Izvlečna žaga

Graule ZS 200 N

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: diverse, The Professional for Cross-Cutting, Mitre, and Compound Cuts The ZS 200 N is optimally suited for cross-cutting, mitre, and compound cuts. Materials such as wood, PVC, and aluminium profiles can be machined cleanly and precisely. The saw unit runs on a hardened guide arm and can be swung horizontally to mitre on both sides. The 'N' stands for inclination, indicating that the saw unit can also be tilted vertically to the side — allowing for easy compound cuts. ZS 200 N Fact Check - Crosscut and mitre circular saw with a maximum cutting height of 200 mm - Robust grey cast iron construction - Precision ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 65° horizontally and up to 60° vertically - Re-adjustable fixed stops, lower saw blade guard - Can be connected to an extraction system - Machine can be tilted to both sides from the front - Hydraulic feed brake Technical Specifications: - Motor: 400 V / 5.0 kW - Speed: 2800 rpm - Cutting length: 420 mm (at 90°) - Cutting height: 200 mm (at 90°) - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 60°-90°-30° - Saw blade diameter: 520 mm - Weight: 310 kg Scope of Delivery: Gisdoh Nu Iujpfx Afqel - Crosscut and compound saw ZS 200 N - Machine stand - Machine tiltable to both sides from the front - Hydraulic feed brake - Circular saw blade HM Z 60 neg. - Operating tools and hand crank

Stanje: dober (rabljeno), Leto izdelave: 2013, Formatna krožna žaga Felder K 975 Dolžina reza: 3200 mm Širina reza: 1350 mm Maksimalna višina reza: 130 mm (premer žaginega lista 400 mm) Digitalen naklon žaginega lista in predrezovalca: 0–45° Digitalna nastavitev višine žaginega lista in predrezovalca Vzporedni prislon, ročno nastavljiv Vklop glavnega žaginega lista in predrezovalca s krmilne plošče in/ali iz strojne mize Gsdpfjxl Dw Uex Afqjil Glavni motor formatne krožne žage: 5,5 kW (7,5 KM) (nastavljive vrtljaje 3500/4500/5500 obr/min) Motor predrezovalca formatne krožne žage

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Gijdpfxsi Dfids Afqel The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, nazivna moč: 5 kW (6,80 KM), 5 kW / 7.5 HP Cutting height: 200 mm Gijdpfx Afsdxw U Ioqol Tiltable up to 60° to the left, up to 30° to the right (adjustable from the front via handwheel) Cutting height when tilted at 45°: 140 mm Cutting width: 420 mm; cutting width when swiveled at 45°: 290 mm Swivels up to 60° to the left, up to 45° to the right Includes saw blade for wood 6,000 mm heavy-duty outfeed roller conveyor, mountable on the left side, stop slide adjustable from the machine using a handwheel, pneumatically lockable, length digitally readable, digital display with 230V power supply 4,000 mm heavy-duty infeed roller conveyor, mountable on the right side Machine can be tilted on both sides from the front by handwheel and worm gear Optional extras available upon request, e.g., increased cutting height, material clamping, and laser cutting indicator

