Weinig Unicontrol nakup rabljenega (479)

Stanje: rabljeno, Leto izdelave: 1991, window machine, angle centre, profiling and tenoning of window sashes Iiedpfx Aodm Umljh Ask

Stanje: rabljeno, Slot spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and trimming carriage Iiedpfxsx H Al No Ah Aek ..... Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical data summary (additional accessories possibly included, please inquire) ..... Crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for identifying saw cuts > Axial adjustment range: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment range: pneumatically controlled, 8 positions for e.g., edge rounding from above Rounding unit ..... > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically linked with crosscut saw. > Radial adjustment: pneumatically operated on/off Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported 2nd Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported Transfer belt ..... For transferring parts to the longitudinal machining section, including part separation for doubles infeed to the longitudinal machining. 1st Profiling spindle (climb and counter rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled according to tool diameter 2nd Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Stanje: rabljeno, Used control cabinet from a Weinig Unicontrol 10, suitable for spare parts or for building a new control cabinet. Contents include, among others: - Siemens Simatic S5 - Siemens EMG 45 Iisdpfxjrrk I Ho Ah Ask

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Iiodpfx Ajvwdmwsh Aek

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Weinig Unicontrol 10 Year of manufacture: 1996 Technical condition: very good Description: The Weinig Unicontrol 10 is an automatic CNC machine designed for planing and profiling wooden components, particularly used in the production of window and door joinery. It combines four-sided planing with precise profiling capabilities. Iedpfxswbikbs Ah Aoik Main features: ✅ Automatic adjustment of spindles and guides via CNC system ✅ Very high machining accuracy – ideal for series production ✅ Quick machine changeover thanks to profile settings memory ✅ Robust and durable frame construction ✅ Capability to work with various types of wood – both soft and hard Included: Weinig Univar 6, year of manufacture: 1996, also in very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Unicontrol 12 Includes: Cross-cutting unit (Pos. A), Tenon and slot spindle (Pos. C), Transfer belt (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling unit right (Pos. P) For the production of individual parts and elements in frame-based or serial manufacturing processes. Consists of a cross-processing unit and a longitudinal processing unit, connected by a transfer belt. Working width: 40–140 mm (see pressure guide left 40–140 mm) Working height: 40–120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal processing: approx. 220 mm + 2 x end profile length Workpiece length max.: 3500 mm Workpiece dimensions are dependent on machine configuration, manufacturing method, and tool assignment. Final definition of the part dimensions is only possible after receipt, review, and approval of the complete and finalized tool layout drawings. Cross-machining: Table feed motor power: 0.3 kW (0.4 HP) Pre-set feed speed during cutting, profiling, and return: 3–25 m/min Vario table with (studio window production possible) The clamping length of all tenon and slot spindles can be used without tool changeover slots. Workpiece clamping by means of a clamping bridge. Operated by clamping cylinders mounted under the table. Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° Isdjumci Sspfx Ah Asik The minimum workpiece length for angled windows depends on the angle and the wood width. Possible part dimensions when manufacturing angled windows: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter-processing is possible. Commission not documented. 1) NC angle adjustment automatic for angled part processing Tear-out protection via follow-up counter over the complete spindle length of the tenon and slot spindle for 90°processing. Manually adjustable counter wood strip for angled part processing. 2) Additional counter woods

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Iedpfxetq U A Is Ah Asik

Stanje: rabljeno, Slotted spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 6975 Weinig Unicontrol 6, year 1995, with electronic length stop and swiveling belt .... Sale on behalf of customer. Pictures are from our archive and were taken before the machine was delivered to the customer. Technical data overview (Please inquire about any additional accessories that may be included) .... Crosscut saw .... > Crosscut saw, pneumatic, with turret stop: > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 350 mm > Motor power: 3 kW > Laser guide light for recognition of saw cut section: Length stop .... > Electronic length stop 1st Tenoning and slotting spindle .... > Number of tools: 3/4 pcs. > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW 1st Profiling spindle - Co-rotating spindle (co- and counter-rotation) .... > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle: 232 mm > Motor power: 7.5 kW Iodpfx Ajx Dngwoh Aeik 2nd Profiling spindle .... > Position: vertical right > Number of tools: 3/4 pcs. > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle: 232 mm > Motor power: 11 kW 3rd Profiling spindle (hardware spindle) .... > Position: vertical right > Number of tools: 3 pcs. > Spindle speed: 6,000 rpm > Spindle diameter: 40 mm > Max. tool circle: 180 mm > Motor power: 3 kW 4. Grooving unit, horizontal-vertical, synchronized .... > Position: top horizontal > Number of tools: 1 pc. > Tool clamping length: 40 mm > Spindle diameter: 40 mm > Max. tool circle: 130 mm > Motor power: 3 kW Further features .... > Rebating device for splinter-free ...

