Skobeljnik

WEINIG Hydromat 23C

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Weinig Hydromat 23C s 6 vreteni. Ločen električni razdelilnik. Avtomatski sistem mazanja ležiščnih plošč. Maksimalne dimenzije 140 mm x 230 mm Št. 1: 11 kW - spodnji, 6000 obr/min, zunanji ležaj, pripravljeno za ravnalni rezkar Št. 2: 11 kW - desni, 6000 obr/min, pripravljeno za ravnalni in profilni rezkar Št. 3: 11 kW - levi, 6000 obr/min, pripravljeno za ravnalni in profilni rezkar Št. 4: 15 kW - zgornji, 6000 obr/min, zunanji ležaj, pripravljeno za rezkar Št. 5: 11 kW - zgornji, 6000 obr/min, zunanji ležaj, ravnalni rezkar Št. 6: 18,5 kW - spodnji, 6000 obr/min, zunanji ležaj, ravnalni rezkar Podajalnik 7,5 kW. 6–60 m/min (možna nastavitev hitrosti po potrebi). Vretena 50 mm. Nosilec 0,55 kW. Lrodpjxtwl Isfx Af Asw Priložena popolna dokumentacija. Možna dobava s hidro orodjem po potrebi. Možna dobava z vhodnim in izhodnim transportom po potrebi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Večlistna žaga Raimann ProfiRip KR 310 M s paketno čelilno žago HOLTEC ES 121SHKA in odsesovanjem Hurrican Model: Raimann ProfiRip KR 310 M Letnik: 2004 (obnovljeno 2022) Večlistna žaga z 2 nastavljivima žaginima listoma Tehnične podrobnosti: Tirna širina: 340 mm Skupna širina prehoda: Maksimalno 950 mm (namesto 800 mm) Višina reza z/brez pritrdilne plošče: 115 mm / 130 mm Dolžina obdelovanca: najmanj 450 mm Največji premer žaginega lista: 380 mm Lrodpfx Afow S S A Te Ajw Najmanjši premer žaginega lista: 250 mm Luknja žaginega lista: 80 mm Premer žagine gredi: 65 mm Število vrtljajev žagine gredi: 3900 obr/min Motor: 30 kW Laserski kazalniki: 3 kosi Obratovalni tlak: 6 bar Brezstopenjska hitrost podajanja: 8-48 m/min Podajalni motor: 1,5 kW Napetost: 400V / 50Hz

Stanje: zelo dobro (rabljeno), working width 230 mm working height 120 mm 6 heads Ljdpow Ad H Tjfx Af Asrw feed speed 60 m/min head configuration: bottom/right/left/top/top/bottom spindle motors 7.5 kW each automatic table lubrication Memory System Automatic control spindle diameter 40 mm spindles double-sided supported last two heads equipped with manual jointer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, premer vretena: 40 mm, delovna višina: 120 mm, število vreten: 6, Planing and Moulding Automatic Four-Side Planer Manufacturer: Weinig Ljdpfx Afjv T R A Ds Asrw Model: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic memory control system Spindle diameter: 40 mm Spindles with double-sided bearings The last two heads are equipped with jointers

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram Lrjdstynpxjpfx Af Aow + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Weinig Hydromat 23C s 6 vreteni. Ločen električni razdelilnik. Avtomatski sistem mazanja ležiščnih plošč. Maksimalne dimenzije 140 mm x 230 mm Št. 1: 11 kW - spodnji, 6000 obr/min, zunanji ležaj, pripravljeno za ravnalni rezkar Št. 2: 11 kW - desni, 6000 obr/min, pripravljeno za ravnalni in profilni rezkar Št. 3: 11 kW - levi, 6000 obr/min, pripravljeno za ravnalni in profilni rezkar Št. 4: 15 kW - zgornji, 6000 obr/min, zunanji ležaj, pripravljeno za rezkar Št. 5: 11 kW - zgornji, 6000 obr/min, zunanji ležaj, ravnalni rezkar Lsdpfxsxgq Rde Af Ajrw Št. 6: 18,5 kW - spodnji, 6000 obr/min, zunanji ležaj, ravnalni rezkar Podajalnik 7,5 kW. 6–60 m/min (možna nastavitev hitrosti po potrebi). Vretena 50 mm. Nosilec 0,55 kW. Priložena popolna dokumentacija. Možna dobava s hidro orodjem po potrebi. Možna dobava z vhodnim in izhodnim transportom po potrebi.