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Razpon vpenjanja: maks. 240 mm Višina reza: maks. 450 mm Globina reza: maks. 380 mm Gisdpfow Npk Aex Afqsl Moč motorja: 2,2 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 520 mm, skupna dolžina: 1.750 mm, skupna širina: 1.030 mm, skupna višina: 1.800 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, izvrtina žagine plošče: 50 mm, ❇️ Graule ZS 200 N – Crosscut & Mitre Saw | Excellent Condition | Fully Operational | UVV Safety Tested For sale on behalf of a customer: a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing facility. The machine is in excellent, well-maintained, and fully functional condition, and was in regular use until recently. UVV/Safety inspection has been carried out (see photos). Inspection and functional testing on site are possible at any time. ⸻ ❇️ Technical Data: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastics) • Saw blade Ø: 520 mm • Bore: 50 mm • Swivel range: large mitre range (fine scale) • Drive: 400 V • Application area: Primarily for aluminium and profile machining • Design: Heavy-duty industrial standard version ⸻ ❇️ Features & Highlights • Very robust machine stand • Large work table on both sides (laminated multiplex) • Pneumatic hold-down clamps • Extraction hood / extraction nozzle • Digital measuring/stop system (display mounted above) • Precise swivel mechanism with angle scale • Ideal for aluminium profiles in window construction • Ready for immediate use • Only original Graule circular saw blades permitted (manufacturer’s note) ⸻ ❇️ Condition • Excellent, well-maintained, immediately operational • Fully functional • Clean appearance • Still in use • UVV safety tested ⸻ ❇️ Sales & Processing • Invoice with VAT shown possible • Delivery or transport available at extra cost • Location: 72229 Rohrdorf • Loading facility with overhead crane on site ⸻ ❇️ Price: Offer price (net): €8,990 plus VAT ⸻ ❇️ Dimensions: • approx. D 175 cm x W 103 cm x H 180 cm Godpfxsx N Hxxj Afqsil ⸻ ⚠️ I am offering further workshop and metalworking accessories in my other listings. ‼️ Please also have a look at my other items—it’s worth it!

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range, horizontal: 45° - 90° - 25° Mitre range, vertical: 60° - 90° - 30° Gijdpfxsiy Ry Ao Afqjl Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Weight: 490 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Brand KDF110 Optimat Ambition – only 1,150 operating hours Make: Brandt Model: KDF 110 Year of manufacture: 2012 Serial No.: 0-261-20-6960 Control: Easy Control 10+ non-contact distance control, feed-regulated with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / workpiece guide: Central control, 2 roller tracks Jointing unit: 2 x 0.75 kW 200 Hz, including joint cutter set in DIA version, manual positioning via Siko counting dial, max. 3 mm stock removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing unit for hotmelt adhesive and PU application option, magazine, pressure zone with electro-pneumatic 2-point positioning via central control Pressure zone: 1st roller powered, 2 free-running rollers for excellent and consistent compaction End trimming unit: 0.18 kW, 12,000 rpm Milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotation, 3-position setting for chamfer/radius (R2), overhang and straight edges. Max. 3 mm edge thickness with Siko counting dial Profile scraper: max. 3 mm edge thickness Surface scraper: Reversible knife Chain width: 80 mm Edge material (roll): 0.4 – 3 mm Gjdexvirfopfx Afqsil End trimmer device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: for workpiece thickness 8–22 mm: 70 mm; for 23–40 mm: 120 mm (dependent on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed rate: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 520 mm, največja hitrost vrtenja: 2.800 obr/min, največja širina rezanja: 295 mm, skupna masa: 300 kg, premer ekstrakcijske šobe: 100 mm, izvrtina žagine plošče: 50 mm, globina reza: 200 mm, vhodna napetost: 400 V, moč: 5 kW (6,80 KM), vhodna frekvenca: 50 Hz, Dodatni tehnični podatki Širina reza: 90° 420 mm | pri 45° nagibu 295 mm Gsdpfx Aextpuuefqoil Globina reza: pri 45/90° nagibu 140 mm | 200 mm Posebna oprema 1019: Stroj je z ročnim vzvodom nagiben obojestransko spredaj 1002: Hidravlična zavora podajanja 1049: HM krožna žaga za les 520x4,0x50 mm / 60 zob negativnega nagiba

