Stroj za odstranjevanje napak s čopičem RSA

RSA RASAMAX MONO

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 380 mm, pomik po osi Z: 300 mm, proizvajalec krmilnikov: Fanuc 16i-M, model krmilnika: 16i-M, širina mize: 390 mm, dolžina mize: 850 mm, vrtljajska hitrost (min.): 80 obr/min, največja hitrost vrtenja: 8.000 obr/min, hitrost vretena (min.): 80 obr/min, največja hitrost vretena: 8.000 obr/min, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Pomik po osi X: 500 mm Pomik po osi Y: 380 mm Pomik po osi Z: 300 mm Velikost mize: 850 × 390 mm Krmiljenje: Fanuc 16i-M Vreteno: BT30 Obrati vretena: 80 - 8000 obr/min Čas menjave: 1,0 s Bjdpfxoyw Inqe Aqtsll Menjalnik orodij: 14 pozicij Vključeno v dobavo: 3x primež 36 nosilcev orodij Oljni filter Filtermist S800 Navodila za uporabo stroja Država izvora: Japonska Moč motorja: 3,7 kW Dimenzije stroja (D׊×V): 160 × 190 × 220 cm Teža stroja: 1900 kg

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), Višina konice: 280 mm, razdalja med konicama: 2000 mm, premer struženja nad posteljo/na vozičku: 570 mm/365 mm, vretenina odprtina: 62 mm, število vrtljajev: 2500 obr/min, maksimalna teža obdelovanca: 1000 kg, širina postelje: 360 mm. Dimenzije stroja X/Y/Z: pribl. 4000 mm/2250 mm/2000 mm, teža: pribl. 5500 kg, krmilje: Siemens. Ogled na lokaciji je možen. Bledpfx Aqoxq Eyujtol

Stanje: pripravljen za uporabo (rabljen), Na voljo je Wafios stroj za ravnanje in rezanje žice z dodanim ravnalnim modulom dolžine 1000 mm. Obseg premera žice: 1,5 mm–7 mm, obseg dolžine reza: 20 mm–3000 mm, hitrost vrtenja ravnalnega telesa: 6800 obr./min, razmak: 71/69, rezalni hod: 270/min, dimenzije stroja (X/Y/Z): cca 3300 mm / 1200 mm / 1800 mm, teža: cca 1400 kg. Ogled na lokaciji je možen. Bedpfxjyvuuze Aqtoll

Stanje: dober (rabljeno), Leto izdelave: 1983, potovalna razdalja osi X: 410 mm, pomik osi Y: 310 mm, pomik po osi Z: 400 mm, Commande : Commande de positionnement et de déplacement incl. écran HEIDENHAIN TNC 135 Commande manuelle 3 axes DONNÉES TECHNIQUES Domaine de travail Axe X (longitudinal) manuel/automatique : 410/390 mm Axe Y (transversal) manuel/automatique : 310/290 mm Axe Z (vertical) manuel/automatique : 400/380 mm Course de broche verticale : 63 mm Surface de serrage de la table angulaire : 700 x 285 mm Puissance d'entraînement (à 1500 tr/min) : 2,2 kW Plage de vitesses : 45–2000 tr/min Nombre de vitesses : 12 Pas d'étagement (progression géométrique) : 1,4 Porte-outil (DIN 2079) : ISO 40 ÉQUIPEMENT/ACCESSOIRES - Commande manuelle et par programme CNC - Usinage vertical et horizontal - Tête de fraisage verticale orientable - Tête de fraisage verticale à angle réglable - Avance manuelle de la broche verticale - Table angulaire Bsdpfx Aoht Hbueqtell - Dispositif de refroidissement - Bac à liquide de refroidissement et à copeaux - Carters de protection contre les projections de copeaux dans la zone de travail - Éléments de calage - Documentation

Stanje: novo, Mere D-Š-V 1700 x 485 x 950 mm Teža 116 kg Število predalov 6 kosov Blsdpfx Aqou Imfuetol Notranje mere zgornjega predala 1390 x 360 x 60 mm. Notranje mere drugega desnega predala 910 x 380 x 90 mm. Notranje mere drugega, tretjega in četrtega levega predala 440 x 380 x 90 mm. Notranje mere petega levega predala 440 x 380 x 210 mm. Notranje mere police za vrati 940 x 450 x 390 mm. Dimenzije koles 150 x 40 mm. Debelina delovne plošče iz masivnega lesa 40 mm. Mere pakiranja 153 x 49 x 96 cm. Teža 116 kg.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Bjdpfx Ajmhhyaoqtjll Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: rabljeno, FANUC ROBODRILL ALPHA T21 i FIa je vertikalni obdelovalni center z visoko natančnostjo, veliko preciznostjo in zanesljivostjo. Delovne zmogljivosti: miza 850 x 400 mm, največja obremenitev mize 300 kg, pomiki X700 mm, Y400 mm, Z330 mm, skupaj 5 osi, razdalja med vretenom in mizo 250–580 mm, zalogovnik orodij za 21 mest, največja teža orodja 23 kg. Glavne specifikacije: vreteno s kontinuirano regulacijo 100–24.000 obr./min, hitro pomikanje 54 m/min, moč vretena 5,5 kW, priključek 3x 400 V 50 Hz, skupna moč 11 kVA; teža stroja ~2200 kg; dimenzije D2140 x Š2000 x V2350 mm. Dosega ozke tolerance; tipično za avtomobilsko industrijo, urarstvo, strojništvo, letalstvo in medicinsko tehniko. Bledpsyxntvsfx Aqtsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 1.000 h, številka stroja/vozila: CA520SR--10691, Maks.premer cevi 20mm Bledpfx Aqsitcr Retel Min.premer cevi ----- Maks.radius krivljenja 60mm Min.radius krivljenja 16mm Maks.višina orodja ----- Min.višina orodja 30mm Delovna višina 1290mm Dolžina 1600mm Širina 910mm Višina 1520mm Teža stroja 1250kg V paketu je vključen tudi nakladalnik cevi, transportni trak in varnostna ograja.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth Blodpfxsmhh Dzs Aqtsl - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, Naprodaj upogibni stroj za cevi Schwarze-Robitec SR80 DB. Stroj iz leta 2007. V zelo dobrem stanju. Popolnoma delujoč. Opremljen z boosterjem za upogibanje brez trna. Blodpfxszd Ntxo Aqtjl