Precizna kap in kotna žaga

OMGA T55 300

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg Laedocqvhwopfx Ahuoc - immediately available -

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm Ledpfx Aeh Nvyzjhusac -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min Lsdpfx Ahewvqkleujac • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Lajdpfeug Ty Hox Ahuec Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 9.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3284, Standardna različica RUF Lignum R2 z izstopnimi kanali, el. motor 22 kW, velikost briket 150x60 mm, zmogljivost do 500 kg/h Lajdpfxsyyl Sro Ahujc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Splošni podatki Širina: 2.300 mm Globina: 2.800 mm Višina: 2.700 mm Teža stroja: 4.500 kg Glavni pogon Območje vrtljajev vretena: 10.000 min⁻¹ Moč motorja vretena: CAT40 / SK40 Število osi: 4 Pomik Pomik osi X: 762 mm Hitri pomik osi X: 24 m/min Pomik osi Y: 508 mm Hitri pomik osi Y: 24 m/min Laodpfxjx D Ikpj Ahuec Pomik osi Z: 610 mm Hitri pomik osi Z: 24 m/min Miza Velikost T-utora: 18 mm Število T-utorov: 5 Nosilnost mize: 750 kg To štiriosno obdelovalno centro Hurco VMX30 je bilo proizvedeno leta 2004. Ponaša se s CNC rezkalnim strojem z vrtljivo mizo za funkcionalnost četrte osi. Ključne tehnične lastnosti vključujejo hod po osi X 762 mm, Y 508 mm, Z 610 mm in dimenzijo mize 1.016 × 508 mm. Največja hitrost vretena je 10.000 min⁻¹, revija za orodje ima kapaciteto 24 orodij. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Hurco VMX30. Za več informacij nas kontaktirajte. Uporaba Rezkanje

Stanje: rabljeno, Tenon cutter / Dowel saw LOSER model AA220 - USED Lasdpjqpdkcjfx Ahusc - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6–18 mm.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment Ljdpfx Ajhlp D Njhusac - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: novo, Leto izdelave: 2026, Za profesionalno in natančno doziranje količine lepila v izvrtinah za moznike in utorih zadnjih sten. Lasdpfx Ajdxz Tpohujc Kratek opis: • Vedno enaka in pravilna količina lepila • Ni potrebno naknadno čiščenje obdelovancev zaradi preveč lepila • Enostavno in minimalno čiščenje lepilnega sistema (1x tedensko, prek programa za izpiranje) • Prihranek pri stroških lepila • Ergonomska in lahka lepilna pištola v primerjavi z lepilnimi steklenicami • Hitrejše in natančnejše delo v primerjavi z lepilnimi steklenicami

Stanje: rabljeno, Rabljeni stroj Laedpfxsy R E U Ie Ahuoc Oprema in tehnični podatki: - 4-rezilna glava rezkalnika - Hitrost pomika 7,5/15 m/min - Skobeljni stroj: - Delovna širina: 500 mm - Skupna dolžina mize: 2200 mm - Motor: 4 kW - Debelinka: - Minimalna delovna višina: 3 mm - Maksimalna delovna višina: 235 mm - Maksimalni odvzem: 8 mm - Digitalni prikaz nastavitve višine z decimalnim prikazom Razpoložljivost: kratkoročno Lokacija: 63934 Röllbach