Stroj za neprekinjeno vrtanje

WEEKE (HOMAG GROUP) BST 500 Optimat

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) Gbsdpsivawpofx Adker No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, double tenoning and double drilling machine, step-by-step Equipped with: 1+1 saw units 1+1 milling units 1+1 drilling units Gsdpow A A E Isfx Adkobr Maximum length: 2500 mm

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: Gbsdsdt Rgvepfx Adkor VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Zapiralna sila: 110 t Premer polža: 22 mm Volumen vbrizga: 41 cm3 Razmerje L/D polža: 20 Izračunan delovni volumen: 41,8 cm3 Pravi vbrizgalni tlak: 2.864 bar Najv. vrtljaji polža: 500 min Polžni moment: 150 Nm Kontaktna sila šobe: 250/40 mm/kN Gbsdpsu Eki Sofx Adkjr Zunanji tok vbrizga: 76 cm3/s Grelna moč cilindra: 6,3 kW Število grelnih con: 4 Tip: Horizontalen Pogon: Električni

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Teža: 2,2 t Stružnica za les +++++ Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Gbsdpsk Sat Dsfx Adker Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: novo, Leto izdelave: 2026, CNC stroj za vrtanje in vstavljanje moznic za popolnoma avtomatsko vrtanje, lepljenje in vstavljanje moznic. Center za vrtanje in obdelavo moznic s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: • Univerzalni CNC krmiljen stroj za vrtanje in vstavljanje moznic • Nadzor brizganja lepila prek GIC • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatna horizontalna in vertikalna vrtalna vretena • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev strojem za razrez po gnezdenju Gjdpfxjdx Axfe Adkebr

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions Gbedpsuhav Dofx Adkjr - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Vertikalna blokovna forma: KURTZ mod. MFV (4920 x 1274/1000 x 1240 mm) Gbjdpfx Adeucvq Hskjr Osnovni podatki: • Leto izdelave: 2005 • Dimenzije bloka (VxŠxD): 4920 x 1274/1000 x 1240 mm • Obratovalna napetost: 3x400V 50Hz • Priključna moč: 77 kW • BLOKOVNA FORMA s pomično stransko steno • Popoln vakuumski sistem (VACUUM SYSTEM GARDNER DENVER/SIEMENS) • Hidravlični sistem REXROTH-BOSCH • Operativni silos za predhodno nalaganje blokovne forme z odpraševalnim sistemom • PLC krmilnik Siemens in kontrolna plošča na dotik HMI Siemens – zamenjana z NOVIMA leta 2019, izvajen tudi UPGRADE krmilnega programa • Panel na dotik SIEMENS TOUCH SCREEN (zamenjan za NOVEGA, z večjim zaslonom) • Tiskalnik za označevanje/datiranje blokov MATTHEWS • Sistem za iznos blokov z zalogovnikom blokov • Popolna dokumentacija • Stanje: ODLIČNO Možno je prilagoditi maksimalno višino bloka npr. na 4550-4600 mm.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 3.500 kg, vrsta goriva: dizel, lastna masa: 5.416 kg, skupna dolžina: 4.540 mm, vrsta pogona: Diesel, Tip droga: Noben Tehnično stanje: Novo Tip sprednje pnevmatike: Pnevmatska Gedpfx Adoxgkncskjbr Velikost sprednje pnevmatike: 16/70-20 Tip zadnje pnevmatike: Pnevmatska Velikost zadnje pnevmatike: 12-16,5 CE certifikat,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. Gbjdpfxjx Sxfve Adksr The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.