Leto izdelave: 2012, stanje: kot nova (razstavni stroj), Used vertical form fill seal machine (VFFS) - VI-500 - Format: True Quad (Stabilo) bags, 200 mm wide x 100 mm deep. The machine has never been put into operation and therefore has zero operating hours! Fpjdpfx Asff Hucobvjd A VI-250 vertical form fill seal machine - Format: 50 mm bag width is also available for sale.

Stanje: skoraj kot novo (rabljeno), Polžični vijačni dozirnik Rovema SDX – natančno doziranje za praškaste in drobnozrnate izdelke Polžični vijačni dozirnik Rovema SDX je zasnovan za doziranje skoraj vseh praškov in drobnozrnatih izdelkov, kot so mlečni prah, kava, začimbe, sladkor in kemikalije. SDX dosega visoke higienske standarde in zagotavlja učinkovito, natančno doziranje tudi za zahtevne materiale. Fsdpfxjx Ai Awo Abvopd Napredni dozirni sistem vključuje 35-litrski zalogovnik, senzor nivoja polnjenja in vrtljiv vijak, kar omogoča enostavno čiščenje in hitro menjavo orodij – idealno za proizvodna okolja z visoko razpoložljivostjo. Vijak je posebej prilagojen značilnostim vašega izdelka, kar zagotavlja zanesljivo in enakomerno doziranje.

Leto izdelave: 2017, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Pharmatec Syntegon SVP 250 LF – System for Preparation of Sterile and Aseptic Liquid Pharmaceuticals For sale is a Pharmatec Syntegon SVP 250 LF formulation system for Small Volume Parenterals (SVP). The sale is being conducted on behalf of Syntegon (manufacturer, formerly Bosch Packaging/Pharmatec GmbH, Dresden). Technical Specifications: - Suitable for aqueous solutions, suspensions, and emulsions - Process adaptation possible: terminal sterilization, sterile filtration, aseptic compounding - 2-vessel system for batch sizes of 25–250 L (expandable to up to 4 vessels) - Addition of excipients via manhole under LAF or via pump system - Potent active substances (OEB4/OEB5) possible via high-containment valve - CIP/SIP interfaces and pre-configured automation for connection to filling lines - GMP-compliant design, suitable for cleanroom environments Pricing: - Special price: Please submit your offer - Original purchase price in 2018: approx. €1,050,000 - Current list price for comparable systems in 2025/2026: €1,415,000 Fedpfexdy Ersx Abvjpd Condition & Lead Time: The system is currently not fully operational, as the automation system including software needs to be reinstalled and certain components replaced. Completion will be carried out directly by the manufacturer Syntegon according to agreement – time required approx. 3–4 months. For comparison: lead time for a new system is around 12 months. Special Features: - The system was originally manufactured for exhibition purposes (demonstration system) - Sale is taking place directly on behalf of Syntegon, the original manufacturer - Ideal for pharmaceutical companies seeking a flexible and high-performance SVP system with a manageable delivery time.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2012, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Combination multihead weigher + vertical form fill and seal (VFFS) machine The machine has only 50 operating hours! TECHNICAL DETAILS Maximum bag output: 50 bags/min Fodpfxowbu Sqe Abvopd Multihead Weigher CM-B10 Weighing heads: 10 Weighing range: 10 – 1,000 g Maximum volume: 1,300 ml VFFS Machine E-250 Film roll diameter (max.): 450 mm Bag width: 50 – 250 mm Bag length (max.): 400 mm Current setting – bag width: 155 mm Current setting – bag length: 350 mm EQUIPMENT - Film holder for rolls up to 450 mm - Manual filling via central hopper - Weighing heads arranged in a circular configuration

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Polnilna postaja za Big Bag vreče ali sode, sestavljena iz: - Dovajalni zalogovnik - Vibracijski kanal z magnetnim pogonom 550/400x2500 mm, višina kanala 200 mm, nameščen na gumijastih blažilnikih, s podporno konstrukcijo Fpsdew Rq Dyspfx Abved - Frekvenčni pretvornik, vgrajen v krmilno omaro s PLC za povezavo s tehtnico - Dozirna talna tehtnica, 1200x1200 mm, 1 kg – 3000 kg, elektronska enota za interpretacijo s funkcijo tare Nova cena 39.850 € (brez DDV), račun je na voljo kot dokazilo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, CORTALAZZI FINTEC LINIJA ZA PLOČEVINKE IZDELANO V ITALIJI 1-Depaletizer Model 2000 2-Izplakovalnik model 2020 Fpjdpfx Abeygkzwjvod Slim 250 ml/330 ml Klasik 330 ml Sleek 500 ml 3-Transporter med depaletizerjem in polnilcem 10 m 4-Polnilec izdelan v Italiji Cortalazzi Fintec 50-glav model 2000 5-Premix izdelan v Italiji Cortalazzi Fintech model 2000 18.000 l/uro 6-Premix hladilni toplotni izmenjevalnik gea NT50 model 2013 18.000 l/uro 7-Zapiralnik SIMA CFT-6 GLAV model 2000 Izdelano v Italiji 8-Krmilna omara (Cortalazzi fintec model 2000) 9-35 m transporterji med polnilcem in shrink 10-Twist za kodirnik datuma 2 kosa 11-9 m transporterjev pred shrink 12-2017 model Mimpak shrink izdelan v Turčiji 40 pakiranj/minuto 13-3 m transporterjev za shrink 14-Paletizer Ersey izdelan v Turčiji

