Weinig Hydromat 23 nakup rabljenega (526)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Štiri-stranska skobeljna Weinig Hydromat 23, lamelirni stroj 8 vreten, Delovna širina: 230 mm, Delovna višina: 160 mm, Premer vretena: 50 mm, Podajanje: 7,5 kW / 6 – 36 m/min, Razporeditev vreten: 1–spodaj (7,5 kW) 2–desno (7,5 kW) 3–levo (7,5 kW) s profilnim jointerjem 4–desno (7,5 kW) s profilnim jointerjem 5–zgoraj (7,5 kW) s hidravličnim vpenjanjem 6–spodaj (30 kW) s hidravličnim vpenjanjem 7–zgoraj (7,5 kW) s hidravličnim vpenjanjem in ravnalnim jointerjem 8–spodaj (7,5 kW) s hidravličnim vpenjanjem in ravnalnim jointerjem. Trda prevleka. Ijdey Uc T Aepfx Abxoth Dva gnana valja v mizi.

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm Itedpfxswvqkle Abxeh • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 102940, WEINIG HYDROMAT H23 ELEKTRONSKO URAVLJANJE PODAJA S FREKVENČNIM PRETVORNIKOM (8 – 100 m/min). PODAJNI MOTOR 22 kW VRETENA 50 mm NAJVEČJA DELOVNA ŠIRINA 230 mm NAJVEČJA DELOVNA VIŠINA 160 mm KRAJŠI PODAJNI DEL Z ZGORNJIMI PODAJALNIMI VALJI 220 mm SPODAJ 15 kW, 6.000 min⁻¹, LEŽAJ ZUNAJ OHIŠJA, PRIPRAVLJEN ZA NOŽNICO DESNO 11 kW, 6.000 min⁻¹, PRIPRAVLJEN ZA NOŽNICO LEVO 15 kW, 8.000 min⁻¹, PRIPRAVLJEN ZA NOŽNICO DESNO 11 kW, 8.000 min⁻¹, PRIPRAVLJEN ZA NOŽNICO Iodpfx Aszd Tavsbxeth LEVO 15 kW, 8.000 min⁻¹, PRIPRAVLJEN ZA NOŽNICO ZGORNJI 18,5 kW, 6.000 min⁻¹, LEŽAJ ZUNAJ OHIŠJA, PRIPRAVLJEN ZA NOŽNICO SPODAJ 11 kW, 6.000 min⁻¹, LEŽAJ ZUNAJ OHIŠJA, PRIPRAVLJEN ZA NOŽNICO (RAVNI NOŽNIK) + LEŽAJ ZUNAJ OHIŠJA ZGORNJI 18,5 kW, 8.000 min⁻¹, LEŽAJ ZUNAJ OHIŠJA, PRIPRAVLJEN ZA NOŽNICO (RAVNI NOŽNIK) + LEŽAJ ZUNAJ OHIŠJA SPODAJ 22 kW, 6.000 min⁻¹, LEŽAJ ZUNAJ OHIŠJA, PRIPRAVLJEN ZA NOŽNICO 12x ZGORNJI PODAJALNI VALJI (2x 220 mm + 10x 140 mm) 7x SPODNJI PODAJALNI VALJI MOŽNOST DODATNE NAMESTITVE RAVNIH ALI PROFILNIH NOŽNIKOV PO POTREBI AVTOMATSKI SISTEM MAZANJA CELOTNA DOKUMENTACIJA VKLJUČENA DOLŽINA STROJA 5,2 m

Stanje: dober (rabljeno), Leto izdelave: 1997, Štiristranski skobeljni stroj Weinig Hydromat 23 8 vreten, Številka stroja: 023 - 2998 Delovna širina: 230 mm Delovna višina: 160 mm Premer vretena: 50 mm Dovod: ločena hidravlična postaja (15 kW) Razporeditev vreten: Profiliran pogonski jekleni valj pred prvim vretenom 1 - spodaj (22 kW) (2x profiliran pogonski jekleni valj med 1. in 2. vretenom) 2 - spodaj (7,5 kW) 3 - desno (7,5 kW) 4 - levo (11 kW) (1x pogonski jekleni valj med 4. in 5. vretenom) 5 - zgoraj (26 kW) Iedpey Iwrtjfx Abxsth 6 - spodaj (37 kW) (1x pogonski jekleni valj med 6. in 7. vretenom) 7 - spodaj (7,5 kW) 8 - zgoraj (11 kW) (1x pogonski jekleni valj za 8. vretenom) Vseh 8 vreten opremljenih z orodji Trdo prevlečena miza Skupno število pogonskih valjev v mizi: 7 kos Skupna moč: 136 kW 2 Euro paleti z dodatnimi vstopnimi valji/rezervnimi deli/orodjem vključeni. Ločena električna omara Ločena krmilna omara z digitalnim inverterjem.

