowadzenie węglikowe znacznie wydłuża żywotność maszyny oraz piły taśmowej. Urządzenie wyposażone jest w wydajną pompę chłodziwa z zamkniętym układem chłodzenia. Ramię piły wykonane z jednolitego żeliwa, w połączeniu ze stosowaną w tej przecinarce taśmą tnącą o szerokości 27 mm, umożliwia w pełni realizację cięć seryjnych zarówno profili, jak i materiałów pełnych. Imadło umieszczone jest na regulowanym łożu i wyposażone w szybki zacisk. Prowadnice brzeszczotu wyposażone są w płytki z węglików spiekanych oraz system łożysk tocznych. To właśnie wyśrodkowane prowadnice węglikowe odpowiadają za precyzję i prostoliniowość cięcia. Guodpfx Aomrnk Eofwjb Górna część podstawy maszyny posiada kształt wanny, przeznaczonej do odprowadzania chłodziwa i zbierania wiórów powstających podczas cięcia. Do podstawy przymocowano żeliwny stół roboczy z obrotowym ramieniem oraz panel sterowania usytuowany na osobnym wysięgniku. Główny ruch tnący realizowany jest przez przesuw taśmy tnącej oraz opadanie ramienia. Prędkość opuszczania ramienia (prędkość cięcia) regulowana jest za pomocą siłownika hydraulicznego. Prędkość posuwu ustawia się na panelu sterowania. Dostępne są dwie prędkości cięcia taśmy: 35 oraz 70 m/min. W dolnej pozycji ramienia (po ukończeniu cięcia) napęd taśmy tnącej jest automatycznie wyłączany. Bezpieczeństwo zapewniają osłony taśmy oraz mikroprzełączniki, które zatrzymują silnik po zakończeniu cyklu cięcia lub otwarciu którejkolwiek z osłon. Dodatkowe zabezpieczenie polega na automatycznym wyłączeniu piły w przypadku zerwania taśmy. Wymiary taśmy tnącej [mm]: 2520 x 27 x 0,9 Naciąg taśmy: mechaniczny (ręczny) Prędkości taśmy [m/min]: 35, 70 Regulacja opadania ramienia: płynna – siłownik hydrauliczny Wysokość podstawy imadła [mm]: 860 Średnica koła napędowego piły [mm]: 300 Zakres odchylenia ramy piły [°]: 0-60 Zasilanie: 3-fazowe 400V Moc silnika głównego [kW]: 1,1 / 1,5 Moc silnika pompy chłodziwa [kW]: 0,05 Wymiary z podstawą [cm]: 150 x 80 x 140 Waga [kg]: brutto/netto – 210 / 180 kg *Prosimy pamiętać, że maszyna jest standardowo sprzedawana bez wtyczki CEE, ponieważ istnieje wiele jej wersji. Jeśli chcą Państwo otrzymać ją wraz z urządzeniem, prosimy o kontakt ze sprzedającym przed zakupem lub podczas realizacji zamówienia. Cena jest ceną netto. Koszty transportu nie są wliczone w cenę. Aby uzyskać więcej informacji, prosimy o kontakt telefoniczny lub mailowy. Zachęcamy do zapoznania się z pełną ofertą na naszej stronie internetowej.

