Weinig Unimat 23 E nakup rabljenega (473)

Stanje: zelo dobro (rabljeno), Catalogue number: 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: Gcsdjrwmr Nepfx Ab Tja 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 170 mm 3) Left vertical: 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal: 230 mm, 11 kW 5) Top horizontal: 230 mm, 7.5 kW 6) Bottom horizontal: 230 mm, 11 kW - All spindles adjustable up/down, right/left - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric brake - 6 infeed, feed, and toothed rollers from above, including 1 double roller - Double rubber-coated outfeed feed roller from above - Double rubber-coated outfeed feed roller from below - Side pressure - Feed via cardan shafts - Pneumatically pressed rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric thickness adjustment - Motor for raising machine body: 0.55 kW - Central lubrication of the table - Extraction port diameter: 6 x 140 mm - Dimensions (L x W x H): 4900 x 2400 x 2000 mm - Weight: approx. 4,000 kg ADVANTAGES – German-made, WEINIG brand – 6 heads – Unpainted – Used planer, very good condition Original photos Net price: 142,900 PLN Net price: 34,000 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary due to currency fluctuations)

Stanje: rabljeno, Leto izdelave: 2000, Planing and Moulding Machine Weinig Unimat 23E for four-sided planing and profiling of timber, equipped with a mobile spindle for automatic adjustment and grooved bed (optional without grooved bed) for short and curved workpieces, as well as a long jointer table. Included: Set of grooved bed cutters Optional: Conversion to a conventional smooth table available on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Gcsdowztw Sopfx Ab Tsa Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E ----- 6 spindles (including 2 x right), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 – 230 mm Working height: 8 – 120 mm 1st spindle (bottom), 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 125 – 180 mm Rabbetting device incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle (right), 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle (left) ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. side pressure roller, spring-loaded 4th spindle (right), 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle (top), 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circles: 112–200 mm Max. profiling depth: 35 mm Godsxz Hh Uopfx Ab Teca Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool circle and can be swung away from tool, spring-loaded 6th spindle (bottom), 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles – general ----- All moulding spindles with high concentric accuracy Lubrication points for axial spindle movement Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely adjustable from 5–24 m/min Infeed roller in front of 1st lower tool, pneumatically controlled up/down Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustable feed roller travel relative to left spindle, axial 35 mm Electrical system ----- Operating voltage: 440 V (voltage range 380–420 volts), 50 Hz Machine base, tables, and fences ----- Jointing table 2.0 m long (incl. jointer guide) Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindle Nos. 3 and 5 Min. working height: 12 mm Electric height adjustment of top spindles and feed Central position of lubrication points on front of machine Electronic digital displays on spindle 3 and 5 (axial), spindle 6 (radial), spindle 4 (axial and radial) Safety and noise protection ----- Full safety enclosure Easy high...

Stanje: rabljeno, Leto izdelave: 1999, Čtyřstranná srovnávací frézka Malý model Unimat 23 E Rok výroby: 1999 Sériové číslo: 88103 Podávací rychlost: 5/24 m/min Min./max. šířka obrobku: 20/230 mm Min./max. výška obrobku: 8/160 mm Průměr vřetena: 40 mm Délka podávacího stolu: 1950 mm Drážkované lože Gcjdpjwnh Sqsfx Ab Tea 1. vřeteno dole: 5,5 kW 2. a 3. vřeteno vpravo a vlevo: 11 kW 4. vřeteno nahoře: 15 kW 5. vřeteno horní strana: 11 kW 6. vřeteno dole: 5,5 kW Celkový výkon: 54 kW Celkový proud: 117 ampér Pojistka: 125 ampér Transportní rozměry: 4200 x 2000 x 2100 mm (d x š x v) Hmotnost: cca 4500 kg - Rok výroby: 1999 - Dokumentace k dispozici: ne - Certifikát CE k dispozici: ne - Sériové číslo: 88103 - Počet vřeten: 5 Finanční informace DPH: Uvedená cena je bez DPH DPH/režim rozdílové daně: DPH je odpočitatelná pro podnikatele Dodání a výkup kdykoliv možné pro veškeré průmyslové vybavení. Yorick Diebels

