Stroj za odstranjevanje napak

LISSMAC SBM-L 1000 G1S2

Stanje: rabljeno, Leto izdelave: 2023, številka stroja/vozila: SN056444, 12 mesecev garancije. Dedpfx Absx Hua Sovoup

Stanje: novo, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital position displays Hydraulic drop end Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Dsdpjiffwqofx Abvoup Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on 250 N/mm² yield strength Material: (ST 37 - ST 42 structural steel)

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts Duodpfjd Ev Upex Abvop NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Leto izdelave: 2014, Biesse Rover B G 2231 FT, komplett mit Be- und Entladesystem Beschreibung: Arbeitsbereich X in Y: 3100 x 2205 mm Flachbett-Tisch Anzahl Achsen Fräsmotor: 3 Kein Bohraggregat Werkzeugaufnahme: HSK 63 Wechsler: Feststehend, 21 Plätze Vakuumpumpen: 2 x 300 m³ Absperrungen Office-Softwarelizenz Ein- und Auslauftisch (Beladung mittels Vakuumheber) Abkehrarm Einlaufanschlag B-Solid Presetter Dujdpfx Abew Hf A Rjvjp Detaillierte Beschreibung auf Anfrage (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer in den technischen Daten, Preisen und allen Angaben vorbehalten. Keine Garantie auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise zzgl. Inserierungskosten Machineseeker Best woodworking machines from the Netherlands Holland Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. Duodpfx Abenah Taevop The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Teža: 4950 kg, skupna masa: 12 000 kg 5,5 kW Duedpfx Ajwpmckjbvjp

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Djdpfxsw Iq Ugs Abvoup Good condition

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Duoded Ixadjpfx Abvep Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 48.274 h, število osi: 6, stiskalna sila: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electrohydraulic upper drive, and 2D graphic control DA 69 on a 10.4" colour display. The machine is equipped with a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending operations. Regularly serviced as part of a TRUMPF maintenance contract. Contact us for further details on this machine. • Free column gap: 3680 mm • Installation height: 535 mm • Control: 2D graphic control DA 69 on window with 10.4” colour screen • Electrical equipment: for 400 V / 50 Hz three-phase current • The machine has undergone annual maintenance • Maintenance contract in place • Rigid machine frame, welded all-steel construction • Press beam with high bending resistance • High-dynamic direct electromechanical drive (torque motor) • Electrohydraulic upper drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3 axes (X1, R1, Z1) and 6-axis options • Rack-and-pinion drive for X and R axes • Safe, front-accessible movement of backgauge fingers • Upper tool holder system Modufix, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Integrated operating system Windows XPe, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network capable, teleservice via modem Djdpfx Absx D D Hysvoup • Control cabinet air conditioning • Side-mounted safety doors and rear safety cover • 2-button foot switch for standing or seated operation • LED lighting in rear work area • LED lighting in front work area • Ergonomics package: comfortable front work surface and footrest • 2 storage consoles and 2 document compartments • 24,000 operating hours, brakes renewed in 2024 • TRUMPF tools maintained, all within tolerance Additional equipment • Backgauge system with 5 axes and control cabinet cooling • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC crowning • BendGuard safety device • Foot switch • 2x front support consoles • 1x bending aid with 900 mm park position • Table extension for base table / auxiliary table Technical Specification Bending length: 1020 mm

Stanje: rabljeno, Leto izdelave: 2005, 2005 BIESSE ROVER B 4.40 FT CNC obdelovalni center s 3 osmi Tehnične značilnosti na zadnji fotografiji Delovne ure stroja: 45.343 Dedpfxowmdyne Abvsup Ure v avtomatskem načinu (delo): 27.267