CNC stružnica

CORMAK CNC CKT 400x1000 Hydraulic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Machining center Manufacturer: KNUTH Ncodpotiauhsfx Ah Ust Model: EcoMill 350 CNC

Stanje: rabljeno, Leto izdelave: 2019, Overview The fill level inspection system was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Njdpfx Ahjl Hxnie Usct Technical details: - Capacity: 50,000 bph - Inspection via gamma ray - Krones Checkmat with discharge table and pusher

Leto izdelave: 2020, stanje: novo, 1000 l/h Stainless steel frame on 4 adjustable feet Minimum/maximum level sensor in the pressure tank Stainless steel pressure vessel The product is pushed into the tank via a multi-nozzle head; Product pump: Non-return valve at the product inlet Sight glass at the product inlet CO2 pressure regulating valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. pressure: 6 bar incl. electronic control Ncsdpfx Aecx Smbeh Uet incl. pressure boosting pump

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake Njdpfx Asd H Hhzoh Uoct - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.050 mm, pomik osi Y: 520 mm, pomik po osi Z: 520 mm, največja hitrost vrtenja: 12.000 obr/min, CNC control Heidenhain TNC 430 32-station tool changer Coolant system Nsdpfsu Hf Rysx Ah Uoct 2x chip conveyors Probe system The total X-axis travel is 2050mm, which means you can mill around 2 meters in one operation. A partition wall is also included. When the partition wall is installed, the X-travel is divided accordingly. Technical data / technical details: X-travel 2050 mm Y-travel 520 mm Z-travel 520 mm Spindle taper SK40 Spindle speed range 12000 rpm Number of tool stations in changer 2x 32 Spindle drive power 36 kW Weight approx. 12800 kg Technical data, accessories and machine descriptions are not binding.

Leto izdelave: 2026, stanje: novo, številka stroja/vozila: 1234, Designed to collect mash before the packaging process. With the buffer option, the entire system can operate continuously and independently from the packaging machine, without interruption. - Capacity: 600 L - Material: Stainless steel, grade Wnr. 1.4301, AISI 304 Nedpfeiu Hy Tsx Ah Ujct - Weight: 80 kg - Equipped with a floating lid - Level indicator included Dimensions: D – Diameter: 565 mm H – Overall height: 1095 mm h1 – Tank height without legs: 845 mm h2 – Leg height: 250 mm

Stanje: novo, Swing diameter: 400 mm Turning length: 1,000 mm Speed range: 70 – 2,000 rpm Weight approx.: 500 kg Description: - Lead- and feed-screw lathe features a robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing achieved through heavily ribbed GG cast iron - Hardened and ground face spindle ensures high accuracy and durability - High material removal rates during rough machining enable production of fine surfaces and tight tolerances - Wide range of threads and feeds without requiring a gear change in the change gear compartment - Bed guideways hardened and precision-ground - Perfectly running main spindle mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic brake for the main spindle - All controls (electrical) are centrally accessible - 4-position longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA 21 - User-friendly membrane keypad, splash-proof, sealed, and anti-glare - Increased working accuracy - Reduced error rate - X, Y, Z0, and Z-axes each with 8-digit display - Glass scales Equipment details: Feed gearbox – All gears made of steel, hardened and ground - Shafts run on needle bearings - All components lubricated in an oil bath Apron – Housing fully sealed - Safety feature to prevent simultaneous operation of threading and feed mechanism Tailstock – Hardened and ground quill, generously dimensioned, quill with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Full illumination of the work area Main spindle – Perfectly concentric running, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Operator panel – User-friendly membrane keypad Nedpsd Eaukofx Ah Uect - Machine lamp - Coolant pump - Direct drive - Two-speed motor control - Emergency stop button Coolant tank – Removable, level indicator, easy and complete draining/cleaning Control cabinet – Clearly arranged, 24V DC power supply, all contactors and relays from Schneider or Siemens Chip tray – Hinged, easy chip cleaning Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6 to MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phase(s): 3-phase Current type: AC Network frequency: 50 Hz Spindle mounting: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation: Centre height: 200 mm Distance between centres: 1,000 mm Swing over bed: 400 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 50 obr/min, For sale is a machining center from Deckel Maho, model DMU 50 M, with path control and manual rotary axes. The machine is in very good condition, fully functional, and ready for immediate use. A special feature is the ability to operate in an open enclosure. Technical specifications: Year of manufacture: 2002 Control: Heidenhain TNC 124 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Feed rate: 5,000 mm/min Ncsdju Unh Ijpfx Ah Uet Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360° (mechanical) Swivel range: +90/ -15° (mechanical) Max. load: 200 kg Required space: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm Weight: 2,600 kg Additional tool holders available upon request. Transport and loading can be organized across Europe for an additional charge upon request. Prices plus VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Leto izdelave: 2006, stanje: rabljeno, NNP Nsdpfx Ahsb Ua Eyo Usct Masina za pripravo hrane Nerjavna naprava s nastavki za rezanje/narezovanje in ribanje, idealna za sir, zelenjavo ipd. Priložena mreža 12x12, 8x8.

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Ncjdpswwlt Refx Ah Ujt Coolant system *