Stanje: zelo dobro (rabljeno), Štiristranski skobeljni stroj WEINIG Unimat 23 E maks. širina skobljanja 230 mm, višina skobljanja 130 mm, 5 vreten, Gcsdpfxsxvc Uaj Ab Tea Ročno nastavljanje dimenzij skobljanja, vretena: spodnja 7,5 kW; leva in desna 11 kW; zgornja 11 kW; spodnja 7,5 kW, motorji z zavorami, vretena premer 40 mm, vretena popolnoma nastavljiva, stroj ima 4 vlekalne valje v delovni mizi, primeren za mokri les, podajanje z gredami kardana z brezstopenjsko regulacijo, stroj se prodaja skupaj z glavami, vidnimi na vretenih, kardani niso izrabljeni, mize niso obrabljene, stroj deluje gladko, brez tresenja ali vibracij, skobeljni stroj je masiven v originalu, teža približno 5 t. Zelo dobro stanje, vse deluje.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 255 mm, višina skobljanja: 160 mm, premer vretena: 40 mm, širina skobljanja: 255 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 3.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, premer gredi skobeljnika: 40 mm, vrsta vhodnega toka: trifazni, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Gcedpfsxg Sa Hjx Ab Tsa Spindle configuration: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One powered outfeed roller integrated in the table.

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Delovna širina: 230 mm, delovna višina: 160 mm, število vreten: 5, premer vretena: 50 mm, moč vretena: 4x 5,5kW/2x 11kW, pomik: 24 m/min, dolžina vhodne mize: 3000 mm, aksialni hod vertikalnega vretena: 80 mm, aksialni hod horizontalnega vretena: 45 mm. Priključna moč: 126 kW, potreba po zraku: 8400-9600 m³/h, dimenzije stroja (X/Y/Z): pribl. 3500mm/2000mm/1800mm, teža: pribl. 3500 kg. Vključno z vgradno enoto Weinig EM-11 in ustreznim razdelilnikom za odsesavanje. Dokumentacija na voljo. Možen je ogled na lokaciji. Gcodpfx Abju Damds Toa

Stanje: rabljeno, Avtomatski skobeljni in profilirni stroj Weinig Unimat 23E za štiristransko skobljanje in profiliranje lesa z utornim ležiščem za kratke in ukrivljene obdelovance ter mobilno vreteno in dolg ravnalni mizi. Delovna širina: 230 mm Delovna višina: 160 mm Vretena: 6 Vreteno 1: Spodaj / 5,5 kW / 50 mm Vreteno 2: Desno / 11 kW / 50 mm Gcsdsv Ec Ntepfx Ab Toa Vreteno 3: Levo / 11 kW / 50 mm Vreteno 4: Zgoraj / 5,5 kW / 50 mm Vreteno 5: Zgoraj / 5,5 kW / 50 mm Vreteno 6: Spodaj / 5,5 kW / 50 mm Dolžina ravnalne mize: 2.500 mm Pomik: 5,5 kW Aksialni hod vertikalnih vreten: 80 mm Aksialni hod horizontalnih vreten: 45 mm Paket za kratke kose: Da Utornica: Da Utornica rezkar: Vključeno Upravljanje: Mobilno vreteno

Stanje: rabljeno, Leto izdelave: 2000, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Infeed table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6-36 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E 6 spindles (2 x right), powerful motors, EM 11 infeed magazine optional Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 125 - 180 mm Rabbeting device incl. tool Hardened table insert before 1st bottom spindle 2nd spindle right: 11.0 kW ----- Common motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Common motor with 2nd spindle Diameter: 40 mm Gcodpjwqr Rvjfx Ab Tsa Speed: 6000 rpm Tool diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left spindle, incl. side spring-loaded pressure roller 4th spindle right: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top: 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe prior to top spindle, adjustable to tool diameter and swing-away, spring-loaded. 6th spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm General spindle information ----- All moulder spindles with high concentricity accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed steplessly adjustable 6 - 36 m/min Infeed roller before 1st bottom tool, pneumatically controlled (up/down) Durofer pointed tooth rollers (Weinig Patent) with depth limiter, self-cleaning Feed roller adjustment opposite left spindle, axial 35 mm Extension of pendulum axis opposite left spindles to 150 mm Machine electrics ----- Operating voltage: 380-400-415 volts, 50 Hz Machine base, tables and fences ----- Surfacing table 2.5 m long (incl. jointer fence) Aluminum extension 0.5 m for surfacing table, incl. jointer fence extension Manual Waxilit pump for table resin removal One powered rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swung away, opposite right spindles for easy tool change Machine operation ----- Pressure shoe before top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/E system, automatic 2-axis positioning for spindle no. 3 and 4 Min. working height 12 mm Electric height adjustment of top spindles and feed Central location of lubrication points on machine front Safety and noise...