Stanje: novo, Leto izdelave: 2026, The CORMAK HBS260 bandsaw for cutting pipes, profiles and bars is widely used in all metalworking workshops where precision, quality and cutting speed are important. This model is equipped with a swiveling arm adjustable from 0–60°. The robust frame construction ensures precise and quiet operation. It features a removable chip tray for easy cleaning! Machine Features The horizontal metal bandsaw with a swiveling arm allows perpendicular cuts as well as angled cuts in the range of 0 to 60°. Material can be fed manually or via any mechanical device, while the blade feed is automatic. The blade guides are equipped with special carbide plates and bearings. This greatly enhances blade tracking, blade life, cutting accuracy, and cut quality. Carbide guidance significantly reduces wear on both the machine and the blade. The machine is equipped with an efficient coolant pump with a closed circuit system. The saw arm is made from a single cast iron piece, and together with the 27 mm wide blade used in this saw, it allows reliable, repeatable serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features a quick clamp. The blade guides are equipped with carbide plates – solid carbide inserts – and a ball bearing system. It is THESE CARBIDE GUIDES that ensure the precision and straightness of the cuts. The upper surface of the base is formed as a tray for draining coolant and collecting chips generated during cutting. A cast iron work table with a swiveling arm and a control panel on a separate arm are mounted to the base. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed is provided by the downward movement of the arm. The feed speed (cutting speed) is adjustable via a hydraulic cylinder. Feed speed is adjustable from the machine's control panel. There are two selectable blade speeds: 35 and 70 m/min. After the cut is completed (when the arm reaches the lower position), the blade drive is automatically switched off. Safety is ensured by blade guards and micro-switches that cut off power to the motor at the end of the cycle or upon opening any of the covers. Additional protection includes automatic machine shutdown in the event the blade breaks. Technical Specifications: - Blade size [mm]: 2520 x 27 x 0.9 - Blade tension: Mechanical (manual) - Blade speeds [m/min]: 35, 70 - Arm descent: Stepless – hydraulic cylinder - Vise base height [mm]: 860 - Saw wheel diameter [mm]: 300 Gujdpfxsudi Uzs Afwob - Saw frame swivel range [°]: 0–60 - Power supply: 3 phase, 400V - Main motor power [kW]: 1.1 / 1.5 - Coolant pump motor power [kW]: 0.05 - Dimensions with base [cm]: 150 x 80 x 140 - Weight [kg]: gross/net – 210 / 180 kg Included in delivery: - 2 x M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Stanje: novo, Leto izdelave: 2026, CORMAK HBS320 for double-sided miter cutting in the range from -45° to +60°. The machine’s design is based on solutions and projects developed by Polish engineers. Its precision and quality place it at the forefront of band saws, capable of cutting materials up to 320 mm in width. A key advantage of the machine is the latest-generation hydraulic cylinder. The machine features a reinforced vice base and a quick-clamping vice. Machine Features The CORMAK HBS320 metal band saw enables cutting material at any angle between -45° and +60°. Workpieces can be fed manually or by any feeding device. The feed during cutting is gravity-based, utilizing oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After the cutting cycle is completed, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a very robust, single-piece grey cast iron casting. Combined with a 27 mm wide saw blade, it is perfectly suited for serial cutting of structural, stainless, and tool steels. The vice is mounted on an adjustable bed and features quick-release clamping. The blade guides are equipped with ball bearings and carbide inserts, ensuring excellent precision and straightness of the cut. This has a significant impact on band guidance, blade longevity, and cutting quality. The carbide guides greatly reduce wear on both the machine and the blade. The base is a rigid body constructed from welded steel sheets. Inside, there is a separate coolant tank with an electric pump. The top of the base is designed as a tray to collect coolant and chips generated during material cutting. A cast iron worktable with a double-sided pivoting arm and control panel is mounted to the base. Feed rate is adjusted from the control panel. Two blade speeds are available: 44 and 88 m/min. When the saw arm is in the lower position (after the cut), the blade drive automatically switches off. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle is complete or any guard is opened. An additional safety feature is automatic shut-off in the event of blade breakage. Technical Data Ø MAX - 260 mm (straight cut) H x W MAX - 320 x 160 mm (straight cut) POWER SUPPLY - 3 phase 400V TOTAL POWER - 1.5 kW ARM DESCENT CONTROL - hydraulic cylinder BLADE LENGTH - 2740 x 27 x 0.9 mm BLADE SPEED - 44 / 88 m/min VICE BASE HEIGHT - 920 mm DIMENSIONS - 1400 x 880 x 1550 mm WEIGHT - 280 kg Cutting Parameters Angle 0º -----ø260 320 x 160 255 x 255 Godpfxoi D Dgwj Afwoub 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 Price stated is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: novo, Leto izdelave: 2026, PREMIUM SERIES MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION ACCURACY, OPERATING IN FULL INTERPOLATION ON EACH AXIS X, Y, Z. Digital Signal Processing. The plotter with a working area of 1220x1230 ensures smooth operation and high accuracy during machining. The built-in memory in the controller allows the machine to work without having to reload the program each time. The spindle construction uses high-quality machine bearings, ensuring very quiet operation and increased durability. Training at the CORMAK headquarters included with each machine. Technical Specifications Spindle: 3.7 kW / 18,000 rpm, inverter-controlled, air cooled Working area: 1200x1200x210 mm Control: DSP Software resolution: 0.001 mm Power supply: 400V Weight: 450 kg Machine dimensions: 2000x1800x1640 mm Table height: 715 mm Guides: linear Drive transmission: rack and pinion (Z-axis - ball screw) Software: UCanCAM V13 Polish language version (optional) NOTE! The machine is equipped with a function to remember the last G-code path. In case of failure or power interruption, it resumes operation from the last point without loss of time or material. CNC Milling Machine CORMAK C1212 PREMIUM (1200x1200) Standard Equipment: - leveling feet - bolts - keys - set of training milling cutters - ER32 collets – 1/8”, 1/2”, and 5-6 mm Unloading and installation of the machine are the responsibility of the customer. Power plug on the customer side due to various 16A / 32A sockets. OPTIONAL EQUIPMENT: NET PRICE UCanCAM V13 Polish language version software 1,190.00 PLN UCanCAM V13 PRO Polish language version software 3,190.00 PLN Startup and training at customer site 3,000.00 PLN CE-compliant safety barriers (price per side) 600.00 PLN CE-compliant laser safety curtains 6,300.00 PLN Warranty extension by 12 months – extra 15% of net device price Gsdsycuycopfx Afwjub Warranty extension by 24 months – extra 30% of net device price Warranty extension by 36 months – extra 45% of net device price

