Kapna žaga nakup rabljenega (128)

Stanje: dober (rabljeno), Leto izdelave: 1997, Podmizna kapna žaga Gjdpfjxtwk Djx Ab Tokf maks. širina reza 800 mm maks. višina reza cca 150 mm žagin list 550 mm z 2 valjčnimi mizami, desna z omejevalom in mersko lestvico

Stanje: rabljeno, Leto izdelave: 1997, 1 kos kapna žaga ELEKTRA BECKUM HOPPY MASTER KS250 Proizvajalec: ELEKTRA BECKUM HOPPY MASTER KS 250 Gsdpfx Absx A A Sls Tskf Tip: HOPPY MASTER KS250 Barva: modra Letnik: 1997 Dodatki: s podstavkom Mesto uporabe: skladišče Stanje: rabljeno

Stanje: rabljeno, Leto izdelave: 2025, Dimensions (L/W/H): 6400 x 1500 x 1780 mm Total Power Requirement: 19 kW Weight: 1800 kg Optimizing Crosscut Saw WINTER QUICK 100 NC - Minimum workpiece length: 300 mm - Workpiece width min. / max.: 20–220 mm - Workpiece thickness min. / max.: 15–100 mm - Workpiece thickness tolerance: ±3 mm - Maximum tolerance range (per side) of the workpiece: 10 mm/m Gkjdpewt Ua Esfx Ab Tef - Type of wood: softwood or hardwood - Minimum cut-off length: 80 mm - Maximum feed speed: 180 m/min - Cutting speed: 0.15–0.3 s - Total power: 19.0 kW - Saw motor: 7.5 kW - Feed servomotor: 5.5 kW - Saw stroke servomotor: 4.5 kW - Conveyor belt motor: 0.75 kW - Beam lift motor: 0.37 kW - Extraction port diameter: 2 × f120 mm - Table height: 900 mm - Overall dimensions: L=6400 mm, W=1500 mm, H=1780 mm - Weight: 1800 kg Standard Configuration: - Infeed and marking station with servo drive - Infeed belt and saw stroke, each with individual servo motor drive - 2.5 m outfeed conveyor with fluorescence sensor and ejection - Saw blade with integrated waste blow-off device - User-friendly 10.1-inch TFT touchscreen - Air tank for stable pressure force - High-performance servomotor - Fully enclosed safety cover for quiet and safe operation Efficient production—can replace 4–8 sets of conventional manual crosscut saws.

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm Gksdpfx Abjw Sy T He Tjf (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 035-123781, Rabljeni stroj Gama 63 K3 je delujoč. Vse podrobnosti so prikazane na fotografijah in v PDF datotekah. Gsdpfex Ev Ubjx Ab Tokf

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Holtec ES 121 SHK 4 m Letnik izdelave: 2022 Krmiljenje: Simatic HMI Verižna žaga: 4788 (190 cm) Vodilo: 3322 (190 cm) Gedpfx Abox Dmavs Tjkf Podatki o razrezu lesa: Paketi za rezanje: maks. 4200, viš.= 1200 šir.= 1200, najmanj: 2.500 Paketi po rezu: maks: 4000, min: 700 Ostanki po rezu: maks. 300 Obratovalna napetost: 400 V 50 Hz Polnjenje z oljem: HLP-D-32 Kapaciteta rezervoarja: 70l Tlak: 70 bar Stroj je neuporabljen in razstavljen. Ogled možen kadarkoli.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Cutting fixed lengths according to cutting list and cropping out defects Cutting cycle: Defect cropping via chalk marking Cutting to fixed lengths Standard and sequential cutting Sequential cutting in marking mode Incoming material: variable lengths with single-piece loading WS.1 Through-feed crosscut saw 4 pcs lower feed rollers 1 pc loading table, 2 meters right, with double marking table 1 pc outfeed table, 1 meter, with rear stop Roller height adjusted manually 12 pcs luminescent chalk Cutting capacity: Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: Color touchscreen 7" Editing of cutting cycles directly at the machine Programming options: - Defect cropping via marking - Operating with cutting lists consisting of 10 dimensions, repeat option for each size, and total piece count for each size 100 memory slots for cutting lists Recognition system for the last two workpieces to be cut and the following piece Electronic control of the sorting unit with No.1 ejection kicker (ejection kicker optional) Gkjdpfx Aox Da Tvjb Tef Technical specifications: Feed system motorized adjustment, brushless and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting speed per minute up to No. 100 Minimum bar length 550 mm Minimum bar width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with double marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Roller height motorized adjustable