Stanje: dober (rabljeno), Leto izdelave: 1991, Nameščevalnik PET plastenk 0,5 l Fpjdexnkyuspfx Abvjd vključno z vhodno/izhodno tekočim trakom

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Kolbenfüllmaschine Fpsdpfeigytisx Abvod Hersteller: EFM/LVS Typ: 2-Stationen-Kolbenfüllmaschine mit beheizbarem Trichter und Rührwerk Leistung: max. 3.000 Stück/Stunde Füllbereich: 200 ml – 1.000 ml (einfach manuell einstellbar) Abmessungen: L x B x H = 1.700 x 1.100 x 1.900 mm Elektrik: 400 Volt – 50 Hz – 0,75 kW (Rührwerk) Druckluft: mindestens 6 bar Ausstattung: Pneumatisch angetriebener Füller / Logo-PLC / Mobil auf Rollen Optional kann die Maschine mit einem Förderbandsystem und pneumatischer Sterntaktpositionierung geliefert werden.

Stanje: novo, Leto izdelave: 2025,

Stanje: novo, Leto izdelave: 2025, Rotary filler for filling liquids, pastes, powders, or bulk materials into pre-formed cups and subsequently sealing the cups with film. Integration of a capping module for closing the cups with a hard plastic/hard shell lid is possible (at an additional cost). The filling and sealing machine from the AMTEC CUP-FILLINGsystem series can handle various cup types, shapes, and sizes, and is flexible regarding the type of product to be filled. The product simply needs to have flow properties, such as yogurt, dessert cream, sour cream, crème fraîche, sauces for finger food, smoothies, solid and dry foods such as rice, nuts, muesli mixes, cereals, instant noodles, or even fresh foods like sauerkraut, etc. Automatic operation starts with cup feeding, filling, sealing of the cup opening with film (optional capping with a lid), and collecting the cups/containers. The dosing unit is selected as required (e.g., volumetric pump with external tank, auger doser, etc.) and is included in the offer. Easy operation thanks to touchscreen monitor. - Specifications: max. machine cycle speed (idle): 50 cycles/minute; filling volume: customized; cup/container dimensions: customized; number of filling heads: max. 2; film type: suitable for sealable mono and composite films; all product-contact parts are made of stainless steel 304; power supply: 220/380V, 3kW; machine dimensions: L1100xW1100xH1983mm; weight: approx. 800kg. Please note that our new equipment prices are often below standard used market prices. Feel free to contact us and let us know your packaging application. - We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times from approx. 3 weeks. - All machines are available with full warranty. Fodpfx Asv Nkzrsbvopd

Stanje: novo, Leto izdelave: 2025, Automatic filling and capping system for liquid dispensing. Suitable for various liquids and oils from the food sector (still water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as non-food products (perfumes, cosmetic oils, cleaning agents, etc.). The automatic filling machine is equipped with two filling heads that move both vertically and horizontally, enabling continuous filling and thus achieving a higher cycle rate. The movable filling heads of the filling machine automatically detect the position of the bottles and the diameter of the bottle neck, offering additional benefits such as minimized adjustment work and sensor settings – within a defined range. Changing to other bottle sizes is therefore made much easier, which ultimately results in shorter downtimes due to time savings. Simple adjustment to different bottle widths and heights without the need for additional format parts. After filling, bottles are transported by conveyor belt to the automatic capping machine. Cap positioning and closing are fully automatic. Fedpfx Aev Nk R Hsbvepd - Specifications: Filling range: 30-3000 ml; Number of filling heads: 2; Maximum machine cycle rate (idle): 50 cycles/min; Stainless steel version 304, product-contacting parts made of stainless steel 