Bernardo Stroj Za Odstranjevanje Napak nakup rabljenega (102.876)

Stanje: rabljeno, Leto izdelave: 2008, Working Width / mm Workpiece Height / mm Workpiece Thickness: 1-70 mm Minimum Workpiece Length: 350 mm Minimum Workpiece Length with Magnetic or Vacuum Conveyor: 80 mm Band Filter Unit Volume Ab=900 approx. 350 l Band Filter Unit Volume Ab=1400 approx. 400 l Constant Working Height 1000 mm Feed Speed 2/4 m/min Feed Speed, stepless adjustment: 1.5-8 m/min Operating Voltage 400 VAC Control Voltage 24 V DC, 230 VAC Frequency 50 Hz Compressed Air Connection R 3/8" Minimum Compressed Air Pressure 5 bar Gksdpfjinwwzex Abrsc Minimum Compressed Air Volume EMSN II +2F 10 NI/min Minimum Compressed Air Volume EMSN II /L +2F 80 NI/min Total Electrical Connection See Layout Plan Machine Weight, Working Width 900 mm approx. 4200 kg Machine Weight, Working Width 1400 mm approx. 5100 kg Machine Weight, Working Width 1540 mm approx. 5600 kg Abrasive Belt Dimensions, Sanding Drum AB=900: 1540 mm length x 900 mm width Abrasive Belt Dimensions, Sanding Drum AB=1400: 1540 mm length x 1400 mm width Abrasive Belt Dimensions, Sanding Drum AB=1540: 1540 mm length x 1540 mm width 5. Technical Description The machine operates using a wet grinding process and may only be used with a suitable grinding emulsion. A band filter system is responsible for filtering grinding dust out of the emulsion. The machine is equipped with an elastic grinding drum, which is used for regrinding and burr removal. Two counter-rotating flap brush rollers or, alternatively, stainless steel brush rollers are then used for edge rounding. Two subsequent spring steel brushes are used to remove oxide layers from the cut surfaces. Within the machine, pressure rollers hold the workpieces down on the continuous conveyor belt to ensure they remain in position during the grinding process, which determines the minimum workpiece length of 350 mm. At the machine's outlet, there is an integrated drying unit that dries the workpieces before they exit the machine. The machine is fitted with a continuous conveyor belt for workpiece transport. Special configurations may include an integrated vacuum extraction unit or magnetic conveyor, making it possible to process smaller workpieces. For non-magnetic small parts, a minimum length of 80 mm with a minimum area of 200 cm², and for magnetic small parts, a minimum length of 80 mm with a minimum area of 40 cm² is required. All grinding and brush elements are equipped with spray tube nozzles, which continuously spray the tools with emulsion, enabling the processing of aluminum and its alloys. The grinding residue is carried by the emulsion to the band filter unit and captured by an appropriate filter fleece. ERNST Automatic Sheet Metal Deburring Machine with Wet Grinding System Type EM 5 N/II/L + 2 F 1400 Year of Manufacture 2008 Factory No. 780063 Machine/Equipment: Sheet metal deburring machine with wet grinding system for stamped, laser-cut, and nibble parts of various materials, featuring a flexible sanding drum and two flap brushes for especially high edge rounding.

Leto izdelave: 2013, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, PiGo, stroj za odstranjevanje pešk iz sadja – češnje in slive + orodja za odstranjevanje pešk iz češenj in sliv Proizvajalec: PiGo (Italija) Vrsta: Industrijski stroji za odstranjevanje pešk iz sadja Količina: 1 kos Stanje: Popolnoma obnovljen – pripravljen za proizvodnjo Material: Nerjavno jeklo (INOX) Godpfx Aeynwzmebrjkc Transportni trak za dovajanje sadja na platformi Popravilo in servis Stroji so bili podvrženi popolnemu splošnemu popravilu: ✔ Nameščene so nove verige ✔ Nameščene so nove plošče in igle ✔ Servirane so bile menjalnike ✔ Zamenjani so bili ležaji ✔ Zamenjano olje ✔ Testirano in pripravljeno za takojšnjo uporabo Priloženi kompleti orodij (na stroj) Češnje: 22,24,26 mm Slive: 37/20 mm 42/20 mm Prednosti Industrijska zmogljivost obdelave Robusten stroj z visoko zmogljivostjo Konstrukcija iz nerjavečega jekla Pogoji prodaje Možna je garancija Možen pregled na zahtevo Lokacija: Hrvaška (EU) *več slik in videoposnetkov na zahtevo