Stanje: rabljeno, Used control cabinet from a Weinig Unicontrol 6, suitable as a source for spare parts or for building a new control cabinet. Iisdpet Na Drofx Ah Ask Contents include, among others: - Brake unit by Hilger & Kern - Transformer Rathgeber Type ET 1000.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, WEINIG, Type UNICONTROL 10/3, Machine No. 032-1136, Year of manufacture 1993 Technical specifications: Crosscut saw with 4-position rotary indexing, laser guide light Vertical stroke: 125 mm Speed: 2800 rpm Spindle diameter: 40 mm Tool diameter: 350 mm Clamping length: 40 mm Horizontal stroke: 160 mm Motor: 4 kW Extraction port: 80 mm diameter Iiedjwk U Rlopfx Ah Aek UNITEC slotting spindle 50 x 300 mm 3 tools Vertical stroke: 2 x 100 mm Speed: 3500 rpm Spindle diameter: 50 mm Tool diameter: 300–320 mm Clamping length: 300 mm Motor: 11 kW Extraction port: 140 mm diameter UNIVAR milling spindle 50 x 285 mm (climb/counter-rotation spindle) 3 tools Vertical stroke: 2 x 95 mm Speed: 6000 rpm Spindle diameter: 50 mm Tool diameter: 232 mm Clamping length: 285 mm Horizontal stroke: 80 mm Motor: 11 kW Extraction port: 140 mm diameter UNIVAR milling spindle 50 x 285 mm 3 tools Vertical stroke: 2 x 95 mm Speed: 6000 rpm Spindle diameter: 50 mm Tool diameter: 232 mm Clamping length: 285 mm Horizontal stroke: 80 mm Motor: 11 kW Extraction port: 140 mm diameter Configuration: Minimum working width: 30 mm / Minimum working height: 30 mm Maximum working height (with stroke): 100 mm / Maximum working height (without stroke): 120 mm Feed: 1.1 kW / infinitely variable 6–12 m/min Tool set: LEITZ Dufix IV-68 EURO window Digital display for studio window Mechanical length stop Screen control Twin-part package Return roller conveyor Machine is in good technical and visual condition and fully functional NET PRICE: EUR 7,400 (plus VAT) Delivery: EXW Lead time: Short notice by arrangement Inspection: By arrangement Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj - dvigovalno vreteno št. 1 - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar Iisdpfx Ahsmgc I No Ask - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Stanje: rabljeno, Slitting spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Iedexwdv Ijpfx Ah Aeik Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and profiling carriage ..... Machine available for inspection while still in operation! Optionally with used tools and window construction software for data transfer to the Unicontrol 12! Technical Data Summary (For additional accessories potentially included, please inquire) ..... Cross-cut saw ..... > Cross-cut saw electronically, horizontal stepless adjustment > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for cut line recognition > Axial travel 150 mm, NC axis, electronically stepless > Radial travel pneumatic, 8 positions e.g. for top edge rounding Rounding unit ..... > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial travel mechanically linked with the cross-cut saw. > Radial adjustment pneumatic, on/off control electronic length stop ..... > Length: 4,100 mm 1. Tenoning and slitting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial travel: 580 mm NC axis, stepless > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter support, entire clamping length is supported Transfer belt ..... For transferring parts to the longitudinal processing, including double part separation before entry into longitudinal processing. 1st profiling spindle (climb and counter rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, NC axis, stepless > Radial travel 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool diameter: 140 mm > Max. tool diameter: 232 mm > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions 2nd profiling milling unit (grooving unit from above) ..... > Position: horizontal above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8-position revolver > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, NC axis, stepless > Radial travel 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool diameter: 140 mm > Max. tool diameter: ...

Stanje: rabljeno, Combined tenoning, slotting and mitre processing centre Weinig UC 10, for flexible production of various windows, components and doors without tool change. Suitable for frame production, serial or single-part manufacture. Including Oertli tooling set for wood/aluminium IV 77 & 67 as well as wood IV 77 & 67. · Units: 1. Crosscut saw: NC-controlled, ø 40 mm, 3 kW 2. Tenoning and slotting spindle: Clamping length: 640 mm, ø 50 mm, stroke: 8 x 80 mm, 11 kW 3. Profiling spindle 1: Clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 4. Profile milling unit, horizontal from above, 3 kW, ø 40 mm, clamping length: 40 mm Ijdpfxovmqtce Ah Aeik 5. Profiling spindle 2: Clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 6. Profile milling unit, vertical right, 3 kW, ø 40 mm, clamping length: 160 mm 7. Profile milling unit, horizontal from below, 3 kW, ø 40 mm, clamping length: 125 mm · Studio window facility · CNC-controlled length stop · Lamella conveyor incl. return conveyor belt for automatic part return to operator · NC-axis: feed height adjustment · Rebating package · Including Oertli tooling set for wood/aluminium IV 77 & 67 as well as wood IV 77 & 67.