Stanje: dober (rabljeno), Koda: 0239 Znamka: STROMAB Model: CT 800 - CE Standard Rezkalni center za tramove, leseno konstrukcijo, lesene strehe, žage, balkone in drugo – v skladu s CE standardi Tehnični podatki Premer žaginega lista: 800 mm Moč motorja: 20 KM Število osi: 5, krmiljenih s programatorjem: vrtenje žagine mize (0–340°) – hitrost vrtenja mize: 9 s na 180° – nagib rezila od 90° do 45° (hitrost nagiba rezila 20 s) – višina rezila nad mizo (hitrost 15 s na 10 cm) – pozicioniranje in merjenje tramov (hitrost 17 m/min) – motorizirano pozicioniranje žagine mize glede na ograjo: 600 mm Fotocelica za samodejno zaznavanje začetka obdelovanca Par vertikalnih cilindrov za upravljanje optimizacije razreza Kapaciteta razreza pri 90° z enim hodom: 280 x 290 mm / 250 x 390 mm / 200 x 450 mm Pri 90° z drsenjem žagine mize in ponovljenim rezom: 280 x 770 mm / 250 x 840 mm Pri 45° z enim hodom: 200 x 210 mm Gkodpoxv Su Aofx Ab Tsf Pri 45° z drsenjem žagine mize in ponovljenim rezom: 200 x 760 mm Maksimalna višina vzdolžnega reza: 300 mm Natančnost reza: ±2 mm na 10 m tram (ravni tram) – ±0,2° pri vrtenju mize – ±0,2° pri nagibu rezila Upravljanje s standardnim industrijskim PC-jem, zaslon na dotik, Windows operacijski sistem, USB vmesniki, Ethernet Transportni valjčki: - 3 mize z prostimi valjčki, dolžina 2 m, premer valjčka 133 mm Widia žagin list premer 800 mm Stisnjen zrak: 6/7 bar Teža stroja: 2900 kg Skupna teža: 3250 kg (stroj + valjčne mize)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Gkedpfxov A Htko Ab Tof Electrical specifications: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: rabljeno, Leto izdelave: 1994, Dolžina reza po lestvici do 5000 mm, žagin list 420 mm, valjčna proga 1500 mm, elektromotorski pomik desnega agregata, digitalni prikaz mer, žagini agregati vrtljivi in nagibni. Lokacija skladiščenja: pri stranki. Gedpfow Sadrsx Ab Tjkf

Stanje: rabljeno, Leto izdelave: 1996, Višina reza pri 90°: 200 mm Dolžina reza: 410 mm Ročni kot horizontalno: 45° - 90° - 25° Ročni kot vertikalno: 60° - 90° - 30° Transportni valj/odlagalna miza: ne Premer žaginega lista: 520 mm Število vrtljajev: 2800 v/min Moč motorja: 5 kW Motorna zavora: da Priključek za odsesavanje: 100 mm Vpenjalo: da Dolžina stroja: Gsdpjxu Dhxjfx Ab Tokf Širina stroja: Teža: 300 kg

Stanje: zelo dobro (rabljeno), Kataloška številka 7800 TEHNIČNI PODATKI - maksimalni premer rezila: 400 mm - zaščita za rezilo - premer odprtine rezila: 80 mm - maksimalni premer obdelovanca pri rezilu: 400 mm, 130 mm Gkjdpfx Aexr Dd Ijb Tef - motor: 9,2 kW - pogonski motor za podajanje: 4×0,3/0,45 kW - 2 hitrosti podajanja - vpenjala materiala: 6 kosov (od tega eno pnevmatsko nastavljivo) - dimenzije D/Š/V: 4650x1120x1280 mm - teža cca 1000 kg PREDNOSTI – za palisade – enostavno upravljanje – rabljena žaga, zelo dobro ohranjena Neto cena: 16.900 PLN Neto cena: 4.020 EUR pri tečaju 4,2 EUR (Cene se lahko spreminjajo zaradi večjih nihanj tečajev)

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Kapna žaga s podstavkom + odsesovanje, letnik pribl. 2005 Godpfx Abexwc Ics Tskf