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Rated power: 8 kW, weight: 2.2 t, with control cabinet. Godoilht Ujpfx Abrskc

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Working height: adjustable from 0.5 mm to 150 mm Working width: 1150 mm Gjdpfxem Nlm Dj Abrokc Maximum part weight: 300 kg Wide belt with abrasive belt length: 2200 mm Supplied as standard with vacuum holding system, optionally with magnetic holding system Thanks to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal processing units and one additional external processing unit. Please contact us for further information and images via email (at) or

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Gedpfx Aom Rpy Robrokc Maximum part weight: 400 kg Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optional with magnetic holding system The use of 2620 mm long abrasive belts provides a consistently smooth surface and reduces consumable costs, as the belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's processing task. The machine structure can accommodate up to 3 internal processing units and an additional external processing unit. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for further information and photos via mail(at) or

Leto izdelave: 2026, stanje: novo, Working width: 1000 mm Workpiece thickness - max.: 0.5 - 50 mm Abrasive belt width: -- mm Machine weight: approx. 2.5 t With the SBM-L 1000 G1S2, operating in dry mode, steel, stainless steel, and aluminum can be processed in alternating operation. It deburrs and rounds the edges of the external and internal contours of stamped, laser-, fine plasma-, or waterjet-cut workpieces with a thickness of up to 50 mm on both sides in just one pass. * Two grinding units, one each on the top and bottom, remove spatter and light burrs on outer and inner edges of sheet metal parts. * In total, four sanding belts—two on the top and two on the bottom—process the sheets simultaneously on both sides. All edges are deburred or rounded, depending on the tool settings. * Double-sided processing eliminates the need for time-consuming flipping of the workpieces and reworking. * Each pair of units can be switched on/off and adjusted individually according to the application. * Including Siemens S7 control system: - Easy and convenient operation via an intuitive user interface - High operational security with 3 password-protected user levels - Integrated program memory - USB / RJ45 interface for data exchange or external components (e.g., barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to the preselected material thickness - Standby position for deactivated units - Service-friendly (e.g. plain text error messages) Comprising: - SBM-L 1000 G1S2 grinding machine (kit) - 4 x SBM 1000 grinding belts with rib P60 SiC - SBM-L 1000 sanding belt L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - Dry dust extractor DDE 3002 - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Detailed technical data available on request. The machine is available ex stock Niederlangen for immediate delivery. Gedpjuia Dqsfx Abrjkc

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Gksdjnah Taepfx Abrsc This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Gkodpfx Absnah Tdoroc Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Please contact us for further information and images via email (at) or *

Stanje: dober (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 2.309.044, Offer 23195 Precision Deburring and Chamfer Milling Machine / Edge Milling Machine Technical specifications: Gksdpfxonvdtco Abrjc - Suitable for processing steel, stainless steel, aluminium, and plastics - Deburring and chamfering process performed with milling cutter - Chamfer angle: 45° - Chamfer width: steplessly adjustable - Guide rail length: 500 mm - Working height: 750 mm - Spindle speed: 2750 rpm - Drive: 400 V / 0.7 kW - Required floor space: approx. W 500 x D 400 x H 850 mm - Weight: approx. 30 kg

