Berg & Schmid Gbs 242 Dg Autocut nakup rabljenega (2.502)

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Blade speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter hydraulics, semi-automatic GBS 250 Super HA-I Easy • Miter cutting left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece – very quiet and low vibration operation • Hydraulic vise, laterally adjustable • Precision industrial-grade bearings • Heavy-duty vise and cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (infeed side) • Ball-bearing mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to material start, or proceed directly with cutting for serial cuts 4. Stop saw blade 5. Raise frame just above the material Isdpfx Alefn Ando Noia 6. Open vise

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Control system: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space required: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cutting start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting! • Optimize workflows through CNC control Input options for various parameters such as quantity and material length, automatic offset calculation for the cutting channel Isdpfx Alod Iipzj Neia • CNC control for 10 different sawing programs with 99 sub-programs each for different lengths and quantities (e.g. 1 sawing program with various section lengths) • Automatic feeding unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnants length 170 mm.

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Iiedpfx Alefg E Hmo Nsa Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double mitre bandsaw for fast cutting with Pusher System P15. Option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures seamless interaction of linear encoder and self-braking positioning motor in combination with reliable hydraulic braking via large-radial centre positioning. The work table is mounted on high-quality preloaded bearings, which ensure extremely smooth rotation. CNC control Iijdpsfg E Hnofx Al Nea A CNC control enables programming of up to 90 cutting programs with different cutting lengths, quantities and mitre angles. Positioning system with double-sided clamps The B&S pusher system—feeding and positioning system—is equipped with double-sided hydraulic gripping tongs. This ensures secure gripping and transportation of materials and bundles deviating slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, ground rack, and a frequency-driven robust gearbox motor.

Stanje: novo, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total connected load: 2.2 kW Machine weight approx. 0.99 t Ijdpsd Iiprofx Al Noia Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet operation with minimal vibration • Removable chip tray (disinfection) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Top access to saw, material and feed unit • Safety cover can be folded up • Fine feed adjustment • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different saw programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 250 Super VA-I MPS • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation Iisdpfx Aljd Iip As Nea (cuts without programming) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover (a). • Material height sensor (c). (Automatic cut start detection) • Frame and gearbox cast in one piece, very quiet cutting and low vibration • Removable chip tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering required quantity and length: material infeed, cutting process, and piece counting until the program is completed • MPS control for setting the required number of feed strokes • All important machine data is displayed on the LED display during the cutting process (power consumption, cutting time, quantity) • Entered data is stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or by reverse feed function, repeatable 1 - 29 times, remaining workpiece length 210 mm

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Iisdeupw R Aspfx Al Nja Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length 4020x34x1.1 mm Iisdpfsd Iiptjx Al Nsa Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.8/2.2 kW Machine weight approx. 0.68 t Space requirement approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Optimum access to material • Ammeter for monitoring: - Cutting force optimization - Blade service life - Cutting performance • Vice opens/closes hydraulically • Chip removal brush • Material rotary table with ball bearings • Quick-release vice, adjustable • Material height sensor (automatic detection of cutting start) Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid descent to material start, or direct cutting in serial operation 4. Switch off saw blade 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double miter metal band saw, frequency inverter, hydraulic semi-automatic model GBS 250 Super HA-I Easy • Miter cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Guided, high-quality industrial bearings • Robust vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cutting monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller (infeed side) • Ball-bearing, rotating table Semi-automatic features: 1. Clamp material 2. Start saw 3. Rapid descent to material or direct cutting in serial operation 4. Saw blade off 5. Raise frame to just above the material 6. Open vice Iiodofgyh Uepfx Al Noa

Stanje: novo, Cutting diameter: 305 mm Cutting capacity at 90° (flat): 350 x 200 mm Cutting capacity at 90° (square): 260 mm Cutting capacity at 45° (flat): 230 x 200 mm Cutting capacity at 45° (round): 250 mm Cutting capacity at 45° (square): 230 mm Cutting capacity at 60° (flat): 170 x 100 mm Cutting capacity at 60° (square): 155 mm Cutting capacity at 60° (round): 175 mm Speed range: 18 – 110 m/min Saw blade dimensions: 3,375 x 27 x 0.90 mm Working height: 880 mm Total power requirement: 1.5 / 1.8 kW Iedoxabacspfx Al Njia Machine weight approx.: 840 kg Space requirement approx.: 1,900 x 1,850 x 2,000 mm Features: - Mitre cuts left 45°: automatic operation - Mitre cuts left 60°: semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gearbox single-cast construction - Extremely quiet and low-vibration cutting - Removable chip tray (for cleaning) - Shock-proof and ergonomic control panel with oil-resistant EPDM cover - Excellent accessibility to saw, material, and feed unit - Safety cover foldable - Fine adjustment of feed rate - Semi-automatic cutting BERG SCHMID CNC Control: - Input of various parameters such as piece quantity and material length, automatic kerf compensation - Up to 10 different sawing programs, each with 99 sub-programs - For different lengths and quantities, e.g., one cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm - Single-stroke feed carriage 500 mm Manufacturer's information: When installing this saw in a network with a residual current circuit breaker (RCCB), this should be all-current sensitive and rated at no less than 300 mA.