Stanje: rabljeno, Precizna kap in kotna žaga / Precizna Kapp- in Gehrungssäge OMGA T55 300 Leto izdelave / Leto cca. 2009 Gsdpoxvh E Refx Ab Tskf z odsesavanjem Premer žaginega lista 300 mm Širina reza max. pri 90° 135 mm Širina reza max. pri 45° 90 mm Višina reza max. 98 mm Fiksne točke pri 45°–30°–22°30'–15°–10° desno in levo Zelo dobro ohranjeno stanje Nastavljiva precizna kap in kotna žaga z vrtljivo mizo, samozaklepanjem na glavnih kotih 45°, 30°, 22°30’, 15°, 10° in 0° desno in levo, ročnim zaklepanjem vmesnih kotov, prikazom kota na stopinjski lestvici. Online video pregled preko WhatsAppa – MS Zoom – Telegram Na zalogi v Emskirchen/Nürnberg – Na voljo takoj – Možnost testiranja

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking Gkodpfxov A Htds Ab Tjf - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. Gkedoxnlgcopfx Ab Tjf STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: rabljeno, Višina reza pri 90°: 135 mm Dolžina reza: mm Območje zamika horizontalno: - Območje zamika vertikalno: -60° do +60° Valjčna proga / odlagalna miza: ne Premer žaginega lista: Gsdpoxu Dhrofx Ab Tjkf Število obratov: 2800 obr/min Moč motorja: 2 kW Motorna zavora: da Prisledek: da Razpršilna naprava: da Priključek za odsesavanje: 100 mm Dolžina stroja: Širina stroja: Teža: 110 kg

Stanje: zelo dobro (rabljeno), Kataloška številka 7837 TEHNIČNI PODATKI - maks. premer žaginega lista: 450 mm - premer vretena: 30 mm - zgornja pnevmatska pritrditev - zaščita za žagin list - zaščita žaginega lista služi tudi kot pritiskalo - pnevmatsko izvlečenje žaginega lista - višina reza: 125x125 mm, 100x250 mm - kapaciteta rezanja (debelina x širina): 50x530 mm, 100x480 mm, 150x380 mm, 200x200 mm - glavni motor: 5,6 kW - premer odsesovalnega priključka: 100 mm - dimenzije delovne mize (d/š): 660x480 mm - višina mize od tal - 2 kos valjčnih miz - dovodna valjčna miza z vodilom: 1500 mm - odvodna valjčna miza z vodilom + zapah: 1500 mm - širina drsnega valja: 300 mm - delovni tlak: 8 bar - skupne dimenzije stroja (brez valjčnih miz) d/š/v: 940x780x1150 mm - teža: cca 450 kg PREDNOSTI – izdelano v Nemčiji – tehnična dokumentacija DTR – 2 valjčni mizi – pnevmatski pomik žaginega lista – rabljena žaga v vrhunskem stanju Neto cena: 14.900 PLN Neto cena: 3.550 EUR (odvisno od tečaja 4,2 EUR) (Cene se lahko spremenijo ob večjih nihanjih tečaja) Gkedpfx Ajx Arhceb Tof

Stanje: novo, Leto izdelave: 2025, Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw featuring a maximum cutting height of 200 mm Robust grey cast iron construction Precision ball bushing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and adjustable stop Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range - horizontal: 45°- 90°- 25° Mitre range - vertical: 60°- 90°- 30° Saw blade diameter: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: From stock 54634 Bitburg Gksdpfx Ajw Hl Aqjb Tef - Immediately available - On request, we are happy to offer you the saw blade as well.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm Gedpfx Absv A Hr Te Tokf - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2024, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precision linear ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable end stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Gsdpfx Ajcnz Rvjb Tskf Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range, horizontal: 45°-90°-25° Mitre range, vertical: 60°-90°-30° Saw blade Ø: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: Ex stock 54634 Bitburg - Immediately available - We can also supply the saw blade on request.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4500 x 1200 x 1200 mm Weight: 1,500 kg Total power requirement: 8 kW Optimisation Crosscut Saw WS1 - Cutting height Position A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Gkedpjvz Hz Ejfx Ab Tef Position B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed: up to 100 cycles/min - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3,600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right: 2,000 mm with double marking station - Outfeed table left: 1,000 mm - Extraction connection diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7'' colour touch screen for easy operation + fixed-length crosscut mode + sequential crosscut mode (10 different dimensions can be saved) + crosscutting of marked chalk lines + fixed-length and marked chalk line crosscutting - CE conformity - Dimensions: L=4500, W=1200, H=1200 mm - Weight: 1,500 kg