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Overview ----- 1. Cross-cut saw ----- Cross-cut saw pneumatic, with 8-position revolver stop Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for saw cut detection Manual length stop 4,100 mm 1. Tenoning and slotting spindle ----- Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle – same direction spindle (climb & counter-climb) ----- Position: vertical right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 pcs Spindle speed: 6,000 rpm Spindle diameter: 40 mm Max. tool swing diameter: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bar saw, horizontally and vertically indexed ----- Position: horizontal, top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial indexing: 2 positions Radial indexing: 2 positions Additional Features ----- Sash rebating unit for tear-free rebating Twin workpiece package Return conveyor for single-operator handling at working height: swivel tray Screen control: 99 programs Tilting window device Electronic angle display for tilted windows Iedpfx Aexvtggeh Aeik INCLUDES window tooling OPPOLD, year 2013: Oppold IV 68/78/92 timber Oppold IV 68/78 timber-aluminium Sale of tools as currently equipped, as is, with existing accessories. Note on window profiles, tool drawings, and tool system lists: Engelfried GmbH does not warrant that the actual tools correspond with the specified and illustrated systems. (Technical details as per manufacturer – no guarantee!)

Stanje: rabljeno, Corner Processing Line Weinig Unicontrol 10 (UC 10) for the production of windows, components, and doors. Suitable for frame-based, series, or single-piece production, featuring 2 tenoning and slotting spindles including Oertli tool set. - Units: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm Iiodjv Ag Tdopfx Ah Aek 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW - Double workpiece package - Profiling rework package with rework carriage - Automatic flipping system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Unit for edge rounding from below with crosscut saw - Georgian bar support rail - Incl. extraction pipe system - Incl. Oertli tool set - Additional technical data and tool drawings available on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 4.500 mm, premer orodja: 400 mm, največja hitrost vretena: 6.000 obr/min, model krmilnika: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontal, stepless adjustment) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment travel: 150 mm NC axis, electronically stepless Radial adjustment travel: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal, bottom Axial adjustment travel: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and mortising spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter bearing Axial adjustment travel: 580 mm NC axis, stepless Trailing counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter bearing Tool cutting circle: min. 140 mm Tool cutting circle: max. 232 mm Axial adjustment travel: 350 mm NC axis, stepless Radial adjustment travel: 80 mm NC axis, stepless Profiling milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment travel: 30 mm NC axis, stepless Radial adjustment travel: 125 mm NC axis, stepless Spindle speed: 9,000 rpm Tool cutting circle max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter bearing Axial adjustment travel: 350 mm NC axis, stepless Radial adjustment travel: 80 mm NC axis, stepless Spindle speed: 6,000 rpm Tool cutting circle min.: 140 mm Tool cutting circle max.: 232 mm 5th profiling milling unit (fitting spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment travel: 115 mm NC axis, stepless Radial adjustment travel: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Tool cutting circle max.: 210 mm 6th profiling milling unit (grooving unit from above), in auxiliary stand Position: vertical, working from above on the right Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment travel: 100 mm, 8 positions via pneumatic turret Radial adjustment travel: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool cutting circle max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Isdoxp U N Nepfx Ah Ajik Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment travel: 100 mm NC axis, stepless Radial adjustment travel: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Tool cutting circle max.: 200 mm MACHINE DETAILS Mortising spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus, Weinig Unicontrol 12 INCLUSIVE: used window tooling OERTLI IV 68, IV 78 for wood and wood-aluminum Further equipment details can be found in the attached document! Note: The machine has already been professionally dismantled.

Stanje: rabljeno, Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 Technical Data Summary (Please inquire for additionally included accessories) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for saw cut detection Length stop CNC-controlled ----- > Length: 3,500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenoning and grooving spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle vertical stroke pneumatic: 240 mm for timber thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. cutting circle: 320 mm > Spindle diameter: 50 mm Ijdsxtvgkopfx Ah Ajik > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb and counter-rotating) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle vertical stroke pneumatic: 240 mm for timber thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the machining of narrow, short parts (e.g. glazing bar components) Glazing bar guide consisting of: Glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 5: Horizontal top profiling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. cutting circle: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Sash forming device for tear-free sashes > Double-piece package > Return conveyor for single-operator use: swing belt > Screen control > Angle sash window device > Electronic angle display for sash windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Cross-cut saw: 80 mm Grooving spindle: 140 mm Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Grooving device from...