Stanje: novo, Saw blade diameter: 520 x Ø 50 mm Cutting diameter: 200 mm Cutting length: 420 mm Cutting height at 45°: 140 mm Saw blade specifications: 520x3.6/3.0x50 mm Speed: 2,800 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight approx.: 310 kg Dimensions (L x W x H): 1,400 x 900 x 1,650 mm - Cross-cut and mitre circular saw for cross cuts - Dual-sided mitre adjustment (60°/45°) with fixed stops - Dual-sided bevel cutting (60°/45°) with fixed stops - Robust cast iron construction - Precise linear guide of the tool carriage with ball bushings on hardened and ground steel shafts - Manual saw feed - Infinitely adjustable blade height - Connection for optional extraction unit Equipment: - 3.0 kW motor for aluminium cutting - Blade tilting via handwheel and worm gear (for bevel cuts) - Saw blade diameter: 520 mm - Saw blade bore: 50 mm - Saw blade speed: 2,800 rpm - 400 V / 3 kW (S6/40%) motor with brake and automatic star-delta starter Gedpfxjxaaxdj Afqoil - Machine weight approx.: 250 kg Cutting Data: - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Included Special Accessories: - HM saw blade 520x3.6/3.0x50 mm - Hydraulically adjustable feed brake - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with lever valve - Pneumatic saw blade spray system - Machine tiltable from the front to both sides via hand crank - Machine base - Powerful drive motor (3.0 kW)

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Briketirni stroj za les ali lesu podobne materiale Pretok: do maksimalno 100 kg/h Briketi: 60 mm valjasti Motor: 7,5 kW Dimenzije: približno 2150 x 1700 x 1400 mm Velikost zalogovnika: 1400 x 1400 x 920 mm Opcijsko: Odvodni sistem je mogoče namestiti kot lijak. Zahteve: Izhodni material naj bo idealno krajši od 25 mm dolžine oblancev Vsebnost vlage 6–12 % ATRO Stroj je primeren za diskontinuirano delovanje. Npr. do 2,5 ure briketiranja, nato 1 ura premora, itd. Če naj stroj deluje neprekinjeno dlje kot 2,5 ure, je treba priključiti dodatno hlajenje. Gisdpfxsw Hpizs Afqol

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Giodpfx Afok H Ic Usqsl Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Données techniques : Godpfx Afjn R A Ewoqsil Hauteur de coupe : 200 mm Hauteur de coupe à 45° incliné : 140 mm Pivotant à gauche jusqu’à 67° Pivotant à droite jusqu’à 45° 5 kW 1 frein d’avance hydraulique (en option) Longueur de coupe : 420 mm en position à 90° Longueur de coupe à 45° pivoté : 295 mm Inclinable à gauche : 60°, à droite : 30° Le réglage de l’inclinaison se fait à l’avant par manivelle. 1 lame de scie pour bois, diamètre 520 mm 1 convoyeur à rouleaux d’arrêt, lourd, longueur 6 000 mm, côté de montage gauche. La butée se règle par volant à main à l’avant. La longueur est lisible au millimètre près sur afficheur digital. La butée est verrouillée pneumatiquement. 1 afficheur digital, version 230 volts 1 convoyeur à rouleaux d’alimentation lourd, côté de montage droit, longueur 4 000 mm Longueur de la machine : 11 700 mm Entièrement mobile Machine emballée sur chevrons Les photos montrent la machine d’un client. Disponible sur demande aussi avec hauteur de coupe de 215 mm ou 240 mm.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12762, največja višina reza: 300 mm, Fully automatic timber infeed Feed roller conveyor Cross conveyor for loading and feeding Under-table swing cut-off saw 11 kW 5-axis universal milling unit - UF5 Combination support for vertically operating tools Drilling unit 2.2 kW - drilling direction vertical Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) - drilling direction horizontal Slotting unit 7.5 kW Rear marking unit (stop side) Fully automatic hydraulic beam turning station Transport and positioning system, two-hand operation Electronic control with Hundegger production software Roller conveyor for timber outfeed with pusher 5-arm wood stacking rack Safety devices and guards Refined machine surface Extension for loading cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit - UF5 Turret milling unit, vertical from above Remote maintenance possible Gedpjxxa Dwjfx Afqoil Special arrangement for electrical cabinet Control unit for waste disposal with control buttons Roller conveyor extension 7.10 m, non-driven Height-adjustable and lowering safety impact plate

Stanje: novo, Leto izdelave: 2024, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range, horizontal: 45° - 90° - 25° Mitre range, vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Godpfx Afeiuld Seqeil Extraction connection: 100 mm Machine length: Machine width: Weight: 300 kg