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 3000x1070x1200 mm Gewicht 1150 kg Gesamtleistungsbedarf 10 kW Optimierungskappsäge OPTIMAX 100 - Sägemotor 7,5 kW - Drehzahl 3200 U/min. - Vorschubmotor 2,0 kW - Vorschubgeschwindigkeit stufenlos regelbar bis max. 80 m/min. - Schnittgeschwindigkeit bis zu 80 Takte/min. - Sägeblatt Ø 455 mm - Sägeblattbohrung 30 mm - Schnitthöhe 100 mm (gemäß Schnittdiagramm) - hohe Schnittgenauigkeit +- 1 mm - min. Werkstücklänge 300 mm - min. Abstand zwischen der Markierung 20 mm - min. Werkstückgröße 300 x 30 x 10 mm - PLC Steuerung mit Touch-Screen für einfache Bedienung + Kappschnitt Fix-Längen-Modus + Sequentieller Kapp-Modus (10 verschiedene Maße speicherbar) + Kappschnitt von markierten Kreidestrichen + Kappschnitt Fix-Längen und von markierten Kreidestrichen Gjdpevz Hzxsfx Ab Tjkf - Einlauf-Rollentisch rechts 1200 mm - Auslauftisch links 1000 mm - Druckluftanschluss 8 bar - CE Konformität - Abmessungen L=3000, B=1070, H=1200 mm - Gewicht 1150 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 0x0x0 mm Weight: 0 kg Total power requirement: 0 kW Automatic miter saw CT-600-6000 - Hydraulic under-table circular saw unit - Motor power: 7.5 kW - Saw blade diameter (Z=48x5): 600 mm - Saw blade bore diameter: 30 mm - Tilting worktable: Yes - Automatic table rotation: -70° 0° +70° - Table rotation speed to/from 0° / 70°: 3 s - Positioning accuracy: +/- 0.2° - Pneumatic workpiece hold-down clamps: 2 units - Pneumatic side aligners: 2 units - Safety guard over crosscut unit: Yes - Cutting capacity at 0°: 160 x 310 mm, 80 x 390 mm - Cutting capacity at 45°: 160 x 220 mm, 80 x 270 mm - Cutting capacity at 70°: 160 x 90 mm, 80 x 130 mm - Minimum workpiece thickness: 10 mm Connection specifications - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Compressed air requirement at 8 bar per cycle: approx. 8 Nl - Extraction port Ø100 mm: 2 units - Extraction port Ø160 mm: 1 unit - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Driven by brushless servo motor - Feed system with precision rack and pinion and measurement via servo motor - Pneumatically liftable pusher for bypassing the workpiece in the next cycle - Positioning tolerance: +/- 0.4 mm Control system: - Beckhoff industrial PC control with Windows CE operating system with touchscreen - Data entry via keyboard, USB, or network - 5 optimization criteria: a) Maximum length b) Minimum scrap c) Part priority d) Volume Gkedjvz Eq Sopfx Ab Tof e) Value - Processing of individual part lists or consolidation of orders - Graphical display of parts in progress - Batch processing capability - 70 cutting lists with 21 sizes per list or a single cutting list with 400 sizes - Safety device - CE compliant - Protective enclosure included

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 9400x1200x1600 mm Gewicht 1400 kg Gesamtleistungsbedarf 12,5 kW Automatische Kappsäge ASKS-6060 - Sägeblattdurchmesser 600 mm - Aufgabetischlänge 6 m - Max. Einzugslänge 6,1 m - Auslauftischlänge 1,2 m - Schnittstärke 10–140 mm - Schnittbreite 30–300 mm - max. Schneidebereich 120 x 280 mm - max. Dicke x Breite 140 x 300 mm - Vorschubgeschwindigkeit 5-30 m/min - Sägeblattbohrung 30 mm Gkedpfsvz Ekrox Ab Tjf - Frässpindeldrehzahl 3150 U/min - Servoantriebsmotorleistung 1,0 kW - Schneidmotorleistung 11,0 kW - Gesamtleistung 12,5 kW - Spannung 400 V, 50 Hz, 3 Phasen - Materialspannung mittels Zylinder, Luftdruck 0,5–0,7 MPa - Schnitttoleranz +/-1 mm - Absauganschluss 2 x 150 mm - Zwischenrelais Honeywell - Elektrische Komponenten Schneider - SPS & Touchscreen Siemens - Maschinengröße 9,4 m x 1,2 m x 1,6 m (6-m-Modell) - Maschinengewicht 1400 kg Verpackungsmaß: 1 Colli 1600*420*800mm 1 Colli 1300*1120*1990mm 1 Colli 2300*720*590mm