Vrtalni stroj

FLOTT Tb 13 St

Stanje: pripravljen za uporabo (rabljen), Masina de găurit Flott TB 13 ST, mașină de găurit de banc - Masă de prindere: 225 x 295 mm - Prindere ax: cu mandrină de găurit - Braț liber: 185 mm - Turații: 400-5000 rpm - Coloană: diametru 60 mm - Cursă ax: 60 mm, cursă de adâncime cu reglare fină - Putere motor: 0,5 kW - Dimensiuni: 380mm x 225mm x 745mm (L x l x Î) - Greutate: 50 kg Puteți veni oricând pentru o vizionare. Tjdpfx Absxzbylegjf Putem organiza transport la preț avantajos pentru dumneavoastră! Veți primi o factură corectă. Pentru clienții străini se poate emite și factură netă. Este necesar un cod TVA valid. Ne rezervăm dreptul de vânzare anticipată. Vizitați magazinul nostru și descoperiți și celelalte oferte ale noastre. Denumirile de firme și mărcile menționate aparțin proprietarilor lor și sunt folosite doar pentru identificarea și descrierea produselor. Pot apărea abateri de la datele tehnice sau erori în descrierea produsului, acestea fiind rezervate.

Leto izdelave: 1994, Stanje: dober (rabljeno), Ziersch & Baltrusch Surface Grinding Machine - Equipped with Formmaster 6 / 30 - Equipped with belt filter system - Equipped with coolant system - Width: 250 cm - Depth: 200 cm Tsdjk Ixl Aepfx Abgef - Height: 220 cm Machine is in good condition and fully operational; it can be inspected and tested under power on site. Shipping also possible abroad. Inspection: Please note that, to avoid any misunderstandings, the item can and should be inspected and tested under power prior to purchase. Please ask any questions before purchase to avoid uncertainties. For general enquiries or to arrange an inspection appointment, I am available anytime via the phone number listed below or above. Subject to prior sale and errors in description. VAT will be itemized separately on my invoices. Shipping via freight forwarder.

Stanje: rabljeno, TECHNICAL DATA - Spindle speed: 400 - 4,500 [rpm] - Drilling capacity in steel / cast iron: 10 / 13 [mm] - Drilling depth: 60 [mm] Tsdpfouhabtjx Abgjf - Spindle to column distance: 185 [mm] - Usable table area: 220 x 300 [mm] - Motor power: 0.5 [kW] - Power supply: 220 [V] - Speed selection via display of drill diameter and material - Electronic spindle speed control - Infinitely variable spindle speed adjustment from 400 to 4500 rpm - Constant speed under load - Adjustable drill head height through pneumatic balancing device - Fine depth adjustment through graduated vernier scale - Electronic motor protection - Fully machined base plate (220 x 300 mm)

Leto izdelave: 1986, Stanje: rabljeno, Bench Drill, Pedestal Drill, Column Drill, Pillar Drill Tsdpog D H A Refx Abgsf - Manufacturer: Flott, Bench Drill Type TB 13 St - Table Size: 225 x 295 mm - Spindle Mount: with drill chuck - Throat Depth: 185 mm - Speeds: 400–5,000 rpm - Column: Diameter 60 mm - Spindle Stroke: 60 mm, depth stroke with fine adjustment - Motor Power: 0.5 kW - Voltage: 220 V - Dimensions: 380/225/H745 mm - Weight: 50 kg

Stanje: potreben popravila (rabljeno), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping area of table: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Longitudinal feed rate: 6.3 to 1,250 mm/min Cross feed rate: 6.3 to 1,250 mm/min Power supply: 7.4 kW Accessories/Equipment: Vertical head Tjdpfx Abed Hl Stsgef Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Stanje: novo, High-quality bench drilling machine with top equipment. FLOTT TB 15 Plus (212755) Standard Features: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically inclined front - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Emergency stop push button - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with Schuko plug - 3-year warranty for single-shift operation Technical Data: Spindle: MT II Drilling depth (mm): 70 Tapping capacity (depending on pitch): M12 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Locking ring (positive engagement) Feed (mm/rev): manual Table height adjustment: rack and pinion Motor, three-phase – frequency controlled, supply 230 V (kW): 0.75 Continuous/standard drilling capacity (mm): 15/18 (in E335/ST60) Throat (mm): 220 Column diameter (mm): 70 Usable working surface (W x L) (mm): 300 x 250 Spindle/working surface distance (mm): 85-370 (table), 420 (base) T-slot size (arm), spacing (mm), width (mm): Cross-slots, quantity 2, 14/26 Spindle speeds stepless (rpm): 40 – 4000 Machine dimensions without packaging (mm): 400 x 520 x 850 Machine dimensions with packaging (mm): 452 x 700 x 1,130 Weight (kg): 65 Note: All other models can be requested from us. Tsdpfx Aoi Hp D Aobgjf

