CNC obdelovalni center

Deckel Maho DMF 250 linear

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 18.700 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik, obremenitev mize: 3.100 kg, skupna masa: 24.500 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 35.000 W, teža orodja: 6.000 g, število osi: 3, This 3-axis DECKEL MAHO DMF 250 Linear was manufactured in 2005. It is a robust vertical machining center featuring a high-speed main drive up to 40 kW and rapid traverses of 100 m/min on the X-axis and 60 m/min on the Y- and Z-axes. The worktable measures 3,100 × 900 mm and offers a load capacity of 3,100 kg. If you are looking for a high-quality milling machine, the DECKEL MAHO DMF 250 Linear we are offering for sale is worth considering. Please contact us for further information. Additional Equipment • Safety features: Monitored and interlocked work area door; key switch for normal and setup mode; limited functions when the door is open Machine Benefits Technical advantages of the machine: • Feed rate: up to 20,000 mm/min • Clamping surface: 3,100 × 900 mm • T-slots: 9 slots, 100 mm spacing • Tool magazine capacity: 30 slots • Measuring system resolution: 0.001 mm • Electrical connections: power supply 3N/PE~400/230 V, 50/60 Hz; power consumption 82 kVA Fodpfxjx Nr Tuj Af Ssga • Pneumatics: compressed air 5.5–8 bar; air consumption 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29,280 kg Additional Information Ambient temperature: +15°C to +35°C Humidity: 20–75% Tool magazine size 120 Magazine cabinet Tool change via shuttle Tool holders only on request and depending on availability (extra) Machine is a 3-axis machine (rotary table not available) Further configuration or documentation is no longer available. Z-axis brake defective, roller door in machine room defective, display cable defective, display defective (intermittent fault).

Stanje: novo, Extraction capacity at nozzle* (Filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Sound level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and fumes, suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC standard (digital filter control) - Electronically controlled EC-fan as standard - Adjustable speed and air output - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air performance options - Adaptable to pollutant load and air performance requirements - Large range of installation and connection accessories - Quality made in Germany Fodpfx Afsh Rdwxe Sega The ELBARON® filter series has been designed for use in metalworking operations with pure oil as well as for the separation of oil mist and fumes (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have ranked among the most efficient filter units on the market and are in use worldwide. Our filter units are already supplied with digital control as standard and can, for example, be operated via laptop. The ELBARON® product series includes 18 device variants and can be optimally configured for your application in both size and capacity. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiency, long service intervals and trouble-free operation from an economic perspective.

Stanje: rabljeno, obratovalne ure: 18.001 h, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 920 mm, pomik po osi Z: 820 mm, nazivna (navidezna) moč: 82 kVA, proizvajalec krmilnikov: Heidenhain iTNC 530, dolžina obdelovanca (maks.): 900 mm, širina obdelovanca (maks.): 900 mm, skupna višina: 3.267 mm, skupna dolžina: 4.523 mm, skupna širina: 8.436 mm, vrtljajska hitrost (min.): 12.000 obr/min, hitrost vretena (min.): 12.000 obr/min, število mest v zalogovniku orodij: 80, Année de fabrication : 2004 Commande CNC : Heidenhain iTNC 530 Axes Course axe X (mm) : 2500 Course axe Y (mm) : 920 Course axe Z (mm) : 820 Table de travail Nombre de palettes : 1 Dimensions palette (mm) : 3100 Dimensions max. pièce (D x H, mm) : 900 Broche Vitesse max. de broche (tr/min) : 12 000 Puissance entraînement broche (kW) : 35/25 (40/100% ED) Refroidissement Capacité du réservoir (litres) : 600 Système outil Type de porte-outil : HSK-A 100 Nombre d’outils en magasin : 80 Type de changeur d’outil : Pick-up Fgjdpfxeylw D Ao Af Ssa Avec logements outils libres (mm) : 160 Avec logements outils occupés (mm) : 100 Longueur max. outil (mm) : 250 Poids max. outil (kg) : 12 Équipement Convoyeur à copeaux Vitres de contrôle rotatives Gyrophare Éclairage de l’aire de travail Air ou eau à travers la broche Palpeur RENISHAW Heures de fonctionnement : Heures sous tension : 61 685 Heures d’utilisation broche : 18 001 Puissance totale requise (kVA) : 82 Machine de base : Dimensions / Poids Longueur (mm) : 4523 Largeur (mm) : 8436 Hauteur (mm) : 3267 Poids (kg) : 26 000