Stanje: rabljeno, Leto izdelave: 1996, Weinig Hydromat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm Spindles: bottom, right, left, top, bottom Itedpfx Abjqrt Ekjxsh b-r-l-t-b (bottom-right-left-top-bottom) without feed machine only Machine is dismantled, immediately available Transport can be arranged

Stanje: zelo dobro (rabljeno), Weinig Hydromat 23C s 6 vreteni. Maksimalna širina: 245 mm Maksimalna debelina: 160 mm Posebna električna omara. Poseben daljinski upravljalni panel. Avtomatski sistem za mazanje posteljnih plošč. Popolna robustna zvočna izolacija. Podajalni motor 15 kW, hitrost podajanja do 100 m/min Vretena: Št. 1: 11 kW – spodnje, 6000 obr/min, pripravljeno za ravno spojno skobljanje. Št. 2: 11 kW – desno, 6000 obr/min, pripravljeno za ravno in profilno spojno skobljanje. Št. 3: 15 kW – levo, 6000 obr/min, pripravljeno za ravno in profilno spojno skobljanje. Št. 4: 15 kW – zgoraj, 6000 obr/min + zunanji ležaj + pripravljeno za ravno in profilno spojno skobljanje. Št. 5: 30 kW – zgoraj, 6000 obr/min + zunanji ležaj + pripravljeno za ravno in profilno spojno skobljanje. Št. 6: 15 kW – spodnje, 6000 obr/min + zunanji ležaj + pripravljeno za ravno in profilno spojno skobljanje. Itodpfxoyl Rmqo Abxsh Premer vretena: 50 mm Nosilni nosilec: 0,55 kW Popolna dokumentacija priložena. Težka izvedba zvočne izolacije. Možna dobava z hidro orodjem po potrebi. Možna dobava s popolno mehanizacijo po dogovoru.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Delovna širina 230 mm Delovna višina 160 mm Število vreten: 5 Razporeditev vreten: 1. Spodnje 15 kW 2. Desno 11 kW 3. Levo 11 kW 4. Zgornje 15 kW 5. Spodnje 7,5 kW Hitrost vrtenja vretena 6000 obr/min Premer vretena 50 mm 3 pogonski valji v delovni mizi Iedpfx Asx Hzv Tobxeth Hitrost podajanja nastavljiva s frekvenčnim pretvornikom do 60 m/min Podajanje poganja kardanska gred Pnevmatski pritiski Tehnična dokumentacija Dimenzije stroja 300x180x170 cm (V) Teža 3500 kg

Stanje: zelo dobro (rabljeno), Štiristranska skobeljna Weinig Hydromat 23C Delovna širina: 230 mm Delovna višina: 160 mm Število vreten: 7 Razporeditev vreten: 1. Spodaj 15 kW 2. Desno 7,5 kW 3. Levo 7,5 kW 4. Zgoraj 15 kW 5. Spodaj 30 kW (večlistna žaga) 6. Spodaj 7,5 kW (hidro podpora) 7. Zgoraj 7,5 kW (hidro podpora) Hitrost vrtenja vreten: 6000 o./min Itedpfoxlcufex Abxjh Premer vretena: 50 mm 4 pogonski valji v delovni mizi Hitrost pomika nastavljiva s frekvenčnikom do 36 m/min Pomik poganja kardanska gred Pnevmatski pritisni elementi Tehnična dokumentacija

Stanje: zelo dobro (rabljeno), Funkcionalnost: nepreverjeno, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, Weinig Profimat 23 E Delovna širina: 260 mm, delovna višina: 170 mm, 5 vreten, premer vretena: 40 mm, razporeditev vreten: 1- Spodaj - 5,5 kW 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Podajalna hitrost: 6 - 24 m/min - 4 kW Zračni blazinski sistem v mizi Ijdpfxozbz S No Abxeth Ena pogonska valjčna na izhodu mize. Z orodjem.

