Vrtalni stroj z več vreteni

Maggi Engineering Boring System 21

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders Bodpfx Ahjd Supgs Tjwr - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm Bjdpfjv Erkasx Ah Tewr T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: skoraj kot novo (rabljeno), obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DATA Number of spindles: 21 Distance between first and last drill bit: 640 mm Distance between spindle centers: 32 mm Maximum workpiece size: 50 x 915 x 3000 mm Maximum drilling depth: 65 mm Number of pneumatic hold-downs: 2 Working table height (drilling machine): 860 mm Maximum hold-down height above table: 70 mm Operating pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at angles from 0° to 90° - Pneumatically adjustable drilling head angle - Cast iron stops - Spindles suitable for quick couplings - Patented pneumatic workpiece clamps - Cast iron working table - Fast and accurate adjustment Bedpey At Ndofx Ah Tjwr - Precise drilling - Italian manufacture Standard equipment: - 2 aluminum measuring rails, each 1.5 m (right and left) with two stops - 5 quick couplings - Wooden transport crate for machine protection during transport ADVANTAGES - Drilling vertically/horizontally/at an angle - Multi-spindle drilling machine - New device - CE certificate - Robust - Professional Net price €2950.- Machine shipping not included Packaging included Net prices apply for international transactions and EU customers with valid EU VAT ID.

Stanje: rabljeno, Leto izdelave: 2024, STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vrst lukenj. Bjdexnlflspfx Ah Towr - Vpenjalne roke za nosilec vpenjala, zasnovane za pozicijo vrst lukenj do največ 300 mm. - Idealen tristopenjski sistem orodij. - 1 komplet svedrov za vrtanje lukenj za moznike: - 5 karbidnih svedrov za moznike, Ø 8x77 mm, desno - 4 karbidnih svedrov za moznike, Ø 8x77 mm, levo. Osnovni stroj: STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. - Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vr

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm ± 20 mm - Operator side: left - Spray gun drive: single version - Dry extraction system - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h Bodpfxov N D Ewo Ah Tswr - Paper belt transport system - Feed speed continuously adjustable: 1.5 – 7 m/min - PLC control with touch screen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: ~7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as training for your personnel. On request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Stanje: rabljeno, Leto izdelave: 1998, Rabljeni stroj Letnik izdelave: 1998 Stanje: dobro vzdrževan (šolski stroj) Oprema: Rezkalna enota 5 kW Valjasto vpenjalo 25 mm s priteznim ključem Vrtalna enota 1,5 kW z 19 vreteni Križna glava s 4 vrtalnimi vreteni Žagalna enota se lahko zasuče iz X na Y os. Svetlobne pregrade v sprednjem delu Računalnik nov leta 2015 Operacijski sistem Windows 98 Weeke - programska oprema Woodwop 4.0 Bwedjxqihcepfx Ah Tjr Tehnični podatki: Pomik X: 3455 mm Pomik Y: 1480 mm Pomik Z: 260 mm Zunanje mere: Dolžina: pribl. 6115 mm Globina: pribl. 3660 mm Lokacija: Röllbach Razpoložljivost: takojšnja

Stanje: novo, Technical specifications: Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 290 mm Saw spindle diameter: 30 mm Scoring blade diameter: 90 mm Scoring spindle diameter: 22 mm Manual adjustment of saw blade height Tilting saw blade from 0° to 45° Manual adjustment of saw blade tilt angle Carriage length: 2200 mm Carriage lock Table extensions Extraction port diameter: 120 mm Rip fence with 2 stops Eccentric clamp Guard Safety switch Motor power: 4 kW Power supply: 400 V Bodpfx Ahehqxx De Towr Manufacturer: SEGA Brand new machine Overall dimensions: Length: 2200 mm Width: 2900 mm Height: 1150 mm

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: Bwedshknbrjpfx Ah Ter - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Stanje: zelo dobro (rabljeno), Briketirka POR Oscar 9kW Povprečna proizvodnja briketov: 130-180 kg Premer briketa: 70 mm Bodpfx Ajxdahysh Tewr Moč motorja: 9 kW Premer vstopnega lijaka: 1170 mm Tehnična dokumentacija CE oznaka Teža stroja cca. 800 kg

Stanje: rabljeno, prevoženi kilometri: 203.016 km, moč: 96 kW (130,52 KM), prva registracija: 12/2015, vrsta goriva: dizel, skupna masa: 3.000 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, število sedežev: 3, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, 3-seater, power steering, driver airbag, 6-speed manual transmission, tachometer, power steering, electric windows, on-board computer, electric exterior mirrors, centre armrest, Euro 5, rear wing doors, central locking with remote control, and more. Subject to errors, prior sale, and typographical mistakes. Bsdjwqua Tepfx Ah Tjwr Sale only to traders and for export. !!!! Chassis no.: 70715 !!!! Key no.: 89 !!!!!