Stanje: novo, Premer 150 mm Dolžina obdelovanca 1300 mm Širina obdelovanca 800 mm Premer brusilnega krožnika, maks. 150 mm Glava, vrtljiva +/- 180° Višina delovne površine 945 mm Območje hitrosti vrtenja 0 – 1400 vrt/min Moč motorja 1,5 kW Masa stroja približno 230 kg Potreben prostor približno 1435 x 1100 x 1510 mm Gksdpfjxab Hpsx Abrec "Easy T" je cenovno ugodna različica običajnih strojev za brušenje in odrezovanje robov. Njegova glava, ki jo sestavljajo brusilni krožnik in lamelna krtača, je vrtljiva za 180°. To omogoča hitro menjavo med posameznimi deli. Zahvaljujoč roki, ki je podprta z utežjo, se lahko glava enostavno premika nad obdelovancem. Rezultat je enakomerno zaobljeni rob. Podlaga preprečuje drsenje tudi najmanjših komponent. Oprema: - Odrezovanje in zaobljanje robov lasersko izrezanih ali iztisnjenih pločevin - Brusilna glava, sestavljena iz brusilnega krožnika in lamelne krtače - Brusilne glave je mogoče vrteti za 180° - Delovna površina 800 x 1300 mm - Roka, podprta z utežjo, za enostavno vrtenje - Nedrseča podlaga mize - Ergonomično upravljanje stroja s pomočjo gumbov "vklop/izklop" - Brusilna glava z brezstopenjsko regulacijo hitrosti vrtenja preko frekvenčnega pretvornika - Ročaj za ergonomično rokovanje

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: 810591Q, moč: 4 kW (5,44 KM), višina obdelovanca (maks.): 45 mm, TEHNIČNE PODROBNOSTI Največja debelina obdelovanca: 45 mm Najmanjša višina plošče: 10 mm Največja višina plošče: 45 mm Agregat za obdelavo robov: 1 PODROBNOSTI O STROJU Nameščena skupna moč: 4 kW Gsdpfx Abjz Ekbwsrjkc OPREMA Skladnost s standardom CE Rezervoar za lepilo: Za taljeno lepilo Stroj se prodaja in dobavlja v trenutnem in pravnem stanju („kot je, brez kakršnih koli garancij“) na podlagi fotodokumentacije in tehnične/komercialne dokumentacije z opisnim značajem. Kupec ima pravico pregledati blago pred prevzemom in prevzema odgovornost za namestitev, pritrditev in uporabo stroja na ciljnem mestu. Zunanja referenca: 7247

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Gjdpfx Aet Hw Iijbrskc Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: novo, Širina obdelovanca maks. 145 x 150 mm Hitrost traku 1,0 - 8,0 m/min Višina obdelovanca maks. 100 mm Skupna poraba moči približno 5,5 kW Teža stroja približno 900 kg Potreben prostor približno 1560 x 870 x 1920 mm Širokopasovni brusilni stroj za odrezovanje + zaobljanje robov laserjsko izrezanih delov – vključno z vakuumsko podporno mizo Opis + tehnični podatki: - Delovna širina: 150 mm - Največja višina obdelovanca: 100 mm - Največja nastavitev višine: 100 mm - Celotna obdelava v enem koraku - 1 x brusilni disk - 2 x krožne krtače Gkodezwxy Iopfx Abrjc - Pritiskovalni valji pred in za vsako glavo - Nastavljiva hitrost podajanja - Fiksna miza, konstantna višina podajanja - Vakuumna miza - Pritisk krtač in brusilnega diska je nastavljiv brez odpiranja pokrova VKLJUČENO: DD-ENOTA: BRUSILNI DISK ZA ODREZAVANJE - Delovna širina: 150 mm - Moč motorja: 1,1 kW - Premer brusilnega diska: 250 mm VKLJUČENO: 2PTB-ENOTA: KROŽNE KRTAČE ZA ZAOBЉANJE ROBOV - Enota za zaobljanje robov laserjsko izrezanih delov - Nastavljiva hitrost krožnih krtač - 1 x krtača se vrti v smeri urinega kazalca - 1 x krtača se vrti v nasprotni smeri urinega kazalca - Premer krtače: 250 mm - Moč motorja: 2 x 1,1 kW VKLJUČENO TRANSPORTNI TRAK - Transportni trak je izdelan iz sintetične gume - Trak ima visoko adhezijo, da drži dele - Transportni trak je odporen na olje in iskre - Hitrost transporta: 1-8 m/min VKLJUČENO VAKUUUMSka MIZA ZA PRIDRŽEVANJE MAJHNIH DELOV - Serijsko vgrajena - Moč vakuumskega motorja: 2,2 kW - Najmanjša dimenzija obdelovanca: 25 x 25 mm - Največja dimenzija obdelovanca: 145 x 150 mm SPLOŠNO: - Mehanski prikaz debeline obdelovanca - Digitalni prikaz debeline materiala - Pritiskovalni valji so vzmetno nameščeni - Fiksna delovna višina