Stanje: novo, Electrostatic air filter for ventilation systems – central extraction ELBARON - RON 15 S oGk – 15,000 m³/h – 230 V – without fan Maximum air flow: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Guodpfxeh Rfccs Afweb Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltages and special colours available on request Application: The ELBARON duct air filter series is designed for central air filtration in production halls as well as building and plant engineering. Your benefits: - 15 model variants available - Direct from the manufacturer - High separation efficiency - Modular extension possible - Easy maintenance - Low follow-up costs due to reusable filter media - Available in simplex (single-stage) or duplex (two-stage) configurations - Wide range of air flow rates available - Also available in mirrored configuration - Robust construction - Quality made in Germany Based on our proven filter technology developed over many years, this filter unit can be used as a central air filtration system in ventilation ducts. The ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air, ensuring effective air purification in your production area. Our air filter can also be easily integrated into central extraction systems for machine exhaust. With ELBARON filter units, downstream heat exchangers or air-conditioning units are protected from premature contamination. The ELBARON filter technology is based on environmentally-friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large-scale production facilities, thanks to their high separation efficiency, large capacity, and ease of maintenance. Take advantage of the enormous potential of ELBARON duct air filters with minimal maintenance costs. All our electrostatic filter cells and filter media can be easily cleaned and reused.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, dolžina brušenja: 1.600 mm, širina brušenja: 630 mm, Ravnalni brusilni stroj 1600 x 630 M7163x16100, dimenzije magnetne mize: 1600 x 630 mm, dolžina stroja: 5400 mm, globina: 2500 mm, višina: 2600 mm. Avtomatski pomiki v oseh X in Y. Smo prvi lastnik, stroj je bil v uporabi povprečno nekaj deset ur mesečno – zgolj za servisne namene brušenja. Leto izdelave: 2008. Moč: 22 kW, 60A. Gsdpfx Aey Shzaofwjub

