Zajeralna žaga

Graule ZS 200N - 5kW

Stanje: novo, Leto izdelave: 2025, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Bljdpfx Afoi Dfidjqjr Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Bsdoizkhvjpfx Afqjlr Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 520 mm, največja višina reza: 200 mm, dolžina podajanja os X: 420 mm, vrtljajska hitrost (min.): 2.800 obr/min, dolžina rezanja (maks.): 420 mm, zahteva za prostor dolžina: 8.800 mm, potrebna širina: 1.200 mm, dolžinski omejevalnik: 8.800 mm, pritisk: 5 letvica, moč: 5,5 kW (7,48 KM), višina obdelovanca (maks.): 200 mm, Oprema: dvostranski, Mobile saw frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 to 5960 mm, with digital LED length display, measuring length including extension approx. 8800 mm. Bledpev Hhg Tefx Afqjr Saw frame with 6 crank supports ensures stable standing during work. Equipped with electric power distribution and triple 230 V socket outlet. Mobile saw frame Beck ESF 1, ZS 200 saw mounted on the frame.

Stanje: novo, 400 V three-phase brake motor, 5.0 kW Saw blade diameter: 520 mm Saw blade bore: 50 mm Cutting height: 200 mm Saw blade tilted to 45°: cutting height 140 mm Cutting length: 420 mm Blodpfx Aovxr Thjfqjr Supplied with machine stand and rear hand crank for tilt adjustment

Stanje: rabljeno, Leto izdelave: 2014, Number of spindles: 5 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 600 Compact Bedpfowzmu Rex Afqjlr ----- Machine will be cleaned and fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles electronically adjustable for width and height Detailed description: ----- Technical specifications: Working width: 20–230 mm Working height: 10–120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 125–145 mm Tool circle rabbet cutter: 130–160 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for radial adjustment 2nd spindle – right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. tool diameter behind fence: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle – left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. tool diameter for straight knife heads: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC controlled Segmented pressure shoe in front of upper tool holder, adjustable to tool circle and can be swung away from the tool, spring-loaded. Pressure shoe before and discharge after the top spindle with electronic digital displays, integrated into the memory function or PowerCom. 5th spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5–30 m/min Infeed roller in front of 1st lower cutter pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment path of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380-420 V), 50 Hz All spindles in IE2 design Electrical equipment according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations not considered.

Stanje: novo, Oprema: osvetlitev, Take your painting process to a new level – with mobile convenience. Mobile spray booths in container design for painting and coating various objects. They are specially designed for mobility, making them easy to transport and set up at different job sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system that prevents the escape of paint mist. The ventilation system ensures that the vapors and particles released during painting are contained within the booth, posing no danger to the surrounding environment. Mobile spray booths are a practical and flexible solution for companies that require a relocatable and efficient painting system, which can be transported from one site to another as needed. Overview of Design and Features Our mobile 20-foot Sapi spray containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The flooring is made from checker plate. Both door wings feature ventilation grilles equipped with fine-pore filter mats. For safety, one door wing is designed as an escape door and fitted with a viewing window. Notably, these are not simply converted shipping containers! We manufacture all our containers from scratch, using only the most durable materials that meet requirements and have been tested and proven to comply with safety standards. Standard shipping containers would not meet the necessary safety standards. Paint Mist Extraction System in the Mobile Spray Container The paint mist extraction wall is mounted in front of the rear wall for the separation of overspray, and is fitted with multi-layer filter mats. The extraction wall consists of a galvanized housing, bent with baffle plates, including various suspension and mounting elements for filter installation. On the container’s exterior, at the rear wall, a powerful and explosion-proof extraction fan with a drive motor is installed on a console. Next-generation Mobile Spray Booths: Meeting EU Requirements and Advancing Coating Solutions Blsdpfx Afeun Shgeqer The new generation of mobile spray booths must comply with the highest EU requirements. The consideration of new coating systems such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints poses significant demands on conventional spray booths. That’s why we have developed a new and unique mobile spray booth for the next generation of coating solutions. An important criterion is the transport of the workpieces for painting and further processing steps. Need more information? Our engineers can provide expert advice and support. Whether you require dry paint mist separation or wet scrubbing, air humidification or air drying, condensation drying at low temperatures or hot air drying—whether pre-treating workpieces by high-pressure washing with a water recirculation system, compressed air blasting, or centrifugal wheel blasting technology.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Dual-shaft multiblade saw mod. SQUALO 420 2x75kW – Refurbished to as-new condition with warranty – €65,000.00 Year: 2018 Technical data: Infeed roller width: 420 mm Bljdpfehrdxiex Afqsr Outfeed roller width: 520 mm Maximum saw group width: 400 mm Maximum cutting height: 200 mm Minimum working length: 800 mm Maximum passage width: 700 mm Saw spindle diameter: 60 mm Maximum circular saw blade diameter: 370 mm Saw blade bore diameter: 80 mm Saw spindle speed: 3,800 rpm Feed speed with rollers: 4–36 m/min Weight: 5,500 – 6,000 kg Dimensions: 2,500 x 2,260 x 2,000 mm (H)

Stanje: novo, Step-by-step coating systems Elboy Industrial Solutions designs and manufactures a wide range of paint shops tailored to your product requirements. With ELBOY, you can use virtual reality during the design phase to navigate your facility, allowing you to make necessary adjustments right from the start, avoiding unexpected results later on. We offer engineering and manufacturing services for various applications, with special focus on environmental protection and occupational safety across all processes, including sandblasting, filling, washing, priming, and topcoating for all product sizes. The 'Step by Step' systems are equipped with overhead conveyors or floor conveyors, and can be configured for any product size. Cabins for sandblasting, chemical washing, pre-coating, drying, filling, top coating, and curing can be seamlessly integrated into the system. To execute each process step-by-step as specified by the system, automatic doors open once the programmed cycle is complete, and the product proceeds automatically to the next process line. Bledpfsdy Dw Ajx Afqjr These fully automated systems are operated via a 15-inch touchscreen and offer comprehensive reporting options—including main computer monitoring, product reporting, results feedback as required, and remote control capabilities. Our paint shops are designed and built by our engineers to meet your capacity, application, and specific operational requirements. Whether you require electrostatic powder coating, wet painting, sandblasting, coating, washing, or similar systems, our solutions deliver maximum efficiency with minimal personnel requirements and the smallest possible footprint.

Stanje: rabljeno, WEINIG Profimat 26 Super Planer and Profiling Moulder Working width: 20 - 230 mm (up to 260 mm) Working height: 8 - 120 mm (up to 140 mm) 5 working spindles, 40 mm spindle diameter Long infeed table (approx. 2000 mm) Main bottom spindle: 4 kW / Left & Right spindles: 7.5 kW each / Top spindle: 5.5 kW / Finishing bottom spindle: 5.5 kW Pneumatic pressure feed rollers Continuous cardan feed: 5 - 24 m/min, stepless adjustment Feed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts CE-certified machine Year of manufacture: 2001 Blodpfx Afswqda Njqor Supplied without tooling Machine is WORKSHOP-OVERHAULED and in GOOD CONDITION Machine is connected and ready for demonstration at the exhibition center Available from stock in Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, premer vretena: 40 mm, delovna višina: 120 mm, število vreten: 6, Planing and Moulding Automatic Four-Side Planer Manufacturer: Weinig Model: Hydromat 23C Blsdpfx Aov T R A Dofqer Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic memory control system Spindle diameter: 40 mm Spindles with double-sided bearings The last two heads are equipped with jointers