Stanje: novo, Cutting diameter: 305 mm Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Ijdpfx Asu Dbvtol Noia Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° to the left and 45° to the right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion Iisdpfofgyicex Al Noa • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600 x 400 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Iiedpsupxupsfx Al Nsa Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Miter angle left & right up to 60° • Frequency-controlled saw drive • 34 mm blade height • Wear-free, ball-bearing mounted swiveling material support table • Saw blade guides adjustable via extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Free-standing, safe and ergonomic control panel • Storage space for saw blades and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast pre-tensioning (front loading) • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Minimum cutting diameter round from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or, for serial cutting, direct cutting 4. Switch off saw blade 5. Raise frame just above material 6. Open vise

Stanje: dober (rabljeno), Stroj za rezanje navojev Berg + Schmid Delta 4 Opis izdelka Obseg rezanja: R 1/3 - 4", M8-M52 Isdpfx Alsyy S Efe Neia Zmogljiv kondenzatorski motor 230V, 1 kW, posebno tiho delovanje 3 hitrosti vrtenja: 15, 27, 58 min-1 (tudi pod polno obremenitvijo, vgrajen menjalnik) Z 2 avtomatskima rezalnima glavama: R 1/2 - 2", R 2 1/2 - 4" Komplet z rezalnimi čeljustmi R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", konične DIN 2999 Samodejno hlajenje neposredno skozi rezalno glavo Hitro-vpenjalna glava, rezalnik cevi, notranji rezkalnik cevi Vključno z opremo za varnost pri delu z varnostnim nožnim stikalom in 4 podstavki

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2019, 2-stebri visokozmogljiv avtomatski tračni žagalni stroj BERG & SCHMID SBS 300 VA-1/CNC Leto izdelave: 2019 Premer reza okroglo: 300 mm Premer reza kvadratno: 300 mm Premer reza ploščato: 300 mm x 260 mm Hitrost traku: 20 – 100 m/min Sodobno upravljanje SNC 20 Žaganje z regulacijo frekvence Upravljalne tipke s piktogrami Pogonska ščetka za ostružke Iiodpfx Aloyw H Ene Nja Hidravlično napenjanje traku Regulacija vpenjalnega pritiska Delovna luč Transporter za ostružke Valjčna proga 2 m

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting capacity flat: 300 x 260 mm Saw blade length: 3920 x 34 x 1.1 mm Table height: 780 mm Blade speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Unused exhibition machine!!!! 2-column high-performance automatic bandsaw of the SBS series • Modern SNC 20 control in CNC configuration • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic blade tension • Adjustable clamping pressure Iodpfx Alexfwbte Nsia • Double vice (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables convenient and user-friendly input of up to 20 different sawing jobs (length and quantity). When the desired dimensions are entered, the control automatically calculates the cutting waste and the number of feed cycles. In addition, the error code display system allows for fast troubleshooting. Including band run-off detection (€1,800)

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting dimensions flat: 300 x 260 mm Saw band dimensions: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTIONAL PRICE!!!! 2-column high-performance bandsaw automats from the SBS series The SBS series impresses with sophisticated engineering, high quality, durability, and an unrivalled, comprehensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping force • Double vice (in front and behind the band) • Creep mode for positioning Iiedpfxsfb Nbfo Al Nsa • Electrical and hydraulic bundle clamping preparation • Chip conveyor The SNC 20 control enables convenient and straightforward programming of up to 20 different sawing operations (length and quantity). When the target dimension is entered, the control system automatically calculates the saw kerf and the number of feed cycles. In addition, the error code display system allows for quick fault diagnosis and troubleshooting.