Stanje: novo, Na prodaj profesionalna, elektronska obtočna črpalka Wilo Stratos 50/1-9 – visoko učinkovita, energetsko varčna, namenjena za ogrevalne in hladilne sisteme. Tehnični podatki Proizvajalec: Wilo Model: Stratos 50/1-9 Napajanje: 1~ 230 V, 50/60 Hz Moč: 25–490 W Tok: 0,20–2,15 A Priključek: DN50 (2”) Priključek: prirobnični Delovni tlak: PN6 / PN10 Stopnja zaščite: IPX4D Maks. temperatura medija: do 110°C Kazalnik energetske učinkovitosti: EEI ≤ 0,20 (ErP) Leto izdelave: 2015 Proizvedeno v Nemčiji Stanje Tehnično brezhibna Zelo dobro vizualno stanje Točno takšno stanje kot na slikah Uporaba Gjdpfeyhhn Djx Afweub ogrevalni sistemi hladilni sistemi industrijske in poslovne stavbe 📦 Možna dostava ali osebni prevzem 🧾 Račun 🌍 Prodaja tudi za izvoz

Stanje: pripravljen za uporabo (rabljen), Baldor BSC1105-24 servo pogon, VNOS 3AC230V, ID/Št.: 20405C, serijska številka: 1995MG27553, rabljen, dobro ohranjen, 100% delujoč, dobava skladno s fotografijami. Gjdpfey Npzpsx Afwsub

Stanje: pripravljen za uporabo (rabljen), Baldor BSC1105-24 servopogon VHOD 3AC230V ID/št.: 20405C SN: BEDBB32950, rabljen, ohranjen kot nov, 100% delujoč, obseg dobave po slikah. Guedpfsy Npziox Afwjb

Stanje: pripravljen za uporabo (rabljen), Baldor BSC1105-24 servo pogon VHOD 3AC230V ID/št.: 20405C Serijska številka: BEGRS039604, rabljen, dobro ohranjen, 100% delujoč, dobava v skladu s fotografijami. Guodpfey Npz Aex Afwsb

Stanje: pripravljen za uporabo (rabljen), Baldor BSC1105-24 servopogon VHOD 3AC230V ID/Št.: 20405C SN: 1995MG27554, rabljen, dobro ohranjen, 100% delujoč, dobava v skladu s fotografijami. Guodpfsy Npzvox Afweb

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7854 Tehnični podatki: Godpsy Rr T Rofx Afwoub - dolžina traku 2515x152mm - širina traku 150mm - oscilacija - navpično gibanje oscilacije - dolžina brušenja 790mm - dimenzija mize 840x300mm - delovna miza za ukrivljene elemente 300x250mm - nastavitev delovne mize 80mm - motor 2,2kW - brusilni agregat nastavljiv pod kotom 90-45 stopinj - nastavitev brusilne glave 0-45 stopinj - premer odsesa 100mm - dimenzije d/š/v 1450/600/1230mm - teža 138kg PREDNOSTI – z oscilacijo – s čevljem – za brušenje krivuljnih in ravnih elementov – agregat z možnostjo dela v navpičnem in vodoravnem položaju – nebarvana – rabljeni brusilnik, v zelo dobrem stanju Cena brez DDV: 3900 PLN Cena brez DDV: 930 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo pri večjih nihanjih)