Stanje: rabljeno, Leto izdelave: 2011, Lathes Travel X-axis: 270 mm Travel Y-axis: 120 mm Travel Z-axis: 1200 mm Turning length: 1135 mm Max. swing diameter: 700 mm Max. turning diameter: 340 mm Fjdpowwv Ifsfx Af Sega Max. torque: 680 Nm Spindle speed range up to: 4000 rpm Control: DMG Driven spindles Driven tools: 50 Chip conveyor Short bar loading magazine IRCO ILS-RBK 100/16 Various main spindle reduction tubes NC-controlled workpiece removal unit Conveyor belt for transporting workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction unit Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loading magazine Main spindle as integrated spindle motor ISM 102 Sub-spindle as integrated spindle motor ISM 76

Stanje: rabljeno, CNC stružnica Mazak QTN100IIMY, letnik 2007, v zelo dobrem stanju Os Y Fgsdpfsx Hhkkex Af Ssa Os C Konjiček

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Splošni podatki Fedpfsx D Nfujx Af Ssga Teža stroja: 2500–2950 kg Ta 12-osni Citizen Cincom M16-4M8 je bil izdelan leta 2021 in ima robustno konfiguracijo z možnostjo uporabe do 38 orodij, vključno z možnostmi za skupinska orodja, revolversko glavo in zadnji nosilec orodij. Omogoča hitro podajalno hitrost 32 m/min, s posebnimi hitrostmi za osi X2, Y2 in B. Glavni vretenasti motor ima moč 2,2/3,7 kW in zagotavlja učinkovito delovanje. Razmislite o priložnosti za nakup tega švicarskega stružnega stroja Citizen Cincom M16-4M8. Kontaktirajte nas za več informacij o tem stroju. Vrste uporabe Struženje

Stanje: rabljeno, Technical Details: Faceplate diameter: 1000 mm Fodpfxsvb Dcaj Af Sjga Swing diameter: 1600 mm Turning height: 1200 mm Main motor: 75 kW Faceplate speed range: 7 – 800 rpm Milling motor: 25 kW Milling spindle speed range: 7 – 3000 rpm Milling spindle taper: ISO 50 Crossrail vertical adjustment: 800 mm Ram dimensions: 240 x 240 mm Machine weight approx.: 40 t Space requirements approx.: 9 x 7.8 x 6.0 m Machine overhauled and modernized by the manufacturer in 2004 with CNC SIEMENS 840 D C-axis with driven tools Angular milling head Tool magazine rack Coolant system and chip conveyor

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Pressing force: 200 t Bending length: 4000 mm Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70–80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table dimensions (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel construction Possible operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support 700 mm travel, motorized and 2 support arms with 1500 mm travel, motorized, right/left Operation via control panel with emergency stop as well as electrical foot switch Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump output 19.3 l/min. Control DNC 7000, graphical display, PC software Fgedpfsu Icc Asx Af Ssa Equipment: Cutting zone lighting Stroke counter Tooling optional *

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 180 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.5 kW - Minimum C-axis resolution: 0.001° BUSHING HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Travel X/Y: 50/325 mm FRONT TOOL POST - Number of positions: 4 SUB OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Power-on hours: 31,902 h - Spindle hours: 12,146 h EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor Fjdpouha Slefx Af Sjga - Coolant tank * with high-pressure pump * with paper filter - Bar loader: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Stanje: zelo dobro (rabljeno), dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 300 mm,