316; Dimensions and weight of the filling system depend on the final layout. Please note that our new equipment prices are often below typical used equipment prices. Feel free to contact us and specify your packaging requirements. - We usually have 30-50 different new machines available immediately from stock. For machines custom-manufactured to client specifications, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic shrink-sleeve labeling machine with a capacity of up to 400 cycles/minute (shrink-sleeve length 150mm). Shrink tunnel included. Stainless steel version (SS304), cutter driven by servo motor, no-bottle-no-label feature, sleeve label feed device with speeds of up to 90m/min for fast and precise production. Brushes secure the sleeve label in the correct position, bottle positioning device, adjustable machine height according to bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. — Specifications: up to 400 cycles/min (with a sleeve label length of 150mm); sleeve label Ø: 28–50, 50–95, or 95–125mm; sleeve label length: 35–300mm; sleeve label thickness: 0.035–0.08mm; power: 2kW; machine dimensions: L6400 x W1100 x H2600mm; weight: 1500kg. Fpjdpfjv Nlavsx Abvsd Please note that our prices for new machines are often below the typical prices for used ones. Please feel free to contact us and let us know your packaging requirements. — Normally, we have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short delivery times, starting from approx. 3 weeks. — All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system for filling small bottles with low liquid volumes: a typical application is eye drops. The system features a container orientation module that places the small bottles onto a conveyor belt. Modules include bottle cleaning (water/gas), cleaning of internal/external seams (cap components), filling, and labeling. The system is PLC-controlled. A total of 3 water rinsing and 3 gas rinsing cycles ensure an extremely high level of cleanliness with no water residues. All liquid-contact parts are constructed entirely from SS316 stainless steel. - Specifications: Filling accuracy: < +/- 0.5%; Output rate: up to 120 bottles/min; Filling volume: 5-30 ml; Power: 380V, 3.8 kW; Compressed air: 6 bar. - All specifications are for reference only. The final configuration depends on the exact production requirements. Please send us a detailed inquiry (container size and shape, required speed, product to be filled, processing steps) so we can provide you with a comprehensive quotation. The machine/system is also available in various versions for different packaging sizes and packaging speeds. Fodev Nlbtopfx Abvjpd Please note that our new machine prices are often lower than typical used equipment prices. Feel free to contact us with your packaging requirements. - We generally have 30-50 different new machines available from stock for immediate delivery. For customized machines, we offer very short lead times starting from approx. 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filler for pastes and liquids. Typically used for cosmetics such as make-up, creams, or general care products like shower gel, shampoo, hair gel, toothpaste, sunscreen, etc. Suitable for pre-formed tubes (sealed with caps) made of aluminum. The machine provides fully automatic feeding and orientation of tubes (rotation in the slot) based on registration marks, as well as filling and sealing of the tubes. Prior to filling, the tubes are air-rinsed to prevent contamination. The no-tube-no-fill function is also a standard feature. Water cooling system, batch/date printer, and dosing unit comprising pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operation via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (slots) for different tube diameters, external tube feed elevator. – Specifications: Max. machine cycle rate (idle): 50 cycles/min; filling range: 1–120 ml; accuracy: ±1%; tube diameter: 10–28 mm (a separate slot required for each tube diameter); tube length: 50–180 mm; number of filling heads: 1; storage tank capacity: 40 L; all product-contacting parts made of stainless steel 316L; power supply: 220/380 V, power consumption: 3.1 kW; compressed air: 0.4–0.6 MPa; machine dimensions: L1950xW750xH1850 mm; machine weight: 900 kg. Fodpov Nldhsfx Abvepd Please note that our new prices are often below typical used prices. Feel free to contact us and tell us about your packaging