Stanje: zelo dobro (rabljeno), Weinig Hydromat 23C s 6 vreteni. Maksimalna širina: 245 mm Maksimalna debelina: 160 mm Ločena električna omarica. Ločena daljinska upravljalna plošča. Avtomatski mazalni sistem za vodilne ploskve. Polna robustna zvočna izolacija. Podajalni motor 15 kW, 100 m/min Lrodpfxsrn Snmo Af Aow Vretena: 1. 7,5 kW – spodnje, 6000 obr/min, prilagojeno za ravno čelno rezkanje 2. 11 kW – desno, 6000 obr/min, prilagojeno za ravno in profilno čelno rezkanje 3. 15 kW – levo, 6000 obr/min, prilagojeno za ravno in profilno čelno rezkanje 4. 15 kW – zgornje, 6000 obr/min + zunanji ležaj, prilagojeno za ravno in profilno čelno rezkanje 5. 30 kW – zgornje, 6000 obr/min + zunanji ležaj, prilagojeno za ravno in profilno čelno rezkanje 6. 15 kW – spodnje, 6000 obr/min + zunanji ležaj, prilagojeno za ravno in profilno čelno rezkanje Vretena 50 mm Dvigovalni nosilec 0,55 kW Celotna dokumentacija priložena. Robustna zvočna izolacija. Možnost dobave s hidro orodjem po potrebi. Možnost dobave s popolno mehanizacijo po potrebi.

Stanje: zelo dobro (rabljeno), JET is a numerically controlled machining center with 5 interpolated axes, designed for the following machining operations: Tenoning / Finger jointing / Drilling Mortising / Milling / 4/5-axis profiling. Lrjdpfx Afjirmyqs Aow Technical specifications: Fully digital NC axes: 5 Interpolated linear axes: 3 Interpolated rotary axes: 2 Longitudinal axis X: 1,800 / 2,200 mm Transverse axis Y: 1,300 mm Vertical Z axis: 650 mm Clamping table length: 1,400 / 1,800 mm One axis - unlimited C-axis: +/- 180°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Lrsdpfowya Syex Af Aow Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item No.: SK-K-24001 DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, The following machines, all in excellent condition, are available for sale – ideal for professional use in wood processing. Saw line consisting of: • Infeed Device ZV21, Model EV 50 • Profiling Chipper ZD31, Model VM50 • Outfeed Device AV31, Model VZM • Centering Device VZ21, Model VZV • Log Rotator DV21, Model DV70-2 • Infeed and Centering Unit EVP • Profiling Chipper VM50 • Profiling Unit VMP450 F61 (4x110kW) • Microtec Measuring System Additionally Available Further used woodworking machinery ?️ Additionally available: Further used woodworking machinery Log Handling Springer  • 5-arm design  • Log Sorter (5-arm)  • Receiving Log Feeder (26 m) Log Rotator LINCK DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t  • State-of-the-art rotation technology for precise positioning 2 Units of Chipper Infeed – Infeed and Centering Unit EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separating Conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 Units LINCK Chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Saw VS 66 – Left & Right Side  • Dimensions: 2.8 m x 2.1 m x 2.5 m each  • Weight: 3 t each LINCK Pre-centering Unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log handling system with feeder and log conveyor Location & Availability Lrjdew Stiuepfx Af Asw All machines are located in our warehouse at A-3525 Lugendorf Nr. 38 and are available for immediate delivery. Price on request For further information or to arrange a viewing appointment, please feel free to contact me.