AVTOMATSKA POPOLNA VRTALNA LINIJA

BIESSE + RBO Techno FDT (2) + Winner (2)

Stanje: dober (rabljeno), Leto izdelave: 2003, Ref. No.: 10618 Manufacturer: KELLENBERGER Model: 600 U No. 33 Year of Manufacture: 2003 Djdpfx Aoya Dagjpwsku Control Type: Conventional Control System: n/a Location: Halberstadt Country of Origin: Switzerland Distance Between Centres: 600 mm Centre Height (standard): 125 mm Centre Height with Elevated Work Blocks on Headstock and Tailstock: 175 - 250 mm Swing Diameter with Lifting Blocks max.: 350 - 500 mm Table Swivel / Each Side: 10° Dwell Time for Table Reversal: 0 - 5 seconds Diameter / Width / Bore: 250 x 13 x 76 mm Grinding Wheel Spindle Speeds: 1500 / 1700 / 2200 / 3600 rpm Grinding Head Swivels: 360° Cross Travel of Grinding Head: 285 mm Rapid Traverse of Wheel Head: 40 mm Intermittent Feed per Table Reversal: 0.001 - 0.03 mm/diameter Micro Feed Dial Graduation: 0.001 mm / Ø Infinitely Variable Work Speeds (normal / special): 20-400 / 10-400 Max. Grinding Length: 900 mm Additional Information: The machine can be inspected under power.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Zmogljivost za pelete premera 6 mm: 2,5–3 t/h. Uporabljali smo ga približno 5 let. Kupljen je bil rabljen, a v zelo dobrem stanju. Vsa ležaja so bila zamenjana pred 1 letom. Pred razstavitvijo je deloval zelo dobro. Za dodatno doplačilo je na voljo tudi nova matrica z valji. Za dodatne informacije pišite na Whatsapp. Dodpfsx S Ibgjx Apwsku

Stanje: rabljeno, številka stroja/vozila: IDC000031, Барабан для сушки щепы Длина — 14 м Ширина — 3,6 м Производительность сушки — 10 т/ч Dodpfxsrl Ra Hj Apwoku

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: Dedpfx Aedt Rgvjpwoku VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: rabljeno, Leto izdelave: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will be in operation until the end of September 2023 and can be inspected at any time. Technical data - Max. capacity: 120 pallets/hour (at 10 wraps) - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame made of steel - Rotary ring with dispenser for pre-stretch film - Motorized pre-stretch system - Cutting and sealing system Scope of delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016 Dedpfx Apel Uyfkjweku

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot No operator panel + connection cables Used, untested robot. No teach pendant. Not tested. Dodpogu U Itsfx Apweku

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Dkodpfx Apsiidm Noweu Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Dkedpfx Apsvllxdjwou Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 5 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Dolžina poravnalne mize: 2500 mm Pogonski motor podajalnika: 4 kW Hitrost podajanja: 5–30 m/min Krmiljenje: spominska funkcija Weinig Powermat 400 s HSK/Powerlock, CNC-osno/radialno krmiljenje ----- Stroj je trenutno pri nas v postopku obnove! Slike pred demontažo in trenutno v procesu obnove! Kratek povzetek: ----- - 5 vreten s 8.000 obr/min - 4 x HSK/Powerlock - CNC-nastavitve vreten v osni in radialni smeri preko krmiljenja - CNC-krmiljena nastavitev in pozicioniranje podajalnika - Mizne plošče z vodilnim nožem pri vretenih 2 in 3 - Vključno s povratnim sistemom Weinig/Neumann RF 15 Podroben opis: ----- Tehnični podatki: Delovna širina: 20–230 mm Djdpfoyy A Iqjx Apwjku Delovna višina: 8–120 mm 1. Nastavek za orodje – spodaj ----- Motor z zavoro: 5,5 kW Premer vretena: 40 mm Obratov: 6.000 obr/min Krog gibanja noža: 93–145 mm Nastavitev osi: 5 mm Zaoplitvena enota MarathonCoatin za mizno vlogo pred 1. spodnjim nastavkom za orodje 2. Nastavek za orodje – PowerLock – desno ----- Motor z zavoro: 7,5 kW Skupni motor z levim nastavkom za orodje Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. premer orodja za ravnilno mejo: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno osno CNC-krmiljeno Mizne plošče z vodilnim nožem 3. Nastavek za orodje – PowerLock – levo ----- Motor z zavoro: skupni motor z 2. vretenom Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno CNC-krmiljeno v osni in radialni smeri Mizne plošče z vodilnim nožem 4. Nastavek za orodje – PowerLock – zgoraj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Krog gibanja za ravne rezilne glave maks.: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 40 mm Deljena pritisna noga pred zgornjim nastavkom za orodje, nastavljiva po krogu gibanja orodja in zložljiva, vzmetena. Pritisna noga pred in odvod po zgornjem nastavku z elektronskimi digitalnimi prikazi, integrirani v spominsko funkcijo Vreteno radialno CNC-krmiljeno 5. Nastavek za orodje – PowerLock – spodaj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Maks. globina profiliranja: 15 mm Nastavitev osi: 35 mm Podajalni sistem ----- Frekvenčno krmiljen podajalnik, brezstopenjsko nastavljiv z zavoro: 4 kW, 5–30 m/min Vlečni valj pred 1. spodnjim orodjem pnevmatsko dvig/nizko krmiljen Durofer valji s koničastimi zobmi (Weinig patent) z omejevalnikom globine in samoočiščevalnimi...

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) Dksdpfogwbbqox Apwju No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)