Stanje: pripravljen za uporabo (rabljen), Assfalg ASO 650 S – stroj za obdelavo robov, stroj za faziranje, stroj za odstranjevanje ostrih robov Maksimalna širina faze: 0–7 mm Nastavitev kota: 15°–45° Dimenzije: približno 400 × 500 × 300 mm Teža: približno 52 kg Polmer [mm]: 1,2 | 2 | 2,5 | 3 | 4 | 6 Z veseljem vas pričakujemo na ogledu. Z veseljem vam lahko uredimo cenovno ugoden prevoz! Dobili boste ustrezno račun. Gkjdpezy E D Sjfx Abrec Za tuje stranke je možen tudi račun brez davka. Pogoj je veljavna številka za identifikacijo za DDV. Pridržujemo si pravico do medprodaje. Obiščite našo spletno trgovino in si oglejte tudi naše druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in se uporabljajo samo za identifikacijo in opis izdelkov. Odstopanja od tehničnih podatkov ter napake v opisu izdelka so možne in jih pridržujemo.

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Gkodowiqukspfx Abrjc Sheet thickness range – structural steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Extraction connection: Ø 120 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine made of stress-relieved steel-welded construction for a stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta starting of main motors * Analog ammeters for each group * Digital display for sheet thickness with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel frame, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed by frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers on front and rear tables. INCLUDES OPTIONAL TAMPICO BRUSH FOR CONVEYOR BELT CLEANING 1st WORKING UNIT – R Balanced contact roller, anti-oil and heat-resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinder for automatic positioning and lift-off in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic brake in emergency. Pneumatic tensioning system for sanding belt. Abrasive belt centering system with electronic photo sensor. Oscillation adjustment for width and time. Contact roller positioning accuracy mm +/- 0.02 Contact roller positioning speed m/s 10 Contact roller diameter mm 125 Rubber roller hardness Shore 55 Sanding belt speed m/s 3 - 18 Motor power kW 7.5 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Oscillating lateral movement of the entire group. Quick-change system for brushes. Brush diameter mm 115 Number of brushes pcs 8 Oscillation stroke mm 15 Rotational motor power kW 2.2 Speed rpm 1,000 Oscillation motor power kW 0.37 Brush linear speed m/s 10.0 Optional equipment: B group – external horizontal drum brush Ø 150 mm with Scotch Brite brush €5,150.00 with 0.3 mm wire brush €6,060.00 R GROUP – ABRASIVE BELT Motor 11 kW €740.00 X GROUP – CUP BRUSHES Motor with variable speed 5.5 kW 350/1,100 included OPTIONS: Return to Sender System (machined part output to the front) €1,770.00 Conveyor belt with vacuum system – 3.0 kW €5,150.00