Stanje: zelo dobro (rabljeno), Catalogue number: 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 170 mm 3) Left vertical: 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal: 230 mm, 11 kW 5) Top horizontal: 230 mm, 7.5 kW 6) Bottom horizontal: 230 mm, 11 kW - All spindles adjustable up/down, right/left Iodpfxsy N Ahij Abxsth - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric brake - 6 infeed, feed, and toothed rollers from above, including 1 double roller - Double rubber-coated outfeed feed roller from above - Double rubber-coated outfeed feed roller from below - Side pressure - Feed via cardan shafts - Pneumatically pressed rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric thickness adjustment - Motor for raising machine body: 0.55 kW - Central lubrication of the table - Extraction port diameter: 6 x 140 mm - Dimensions (L x W x H): 4900 x 2400 x 2000 mm - Weight: approx. 4,000 kg ADVANTAGES – German-made, WEINIG brand – 6 heads – Unpainted – Used planer, very good condition Original photos Net price: 142,900 PLN Net price: 34,000 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary due to currency fluctuations)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Throughfeed Moulder with 4 Spindles Itodjy Enlfopfx Abxoh Number of spindles: 4 Spindle arrangement: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Spindle axial adjustment range: 30 mm Planer spindle adjustment range: 5 mm Planer spindle motor power: 5.5 kW Top spindle motor power: 4.5 kW Vertical spindle motor power: 7.5 kW Engines are braked Feed roller diameter: 140 mm Length of infeed table: 2,000 mm Pneumatic pressure for feed rollers Feed roller before first bottom spindle, pneumatically actuated Left pressure roller in front of machine infeed CE compliant Including 4 pcs. planing heads Dimensions approx. L x W x H = 3,000 x 1,250 x 1,550 mm Weight approx. 1,000 kg Note on used machines: • Technical data subject to errors and prior sale. • Specified prices are ex location - free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers may inspect the machine onsite. • Special agreements are valid only in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel Iedpoxpn T Uofx Abxjth > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!)

Stanje: delavnici obnovljeno (rabljeno), Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 pcs. Weinig Hydro Planer Type Uniplan 23 ----- Machine factory-refurbished by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter-bearings without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remotely operable with closed hood. Machine with continuous, chainless feed system equipped with rubber rollers. Electric height adjustment of spindles according to mechanical digital display (SIKO). Limit switch for height adjustment. Feed roller pressure pneumatic. Stops and table plates non-adjustable. Machine with steel table plates. Machine fully enclosed with integrated sound and dust protection, including internal lighting. Electrical execution according to DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC - 204 - 1. No other electrical regulations considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before using existing tools whether they are suitable for this speed. Please also take this into account when ordering new tools. Technical specifications: Working width max.: 230 mm Working height min.: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Each horizontal spindle: 7.5 kW (7.5 HP) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Ijdsxpn Tzopfx Abxoth Max. tool diameter: 163 mm Fixed clamping offset below: 0.5 mm (Technical data according to manufacturer – subject to change!)

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 8 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Weinig skobljalna linija ----- Sestavljeno iz naslednjih posameznih strojev: Poz. 1: Weinig Profimat 23 E, štiristranski skobeljni stroj, številka zaloge: 2803 Iedpfxjxpn Tue Abxeth 5 vreten + žaga za steklene letve Poz. 2: Weinig Uniplan 23, številka zaloge: 2804 Fini in hidro skobeljni stroj z 2 horizontalnima vretenoma Poz. 3: Weinig RF 15, številka zaloge: 2805 Vzdolžno-prečno-vzdolžni transporter z vračanjem obdelovanca k operaterju Podrobni opisi strojev so na voljo pod navedenimi številkami zaloge. (Tehnični podatki po navedbah proizvajalca, brez jamstva!)

Stanje: pripravljen za uporabo (rabljen), Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Sided Planer Profimat 23, window version with glass bead separation (can also be used as a grooving spindle) ATS control and program control ----- Machine is currently being overhauled and functionally tested Technical data summary (please ask for details on any additional included accessories) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW Ijdpfxsu Su Hue Abxjth > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically cycling up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically cycling up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glass bead separation or usable as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Joint operation of the right spindle and the glass bead discharge via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planer heads available (technical data according to manufacturer – subject to prior sale and not guaranteed!)

