Unimat 23 E nakup rabljenega (72.381)

Stanje: zelo dobro (rabljeno), Catalogue number: 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 170 mm 3) Left vertical: 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal: 230 mm, 11 kW 5) Top horizontal: 230 mm, 7.5 kW 6) Bottom horizontal: 230 mm, 11 kW - All spindles adjustable up/down, right/left - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric brake - 6 infeed, feed, and toothed rollers from above, including 1 double roller - Double rubber-coated outfeed feed roller from above - Double rubber-coated outfeed feed roller from below - Side pressure - Feed via cardan shafts - Pneumatically pressed rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric thickness adjustment - Motor for raising machine body: 0.55 kW Lrsdpfxjx Syq Ts Adksi - Central lubrication of the table - Extraction port diameter: 6 x 140 mm - Dimensions (L x W x H): 4900 x 2400 x 2000 mm - Weight: approx. 4,000 kg ADVANTAGES – German-made, WEINIG brand – 6 heads – Unpainted – Used planer, very good condition Original photos Net price: 142,900 PLN Net price: 34,000 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary due to currency fluctuations)

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 13.145 h, skupna širina: 1.600 mm, skupna višina: 2.100 mm, Unladen weight: 3,500 kg Dimensions (L x W x H): 390 x 160 x 210 cm Price: On request - Year of manufacture: 2001 - Documentation available: No - CE marking available: Yes - CE certificate available: No - Serial number: 93572 - Operating hours: 13,145 - Number of spindles [pcs]: 6 - └ Spindle 1: - Motor power [kW]: 7.5 - Tool available: Yes - └ Spindle 2: - Motor power [kW]: 15 - Tool available: Yes - └ Spindle 3: - Motor power [kW]: 15 - Tool available: Yes - └ Spindle 4: - Motor power [kW]: 15 Ljdpfx Adeyu Shhsksri - └ Spindle 5: - Motor power [kW]: 11 - Tool available: Yes - └ Spindle 6: - Motor power [kW]: 11 - Tool available: Yes - Max. planing width [mm]: 230 - Infeed table length [mm]: 1200 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 4 - Extraction nozzle diameter [mm]: 140 - Options: Powered rollers in the table - Voltage [V]: 400 - Power consumption [A]: 139 - Fuse rating [A]: 160 - Power output [kW]: 64.0 - Transport dimensions: 3900mm x 1600mm x 2100mm (L x W x H) - Transport weight [kg]: 3500kg - Number of transport packages: 1 Financial Information VAT: The indicated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2000, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min WEINIG Planer and Moulder Unimat 23 E 6 spindles (2 on the right), powerful motors, optional infeed magazine EM 11 Working width: 20–230 mm Working height: 8–120 mm 1st spindle, bottom, 7.5 kW ----- Ljdpfx Adswqr Rvekeri Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–180 mm Rebate device Hardened table insert in front of 1st bottom spindle 2nd spindle, right, 11.0 kW ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, including side pressure rollers, spring-loaded 4th spindle, right, 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle, top, 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Segmented pressure shoe in front of top spindle, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. 6th spindle, bottom, 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm General spindle details ----- All profiling spindles with high concentricity accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed, steplessly adjustable: 6–36 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled for height Durofer pointed tooth rollers (Weinig patent) with depth limiter, self-cleaning Axial adjustment of feed rollers next to the left spindle: 35 mm Extension of the oscillating axis next to the left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 Volts, 50 Hz Machine base, tables, and fences ----- Surfacing table: 2.5 m long (incl. jointer fence) 0.5 m aluminum extension for surfacing table, incl. jointer fence extension Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swung away next to the right spindles for easy tool change Machine operation ----- Pressure shoe in front of top spindle with mechanical digital readout Outfeed after top spindle with mechanical digital readout ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height: 12 mm Electric height adjustment for top spindles and feed Central lubrication points on machine front Safety and noise protection ----- ...