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 6000 m³/h Connection for extraction: Diameter 150 mm Compressed air connection: 6 bar Length: 4200 mm Width: 2300 mm Height: 2350 mm Weight: 4200 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ABOVE * The machine is built from welded and normalized steel to ensure a stable and rigid structure. * Worktable with motorized height adjustment enabled by synchronized movement of 4 screws. * Independent motors with emergency brakes integrated within the machine frame. * Dust extraction hoods within the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal accuracy * Thickness adjustment with control (+/- 0.1) * Alarm control center for immediate visualization of emergencies and/or faults. FEED UNIT * Table constructed of a solid metal structure with a ground and wear-resistant gliding surface. * Modified structures for vacuum systems available on request * Table lifts and lowers from 780 mm to a maximum height of 950 mm above floor level. Table height adjustment motor output: 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed via inverter from 0.4 to 4.5 m/min, optional: 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides preventing the conveyor from lifting. * Rubberized pressure rollers, oil- and heat-resistant, fitted before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor Gkjdeynmw Rspfx Abrsc * Speed motor displayed on the main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT * Rectified and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing control of working position and compensation for abrasive belt wear, up to 8 mm. This system is controlled by a pneumatic cylinder which enables the group to be engaged automatically and, in the event of an emergency and/or machine stop, allows immediate withdrawal of the belt from the working area. Abrasive belts and/or Scotch-Brite can be mounted. * Pneumatic ON/OFF switch. * Roller adjustment up/down ("grain" stroke 10 mm) * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system. LED indicator for wear control. * Abrasive belt centering system with electronic photo cell indicator; amplitude and intensity of oscillation adjustable. 2ND ROTARY BRUSHING UNIT * Consisting of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 800 mm, najv. debelina pločevine: 120 mm, višina obdelovanca (maks.): 120 mm, širina brušenja: 800 mm, The grinding and deburring machine provides an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent results by rounding the edges and removing burrs, leading to a significantly improved surface quality. Gedpjulauvsfx Abrjkc Utilizing state-of-the-art technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. User-friendly operation combined with a robust design ensures seamless integration into your production processes. With our grinding and deburring machine, you not only optimize processing times but also increase the precision and durability of your products. Benefit from superior processing quality and boost your efficiency in production.

Stanje: zelo dobro (rabljeno), Gebrauchte Gecam - Euro Fintec 128 Rohrschleifmaschine / Bandschleifer / Poliermaschine zu verkaufen Godswbh Dyspfx Abrokc Fintec 128 Rohrbearbeitungsmaschine zu verkaufen Kann unter Strom mit Ihren Stahlrohren vorgeführt werden.

Leto izdelave: 1997, stanje: rabljeno, Brush Deburring Machine RSA RASAMAX MONO for brushes Ø 250 mm and approx. brush width 80 mm Speed range 1500 / 3000 rpm Operating voltage 380 Volt Total power requirement 2.0 / 3.0 kW Weight approx. 180 kg Suitable for deburring sheet metal with contours, for material thicknesses from approx. 1.0 mm to 6.0 mm. 2-step brush speed: 1500 or 3000 rpm. Gsdpfx Abeimbq Derokc The machine is located at our site in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us for further information.

Leto izdelave: 2023, stanje: novo, ! Pakkumised ainult Balti riikide (Leedu, Läti, Eesti) klientidele. - Mobiilne ja kompaktne konstruktsioon - Standardvarustuses vaakumsüsteem 2,2 kW - Lisavarustusena saadaval 2 või 4 elektromagnetiga - Varustatud kahe lihvimispeaga - Kinnituskronstein topelt kahekäe juhtimisega (CE-märgistus) - Töödeldava detaili laius: maksimaalselt 780 mm / pikkus piiramatu - Masina elektritarbimine: 400 V, 50 Hz, 10 A, 6 kW Gkedpfxeixz Hde Abroc - Mõõdud: 1435 x 1100 x 1510 mm (P x L x K)