Stanje: novo, Leto izdelave: 2026, The series of heavy-duty CNC lathes ensures efficient cutting performance with high precision. Our CNC Lathe 800X3000 is more than just a tool—it’s a reliable partner for both experienced professionals and those just starting their journey in manufacturing. Its power and stability, reinforced by wide guideways, make it an indispensable solution for even the most demanding metalworking projects. The CNC Lathe 800x3000 is a professional numerically controlled machine designed for precise metal machining in demanding industrial applications. Featuring a robust construction and advanced control systems, it guarantees reliability and high productivity in both batch and single-unit production. The Siemens Sinumerik 808D is a cost-effective CNC control system, dedicated to entry-level lathes and milling machines—ideal for small and medium-sized operations. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming, reducing operator training time to a minimum. High reliability: Durable design, resistant to dust and humidity, ensuring stability in tough workshop conditions. Compatibility: Designed for machines with standard requirements and easy integration with SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for novice CNC users. Technical Specifications of the CNC Lathe 800x3000: CENTER DISTANCE: 3000 mm MAXIMUM TURNING DIAMETER: 800 mm MAXIMUM TURNING DIAMETER OVER CROSS SLIDE: 520 mm BED WIDTH: 600 mm SPINDLE BORE: 104 mm (option 130 mm) SPINDLE SPEED: 22–108, 60–300, 240–1200 rpm MAX. X/Z AXIS TRAVEL: 420/1350, 2850 mm FAST TRAVERSE FEED X/Z: 4/8 m/min POSITIONING ACCURACY: 0.03/0.04 mm REPEATABILITY X/Z: 0.012/0.02; 0.025 mm TAILSTOCK SLEEVE DIAMETER: 100 mm MAX. TAILSTOCK SLEEVE TRAVEL: 250 mm TAILSTOCK SLEEVE SOCKET: MK5 TOOL POSITIONS: 8 TOOL SIZE: 32x32 mm MAXIMUM LOAD CAPACITY: 1700 kg MOTOR POWER: 15 kW WEIGHT: 8700 kg DIMENSIONS: 5200 x 2540 x 1860 mm Godpfx Afjycrz Rsweub Standard Equipment: Full working area enclosure 4-position tool post 3-jaw chuck, 320 mm Manual chuck + tailstock FANUC or Siemens control Coolant system Lighting

Stanje: novo, Leto izdelave: 2026, Efficient flat-bed lathe with versatile applications, dedicated for both series and single-piece production. The rigid lathe structure and massive, hardened and ground guideways ensure stability, machining accuracy, and high repeatability when processing large workpieces. Technical specifications: - TURNING DIAMETER OVER BED: 560 mm - TURNING DIAMETER OVER SLIDE: 340 mm - MAXIMUM WORKPIECE LENGTH: 1500 mm - SPINDLE SPEED: 100–800 rpm - SPINDLE BORE: 90 mm - BED WIDTH: 430 mm - SPINDLE NOSE: A2-11 - NUMBER OF TOOLS: 8 - TOOL SIZE: 25x25 mm - TAILSTOCK TAPER: MT 5 - MAX. TAILSTOCK TRAVEL: 150 mm - MOTOR POWER: 11 kW - DIMENSIONS: 3770x1500x1900 mm - NET WEIGHT: 4150 kg Available equipment: - SINUMERIK 808D CNC control - SIEMENS servo drives - Hydraulic 3-jaw chuck - 8-position turret head - Set of soft jaws - Hydraulic tailstock - Coolant system - Automatic lubrication system for gears and guideways - 24V halogen lighting - User manual in Polish and English - CE Declaration The listed price is NET, exclusive of transport costs. Gujdpfx Aei Apf Tjfwsb For more information, please contact us by phone or email. We invite you to visit our website for a full offer overview.

Stanje: novo, Leto izdelave: 2025, Efficient flat bed lathe with a wide range of applications for series and small batch machining. The machine is equipped with functions for turning external, internal, and spherical surfaces, as well as threading. Control includes standard cycles for cross, conventional, and taper turning, threading, grooving, and contouring, significantly simplifying programming and shortening machining times. Technical specifications: - Max. turning diameter over bed: Φ400 mm - Max. turning diameter over carriage: Φ210 mm - Distance between centers: 1000 mm Gusdpfx Aoiz S S Uefweb - Spindle speed range: 0-2000 rpm - Spindle bore: Φ75 mm - Spindle bore taper: MT6 - Number of tool post positions: 8 - Max. tool post size: 25x25 mm - Min. setting unit (X, Z axes): 0.001 mm; 0.001 mm - X-axis rapid traverse speed (longitudinal): 8 m/min - Z-axis rapid traverse speed (cross): 10 m/min - Tailstock quill taper: MT4 - Max. tailstock quill travel: 120 mm - Main motor power: 7.5 kW - (X) feed motor torque: 6 Nm - (Z) feed motor torque: 6 Nm - Packaging dimensions (mm): 2640 x 1500 x 1766 mm - Net weight: 1800 kg Available equipment: • SINUMERIK 808D CNC control in Polish • SIEMENS servo drives • Hydraulic chuck • 8-position tool post • Set of soft jaws • Hydraulic tailstock • Cooling system • Automatic lubrication system for gears and guideways • 24V halogen lighting • User manual in Polish • CE declaration of conformity The listed price is NET. Price does not include transport costs. For more information, please contact us by phone or email. We invite you to explore our offer on our website.

