Štiri stransko skobljalo

WEINIG Profimat 23 Fenster

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Nsdexpn T Uepfx Ab Iodd Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!)

Stanje: generalkompletno obnovljen (rabljeno), LBL Brenta Band Saw CT 700 Nodpfx Aeucp N Asb Iedd Max. Cutting Depth = 150 mm Max. Cutting Height = 650 mm 9 Blades Free Center Disk, Overheat Protection Clearance = 800 mm Fast, precise positioning via servo motor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the package. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (angled cutting) Maximum log width: 1250/1090 mm Maximum cutting length: 8 m Main motor: 45 kW Cast iron wheels Wheel width: 130 mm Wheel diameter: 1200 mm Vertical lifting (up/down): dual TR60x9 (18) screw system + 11 kW Danfoss frequency inverter + Siemens 3-phase motor with brake Njdjw E Ei Ujpfx Ab Ijdd Electrical motor for head up/down: 11 kW PV 45 bandsaw blade, length: 8685 mm, thickness: 1.2 mm, width: 140 mm / 150 mm Powered feed with electronic forward and reverse control, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electrical deactivation Digital thickness setting with Wravor V280 program Hydraulic power unit 40 l, tank with two pumps 13+6 l + 3 kW motor Complete hydraulic system Hydraulic bandsaw blade guide left and right HIWIN linear guides Hydraulic debarker / bark cutter 1 Hydraulic board ejector arm 1 Additional hydraulic ejector arm & board alignment guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 pipe holders: 1 Water cooling – automatic booster pump cooling (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication: 1 TRACK: Welded structure, 14 m length Hydraulic clamp with two cylinders: 6 Hydraulic log turner: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter on holders (mechanical roller): 4 Hydraulic log lifter on holders (hydraulic roller): 7 Set of lifting rollers: 7 hydraulic + 4 m: 1 New type hydraulic log turner: 3 Log centering device – 1 set: 4 Hydraulic aggregate 120 l, tank with single 50 l pump, 15 kW motor + Danfoss frequency inverter: 1 Cable carrier with energy chain: 14.5 C-profile support for ventilation – 4 double trolleys Belt outfeed conveyor 4 m with 1 m feed section + 3 kW electromotor, front part with hydraulic lifting

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 240 mm Planing height: 200 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L/W/H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window manufacturing ----- Machine is cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Njdpfovnv Uzsx Ab Ijdd Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air cushion lubrication in the worktable 2 x milling units with belt drive with quick-change HSK 85 system at positions 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning at positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning at positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) at positions (3 – 4 – 5) Mobile 10 control system PRL equipment for cutting out glazing beads on 2nd upper horizontal spindle Machine is offered without tooling (Technical specifications according to manufacturer – subject to change!)

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system Nsdpfotynpxjx Ab Iedd • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: novo, Leto izdelave: 2025, Ročni upogibni in kotni stroj SM 1270x2 mm je naprava za upogibanje različnih elementov iz pločevine z največjo dolžino 1270 mm in največjo debelino pločevine 2 mm. Običajno se upogibni stroji uporabljajo za izdelavo strešnih elementov, prezračevalnih elementov, elementov odtočnih sistemov ipd. Ročni kotni in zabojičarski stroj SM 1270 zaradi posebnih segmentiranih letev omogoča dodatno izdelavo škatel in fasadnih kaset poleg standardnih upognjenih elementov. Segmentirana letva je sestavljena iz delov različnih dolžin, ki jih je mogoče prilagoditi potrebni dolžini za upogibanje škatel in kaset na vseh štirih straneh. Proizvajamo naslednje modele ročnih kotnih in zabojičarskih upogibnih strojev: - Ročni kotni in zabojičarski upogibni stroj SM-1270 x 2 mm - Ročni kotni in zabojičarski upogibni stroj SM-1550 x 1,8 mm - Ročni kotni in zabojičarski upogibni stroj SM -2020 x 1,2 mm V standardni opremi imajo ti ročni stroji dve segmentirani letvi: zgornjo letvo in rotacijsko letvo. Zgornja letva ima kot 135°, kar omogoča upogibanje elementov do največ 135°. Standardna oprema ročnega kotnega in zabojičarskega stroja SM vključuje: - Ročni kotni in zabojičarski upogibni stroj Ndodpfjf Eywwox Ab Ied - Naprava za merjenje kotov - Štiripoložajni omejevalnik kota - Dva segmenta s stranskimi izrezi za upogibanje kaset z notranjimi upogibi Dodatne možnosti: - Tretja segmentirana letva - Kaljenje segmentov (v standardni opremi segmenti niso kaljeni, za obdelavo pločevine, debelejše od 1 mm, priporočamo kaljene segmente – posledično večja togost segmentov in daljša življenjska doba stroja) - Sprememba višine zgornjih segmentov (od 30 do 45 mm), kar omogoča upogibanje kaset do višine 45 mm namesto 30 mm - Prečno rezilo za rezanje pločevine pred upogibanjem; največja debelina pločevine za rezanje je 0,8 mm - Večnamizna sprejemna miza za nastavitev različnih omejevalnikov dolžine na različnih delih stroja; tako prihranite čas pri serijski proizvodnji kaset oziroma elementov enake velikosti. Dimenzije: 160,00 cm x 82,00 cm x 120,00 cm Teža: 350,00 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item No.: SK-K-24001 DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement Ndjdpowya Syofx Ab Iod The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Longitudinal profiling machine for parquet 4+4 motors Nodpfx Ajvxz Sysb Ijdd Minimum working width: 80 mm Tongue and groove profile (M+F)