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 255 mm, višina skobljanja: 160 mm, premer vretena: 40 mm, širina skobljanja: 255 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 3.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, premer gredi skobeljnika: 40 mm, vrsta vhodnega toka: trifazni, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Lrodpfxoxg Sa Hj Adkoi Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One powered outfeed roller integrated in the table.

Stanje: rabljeno, Leto izdelave: 2000, Število vreten: 5 kos Delovna širina: 230 mm Višina obdelave: 160 mm Pogonski motor podajalnika: 4 kW Podajalna hitrost: 5–24 m/min. Stružnica in profilirka Weinig Unimat 23E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev in utornim ležiščem (opcijsko brez utornega ležišča) za kratke in ukrivljene obdelovance ter z dolgim vijačnim vodilom. Opcijsko: Predelava na klasično gladko mizo, na zahtevo. Vreteno 1: Spodaj / 40 mm / 5,5 kW Vreteno 2: Desno / 40 mm / 7,5 kW Lrsdpswztw Sofx Adkji Vreteno 3: Levo / 40 mm / Skupni motor z vretenom 2 Vreteno 4: Zgoraj / 40 mm / 7,5 kW Vreteno 5: Spodaj / 40 mm / 5,5 kW

Stanje: rabljeno, Dolžina poravnalne mize: 2.500 mm Lodev Ec Ntopfx Adksri Delovna širina: 230 mm Delovna višina: 160 mm Aksialni hod horizontalnih vreten: 45 mm Aksialni hod vertikalnih vreten: 80 mm Paket za kratke kose: Da Utorna postelja: Da Utorni rezkar: Vključen Vreteno 1: Spodaj / 5,5 kW / 50 mm Vreteno 2: Desno / 11 kW / 50 mm Vreteno 3: Levo / 11 kW / 50 mm Vreteno 4: Zgoraj / 5,5 kW / 50 mm Vreteno 5: Zgoraj / 5,5 kW / 50 mm Vreteno 6: Spodaj / 5,5 kW / 50 mm Število vreten: 6 Krmiljenje: Mobilno vreteno Podajalnik: 5,5 kW Skobeljni in profilirni avtomat Weinig Unimat 23E za štiristransko skobljanje in profiliranje lesa z utorno posteljo za kratke in ukrivljene obdelovance, ter z mobilnim vretenom in dolgo poravnalno mizo.

Stanje: zelo dobro (rabljeno), Štiristranski skobeljni stroj WEINIG Unimat 23 E maks. širina skobljanja 230 mm, višina skobljanja 130 mm, 5 vreten, Ročno nastavljanje dimenzij skobljanja, vretena: spodnja 7,5 kW; leva in desna 11 kW; zgornja 11 kW; spodnja 7,5 kW, motorji z zavorami, Lrjdpfx Adexvc Uaskei vretena premer 40 mm, vretena popolnoma nastavljiva, stroj ima 4 vlekalne valje v delovni mizi, primeren za mokri les, podajanje z gredami kardana z brezstopenjsko regulacijo, stroj se prodaja skupaj z glavami, vidnimi na vretenih, kardani niso izrabljeni, mize niso obrabljene, stroj deluje gladko, brez tresenja ali vibracij, skobeljni stroj je masiven v originalu, teža približno 5 t. Zelo dobro stanje, vse deluje.

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Delovna širina: 230 mm, delovna višina: 160 mm, število vreten: 5, premer vretena: 50 mm, moč vretena: 4x 5,5kW/2x 11kW, pomik: 24 m/min, dolžina vhodne mize: 3000 mm, aksialni hod vertikalnega vretena: 80 mm, aksialni hod horizontalnega vretena: 45 mm. Priključna moč: 126 kW, potreba po zraku: 8400-9600 m³/h, dimenzije stroja (X/Y/Z): pribl. 3500mm/2000mm/1800mm, teža: pribl. 3500 kg. Vključno z vgradno enoto Weinig EM-11 in ustreznim razdelilnikom za odsesavanje. Dokumentacija na voljo. Možen je ogled na lokaciji. Lrjdju Damdjpfx Adkei

