Weinig Hydromat 23 nakup rabljenega (495)

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B With grooved bed 10 spindles Working width: 220 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 7.5 kW / 8–40 m/min Spindle arrangement: 1–Bottom (7.5 kW) – with hydro clamping 2–Right (7.5 kW) 3–Left (11 kW) 4–Right (7.5 kW) – with straight jointer 5–Left (7.5 kW) 6–Top (15 kW) – with hydro clamping Nkedpfx Adeu Udd Ssvow 7–Bottom (7.5 kW) – with hydro clamping 8–Top (7.5 kW) – with hydro clamping and straight jointer 9–Bottom (7.5 kW) – with hydro clamping and straight jointer 10–Universal (7.5 kW) 6 powered rollers in the table

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Four-Side Planer/Moulder Manufacturer: Weinig Model: U 23 EL Year of manufacture: 1999 Number of spindles: 8 Working width: 20 – 230 mm Working height: 8 – 120 mm Straightening table length: 2,500 mm Feed motor: 4 kW Feed speed: 4 – 24 m/min Total connected load: approx. 60 kW Nodpfx Ajvy Ebusdvokw 1st spindle: Bottom, horizontal 7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 125 – 180 mm 2nd spindle: Right, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 112 – 250 mm 3rd spindle: Left, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 112 – 200 mm 4th spindle: Right, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 112 – 250 mm 5th spindle: Top, horizontal 7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 112 – 200 mm 6th spindle: Bottom, horizontal 7.5 kW, 50 mm diameter, 7,200 rpm, Tool diameter: 112 – 250 mm 7th spindle: Top, horizontal 7.5 kW, 50 mm diameter, 7,200 rpm, Tool diameter: 112 – 250 mm 8th spindle – Saw unit: Top, horizontal 2.2 kW, 40 mm diameter, 8,000 rpm, Tool diameter: 180 mm Includes two feed tables

Stanje: dober (rabljeno), Leto izdelave: 1999, Delovna širina 13-230 mm Delovna višina 6-120 mm 4 vretena u-r-l-o Moč motorja podajanja 1,5 kW Števec Sico Jekleni podajni valji Nkjdpfx Aox U Ru Uedvow Ena izhodna gumijasta valja Zunanje mere pribl. D x Š x V: 3100 x 1400 x 2000 mm Teža pribl. 2000 kg Podatki so iz prospekta, zato brez garancije

Stanje: zelo dobro (rabljeno), delovna širina 230 mm delovna višina 120 mm Nodspkwaxepfx Advokw 5 glav moč motorjev 5,5/5,5/7,5/7,5 kW razporeditev glav: spodnja/desna/leva/zgornja/spodnja sistem mazanja mize pnevmatski pritisni valji za vlečne rolice nastavitev glav v dveh oseh hitrost vretena 6000 obr./min el. nastavitev pritisne letve pomik s kardanovimi gredmi neprekinjena nastavitev hitrosti pomika težka zvočno izolirana kabina

Stanje: rabljeno, Leto izdelave: 1994, AUTOMATIC 5-SPINDLE MOULDER WEINIG MOD. PROFIMAT 23 – USED Nkjdpfx Asrm Rxwodvsw Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle - 5) Bottom horizontal spindle Working width: 230 mm Year: 1994 Voltage: 380/50

Stanje: rabljeno, Leto izdelave: 2002, 5+1 SPINDLE MOULDER WEINIG MODEL PROFIMAT 23 FORTEC - CE COMPLIANT - USED - Equipped with ATS device - 1st lower horizontal spindle - 2nd right vertical spindle - 3rd left vertical spindle - 4th upper horizontal spindle - 5th lower horizontal spindle - 6th universal spindle - Working width: 230 mm - Cardan shaft feed Nkedpfxewrx Nbo Advow - Year: 2002

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1999, širina skobljanja: 230 mm, skupna višina: 120 mm, Štiristranski skobeljni stroj / Avtomat za profiliranje Proizvajalec: Weinig Model: Profimat 23 E Nedpfxjygcl Io Advskw Leto izdelave: 1999 Za štiristransko skobljanje in profiliranje Maks. širina skobljanja: 230 mm Maks. višina skobljanja: 120 mm 5 vreten Premer vretena: 40 mm Razporeditev vreten: Spodaj, ca. 4 kW Desno + levo, ca. 5 kW Zgoraj, ca. 4 kW Spodaj, ca. 4 kW Priklop: 380 V, 50 Hz