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, premer vretena: 40 mm, delovna širina: 230 mm, hitrost pomika os X: 5 m/min, hitrost podajanja osi Y: 36 m/min, širina skobljanja: 20 mm, vrsta nastavitve višine: električni, višina skobljanja: 160 mm, delovna višina: 8 mm, Oprema: kabina, motorna zavora, Weinig Unimat 23 E 6-glavični skobeljni in profilirni stroj. Spodnja glava – 10 KM Gjdpfx Ajv A Rpcsb Toca Ograja + bližnja glava – 15 KM (skupni motor) 1. zgornja glava – 15 KM 2. zgornja glava – 15 KM 2. spodnja glava – 10 KM Hitrost vretena – 6000 vrt/min Podajalna hitrost – min. 5 / maks. 36 metrov na minuto Delovna širina – min. 20 mm / maks. 230 mm Delovna višina – min. 8 mm / maks. 160 mm Premer vretena – 40 mm Stroj je trenutno še v uporabi in ogled je več kot dobrodošel.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 230 mm, – nemška proizvodnja – leto izdelave 2001 – skupna moč 42 kW – vlečni valji v mizi TEHNIČNI PARAMETRI: Gedpew H Smhofx Ab Tsca – širina skobljanja: 230 mm – višina skobljanja: 170 mm – električna nastavitev višine – premer vretena: 40 mm – 1. spodnje vreteno: 7,5 kW – 2. levo vreteno: 11 kW – 3. desno vreteno – 4. zgornje vreteno: 11 kW – 5. spodnje vreteno: 5,5 kW – kontinuirano nastavljiv pomik: 6–38 m/min – moč motorja pomika: 4 kW – dolžina vstopne mize: 1000 mm – električne zavore – 5 zgornjih jeklenih vlečnih valjev – en zgornji gumijasti vlečni valj – 2 vlečna valja v mizi: eden zobati – zračni blazinasti element v mizi – pnevmatski pritisk – pomik na kardanskih gredah – premer odsesovalnih priključkov: 5 x 140 mm – centralno mazanje mize – dimenzije stroja (d/š/v): 390 / 210 / 230 cm – teža cca 4000 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna širina: 260 mm, višina skobljanja: 160 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 5.500 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 6, moč: 65 kW (88,38 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Unimat 23 E with 6 spindles, with hard coating. Working width: 260 mm Working height: 160 mm Spindle diameter: 40 mm Feed: 5.5 kW / 6 – 36 m/min Spindle configuration: 1-Bottom (11 kW) 2-Right + 3-Left (15 kW) 4-Top (11 kW) 5-Top (11 kW) 6-Bottom (11 kW) Air cushion table. Short piece package. Gedevbi Rvspfx Ab Tjca Four powered feed rollers in the table.

Stanje: rabljeno, Leto izdelave: 2005, Unimat 23 E: Working width (with cutter circle 140 mm): 20 – 230 mm Working height (with cutter circle 163 mm): 8 – 120 mm 1st spindle, lower horizontal spindle: 7.5 kW 2nd spindle, right vertical spindle: 11 kW (shared with left vertical spindle) 3rd spindle, left vertical spindle 4th spindle, upper horizontal spindle: 7.5 kW Spindle diameter: 50 mm each Spindle speed: 8,000 rpm each Feed system: 4 kW Mechanical feed continuously variable: 5–24 m/min Working table 2.5 m long (incl. straightening fence) Gjdovvkciepfx Ab Tjca Uniplan 23: Max. working width: 230 mm Min./max. working height: 15 mm / 120 mm Feed: 3 kW Horizontal spindles each 5.5 kW Feed speed, stepless: 6–36 m/min Spindle speed: 6,000 rpm Spindle diameter: 50 mm Clamping length for tooling: 240 mm Max. cutter circle: 163 mm Fixed bottom cutting depth: 0.5 mm Short-piece package for min. wood length: 280 mm Spindle brakes, mechanical up to 7.5 kW Brake system for feed up to 5.5 kW 1st feed roller synchronized with photoelectric cell - Spindle speed 7,200 rpm, including motor power 7.5 kW. - Improved sound insulation for complete safety enclosure. Location: Customer

Stanje: rabljeno, Planing and Moulding Machine Weinig Unimat 23EL for four-sided planing and profiling of wood, featuring a mobile spindle for automatic adjustment and a grooved bed for processing short and curved workpieces, as well as a long jointer table. Spindles: 10 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 11 kW / 40 mm Spindle 3: Left / motor shared with spindle 2 / 40 mm Spindle 4: Right / 11 kW / 40 mm Spindle 5: Left / 5.5 kW / 40 mm Spindle 6: Top / 11 kW / 40 mm Spindle 7: Bottom / 11 kW / 40 mm Spindle 8: Top / 7.5 kW / 40 mm Spindle 9: Bottom / 7.5 kW / 40 mm Gsdpfxow H Iv To Ab Tsca Spindle 10: Universal / 4 kW / 40 mm Working width: 230 mm Working height: 160 mm Feed: 5.5 kW / 6 - 36 m/min

Stanje: rabljeno, Leto izdelave: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with two-axis control for left and upper spindle, brand new control system (latest Weinig version). Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment for upper spindle: electrical Optional with/without feed Feed brake system: Yes Feed speed steplessly adjustable up to 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control type: PLC control Spindle position display: mechanical numeric indicator Infeed rollers before jointer: Yes Air cushion table: three-track Central lubrication point: Yes Description: short infeed table 1050 mm with internal light Gcedpfewwwkhox Ab Tsa Location: Nattheim

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 230 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 5.500 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, premer gredi skobeljnika: 40 mm, vrsta vhodnega toka: trifazni, število vreten: 9, moč: 95 kW (129,16 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, grooved bed Gcodpfx Absx Hkp Ns Tja working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6 – 36 m/min, spindle arrangement: 1-bottom (5.5 kW) 2-right (5.5 kW) 3-left (5.5 kW) 4-right (5.5 kW) 5-top (11 kW) 6-bottom (5.5 kW) 7-top (7.5 kW) 8-bottom (37 kW) 9-universal (11 kW) 5 powered rollers in the table

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Planing size 220 x 150 mm, grooved bed, electric height and width adjustment. Gcodpfx Abou Sntzs Toa Machine in operation, fully functional. CHF 14,500.00 excl. VAT. Ex location 4102 Frenkendorf, Switzerland.

Stanje: rabljeno, Leto izdelave: 1998, Unladen weight: 5,000 kg Dimensions (L x W x H): 450 x 200 x 180 cm Price: On request Four-Sided Planer Weinig Unimat 23 Year of manufacture: 1998 Serial number: 82747 Feed speed: 5/36 m/min Workpiece width min./max.: 20/230 mm Workpiece height min./max.: 8/160 mm Spindle diameter: 40 mm Pressure shoe bed 1st spindle (bottom): 7.5 kW 2nd spindle (right): 7.5 kW 3rd spindle (left): 7.5 kW 4th spindle (top): 7.5 kW 5th spindle (bottom): 7.5 kW 6th spindle (universal): 11 kW Total installed power: 55 kW Total current draw: 119 Amps Circuit protection: 125 Amps Transport dimensions: 4500 x 2000 x 1800 mm (LxWxH) Transport weight: +/- 5000 kg - Year of manufacture: 1998 - Documentation available: No - CE certificate present: No - Serial number: 82747 - Number of spindles: 6 - Spindle 1: - Motor output: 7.5 kW - Spindle diameter: 40 mm - Spindle 2: - Motor output: 7.5 kW - Spindle diameter: 40 mm Gsdpfxownh D To Ab Toca - Spindle 3: - Motor output: 7.5 kW - Spindle diameter: 40 mm - Spindle 4: - Motor output: 7.5 kW - Spindle diameter: 40 mm - Spindle 5: - Motor output: 7.5 kW - Spindle diameter: 40 mm - Spindle 6: - Motor output: 11 kW - Spindle diameter: 40 mm - Min. planing width: 20 mm - Max. planing width: 230 mm - Min. planing height: 8 mm - Max. planing height: 160 mm - Feed speed: - Min. feed speed: 5 m/min - Max. feed speed: 36 m/min - Power consumption: 119 A - Fuse: 125 A - Installed power: 55.0 kW - Transport dimensions: 4500 mm x 2000 mm x 1800 mm (L x W x H) - Transport weight: 5000 kg Financial Information: VAT: The price is plus VAT VAT/Margin scheme: VAT reclaimable for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: dober (rabljeno), Leto izdelave: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with individual 7.5 kW motor and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter axial stops milled to 35 mm height 3. Left spindle with individual 7.5 kW motor Speed: 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter radial pneumatic pressure guide left, for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC axis radial Pneumatic control axial, adjustment range 40 mm, glazing bead ejection, pneumatically sequenced Gcsdjwyuluspfx Ab Tja - Feed system with 4 kW motor and feed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, workpiece monitoring, operator terminal, free-standing control cabinet, free-standing operator console, magnetic interlock for safety hood - Enhanced sound insulation - Automatic infeed and workpiece preparation system for various workpiece lengths and widths Workpiece dimensions: Length: 400–3,500 mm (up to 4,000 mm) Width: 40–200 mm Thickness: 20–100 mm Driven conveyor belt Belt width: 250 mm, conveying length: 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Fine Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC axis radial - First feed roller sequenced with photo cells - NC axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight-knife heads 501 with HSS planer knives 30 mm x 3 mm, max. 9,000 rpm, dim. 163 mm x 230 mm x 50 mm, Z=4

Stanje: rabljeno, Protective hood / cover / flap for a planing machine Weinig Unimat 23 SP or similar. Gedpowuub Sofx Ab Toca Length: 1,150 mm Width: 1,550 mm Height: 1,100 mm

Stanje: dober (rabljeno), Groove bed for WEINIG Unimat 23 four-sided planer with 6 spindles. Used condition. Gsdjunbuvspfx Ab Tjca

Stanje: rabljeno, Oblični in cepilni avtomat Weinig Tip Unimat 23 SP za natančno skobljanje (oziroma predskobljanje) in cepljenje masivnega lesa v enem delovnem koraku. Stroj zagotavlja visoko kakovost obdelave in je idealen za učinkovito serijsko proizvodnjo v lesni industriji. Opcijsko na voljo: .: 100079 Ploski magazin Weinig EM12 Vretena: 4 Delovna širina: 230 mm Delovna višina: 120 mm Gjdpfjw I Dcdjx Ab Tsca Vreteno 1: spodaj (5,5 kW) Vreteno 2: zgoraj (5,5 kW) Vreteno 3: desno (11 kW) Vreteno 4: levo (11 kW) Podajanje: 5,5 kW

Stanje: dober (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 170 mm, premer vretena: 50 mm, širina skobljanja: 230 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 7.500 W, vrsta nastavitve višine: električni, premer gredi skobeljnika: 50 mm, število vreten: 8, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, 8 spindles, Working width: 230 mm, Working height: 180 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (7.5 kW) – Grooving spindle 2-Bottom (7.5 kW) 3-Right (11 kW) 4-Left (11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table Godpfx Aor Axwnsb Tjca

Stanje: rabljeno, Planing and moulding machine Weinig Hydromat 2000 for four-sided planing and profiling of timber with groove bed, without soundproof enclosure. Number of spindles: 5 Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Spindle 5: Top / 15 kW Working width: 230 mm Working height: 160 mm Gcjdpfermvhfox Ab Toa Spindle diameter: 50 mm

Stanje: rabljeno, Avtomatski skobeljni in profilirni stroj Weinig Unimat 22E za štiristransko skobljanje in profiliranje lesa, z utornim ležiščem za kratke in ukrivljene obdelovance, premično vreteno za spreminjajoče se širine, kompletom orodij za obdelavo ter dolgim poravnalnim delovnim pultom. Gedpfow Na Thjx Ab Teca Posebna cena iz skladišča. Vretena: 6 Vreteno 1: Spodaj (5,5 kW) Vreteno 2: Desno (4 kW) Vreteno 3: Levo (5,5 kW) Vreteno 4: Desno (5,5 kW) Vreteno 5: Zgoraj (7,5 kW) Vreteno 6: Spodaj (4 kW) Hitrost vrtenja: 6.000 min⁻¹ Premer vretena: 40 mm Delovna širina: 220 mm Delovna višina: 120 mm Premično vreteno: Da Utornoležišče: Da Podajanje: 5,5 kW / / 6-36 m/min