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E ----- 6 spindles (including 2 x right), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 – 230 mm Working height: 8 – 120 mm 1st spindle (bottom), 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 125 – 180 mm Rabbetting device incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle (right), 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle (left) ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. side pressure roller, spring-loaded 4th spindle (right), 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle (top), 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circles: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool circle and can be swung away from tool, spring-loaded 6th spindle (bottom), 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles – general ----- All moulding spindles with high concentric accuracy Lubrication points for axial spindle movement Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely adjustable from 5–24 m/min Infeed roller in front of 1st lower tool, pneumatically controlled up/down Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustable feed roller travel relative to left spindle, axial 35 mm Electrical system ----- Operating voltage: 440 V (voltage range 380–420 volts), 50 Hz Machine base, tables, and fences ----- Jointing table 2.0 m long (incl. jointer guide) Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindle Nos. 3 and 5 Min. working height: 12 mm Electric height adjustment of top spindles and feed Central position of lubrication points on front of machine Electronic digital displays on spindle 3 and 5 (axial), spindle 6 (radial), spindle 4 (axial and radial) Lrsdpfx Asxz Hh Usdkoi Safety and noise protection ----- Full safety enclosure Easy high...

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna širina: 260 mm, višina skobljanja: 160 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 5.500 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 6, moč: 65 kW (88,38 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Unimat 23 E with 6 spindles, with hard coating. Working width: 260 mm Ljdpfxsvbi Rvj Adkeri Working height: 160 mm Spindle diameter: 40 mm Feed: 5.5 kW / 6 – 36 m/min Spindle configuration: 1-Bottom (11 kW) 2-Right + 3-Left (15 kW) 4-Top (11 kW) 5-Top (11 kW) 6-Bottom (11 kW) Air cushion table. Short piece package. Four powered feed rollers in the table.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 230 mm, – nemška proizvodnja – leto izdelave 2001 – skupna moč 42 kW – vlečni valji v mizi TEHNIČNI PARAMETRI: – širina skobljanja: 230 mm – višina skobljanja: 170 mm – električna nastavitev višine – premer vretena: 40 mm – 1. spodnje vreteno: 7,5 kW – 2. levo vreteno: 11 kW – 3. desno vreteno – 4. zgornje vreteno: 11 kW – 5. spodnje vreteno: 5,5 kW – kontinuirano nastavljiv pomik: 6–38 m/min – moč motorja pomika: 4 kW – dolžina vstopne mize: 1000 mm – električne zavore – 5 zgornjih jeklenih vlečnih valjev – en zgornji gumijasti vlečni valj – 2 vlečna valja v mizi: eden zobati – zračni blazinasti element v mizi – pnevmatski pritisk – pomik na kardanskih gredah Lodpfx Aew H Smhedkori – premer odsesovalnih priključkov: 5 x 140 mm – centralno mazanje mize – dimenzije stroja (d/š/v): 390 / 210 / 230 cm – teža cca 4000 kg

Stanje: dober (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 170 mm, premer vretena: 50 mm, širina skobljanja: 230 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 7.500 W, vrsta nastavitve višine: električni, premer gredi skobeljnika: 50 mm, število vreten: 8, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, 8 spindles, Working width: 230 mm, Working height: 180 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (7.5 kW) – Grooving spindle 2-Bottom (7.5 kW) 3-Right (11 kW) 4-Left (11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) Ljdpfor Axwnox Adkjri 8-Top (7.5 kW) 8 driven rollers in the table