Stanje: dober (rabljeno), Leto izdelave: 1996, Weinig Unimat 23 Four-Sided Planer Njdpfx Ash Dwl Dodvskw – Manufactured in Germany – Ribbed table – Year of manufacture: 1996 – Feed rollers embedded in the table TECHNICAL SPECIFICATIONS: planing width: 230 mm planing height: 160 mm ribbed table spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW infinitely adjustable feed speed: 6–36 m/min feed motor power: 5.5 kW six driven top steel rollers two driven top rubber rollers three feed rollers in the table pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of infeed table: 1970 mm electric height adjustment central lubrication (divided) diameter of dust extraction outlets: 140 mm machine dimensions (L/W/H): 410 / 200 / 180 cm weight: approx. 3000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, working width 250 mm working height 140 mm 8 heads 3 toothed feed rollers on the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom variable feed speed up to 100 m/min spindle diameter 50 mm spindles supported on both sides feed via cardan shafts spindle speed 6000 rpm pneumatic pressure on feed rollers head adjustment in two axes cast iron body Nkjdpfxjx Sw T Se Advow

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E ----- 6 spindles (including 2 x right), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 – 230 mm Working height: 8 – 120 mm 1st spindle (bottom), 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 125 – 180 mm Rabbetting device incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle (right), 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle (left) ----- Shared motor with 2nd spindle Diameter: 40 mm Nkjdpfx Adsxz Hh Usvew Speed: 8,000 rpm Tool circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. side pressure roller, spring-loaded 4th spindle (right), 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle (top), 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circles: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool circle and can be swung away from tool, spring-loaded 6th spindle (bottom), 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles – general ----- All moulding spindles with high concentric accuracy Lubrication points for axial spindle movement Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely adjustable from 5–24 m/min Infeed roller in front of 1st lower tool, pneumatically controlled up/down Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustable feed roller travel relative to left spindle, axial 35 mm Electrical system ----- Operating voltage: 440 V (voltage range 380–420 volts), 50 Hz Machine base, tables, and fences ----- Jointing table 2.0 m long (incl. jointer guide) Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindle Nos. 3 and 5 Min. working height: 12 mm Electric height adjustment of top spindles and feed Central position of lubrication points on front of machine Electronic digital displays on spindle 3 and 5 (axial), spindle 6 (radial), spindle 4 (axial and radial) Safety and noise protection ----- Full safety enclosure Easy high...

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Four-sided planer with 8 heads. Head configuration: bottom horizontal, right vertical, left vertical, top horizontal, right vertical, bottom horizontal, top horizontal, and the last one is universal. A new frequency inverter and new cables have been installed, with stepless feed speed adjustment. The machine has undergone a complete overhaul. Weight: 4600 kg. Njdpsvtpk Hofx Advokw

