Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) Nodpfx Adegwbbqjyewb No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (gantry loader, double station) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electrospindles ISO 30 (each 3.7 kW) with tool magazines with 3 positions each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool holder magazines (revolver) with 56 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor, with turnover unit (180°—top side down) "RBO" Mod. Ribaltatore E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: 2 electrospindles ISO 30 (each 4.5 kW) with 3 tool magazines each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool magazines (chain type) with 60 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit Nwjdpogvdkgefx Adyob 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Unloading station (gantry double station) "RBO" Mod. Advantage SC

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Nwjdpfx Adjgk T Tteyjb Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports Nsdefz Nanjpfx Adyjwb No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), CNC flexible system for drilling and dowel insertion. Machine control: BECKHOFF Consisting of: A) Plate storage ‘Igel’ for loading Nodpfxsm Uyngs Adyewb B) 1st pass-through CNC, model BAT-DTW C) 2nd pass-through CNC, model BAT-DTW D) 3rd pass-through CNC, model BAT-DTW E) 4th pass-through CNC, model BMA-DLS, for drilling, assembly, glue application, and insertion F) Conveyor technology G) Buffer section and RW feed automation, model RWA/RWZ-CNC H) Feeding and turning unit, ZWA-1-CNC I) Body press, model KP-3-CNC L) Conveyor technology / final assembly

Stanje: zelo dobro (rabljeno), PC control type NC 400 Deluxe No. 2 motorized throughfeed conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW) The CNC control manages the movement (X-axis) of the horizontal drilling supports. Nodpfxsrm Ik Te Adyewb The CNC control manages the movement (Y-axis) of the stops. The CNC manages the movement (X-axis) of the transport belts.

Stanje: zelo dobro (rabljeno), Electronic programmer NC 400 Feed-through motorized conveyor belts (No.) 2 Horizontal drilling supports (No.) 2 Drilling units per horizontal drilling support (No.) 2 Spindles per horizontal drilling unit (No.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Nwodpfx Adslwqrtsysb Lower vertical drilling supports (No.) 6 Drilling units per lower vertical drilling support (No.) 2 Upper vertical workpiece clamps (No.) 4 Continuous screws for chip removal (No.) 2 Digital position display (axis) Total connected load (kW) 27.7 The CNC controller manages the movement (X-axis) of the horizontal drilling supports. The CNC controller manages the movement (Y-axis) of the stops. The CNC manages the movement (Z-axis) of all vertical drilling supports.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and with 22 drilling spindles); No. 5 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 5 upper vertical workpiece clamps Nwsdpfxow Uhbks Adysb No. 2 (endless) screws for chip extraction PC control, type CNI O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel insertion devices) No. 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 2 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Contro Open powerTouch, Software: WoodWOP (TAPIO Ready) Infeed Table (panel support) + Outfeed Table (panel support) Panel feed via 3 transport belts Min. workpiece dimensions (X-Y-Z): 250 x 100 x 12 mm Max. workpiece dimensions (X-Y-Z): 2500 x 1050 x 60 mm Special lateral guiding system for workpieces with "sensitive" edges 3 upper vertical pressure devices Powered conveyor belt for waste disposal Integrated electrical and control cabinet Total installed power: approx. 47 kW OPTIONAL: Wireless barcode scanner 2 WORKING UNITS (TOP) – (SERVO MOTOR for X-Y-Z axis): 4 V15 drilling heads (4 x 2.3 kW) each with 15 vertical spindles (total of 60 upper spindles) 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR for X-Y-Z axis): 6 V32 drilling heads (6 x 2.3 kW) each with 32 vertical spindles Njdpfx Aox Aqi Eedyswb (total of 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 H21 drilling heads (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Njdpfx Adsh Ryhnjyjwb Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), PC control system type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min): 35 - 75 Nsdpfx Ajd Nuwiedyewb No. 2 horizontal drilling units Dowel insertion systems (with glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 No. 6 lower vertical drilling units Drilling units per lower vertical drilling unit (No.): 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 continuous screws for chip removal Total connected load (kW): CNC controls movement (X-axis) of horizontal drilling units CNC controls movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW WORKPIECES, min. width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); Nwedpfx Aou Tp Sljdyob - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 6 upper vertical workpiece clamps + No. 2 continuous-feed screws for chip extraction CNC control - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 3 upper drilling supports (each with 2.3 HP drilling heads, with various head configurations); - No. 6 upper vertical workpiece clamps - No. 2 continuous-feed screws for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Nwodovhcbzopfx Adyjb Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Minimum working width (mm): 250 No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), Dvosmerni stroj, ki se lahko postavi v linijo za pretočnim večvrtalnim strojem za avtomatski proces vrtanja in vstavljanja moznikov. - Elektronski programator "CNI" NC 400 - Vgrajena komandna in elektro omarica - Največja razdalja med vodoravnimi glavami pribl. 3200 mm - Premična in nastavljiva desna stran stroja (glede na širino plošč) Nodpfx Asw Ug A Hedyswb - 2 motorizirana transportna trakova (0,25 KM x 2 motorja) - 1+1 rezervoarja za moznike za samodejno podajanje do šob - 6+6 vodoravnih vstavljalnih šob (injektorji za lepilo in pogoni za moznike) - Visokotlačni sistem za dovajanje lepila - Skupna instalirana moč cca 5 kW.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control NC 500 (Software Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal Nsdpfx Ajt Ig A Sedyowb The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20 Nwodeivawpjpfx Adyob