Leto izdelave: 1979, stanje: nepreverjeno (rabljeno), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from Hurth. Gjdpfshg Nuiex Abrekc Technical Data: Manufacturer: Hurth Model: ZEA1 Year of manufacture: 1979 Adjustability of processing unit: 150 mm Tool outside diameter: 190-205 mm Workpiece outside diameter: 20-120 mm Workpiece length: 150 mm Gear width: 50 mm Beveling module: 1-4 mm Bevel width: 0.7 mm Weight: 2 t

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Ponujamo strojno opremo za odstranjevanje ostrih robov – Bütfering. Največja delovna širina: 1350 mm, podajalna hitrost: 20 m/min, stopnje obdelave: 3, 1. stopnja obdelave: brusni trak, 2. stopnja obdelave: 2 vrsti krožnih čopičev, 3. stopnja obdelave: polirni trak, minimalna in maksimalna debelina obdelovanca: 0,5 mm/100 mm, maksimalna debelina materiala: 100 mm. Vključuje poškodovan transportni trak in brusne trake. Dimenzije stroja: 2000 mm/2050 mm/3400 mm, teža: približno 6000 kg. Ogled je možen po predhodnem dogovoru. Gksdpfx Ajzl U I Debroc

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 700327527, Podrobnosti Znamka: Bühler Model: MTSD 120/120 Letnik: 2023 Serijska številka: 700327527 Izvedba: zaprta ohišje s prozornimi kontrolnimi paneli Okvir: jeklo Barva: bela/siva Stanje: rabljeno Širina sita: približno 1200 mm Dolžina sita: približno 1200 mm 2 x 0,3 kW Moč vibracije: 0,6 kW Gkjdpfx Abez Iqbisrec Vključno z magnetnim separatorjem Goudsmit Teža stroja: približno 600 kg Dimenzije: približno 160 x 356 x 145 cm Do prvega zapornika nad vgrajenim cevnim magnetom Goudsmit Cevi niso vključene.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1600mm, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 100 mm, najv. debelina jeklene pločevine: 100 mm, maks. debelina aluminijaste pločevine: 100 mm, najv. debelina bakrene pločevine: 100 mm, maks. debelina medeninaste pločevine: 100 mm, skupna dolžina: 5.000 mm, skupna širina: 2.200 mm, skupna višina: 2.600 mm, skupna masa: 8 kg, vhodna napetost: 380 V, dolžina mize: 4.300 mm, širina mize: 1.600 mm, višina obdelovanca (maks.): 100 mm, vhodna frekvenca: 50 Hz, širina obdelovanca (maks.): 1.600 mm, dolžina obdelovanca (maks.): 2.000 mm, višina mize: 1.000 mm, potrebna širina: 300 mm, vhodni tok: 70 A, Ključne prednosti ✅ Izjemno velika širina obdelave 1600 mm za serijsko proizvodnjo velikih obdelovancev ✅ Multifunkcijska naprava 3 v 1: odstranjevanje ostrih robov, faziranje in brušenje, ena naprava za več uporab ✅ Popolnoma avtomatska obdelava v enem prehodu, visoka učinkovitost in stabilna natančnost ✅ Velika prilagodljivost za različne kovinske materiale in industrijske scenarije ✅ Nastavljivi parametri za podporo prilagojenim končnim obdelavam ✅ Robustna konstrukcija, nizka stopnja okvar in odlično razmerje med ceno in zmogljivostjo Ključne zmogljivosti in funkcionalne lastnosti 1. Izjemno velika delovna širina 1600 mm za proizvodnjo v velikih količinah Naprava ima delovno širino 1600 mm, kar omogoča obdelavo velikih kovinskih pločevin in obdelovancev v enem prehodu. Primeren je za obdelavo celotne širine v neprekinjenem toku, pa tudi za serijsko obdelavo majhnih in srednje velikih delov, kar zagotavlja odlično prilagodljivost proizvodnje in visoko kompatibilnost. Optimiziran transportni sistem zagotavlja stabilen in sinhroni prenos obdelovancev po celotni širini, kar preprečuje odstopanja od položaja, nepopolno obdelavo in nestanovitno natančnost. Zmanjšuje ponavljajoče se postopke vpenjanja in pozicioniranja, skrajšuje proizvodne cikle in je popolnoma primeren za množično obdelavo velikih kovinskih komponent. 