Prehodne vrtalne stroje nakup rabljenega (60)

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° Godpedfgg Ijfx Ab Tekf C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) Gkjdsdg Itnopfx Ab Tsf High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: zelo dobro (rabljeno), Double-sided working machine Can be positioned after a through-feed drilling line (for the automatic processing cycle of drilling and doweling) Electronic control unit – Programmer RT 486 Through-feed motorized conveyor belts (No.) 2 Horizontal boring supports (No.) 2 Dowelling systems (and glue injection units) No. 6 LH + 6 RH Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) Lower vertical boring supports (No.) 4 Gkjdpfxedi R R Ro Ab Tef Drilling units per lower vertical support (No.) 2 x 1.8 HP Upper vertical workpiece clamps (No.) 2 Total connected load (kW) 11.5

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Gsdpfx Asdz Uk Tob Tjkf Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. Gjdpfx Abjd Nviqe Tekf - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Stanje: zelo dobro (rabljeno), Horizontal boring supports (qty.) 1 (adjustable / rotatable 0° - 180°) Boring units per horizontal boring support (qty.) 1 Spindles per horizontal boring unit (qty.) 29 Max. working width (mm) approx. 1000 Gkedpfehgbhcex Ab Tjf Upper vertical workpiece clamps (qty.) 3 Total connected load (kW) approx. 3

Stanje: zelo dobro (rabljeno), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps + 2 (endless) screw conveyors for chip removal J06032) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) Godpfx Aeg Urn Eob Tskf - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal J06033) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 4 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 4 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC Control (Tooling System software + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the feed conveyors

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Godegwbbqjpfx Ab Tjkf Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Gsdpfx Aogk T Ttjb Tokf Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (gantry loader, double station) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electrospindles ISO 30 (each 3.7 kW) with tool magazines with 3 positions each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool holder magazines (revolver) with 56 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) Gkodpfxjgvdkgs Ab Tsf D) Transfer conveyor, with turnover unit (180°—top side down) "RBO" Mod. Ribaltatore E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: 2 electrospindles ISO 30 (each 4.5 kW) with 3 tool magazines each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool magazines (chain type) with 60 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Unloading station (gantry double station) "RBO" Mod. Advantage SC

Stanje: zelo dobro (rabljeno), Electronic control RT 483 Gksdpfx Abofz Nans Tef No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), PC control type NC 400 Deluxe No. 2 motorized throughfeed conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW) The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops. The CNC manages the movement (X-axis) of the transport belts. Gederm Ik Topfx Ab Tekf

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and with 22 drilling spindles); No. 5 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 5 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction PC control, type CNI Gedpfx Aow Uhbkob Tokf O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel insertion devices) No. 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 2 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), Electronic programmer NC 400 Feed-through motorized conveyor belts (No.) 2 Horizontal drilling supports (No.) 2 Drilling units per horizontal drilling support (No.) 2 Spindles per horizontal drilling unit (No.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (No.) 6 Drilling units per lower vertical drilling support (No.) 2 Upper vertical workpiece clamps (No.) 4 Continuous screws for chip removal (No.) 2 Digital position display (axis) Total connected load (kW) 27.7 The CNC controller manages the movement (X-axis) of the horizontal drilling supports. Gjdslwqrtopfx Ab Tjkf The CNC controller manages the movement (Y-axis) of the stops. The CNC manages the movement (Z-axis) of all vertical drilling supports.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Contro Open powerTouch, Software: WoodWOP (TAPIO Ready) Infeed Table (panel support) + Outfeed Table (panel support) Panel feed via 3 transport belts Min. workpiece dimensions (X-Y-Z): 250 x 100 x 12 mm Max. workpiece dimensions (X-Y-Z): 2500 x 1050 x 60 mm Special lateral guiding system for workpieces with "sensitive" edges Gedpfx Abex Aqi Ee Tjkf 3 upper vertical pressure devices Powered conveyor belt for waste disposal Integrated electrical and control cabinet Total installed power: approx. 47 kW OPTIONAL: Wireless barcode scanner 2 WORKING UNITS (TOP) – (SERVO MOTOR for X-Y-Z axis): 4 V15 drilling heads (4 x 2.3 kW) each with 15 vertical spindles (total of 60 upper spindles) 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR for X-Y-Z axis): 6 V32 drilling heads (6 x 2.3 kW) each with 32 vertical spindles (total of 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 H21 drilling heads (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Stanje: zelo dobro (rabljeno), PC control system type NC 400, Biesse software Gsdpfod Nuwijx Ab Tekf No. 2 throughfeed motorized conveyor belts Feed speed (m/min): 35 - 75 No. 2 horizontal drilling units Dowel insertion systems (with glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 No. 6 lower vertical drilling units Drilling units per lower vertical drilling unit (No.): 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 continuous screws for chip removal Total connected load (kW): CNC controls movement (X-axis) of horizontal drilling units CNC controls movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Gedpfsh Ryhnsx Ab Tokf Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW WORKPIECES, min. width 100 mm Gjdpsu Tp Slsfx Ab Tokf W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 6 upper vertical workpiece clamps + No. 2 continuous-feed screws for chip extraction CNC control - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 3 upper drilling supports (each with 2.3 HP drilling heads, with various head configurations); - No. 6 upper vertical workpiece clamps - No. 2 continuous-feed screws for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Gedpfx Abevhcbzo Tjkf Minimum working width (mm): 250 No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), Dvosmerni stroj, ki se lahko postavi v linijo za pretočnim večvrtalnim strojem za avtomatski proces vrtanja in vstavljanja moznikov. Gjdpfx Abjw Ug A Ho Tekf - Elektronski programator "CNI" NC 400 - Vgrajena komandna in elektro omarica - Največja razdalja med vodoravnimi glavami pribl. 3200 mm - Premična in nastavljiva desna stran stroja (glede na širino plošč) - 2 motorizirana transportna trakova (0,25 KM x 2 motorja) - 1+1 rezervoarja za moznike za samodejno podajanje do šob - 6+6 vodoravnih vstavljalnih šob (injektorji za lepilo in pogoni za moznike) - Visokotlačni sistem za dovajanje lepila - Skupna instalirana moč cca 5 kW.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control NC 500 (Software Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal Gedpfxst Ig A So Ab Tokf The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), Flexible NC line for drilling, milling and hardware insertion. Numerical control "TPA" Albatros. Consists of: 1) "Igel" loader with 12 positions (for 12 panels), vertical panel feed. 2) Drilling machine, NC pantograph model Over 25.13 with inserter (bushings, shelf support and base). - No. 1 working spindle (approx. 5.5 kW) with turret (10 positions) - No. 1 drill head with 24 independent spindles (X-axis) - No. 1 boring head with 2 independent spindles (Y-axis) - No. 1 drill head with 5 independent spindles (Z-axis) - No. 1 assembly unit (screwing) Gedpfx Aehvagkeb Tokf - No. 1 assembly unit (press fitting) - No. 1 storage and feed hopper 3) Unloading unit (90° transfer), with motorized conveyor for vertical panel discharge. 4) Unloading unit (0°-90°), with motorized conveyor to transfer panels from vertical to horizontal.

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports Gkedpoidqf Refx Ab Tjf No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Gkodpfx Aeivawpsb Tjf Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) Gksdpevnq Txofx Ab Tof - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction