Dolgočasno Vstavljanje stroj

BIESSE Techno SVBL/J

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Cyklop XZE-311 Strapping Press Year of manufacture: 2003 Passage width: max. 2200 mm Passage height: max. 2200 mm Hfodpstqpadofx Ab Eed Strap guide spacing: 625 / 440 mm Roller pitch: 60 mm Strapping speed: 2.9 m/s Strap tensioning force of strapping unit: adjustable up to 2000 N Pressing force: adjustable from 5 to 48 kN

Leto izdelave: 2001, obratovalne ure: 123 h, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Hodpfx Abjftdv Uo Eofd Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Stanje: novo, Leto izdelave: 2026, Za profesionalno in natančno doziranje količine lepila v izvrtinah za moznike in utorih zadnjih sten. Kratek opis: • Vedno enaka in pravilna količina lepila • Ni potrebno naknadno čiščenje obdelovancev zaradi preveč lepila Hfjdpjdxz Tpefx Ab Eod • Enostavno in minimalno čiščenje lepilnega sistema (1x tedensko, prek programa za izpiranje) • Prihranek pri stroških lepila • Ergonomska in lahka lepilna pištola v primerjavi z lepilnimi steklenicami • Hitrejše in natančnejše delo v primerjavi z lepilnimi steklenicami

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 Hfodpfx Abjilqvrj Eed The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): Hjdpfx Abogwbbqe Ejfd No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: novo, Leto izdelave: 2025, The Multiblade or Single-shaft Multiblade Circular Saw SQUALO 515 in the LM version features an advanced system of movable blades. The machine is equipped with powered feed rollers on the worktable and powered top pressure rollers, ensuring effective all-wheel drive traction for precise and continuous transport of wood materials. Hfedpfx Abshpbxij Eed In the LM (Movable Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three movable blades. These can be dynamically positioned to accommodate various edging and multiple cutting requirements. A distinguishing feature of this model is its expandable cutting capacity: by utilizing special arbors, the number of blades used simultaneously can be increased to up to six. It is important to note that blades mounted on these special arbors operate at a predetermined fixed distance, enabling the efficient production of components with standardized widths. This versatility allows the machine to easily switch from tasks requiring flexible blade positioning to series production with fixed cutting intervals.

Stanje: novo, Panel Saw HOLZ-HER 1255 SECTOR pro - Showroom Machine - Cutting Height: 2,200 mm Cutting Length: 5,300 mm Vertical Precision by HOLZ-HER HOLZ-HER's vertical panel saws combine proven technology from over 50 years of experience with a fundamentally robust construction, providing you with an exceptional price-performance ratio. Your advantages: - Completely welded frame for extremely high rigidity - Precise cutting quality - Finished cuts ready for immediate edge-banding - Powerful saw motor with 4 kW output - Space-saving panel sizing with a footprint starting at just 4 m² - Smooth and ergonomic operation TRK Extraction (mandatory in all CE-countries – optional): Workstations must meet the highest requirements for health and safety. HOLZ-HER saws are among the cleanest and safest in the world. Hfjdpfx Abeu R Syie Ejd Accessories The extensive range of accessories includes convenient digital measuring displays up to our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting board-shaped wood-based materials such as chipboard, MDF panels, veneered panels, multiplex, etc. Base Machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/saw unit for accurate cutting. Manual feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw Beam: Sturdy saw beam guided on precision rails. Pneumatic locking of the saw beam at top and bottom. Electrically monitored for vertical cuts. Saw Unit: Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded back in the upper position for precise engagement. Generously sized levers for easy swiveling. The cover opens the entire saw unit for quick tool changes, including ProLock quick-release chuck. View Slot: Riving knife can be retracted. Control Panel: Efficient machine operation. Ergonomically mounted at eye level. Lower Workpiece Support: Stable, wear-free stainless-steel support. Support up to cutting line: Narrow workpieces cannot tip or fall through. Extraction: Efficient extraction system with two connectors: Saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lift Roller Transport System: Manually liftable and lowerable rollers for easy and material-friendly panel transport. Measuring Tape: For indication of horizontal cut with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Serial cuts from the panel upper edge This offer is for an equipment package. The following items and options are included in the price: - Shifting grid - Manual longitudinal stop for vertical cuts - Digital measurement display for horizontal cuts - 3 adjustable stop points in the saw beam - TRK SH 2,200 extraction system - Strip stop for repeat horizontal cuts - New showroom machine -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Kolbus AutoBox AB leto 2019 stroj za proizvodnjo škatel enostavno upravljanje servo nadzor hitro menjavanje del primeren za valovite škatle omogoča proizvodnjo škatel po naročilu MC MultiCut modul Hedsx El N Ijpfx Ab Ejfd PR modul številne vrste škatel (FEFCO) biganje, prečno in vzdolžno rezanje, rezanje vključno z različnimi napravami (lepilo, novi noži) izhodni del pripravljen za uporabo dobro ohranjen takoj na voljo

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Hfedpfx Abevwbp As Ejd

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 145 mm, največja širina rezanja: 510 mm, skupna masa: 400 kg, premer ekstrakcijske šobe: 150 mm, vrtljajska hitrost (min.): 2.800 obr/min, moč: 5,5 kW (7,48 KM), STROMAB PS 50/F Crosscut Swing Saw - Brand NEW Specification: Hfedjrdwm Topfx Ab Eed • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor shaft diameter: 30 mm • Motor speed: 2,800 rpm • Max. cutting width: 510 mm • Max. cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • CE compliant Additional information: • The tables shown in the pictures are included with the machine (2 x 2.0 m) • Available within 7–10 working days • Price does not include VAT or transport costs