2. Popolnoma avtomatsko odstranjevanje ostrih robov (brez ostankov) Naprava je opremljena z visokimi gostotami fleksibilnih abrazivnih čopičev in večsmernimi brusnimi sestavi, kar omogoča popolno odstranjevanje ostrih robov na zgornjih in spodnjih površinah ter na robovih. Učinkovito odstranjuje trde ostre robove, odlitke, ostanke po rezanju in oksidacijske plasti, ki nastanejo pri obdelavi in stiskanju kovin. Z inteligentno nastavljivo hitrostjo in nadzorom konstantnega tlaka se sistem prilagodi različnim kovinskim materialom in različnim debelinam ostrih robov za ciljno obdelavo. Popolnoma odstrani ostre robove, ne da bi pri tem poškodoval osnovni material obdelovanca ali izvirno dimenzijsko toleranco, kar zagotavlja gladke in čiste površine, ki ustrezajo strogim industrijskim standardom za montažo in natančno proizvodnjo. Gksdpez Ii H Dsfx Abrec 3. Nastavljivo faziranje za standardizirano obdelavo robov Naprava omogoča prilagodljivo faziranje in zaobljanje robov s prosto nastavljivim kotom in velikostjo. Zagotavlja enakomerno in gladko faziranje na ravnih, ukrivljenih in nepravilnih robovih obdelovancev, kar rešuje težave neenakomernosti, nizke učinkovitosti in slabe natančnosti pri ročnem faziranju. Visoko natančna konstrukcija stroja z fiksnim kotom zagotavlja identično natančnost faziranja za vsak obdelovanec. Optimizirana obdelava robov učinkovito odstranjuje ostre robove, kar izboljšuje varnost obdelovancev, prileganje pri montaži in kakovost površine. Široko se uporablja za mehanske dele, strojno opremo, električne ohišja, avtomobilske kovinske komponente in splošne kovinske izdelke. 4. Enakomerna obdelava z brušenjem za vrhunsko kovinsko teksturo Naprava je opremljena s profesionalnim modulom za brušenje, ki ustvarja nežne, enakomerne in estetske linearne teksture na nerjavnem jeklu, ogljikovem jeklu, aluminijevi zlitini, bakru in drugih kovinskih površinah. Učinkovito odstranjuje sledove orodij, praske po brušenju, sledove oksidacije in neenakomernosti na površini. Globina brušenja in hrapavost površine sta natančno nastavljivi, kar omogoča fino brušenje v ravni liniji, mat brušenje in prilagojene površinske učinke.

Leto izdelave: 2003, stanje: rabljeno, Technical details: Workpiece length: 130 - 2000 mm Minimum diameter: Ø 10 mm Maximum diameter: Ø 60 mm Control system: Fagor 10/102 S Machine dimensions approx. LxWxH: 3.8 x 3.8 x 1.9 m Control cabinet dimensions LxWxH: 1.2 x 0.6 x 2.2 m Machine weight approx.: 4,500 kg Godpsu Ngc Njfx Abrskc CNC milling and deburring machine for both ends of tubes or round steel. - Material feed via conveyor belt, travel length approx. 3,300 mm - Brush unit type PGAS 8/100 V-HV on both sides/opposed, speed 10,000 rpm (driven by compressed air) - Milling cutter holders, both sides/opposed - Milling spindle and brush holder arranged in sequence - Operation via control panel on the control cabinet Supports: - 2 units: 1x movable, 1x fixed - Lateral adjustment of right support: length 1,725 mm manually - Working strokes: cross = 5-50 mm; longitudinal = 5-50 mm - Working spindle: max. speed 320 rpm.