application. – We usually have 30–50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, I-, Z- or L-shaped belt conveyor for transporting small or large-volume, wet/moist, deep-frozen products to the weighing unit. Open design, corrugated sidewalls, water-resistant; product-contact parts made of polyurethane, certified to FDA 21 CFR 177.2600. Specifications: Conveyor pocket dimensions: L (customizable to product requirements) x W 250 x H 50 mm; stainless steel frame; adjustable conveyor speed; conveyor dimensions: L (dependent on conveying incline) x W 450 x H 3,500 mm. The machine/system is also available in other configurations for various packaging sizes and packaging speeds. Fpjdpjv Nmmdefx Abved Please note that our new prices are often below standard used equipment prices. Feel free to send an inquiry and inform us about your packaging application. – Normally, 30–50 different new machines are available from stock for immediate delivery. For machines manufactured to customer specification, we offer very short lead times, starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic multi-lane cup or container filler, including film sealing module. Suitable for various container sizes, shapes, and materials (e.g., PP, PS, PET, paper, laminated films, etc.). Perfect for ready meals, noodles, pasta, dried fruit, snacks, candy, chocolate, soup powders, frozen meals, yogurt, ice cream, jam, etc. Fully automatic operation from cup dispensing through filling to sealing. Compatible with all types of (separate) dosing systems for liquids, pastes, granulates, powders, etc. Easy operation via touchscreen monitor, stainless steel design, easy to clean. Registration mark sensor. Wide range of sizes/shapes thanks to an adjustable cup cavity. - Specifications: Number of lanes: 2; max. idle machine cycle rate: 60 cycles/minute; power supply: 220V, 2.6kW; compressed air: 0.2m³, 6 bar; machine dimensions: L3000xW950xH1600mm. The machine/system is also available in further versions for different packaging sizes and speeds. Fjdpfx Ajv Nkyusbvopd Please note that our new prices are often lower than the usual used prices. Feel free to enquire and tell us about your packaging requirements. - We typically have 30-50 different new machines available immediately from stock. For custom-manufactured machines, we also offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic multi-lane filling and sealing machine for cups, containers, or trays, including a film sealing unit. Suitable for various container sizes, shapes, and materials (e.g. PP, PS, PET, paper, laminated films, etc.). Equipped with a 4-head linear weigher and four piston pumps for liquid dosing, this sample line is specifically designed for fresh olives and liquids. In general, the system can be configured for all types of (separate) dosing systems for liquids, pastes, granules, and powders (price adjustment may apply). This allows for ideal filling and packaging of ready meals, noodles, pasta, fresh or dried fruit, snacks, soup powder, frozen meals, yogurt, ice cream, jams, etc. Fully automatic operation, including feeding of containers/cups/trays, filling, sealing with film, and closing with a lid. Simple operation thanks to touchscreen monitor, stainless steel design (SUS304), easy to clean. Equipped with a print mark sensor. Wide range of sizes and shapes thanks to an adjustable guide rail system. Specifications: Number of lanes: 4; Machine cycles in idle: max. 23 cycles/minute; Container/tray dimensions: customized; Filling range: customized; Power: 2.1kW, 380V, 3-phase; Compressed air: 0.2m³/min, 6-8 bar; Machine dimensions: L3500xW800xH1700mm; Weight: 1300kg. Fpjdev Nkyzjpfx Abvjd The machine/system is also available in additional versions for different packaging sizes and speeds. Please note that our new equipment prices are often lower than typical used equipment prices. Please feel free to contact us and let us know your packaging requirements. Typically, there are always 30-50 different new machines available from stock. For custom-built machines, we offer very short lead times starting from just 3 weeks. All machines come with full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system for volumetric filling. The system is equipped with 12 filling nozzles and piston pumps, enabling high-speed and precise filling. The filling nozzles are drip-proof and prevent foaming of the filling material. Filling volume and