Stanje: rabljeno, Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Iodpfx Aoxpi Duoh Ajik Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions Iijdovu Hghjpfx Ah Aok > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly inspected before delivery Technical Data Summary (For any additionally included accessories, please inquire) Iodpfxevu Hfqj Ah Aeik Pos. 1: Cross-cut saw ----- > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for identifying the saw cut > NC length stop, mounted on slotted table included Positioning of the cross-cut saw integrated into control system. > Length: 3500 mm Pos. 2: Tenon and slot spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb-cut and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide rail in the stop (area of climb-cut spindle), Sash support bar from above in the area of vertical right profile milling unit and profiling spindle. Pos. 5: Profile milling unit horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-capable > Rebate unit for tear-free rebating > Double-part package > Return conveyor for one-man operation: pivoting belt > Screen control > Tilt window device > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original pictures available yet. Photos show an identical machine from our archive. ----- Price for the above machine on request! ----- Optional at extra cost: EUR 6,500.00 Note...

Stanje: zelo dobro (rabljeno), Multiblade Saw Max. cutting width: 310 mm Chain width: 340 mm Max. pass-through/input width: 650 mm Max. cutting height with Quickfix clamping flange: 110 mm Saw arbor diameter: 65 mm Min. wood length: 500 mm Max. feed speed: 35 m/min, variable Main motor power: 22.0 kW, 400 V, 50 Hz Feed motor: 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max.: 300/350 mm Working height: 850 mm Extraction port diameter: 250 mm Required extraction volume: 5,300 m³/h Quickfix saw blade mounting Electric height adjustment of saw spindle Electric height adjustment of pressure unit Dimensions approx. L x W x H = 1,750 x 1,750 x 1,500 mm Weight: 1,850 kg Including options: Oil level monitoring SafetyPlus Quickfix Note on used machines: • Specifications subject to change and prior sale. • Prices are ex-works, ex-loading. • The machine has been cleaned and function tested. • All machines are purchased as seen, without any guarantee or warranty. Buyers are welcome to inspect the machine at our premises. • Special agreements are only valid in written form. Iijdpfxetwy Iue Ah Aok (We will only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2014, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control system: Memory function Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 125 - 145 mm Tool flight circle for rebate cutter: 130 - 160 mm Isdpfx Ahewzmu Ro Asik Axial adjustment range: 5 mm Rebating device MarathonCoatin (coating) for table insert in front of the 1st lower tool seat Electronic digital display for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool seat Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool flight circle for straight knife heads max.: 163 mm Max. tool diameter behind fence plane: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool flight circle for straight knife heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle radial CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 93 - 200 mm Tool flight circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Spindle radial CNC-controlled Segmented pressure shoe in front of top tool seat, adjustable to tool flight circle and swing-away from tool, spring-loaded. Pressure shoe before and extraction after the top spindle with electronic digital displays, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Feed roller in front of 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to left tool seat, axial 35 mm Machine electrics ----- Operating voltage 400 V (range 380 - 420 Volt), 50 Hz. All spindles IE 2 design Electrical configuration according to DIN VDE 0113, electrical equipment for industrial machinery EN60204, IEC-204-1. Additional electrical regulations are not considered. Machi...

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Delovna širina 230 mm Delovna višina 160 mm Število vreten: 5 Razporeditev vreten: 1. Spodnje 15 kW 2. Desno 11 kW 3. Levo 11 kW 4. Zgornje 15 kW 5. Spodnje 7,5 kW Hitrost vrtenja vretena 6000 obr/min Premer vretena 50 mm 3 pogonski valji v delovni mizi Iedsx Hzv Topfx Ah Asik Hitrost podajanja nastavljiva s frekvenčnim pretvornikom do 60 m/min Podajanje poganja kardanska gred Pnevmatski pritiski Tehnična dokumentacija Dimenzije stroja 300x180x170 cm (V) Teža 3500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Štiristranska skobeljna / profilirka – WEINIG QUATTROMAT 23P leto izdelave: 1998 stroj v skladu s CE standardi delovna širina od 13 do 230 mm delovna višina od 6 do 120 mm 4 vretena premera 40 mm (vključno z rezili) hitrost vrtenja vreten 6000 obr/min moč motorja zgornjega vretena 4 kW (5,5 KM) Ijdpfxex El E Nj Ah Asik moč motorja spodnjega vretena 4 kW (5,5 KM) moč motorjev navpičnih vreten 5,5 kW (7,5 KM) uporabniški priročnik + električna shema + priročnik rezervnih delov + CE certifikat delovanje preverjeno (video na zahtevo preko WhatsAppa) dimenzije za transport 4100x1400x1700h mm teža 1600 kg

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Iodpfx Asv Tb Hgsh Aeik Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)