Stanje: novo, Leto izdelave: 2023, številka stroja/vozila: PRJ065958, ALZMETALL Bench Drill Press, Drilling Capacity in Steel: 16mm Short Taper Spindle MK2, Spindle Travel: 80mm, Throat Depth: 190mm, Column Diameter: 65mm, Machine Table Usable Surface: 300x240mm, with T-slots 2 x 12mm x 80mm, Distance Spindle to Table min./max.: 75/357mm, Table Height Adjustment by Hand Crank, Machine Table Base Plate, Usable Surface: 300x240mm, with T-slots 2 x 12mm x 80mm, Distance Spindle to Base Plate min./max.: 437/437mm, Manual Feed, Machine Height without Options: 825mm, Net Weight: 83 kg. - Stepless speed regulation: 100-2000 rpm Standard Equipment: 5" TFT - LCD display with touch function: Manual input of target spindle speed, real-time speed display, integrated drilling depth indicator with touch reference point reset, virtual drilling depth scale in the display, machine status displays and warning notifications, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC Motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, Three separate push buttons for forward, reverse, and stop, Spindle holding via brake function, spindle guard with electrical interlock, lockable main switch, mushroom-type emergency stop push button (latching), stepless speed adjustment via potentiometer, IP54 protection class, spindle guard with electrical interlock, finish: DD texture paint, signal white RAL 9003, PANTONE 7545c, black Todpfelubw Ijx Abgof Incl. the following options: LED work light Pos. 12. Delivery time: ex stock Waiblingen Beinstein

Leto izdelave: 1986, Stanje: zelo dobro (rabljeno), Dimensions (LxWxH): approx. 450 x 300 x 1700 mm Maximum drilling depth: 60 mm Maximum workpiece height: 350 mm Table dimensions: 250 x 250 mm Speed range: 430 – 9,000 rpm (12 speed levels) 2 motor stages Speed adjustment via V-belt Includes drill chuck Includes 16 A plug Todpfx Absh Dimysgef Includes stand/base frame

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 331/43, Drilling capacity: 3 mm Tedpfxofnbgqj Abgof Throat depth: 100 mm Spindle speeds: 6300 and 9000 rpm Drive motor: 380 V, 0.18 kW Dimensions (L x W x H): 470 x 250 x 520 mm Weight: 39 kg

Stanje: novo, High-quality bench drilling machine with top-class features. FLOTT TB 13 Plus MK II (212503) FLOTT TB 13 Plus B 16 (212500) Standard Features: - Tapping device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically inclined front - LED illumination - Quick-adjust, ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Emergency stop push button - Thermal overload protection - Spindle stop Tsdei Hpyqjpfx Abgef - Drill guard with electric interlock - Power cable with Schuko plug - 3-year warranty for single-shift operation Technical Data: Max. drilling depth (mm): 60 Thread cutting capacity (depending on pitch): M10 Speed display: Digital Drilling depth display: Digital Drill depth stop: Clamping ring (positive fit) Feed (mm/rev): Manual Table height adjustment: Rack and pinion Motor 3-phase – frequency controlled, power supply 230 V (kW): 0.54 Continuous/normal drilling capacity (mm): 13/15 (in E335/ST60) Throat (mm): 220 Column diameter (mm): 70 Usable worktable surface (W x L) (mm): 300 x 250 Spindle/worktable distance (mm): 85-370 (table), 420 (base) T-slot size (arm), spacing (mm), width dimension (mm): Cross slots, quantity 2, 14/26 Machine dimensions without packaging (mm): 400 x 520 x 850 Machine dimensions with packaging (mm): 452 x 700 x 1,130 Weight (kg): 62 Note: All other models are available on request.