speed can be easily adjusted/set. Additional features: accurate filling, no filling without a bottle, very stable operation. Capacity: max. 6,000 pcs/hr (with 370ml); bottle height: 150-280mm (glass bottle); bottle diameter: 50-90mm; power supply: 1.5kW, 380V/50Hz; stainless steel 304; system dimensions: L1850xW1350xH1900mm. Includes stepless speed conveyor. Fjdpfx Absv Nla Novjpd Please note that our new prices are often below the typical prices for used machines. Feel free to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system for volumetric filling and capping in a monoblock design. Volumetric injection pump, automatic cap orientation and closing. – Specifications: 4 or 8 filling nozzles; filling range: 20-1000 ml (optimal filling ranges: 20-100 ml, 50-250 ml, 100-500 ml, 200-1000 ml); speed: up to 5,000 bottles/h; filling accuracy: < +/- 1%; capping rate: >99%; SS316 stainless steel; power supply: 220V, 1.2-2.2 kW; compressed air: 0.6 m³, 6 bar; weight: 800-1000 kg. – All specifications are exemplary only. Please send us an enquiry with your product details (size, shape, required speed, etc.) so we can prepare a customised offer for you. Fsdsv Nlckopfx Abvepd Please note that our new machine prices are often below the usual prices for used equipment. Feel free to send us your enquiry and tell us about your packaging requirements. – We typically have 30-50 different new machines in stock for immediate delivery. For custom-manufactured machinery, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, and general care products like shower gel, hair shampoo, hair gel, toothpaste, sun cream, etc. Suitable for pre-made tubes (closed with a cap) made of plastic. Fully automatic feeding, orientation of the tubes (rotation in the tray) using the print mark, as well as filling and sealing of the tubes. Before filling, the tube is air-rinsed to prevent contamination. The no tube – no fill function is also a standard feature. Water cooling system, batch/date printer, and dosing unit consisting of a pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operated via touchscreen. Optional at extra charge: heated storage tank, agitator for storage tank, additional format sets (trays) for various tube diameters, external tube feeding lift. – Specifications: max. machine cycle speed (idle): 50 cycles/min; filling range: 1-250ml; accuracy: ±1%; tube diameter: 10-50mm (a separate tray is required for each tube diameter); tube length: 50-200mm; number of filling heads: 1; storage tank capacity: 40L; product contact parts made of stainless steel 316L; power supply: 220/380V, power consumption: 7kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW760xH1850mm; machine weight: 950kg. Fjdpsv Nldbjfx Abvepd Please note that our new prices are often below the usual prices for used equipment. Feel free to send us an inquiry and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from around 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general care products like shower gel, hair shampoo, hair gel, toothpaste, sunscreen, etc. Suitable for pre-made tubes (sealed with caps) made of aluminium. Fully automatic tube infeed and alignment (tube rotation in the trough) based on a print mark, as well as filling and sealing of the tubes. Prior to filling, the tubes are flushed with air to prevent contamination. No-tube-no-fill is also a standard feature. Water cooling system, batch/date coder, and dosing unit consisting of a pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operation via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (troughs) for different tube diameters, external tube feeding lift. – Specifications: max. machine cycle rate (idle): 80 cycles/minute; filling range: 1-300ml; accuracy: ±0.5%; tube diameter: 10-50 mm (note, each diameter requires its own trough); tube length: 50-210 mm; number of filling heads: 1; storage tank capacity: 40L; product-contacting parts made of stainless steel 316L; power supply: 220/380V; power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L2270xW960xH2100 mm; machine weight: 1200kg. Please note that our new prices are frequently below standard used equipment prices. Feel free to enquire and let us know your packaging requirements. – Typically, 30–50 different new machines are immediately available from stock. For machines manufactured to customer specification, we also offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty. Fodpfxov Nldne Abvspd