Stanje: rabljeno, Complete production line for manufacturing slatted frames (bed bases). From wood processing all the way to final assembly/packaging. Nkedpjx S Scbjfx Advew Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system - ISE CNC drilling and sawing system with stacking unit - 2 x ISE CNC woodworking centers / drilling systems - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine - Panhans spindle moulder - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Stanje: rabljeno, Leto izdelave: 2000, Complete production line for manufacturing slatted frames (bed bases). From wood processing all the way to final assembly/packaging. Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system - ISE CNC drilling and sawing system with stacking unit - 2 x ISE CNC woodworking centers / drilling systems - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine Nedpfox S Sb Dex Advekw - Panhans spindle moulder - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Stanje: dober (rabljeno), Weinig Hydromat H23, 8-vretenčna 50 mm vreteni, 6.000 min⁻¹ Nkjdpfx Adeyrrh Nevjw Spodnje vreteno 7,5 kW, pripravljeno za robljenje Desno vreteno 7,5 kW, pripravljeno za vzdolžno robljenje Levo vreteno 15 kW, pripravljeno za vzdolžno in profilno robljenje Desno vreteno 11 kW, pripravljeno za profilno robljenje Zgornje vreteno 15 kW, pripravljeno za robljenje Spodnje vreteno 18,5 kW, pripravljeno za robljenje Zgornje vreteno 11 kW, pripravljeno za vzdolžno in profilno robljenje, z zunanjim ležajem Spodnje vreteno 7,5 kW, pripravljeno za vzdolžno in profilno robljenje, z zunanjim ležajem Pogon podajalnika 7,5 kW Avtomatski sistem za mazanje Popolna težka zvočna zaščitna kabina Možnost dobave z dovodom in odvodom za štiristranski skobeljni stroj po potrebi. Možna dobava orodja po potrebi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Weinig H1000 skobeljni stroj Weinig Hydromat 1000 s 5 vreteni. (Leto 2012) Nedpjyrrc Hjfx Advskw Ločena elektro omarica Ločeno daljinsko upravljalno ploščo Avtomatski sistem mazanja vodilnih plošč Sistemski spomin Popolno zvočno ohišje Št. 1. 7,5 kW – spodaj 6000 obr/min + zunanji ležaj + ravni nož Št. 2. 7,5 kW – desno 6000 obr/min + profilni nož Št. 3. 7,5 kW – levo 6000 obr/min + profilni nož Št. 4. 7,5 kW – zgoraj 6000 obr/min + zunanji ležaj + ravni nož Št. 5. 7,5 kW – spodaj 6000 obr/min + zunanji ležaj + ravni nož 50mm vretena Potisna gred 0,55 kW Celotna dokumentacija priložena. Odvzemni razdelilec priložen. Možnost dobave z mehanizacijo Weinig po potrebi (Leto 2012)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Weinig H1000 skobeljni stroj z E3 dovodom in A3 odvodom Weinig Hydromat 1000 s 5 vreteni (leto 2012). Ločena električna omarica Ločena daljinska upravljalna plošča Avtomatski mazalni sistem za obdelovalne mize Sistem za pomnjenje Popolna protihrupna zaščita Weinig E3 dovodni skobeljni stroj + paketni škarjasti dvigalo (3000 kg). Weinig A3 odvodni skobeljni stroj + paketni škarjasti dvigalo (3000 kg) + paketni verižni transporter. Št. 1. 7,5 kW – spodnje vreteno, 6000 obr/min + zunanji ležaj + ravno rezilo Št. 2. 7,5 kW – desno vreteno, 6000 obr/min + profilno rezilo Št. 3. 7,5 kW – levo vreteno, 6000 obr/min + profilno rezilo Št. 4. 7,5 kW – zgornje vreteno, 6000 obr/min + zunanji ležaj + ravno rezilo Št. 5. 7,5 kW – spodnje vreteno, 6000 obr/min + zunanji ležaj + ravno rezilo Vretena 50 mm Premik 0,55 kW Vsa dokumentacija priložena. Vključen je tudi odsesovalni zbiralnik. Nodoyrrbpspfx Advekw

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel Nkodpfexpn T Uox Advew > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!)

Stanje: rabljeno, Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 pcs. Weinig Hydro Planer Type Uniplan 23 ----- Machine factory-refurbished by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter-bearings without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remotely operable with closed hood. Machine with continuous, chainless feed system equipped with rubber rollers. Electric height adjustment of spindles according to mechanical digital display (SIKO). Limit switch for height adjustment. Feed roller pressure pneumatic. Stops and table plates non-adjustable. Machine with steel table plates. Machine fully enclosed with integrated sound and dust protection, including internal lighting. Nodpfx Ajxpn Tzodvjkw Electrical execution according to DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC - 204 - 1. No other electrical regulations considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before using existing tools whether they are suitable for this speed. Please also take this into account when ordering new tools. Technical specifications: Working width max.: 230 mm Working height min.: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Each horizontal spindle: 7.5 kW (7.5 HP) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed clamping offset below: 0.5 mm (Technical data according to manufacturer – subject to change!)

Stanje: rabljeno, Število vreten: 8 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Weinig skobljalna linija ----- Sestavljeno iz naslednjih posameznih strojev: Nksdoxpn Tujpfx Advjw Poz. 1: Weinig Profimat 23 E, štiristranski skobeljni stroj, številka zaloge: 2803 5 vreten + žaga za steklene letve Poz. 2: Weinig Uniplan 23, številka zaloge: 2804 Fini in hidro skobeljni stroj z 2 horizontalnima vretenoma Poz. 3: Weinig RF 15, številka zaloge: 2805 Vzdolžno-prečno-vzdolžni transporter z vračanjem obdelovanca k operaterju Podrobni opisi strojev so na voljo pod navedenimi številkami zaloge. (Tehnični podatki po navedbah proizvajalca, brez jamstva!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, delovna širina: 220 mm, višina skobljanja: 140 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 140 mm, moč pogonskega motorja podajalnika: 15.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 7, vhodna frekvenca: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, Working height: 140 mm, Nkodpfjulnr Aex Advsw Spindle diameter: 50 mm, Feed: 15 kW / 6 – 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-Bottom (7.5 kW) with hydraulic clamping 2-Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-Bottom (7.5 kW) with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-Bottom (11 kW) with hydraulic clamping, straight jointer and profile jointer 6 powered feed rollers in the table