Stanje: rabljeno, Leto izdelave: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on the upper spindle, air cushion table with two-axis control for the left and upper spindle, brand new control system (latest Weinig version). Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW, shared motor with left spindle 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optional with/without feed Feed brake system: Yes Feed speed steplessly adjustable: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubrication pump: manual Max. cutting depth jointing: 10 mm Jointing rebate cutter on jointer: Yes Driven rollers in table: 1 unit Control type: PLC control Spindle position indicator: mechanical numeric display Ijdpfxewwwkhs Abxjth Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Automatic 5-spindle profiling machine for the production of frames, furniture components, windows, doors, mouldings, broom handles, wooden toys, and a variety of other items Features: - Heavy-duty machine base made from solid cast iron - Cardan drive without chains: precise, robust, and durable - Specially shaped feed roller teeth reduce penetration depth into the wood - Compact feed system - Pneumatic pressure on feed rollers Itjdpfx Ajzblc Ejbxeh Technical data: - Minimum/maximum working width: 20/230 mm - Maximum working height: 120 mm - Variable feed speed: 5–24 m/min - Spindle diameter: 40 mm - Spindle speed: 6000 rpm - Feed roller diameter: 140 mm - Planing table length: 2000 mm - Sound-insulated and fully enclosed - Motorized adjustment of vertical feed - Side pressure roller opposite first right spindle - Motorized adjustment of the top spindle - Automatic table lubrication Configuration: 1st spindle: bottom cutter – min./max. diameter 125–145 mm – motor 5.5 HP 2nd spindle: right vertical spindle – min./max./max. diameter 100-200/180 mm – axial adjustment 3rd spindle: left vertical spindle – min./max./max. diameter 100-200/180 mm – axial adjustment – motor power for both vertical spindles 7.5 HP 4th spindle: top cutter – min./max. diameter 100/200 mm – motor 5.5 HP – axial adjustment 5th spindle: bottom cutter – min./max. diameter 100/200 mm – motor 5.5 HP – axial adjustment - 5 planing heads included - Extraction ports (5 units): 140 mm - Compressed air: 6–8 bar - Dimensions (LxWxH): 3400 x 1600 x 1600 mm - Weight: 3000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, working width 250 mm working height 140 mm 8 heads 3 toothed feed rollers on the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom variable feed speed up to 100 m/min Ijdpfx Abjww H Rwsxoth spindle diameter 50 mm spindles supported on both sides feed via cardan shafts spindle speed 6000 rpm pneumatic pressure on feed rollers head adjustment in two axes cast iron body

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, working width 230 mm working height 140 mm 5 heads head configuration: bottom/right/left/top/bottom table lubrication system pneumatic feed roller pressure heads adjustable on two axes spindle speed 6000 rpm electric adjustment of pressure beam feed via cardan shafts infinitely variable feed speed Itjdpfxew Afahj Abxeh heavy-duty soundproof cabin

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, delovna širina 300 mm delovna višina 140 mm hitrost pomika 200 m/min premer vretena 50 mm razpored vreten: 1. spodnje - 22 kW 2. zgornje - 22 kW 3. desno - 18,5 kW 4. levo - 18,5 kW 5. desno - 18,5 kW 6. levo - 22 kW 7. zgornje - 22 kW Isdpfxoy N N U Ns Abxsth 8. spodnje - 22 kW 9. zgornje - 22 kW 10. spodnje - 22 kW 11. spodnje - 22 kW Možnost nakupa z dodajalnikom + 17.900 € neto

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 255 mm, višina skobljanja: 160 mm, premer vretena: 40 mm, širina skobljanja: 255 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 3.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, premer gredi skobeljnika: 40 mm, vrsta vhodnega toka: trifazni, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (5.5 kW) 2-Right (5.5 kW) Itedpfx Ajxg Sa Hjbxsh 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One powered outfeed roller integrated in the table.