Leto izdelave: 1999, Stanje: rabljeno, The DSG 200 vertical sawmill is the ideal choice for woodworking shops specializing in furniture and wooden flooring production, offering high efficiency and reliable performance in daily operations. The used Wintersteiger mini band saw for wood is a very good investment—its major advantage over standard machines of this type is its compact footprint, while still excelling in material processing. It is designed for splitting individual elements and sizing them to the required dimensions. Operation of this machine is not particularly complicated and can be mastered quickly. The main advantage of our sawmill is its comprehensive equipment, most notably the saw blade lubrication system, controlled from the panel, which enables precise cutting of wet material. It features independent upper roller height adjustment for quicker cutting height changes. A pneumatic feed pusher supports material feed. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel - Feed rate: up to 2 m/min - Saw frame stroke: 210 mm - 400 strokes per minute - Cutting height, steplessly adjustable on our frame: 45–250 mm - Maximum achievable cutting height: 400 mm - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Saw kerf: 0.9–1.1 mm depending on cutting height - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm - Weight: 5000 kg Pneumatic feed pusher included Supplied with the machine: - complete large saw blade frame - small saw blade frame - frame pins - frame tensioning wedges - saw blade spacers - wet-cutting saw blades Nedstvm Hdopfx Ab Isdd - dry-cutting saw blades - set of upper transport rollers - 4 lower transport rollers - complete set of slides - frame yokes - pocket cutting guides - loading magazines - DTR documentation - electrical diagram

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, The following machines, all in excellent condition, are available for sale – ideal for professional use in wood processing. Saw line consisting of: • Infeed Device ZV21, Model EV 50 • Profiling Chipper ZD31, Model VM50 • Outfeed Device AV31, Model VZM • Centering Device VZ21, Model VZV • Log Rotator DV21, Model DV70-2 • Infeed and Centering Unit EVP • Profiling Chipper VM50 • Profiling Unit VMP450 F61 (4x110kW) • Microtec Measuring System Additionally Available Further used woodworking machinery ?️ Additionally available: Further used woodworking machinery Log Handling Springer  • 5-arm design  • Log Sorter (5-arm)  • Receiving Log Feeder (26 m) Log Rotator LINCK DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t  • State-of-the-art rotation technology for precise positioning 2 Units of Chipper Infeed – Infeed and Centering Unit EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separating Conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 Units LINCK Chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Nsdow Stiujpfx Ab Iodd Saw VS 66 – Left & Right Side  • Dimensions: 2.8 m x 2.1 m x 2.5 m each  • Weight: 3 t each LINCK Pre-centering Unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log handling system with feeder and log conveyor Location & Availability All machines are located in our warehouse at A-3525 Lugendorf Nr. 38 and are available for immediate delivery. Price on request For further information or to arrange a viewing appointment, please feel free to contact me.