Stanje: novo, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 – 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series impresses with proven technology, superior quality, durability, and an unrivalled range of standard features. • Modern SNC 20 control system (CNC version) • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation Isdpofb Nbgefx Al Noia • Double clamping vice (in front of and behind the band) • Creep speed for positioning • Electrically and hydraulically pre-equipped bundle clamping • Swarf conveyor The SNC 20 control system allows for convenient and straightforward programming of up to 20 different sawing tasks (length and quantity). When entering the desired length, the control system automatically calculates cut loss and the number of feed strokes required. The error code display system also enables quick error analysis and troubleshooting.

Stanje: novo, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series stands out for its advanced technology, high quality, durability, and an exceptionally extensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive Ijdjfg E Hvspfx Al Nsia • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Jog mode for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables easy and intuitive input of up to 20 different sawing jobs (length and quantity). Upon entering the required dimensions, the control automatically calculates the saw kerf and the number of feed cycles. Additionally, the error code display system provides rapid fault analysis and troubleshooting.

Stanje: novo, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangular 610 x 450 mm Saw blade length 5320 x 34 x 1.1 mm Blade speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start detection) Automatic feed unit via ball screw incremental feed with automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure switch-off in idle mode Iiodofu Nbbjpfx Al Nsa Mechanical swarf removal brush, feed vice opens on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple cutting jobs with various cutting lengths and quantities. Automatic feed unit, 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Selection of 3 different material feed rates Visualization of the entire workflow with simple data entry

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Ijdpfjfgyifex Al Njia Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth and ergonomic sawing Specially developed for cutting profiles, beams, and solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting with the K-tech 800H model, the machine is equipped as standard with an additional horizontal clamping vise. The interaction of the hydraulic saw frame lowering, material positioning, and the pusher system is controlled by CNC. The machines come standard with the environmentally friendly 'B&S Clean Cut cutting system' with minimal quantity lubrication, saving on cleaning effort and conserving resources. CNC Control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feed and positioning unit, is fitted with 'double-opening clamping jaws' controlled hydraulically. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Iiedpjfgyigefx Al Nsa Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirements approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H, with push system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeder, and positioning system is equipped with "double-sided opening gripper jaws" that are hydraulically actuated. This ensures safe gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is built as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting capacity at 90°: round 105 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: rectangular 100 x 105 mm Saw band dimensions: 1335 x 13 x 0.65 mm Dimensions (L x W x H): 650 x 310 x 300 mm Band speed: 30 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Special Offer Price!! Berg & Schmid - Portable Band Saw PBS 90 ESC High-performance and particularly robust metal band saw with aluminum die-cast saw table and stepless cutting speed for mitre cuts up to 60° Shipping cost share: 25 EUR Iodpfx Aefv Aq Rjl Noia Images show identical PBS 110 model.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. Iodpfjfg E Hpex Al Nsia • The electro-welded machine frame and steel saw frame fulfill all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and speed adjustable. • All machine movements (saw frame, vice, feed, saw band guides) operate using modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction. • Another key feature is the material positioning rollers, driven by a hydraulic motor. They move at a right angle to the material, allowing optimal material clamping. • Thanks to the height control of the saw band position, the operator can place the band close to the top of the material. After the cut, the band automatically returns to its previous position. Remaining in the lower position can also be selected as an alternative. During the cutting cycle, the software compares cutting load with preset parameters, allowing the sawing system to stop if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. • Finely ground carbide inserts that clamp the saw band, complete with side-hardened and adjustable guide rollers. The adjustable band guide moves automatically as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder controlled by the machine software. Tension is automatically relieved after a set period if the machine is in standby mode or after a cycle has finished. • Automatic CNC-controlled versions are available in the X-TECH 900 / 1200 models, with a feed length of 500 mm for the high-production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, to ensure precise positioning even under maximum load. • All guided movements are operated by four recirculating ball guides with a high capacity for static and dynamic loads, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: zelo dobro (rabljeno), Premer žaginega lista: 370 mm Območje reza pri 90° okroglo: 120 mm kvadratno: 100 mm pravokotno: 180 x 100 mm pri 45° okroglo: 120 mm kvadratno: 100 mm pri 60° okroglo: 110 mm kvadratno: 90 mm 2 hitrosti vrtenja žaginega lista: 15/70 vrt/min Pogonski motor: 400 V, 1,8/2,2 kW Iodpfex Ek A Tex Al Nsia Potrebni prostor: 1000 x 1000 x 1800 mm Teža: 390 kg