Stanje: dober (rabljeno), Koda: 0339 Blagovna znamka: WEINIG Model: PROFIMAT 23/E - CE standard Avtomatski 5-vreteni skobeljni stroj za izdelavo okvirjev, pohištvenih delov, oken, vrat, letev, ročajev za metle, lesenih igrač in drugih lesenih izdelkov – CE standard. Značilnosti: - Masivno ogrodje iz litega železa za težke obremenitve - Kabelski prenos brez verige: natančno, robustno in vzdržljivo - Posebna zobovja na podajalnih valjih za manjši vstop v les - Kompaktni podajni sistem - Pnevmatski pritisk na podajalne valje - DIGISET WEINIG za levo in zgornje vreteno: nastavitev orodja neposredno z dvojnimi digitalnimi prikazovalniki Tehnični podatki: - Min./maks. delovna širina: 20/230 mm - Maks. delovna višina: 120 mm - Nastavljiva podajalna hitrost: 5–24 m/min - Premer vreten: 40 mm - Hitrost vreten: 6000 vrt/min - Premer podajalnih valjev: 140 mm - Dolžina predgladilne mize: 2000 mm - Zvočna izolacija in popolna varnostna zaščita - Motorizirano nastavljanje vertikalnega podajanja - Stranski pritisni valj nasproti prvemu desnemu vretenu - Motorizirano nastavljanje zgornjega vretena - Samodejno mazanje mize Sestava: 1° vreteno Spodnja glajalka – min./maks. premer 125–145 mm – motor 5,5 KM 2° vreteno Desno navpično profilno vreteno – min./maks. premer 100–200/180 mm – aksialna nastavitev 3° vreteno Levo navpično profilno vreteno – min./maks. premer 100–200/180 mm – aksialna nastavitev – moč motorja obeh vertikalnih vreten 7,5 KM 4° vreteno Zgornja glajalka – min./maks. premer 100/200 mm – motor 5,5 KM – aksialna nastavitev 5° vreteno Spodnja glajalka – min./maks. premer 100/200 mm – motor 5,5 KM – aksialna nastavitev - Število skobeljnih glav: 5 (vključeno) - Premer odsesovalnih priključkov (5x): 140 mm - Tlak komprimiranega zraka: 6–8 barov Itsdpfx Abeyvut Dexoh - Skupne mere (D x Š x V): 3400 x 1600 x 1600 mm - Teža: 3000 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Maksimalna širina skobljanja: 230 mm Maksimalna višina skobljanja: 120 mm Število vreten: 6 Maksimalno število vrtljajev vretena: 6.000 obr/min Dolžina podajalne mize: cca 2.000 mm Premer vretena: 40 mm Motorizirano nastavljanje širine in višine skobljanja Maksimalen pomik: 24 m/min Nujna zaustavitev Itodpfx Abozdk Dfexsh Približne mere (DxŠxV): 4.100 x 1.500 x 1.600 mm Približna teža: 2.800 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, 1. Strugarka/Profilarka Wysokoprędkościowa WACO MAXI, 8 głowic 8 wrzecion do rozcinania poziomego, prędkość posuwu 20-150 m/min Szerokość strugania robocza: 30-300 mm Wysokość strugania robocza: 10-150 mm Średnica okręgu tnącego: 180-260 mm Napięcie robocze: 400 V, 50 Hz Główny silnik posuwu: 37 kW Przemiennik częstotliwości: 45 kW 1. Głowica dolna – 24,5 kW 2. Głowica górna – 30 kW 3. Głowica prawa boczna – 18,5 kW 4. Głowica lewa boczna – 30 kW 5. Głowica prawa boczna – 18,5 kW 6. Głowica lewa boczna – 24,5 kW Rozcinanie poziome: 7. Głowica prawa boczna – 53 kW 8. Głowica lewa boczna – 53 kW Maks. szerokość obrabianego elementu: 200 mm Maks. wysokość obrabianego elementu: 63 mm Maks. średnica piły: 300 – 400 mm Średnica wrzeciona: 50 mm Zakres regulacji pionowej: 10 mm Obroty wrzeciona: 5 500 obr./min Podłączenie do odpylania: 2 x Ø160 mm Długość jednostki: 1 300 mm 2. Strugarka/Profilarka Wysokoprędkościowa WACO MAXI, 3 głowice Itodpszc I Dbefx Abxeh 3 wrzeciona do wykańczania, prędkość posuwu 30-300 m/min Główny silnik posuwu: 37 kW Przemiennik częstotliwości: 45 kW Prędkość posuwu, regulowana: 30-300 m/min 1. Głowica profilująca: 24,5 kW 2. Głowica górna: 24,5 kW 3. Głowica Rotaplan: 30 kW

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B With grooved bed 10 spindles Working width: 220 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 7.5 kW / 8–40 m/min Isdpfx Aou Udd Sebxsth Spindle arrangement: 1–Bottom (7.5 kW) – with hydro clamping 2–Right (7.5 kW) 3–Left (11 kW) 4–Right (7.5 kW) – with straight jointer 5–Left (7.5 kW) 6–Top (15 kW) – with hydro clamping 7–Bottom (7.5 kW) – with hydro clamping 8–Top (7.5 kW) – with hydro clamping and straight jointer 9–Bottom (7.5 kW) – with hydro clamping and straight jointer 10–Universal (7.5 kW) 6 powered rollers in the table