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, delovna širina: 250 mm, višina skobljanja: 160 mm, premer vretena: 50 mm, širina skobljanja: 250 mm, delovna višina: 160 mm, skupna masa: 10.000 kg, moč pogonskega motorja podajalnika: 30.000 W, največja hitrost vretena: 6.000 obr/min, vrsta nastavitve višine: mehanski, premer gredi skobeljnika: 50 mm, vrsta vhodnega toka: trifazni, dolžina mize: 1.000 mm, število vreten: 9, vhodna frekvenca: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, Working height: 140 mm, Spindle diameter: 50 mm, Feed: 30 kW / 6 - 65 m/min, Spindle configuration: 1-Bottom (11 kW) - with hydraulic clamping 2-Right (7.5 kW) 3-Left (11 kW) 4-Left (7.5 kW) 5-Right (7.5 kW) Nkodpfsqvml Rjx Advsw 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-Bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Stanje: dober (rabljeno), Leto izdelave: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with individual 7.5 kW motor and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter axial stops milled to 35 mm height 3. Left spindle with individual 7.5 kW motor Speed: 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter radial pneumatic pressure guide left, for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC axis radial Pneumatic control axial, adjustment range 40 mm, glazing bead ejection, pneumatically sequenced - Feed system with 4 kW motor and feed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, workpiece monitoring, operator terminal, free-standing control cabinet, free-standing operator console, magnetic interlock for safety hood - Enhanced sound insulation - Automatic infeed and workpiece preparation system for various workpiece lengths and widths Workpiece dimensions: Length: 400–3,500 mm (up to 4,000 mm) Width: 40–200 mm Thickness: 20–100 mm Driven conveyor belt Belt width: 250 mm, conveying length: 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Fine Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC axis radial Nksdowyuluopfx Advjw - First feed roller sequenced with photo cells - NC axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight-knife heads 501 with HSS planer knives 30 mm x 3 mm, max. 9,000 rpm, dim. 163 mm x 230 mm x 50 mm, Z=4

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Sided Planer Profimat 23, window version with glass bead separation (can also be used as a grooving spindle) ATS control and program control ----- Machine is currently being overhauled and functionally tested Technical data summary (please ask for details on any additional included accessories) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically cycling up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically cycling up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter Nkodju Su Huopfx Advsw > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glass bead separation or usable as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Joint operation of the right spindle and the glass bead discharge via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planer heads available (technical data according to manufacturer – subject to prior sale and not guaranteed!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 5.300 mm, hitrost pomika os X: 60 m/min, delovna širina: 230 mm, premer vretena: 180 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 9.000 W, največja hitrost vretena: 6.000 obr/min, vrsta nastavitve višine: električni, število vreten: 6, moč: 127 kW (172,67 KM), vhodni tok: 241 A, premer napajalnega valja: 140 mm, Oprema: motorna zavora, Popolna in delujoča skobeljna linija Hydromat 3000 z delilnim rezilom. Idealna za avtomatizirano proizvodnjo fasadnih/ talnih oblog in strešnih letev. Linija vključuje: avtomatsko podajanje z razkladalno nagibno mizo, posamezno podajanje desk v skobeljnico, postajo za minibundlanje, čelilnik ter avtomatsko zlaganje v pakete. Končni paket se avtomatsko spusti na vmesni transportni trak za PET-ovijanje. Linija se prodaja zaradi nadgradnje kapacitet. Nedpfork Nklsx Advjkw Več informacij o liniji na zahtevo.

Stanje: dober (rabljeno), working width 230 mm working height 120 mm spindle diameter 40 mm 4 heads + glazing bead cutting unit control via ATS panel two-axis head adjustment Nkodovtt Ayepfx Advew electric adjustment of the pressure beam variable feed speed adjustment The machine operated in-line with other machines.