Stanje: novo, Leto izdelave: 2026, Technical specifications SWING OVER BED: 360 mm SWING OVER CROSS SLIDE: 150 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100–2000 rpm SPINDLE BORE: 51 mm SPINDLE NOSE: MT5 NUMBER OF TOOLS: 8 TOOL SIZE: 20 x 20 mm TAILSTOCK QUILL: MT3 MAX. TAILSTOCK TRAVEL: 100 mm MOTOR POWER: 5.5 kW DIMENSIONS: 1815 x 1300 x 1600 mm NET WEIGHT: 1300 kg Available equipment: - SINUMERIK 808D control panel in Polish language - SIEMENS servo drives - 1 driven tool - 3-jaw hydraulic lathe chuck - 8-position turret head - Set of soft jaws - Hydraulic tailstock - Coolant system - Automatic lubrication system for gears and guides - 24V halogen lighting - Technical documentation in Polish - CE declaration The listed price is NET. Price does not include transport costs. Guodpfxoizw E Aj Afwob For further information, please contact us by phone or email. We invite you to review our offer on our website.

Stanje: novo, Leto izdelave: 2026, The lathe is perfectly suited for efficient and precise machining of metal parts as well as other materials. The machine features functions for machining internal and external cylindrical, face, conical, semicircular surfaces, and threading. The bed is a sturdy cast iron structure, resistant to vibrations. The guideways are induction-hardened and ground. Technical Data: Gjdsi Apg Ujpfx Afweub TURNING DIAMETER OVER BED: 320 mm TURNING DIAMETER OVER CROSS SLIDE: 160 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100-2500 rpm SPINDLE BORE: 46 mm SPINDLE MOUNT: MT5 NUMBER OF TOOLS: 6 TOOL SIZE: 16x16 mm MAXIMUM DIAMETER OF BAR THROUGH SPINDLE: 44 mm TAILSTOCK MOUNT: MT3 MAXIMUM TAILSTOCK QUILL TRAVEL: 100 mm MOTOR POWER: 3 kW DIMENSIONS: 2370 x 1420 x 2000 mm NET WEIGHT: 950/1300 kg Available Equipment: SINUMERIK 808D control in Polish SIEMENS servo drives 3-jaw hydraulic lathe chuck 6-position turret head Set of soft jaws Hydraulic tailstock Cooling system Automatic lubrication system for gearbox and guideways 24V halogen lighting Technical documentation (DTR) in Polish CE declaration The listed price is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to visit our website for our full offer.

Stanje: novo, Leto izdelave: 2026, Naprava je namenjena hlajenju cevi v CO2 laserskih rezalnikih z uporabo hladilne enote. Hladilnik CW3000 ohranja temperaturo vode na ustrezni ravni. Zaradi takšnega hlajenja ima cev stabilne delovne parametre. Guedjy Sg H Ispfx Afweb CO2 hladilnik zagotavlja optimalne pogoje dela za cev, učinkovito jo ščiti pred pregrevanjem in poškodbami. Naprava je namenjena posameznikom ali podjetjem, kjer je laserski rezalnik dnevno delovno orodje. Tehnične specifikacije: Napajanje: 230V Poraba toka: 0,45A Hladilna zmogljivost: 50 W/°C Prostornina rezervoarja: 9 L Priključki (vhod/izhod): 10 mm Največja višina delovanja: 10 m Največji pretok: 10L/min Teža: 9,5 kg Dimenzije (D x Š x V): 49 x 27 x 38 cm Varnostne funkcije: - Zaščita proti prenapetosti kompresorja - Alarm nepravilnega pretoka vode v sistemu - Alarm prekoračitve pravilne temperature Naveden cenik je NETO in ne vključuje stroškov prevoza.