Stanje: novo, Leto izdelave: 2025, High-speed tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general personal care products like shower gels, shampoos, hair gels, toothpaste, sunscreen, etc. Suitable for pre-made tubes (closed with a cap) made of plastic, aluminum, or coated composite materials. Fully automatic feeding and alignment of tubes (rotation in the holder) based on registration marks, as well as filling and sealing of tubes. Before filling, the tubes are air-flushed to prevent contamination. No-tube-no-fill function is also a standard feature. An external tube feed lift, water cooling system, batch/date printer, and dosing unit (consisting of a pneumatic piston pump and storage tank with level sensor) are included. PLC controlled, operated via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (holders) for different tube diameters. Specifications: max. machine output in idle: 160 tubes/minute; filling range: 1–300 ml; accuracy: ±0.5%; tube diameter: 10–50 mm (one holder required per tube diameter); tube length: 50–240 mm; number of filling heads: 2; storage tank capacity: 70 L; all parts in contact with the product are made of 316L stainless steel; power supply: 220/380 V, power consumption: 6 kW; compressed air: 0.6 MPa; machine dimensions: L2870 x W1770 x H2340 mm. Fpjdsv Nld Iopfx Abved Please note that our new prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vibration feeder (approx. 160 l volume), supply hopper for the product featuring a vibration mechanism to convey the product onto the feed conveyor belt. Made of stainless steel; dimensions: L800 x W880 x H1100 mm; weight: 150/250 kg. The machine/system is also available in various versions to accommodate different packaging sizes and speeds. Fpjdpev Nmlmefx Abved Please note that our new prices are often below the standard market prices for used equipment. Feel free to send us your enquiry and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic machine for screwing screw caps onto containers, including a conveyor belt for integration into the packaging line. The machine features a quick-change capping head, making it suitable for a wide range of different screw caps. Before tightening, an alignment device ensures precise positioning of the cap on the container. Key components: Mitsubishi PLC, Stick sensor, pneumatic components from AIRTAC. - Specifications: max. machine cycle rate (idle): 25 cycles/minute; conveyor belt speed adjustable: 0–13m/min; cap diameter: customer-specific; power supply: 220V, 3.5kW; compressed air: 3–5 bar, 0.1m³; materials used: predominantly stainless steel 304; safety covers and conveyor belt links made of plastic; machine dimensions: L1450×W850×H1600mm; 350kg; conveyor belt dimensions: length approx. 2200mm (customizable), width approx. 110mm (customer-specific). Fpsdev Nk Ulopfx Abved The machine/system is also available in different versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the standard prices for used machines. Feel free to inquire and let us know your packaging task. - Typically, 30–50 different new machines are available immediately from stock. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. - All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Sample filling system for low-viscosity products (ketchup, jam, sauces, etc.) in bottles, jars, or cans. – Includes container orientation system, bottle/container rinsing, viscosity filler (hot filling), and vacuum capping function. – Specifications: filling volume 20–1000ml; bottle sizes: diameter 20–150mm; cap diameter: 20–70mm; number of filling heads: 4–12; output: up to 6,000 bottles/containers per hour; filling accuracy: +/- 1%; capping efficiency: >99%; power supply: 380V, 3.5kW; compressed air: 0.6m³, 6 bar. – Please note: These specifications refer to the sample system only. Final specifications will differ. Please provide your packaging details (container size and shape, filling product, required speed, etc.) so we can prepare a comprehensive quotation. Fedpfx Absv Nlbmsvjpd Please also note that our new machine prices are often lower than typical used equipment prices. Feel free to contact us and describe your packaging task. – We generally have 30–50 different new machines available ex-stock at all times. For custom-built machines, we offer very short delivery times from approximately 3 weeks. – All machines are offered with full warranty.