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction Nwedpfxevnq Txo Adyjb

Stanje: zelo dobro (rabljeno), Flexible NC line for drilling, milling and hardware insertion. Nsdpfx Ashvagkjdyewb Numerical control "TPA" Albatros. Consists of: 1) "Igel" loader with 12 positions (for 12 panels), vertical panel feed. 2) Drilling machine, NC pantograph model Over 25.13 with inserter (bushings, shelf support and base). - No. 1 working spindle (approx. 5.5 kW) with turret (10 positions) - No. 1 drill head with 24 independent spindles (X-axis) - No. 1 boring head with 2 independent spindles (Y-axis) - No. 1 drill head with 5 independent spindles (Z-axis) - No. 1 assembly unit (screwing) - No. 1 assembly unit (press fitting) - No. 1 storage and feed hopper 3) Unloading unit (90° transfer), with motorized conveyor for vertical panel discharge. 4) Unloading unit (0°-90°), with motorized conveyor to transfer panels from vertical to horizontal.

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles for each horizontal drilling unit (Qty.): 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip removal belt Digital readout of positioning data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops Njdpfx Adeidqd Tsyowb The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports Nwodpfx Adeidqf Reyob No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), Electronic machine, CNC-controlled, PC control type NC 500 – Tooling System software No. 2 pass-through motorized conveyor belts – feed speed (m/min) approx. 35 - 75 No. 2 horizontal drilling units Drilling spindles per horizontal drilling unit (Qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling units Drilling spindles per lower vertical drilling unit (Qty) 2 x 1.8 HP No. 3 upper vertical drilling units Spindles per upper drilling unit (Qty) 2 x 1.8 HP Nsdpehvi Duefx Adyjwb No. 5 upper vertical workpiece clamps No. 2 endless screws for chip removal CNC controls the movement (X-axis) of the horizontal drilling units CNC controls the movement (Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axis Y1 and Y2) of the drilling spindles CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC control manages all programming of automatic work cycles

Stanje: zelo dobro (rabljeno), PC control unit type NC 400 (with software for managing work cycles) No. 2 continuous motorized conveyor belts Max. working width (mm): 3200 – Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty): 11 No. 4 lower vertical drilling supports Nsdoi D D Tfepfx Adyewb No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit on upper drilling support No. 2 upper vertical workpiece clamps No. 2 screws (continuous) for chip removal Digital display for position data (axes) Total connected load (kW): 25 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops. OPTION: front loader (for narrow parts: min. 60 mm – max. 260 mm)

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH SIZE 1 PRODUCTION - CNC LINE for drilling, milling, and insertion, designed for the manufacturing of fronts. Machine control via NST panel PC W2k (FERRO CAN BUS) Consisting of: A) WORKPIECE LOADING SYSTEM (Infeed Hedgehog Buffer) B) Front Processing Unit (FLEXIBLE Drilling and Insertion) BAT-RTW-CNC With 4 workstations: - Station No. 1: Feeding and positioning of the workpieces (panels). Nwedpfx Ajnvfrpedysb - Station No. 2: Drilling and milling - Station No. 3: Insertion (hinges, adapters, and dampers) - Station No. 4: Releasing and conveyor outfeed of workpieces (panels) C) WORKPIECE UNLOADING SYSTEM (Outfeed Hedgehog Buffer) For processing panels with the following dimensions: - LENGTH: MIN. (194) 270 mm - MAX. 1450 (1500) mm - WIDTH: MIN. (120) 130 mm - MAX. 700 mm - THICKNESS: MIN. 13 mm - MAX. 40 mm

Stanje: zelo dobro (rabljeno), Flexible N.C.-Automatiklinie zum Bohren, Fräsen und Einsetzen (Beschläge). Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Stachelmagazin (Puffer) für 18 Positionen KZ2047) Übergabestation mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 Nedjidmkrspfx Adyowb KZ2049) Übergabestation mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabestation mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabestation mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn ebenfalls mit motorisierten Bändern (zum Wenden der Platten um 180° zur Weitergabe an die Montagelinien)

Stanje: zelo dobro (rabljeno), Vrtalni stroj, vrtalni stroj za stružene elemente Triade Nedpfx Aox Dra Uodyjwb Število vrtalnih agregatov: 3