Stanje: rabljeno, Število vreten: 10 kos. Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Vreteno 2: desno / 11 kW / 40 mm Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Lsdpfjw H Iv Tex Adkjri Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Leto izdelave: 2002, stanje: dober (rabljeno), Four-sided planer Weinig Unimat 23 EL Lredpfxshhyr As Adkji - Machine in stock - German production - Year of manufacture: 2002 - Documentation (DTR) included TECHNICAL PARAMETERS: - Planing width: 230 mm - Planing height: 170 mm - Feed speed adjustable by frequency inverter: 6–26 m/min - Spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 7.5 kW 5th bottom spindle: 7.5 kW 6th top spindle: 7.5 kW - Feed motor power: 4 kW - Feed via cardan shafts - Pneumatic pressure hold-down - Five steel top feed rollers - Four rubber top feed rollers - Electric height adjustment - Extraction port diameter: 140 mm - Centralized lubrication - Table length: 1980 mm Machine dimensions: - Length: 520 cm - Width: 210 cm - Height: 210 cm - Weight: 4000 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Four-sided planer with 8 heads. Head configuration: bottom horizontal, right vertical, left vertical, top horizontal, right vertical, bottom horizontal, top horizontal, and the last one is universal. A new frequency inverter and new cables have been installed, with stepless feed speed adjustment. The machine has undergone a complete overhaul. Weight: 4600 kg. Lodpfx Aevtpk Hedkori

Stanje: dober (rabljeno), Leto izdelave: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with individual 7.5 kW motor and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter axial stops milled to 35 mm height 3. Left spindle with individual 7.5 kW motor Speed: 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter radial pneumatic pressure guide left, for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC axis radial Pneumatic control axial, adjustment range 40 mm, glazing bead ejection, pneumatically sequenced - Feed system with 4 kW motor and feed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, workpiece monitoring, operator terminal, free-standing control cabinet, free-standing operator console, magnetic interlock for safety hood - Enhanced sound insulation - Automatic infeed and workpiece preparation system for various workpiece lengths and widths Workpiece dimensions: Length: 400–3,500 mm (up to 4,000 mm) Width: 40–200 mm Thickness: 20–100 mm Driven conveyor belt Belt width: 250 mm, conveying length: 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Fine Planer Uniplan 23 Year of manufacture: 2004 Lredpfx Aswyulujdkoi Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC axis radial - First feed roller sequenced with photo cells - NC axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight-knife heads 501 with HSS planer knives 30 mm x 3 mm, max. 9,000 rpm, dim. 163 mm x 230 mm x 50 mm, Z=4

Stanje: zelo dobro (rabljeno), working width 230 mm working height 160 mm 5 heads head arrangement: bottom/right/left/top/bottom Lrjdpfx Adeqmmfuekoi spindle diameter 40 mm (last one 50 mm) manually adjustable jointer on the last spindle table rollers electric adjustment of the pressure beam variable feed speed up to 36 m/min chromed table pneumatic pressure for feed rollers

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Ljdpfjrb An Uex Adkori Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed powered by cardan shaft Feed rollers integrated in table Pneumatic pressure elements CE certificate Year of manufacture: 2003

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 88208, delovna širina: 230 mm, višina skobljanja: 120 mm, premer vretena: 40 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna širina: 220 mm, skupna višina: 120 mm, hitrost vretena (min.): 6.000 obr/min, premer ekstrakcijske šobe: 150 mm, premer gredi skobeljnika: 40 mm, vhodni tok: 400 A, širina mize: 230 mm, premer osi rezila: 40 mm, Oprema: motorna zavora, Weinig Unimat 23 EL stroj za skobljanje in profiliranje z 9 vreteni, št.: 88210, letnik 1998 V dobrem stanju, z varnostnim ohišjem in akustično/zvočno varnostno kabino. Vretena: HP, B11, R11, L11, R11, L11, T11, B22 (glava za krožno žago), T11, B11, vsi v kW. 2 m dovajalna miza. Pnevmatski pritisk na podajalne valje. Črpalka za vosek. Podajalna hitrost od 6 do 36 m/min. Ledpfxsx Elagj Adkori Nekatere glave za skobljanje so že na stroju. S polno dokumentacijo. Možen ogled na lokaciji: The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG. Fotografije na voljo prek WhatsApp.

Stanje: rabljeno, Leto izdelave: 1998, skupna širina: 2.220 mm, skupna višina: 1.900 mm, Dimensions (L x W x H): 450 x 222 x 190 cm Price: On request - Year of manufacture: 1998 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 83929 - Number of spindles [pcs.]: 5 - Spindle 1: - Spindle type: Horizontal spindle - Motor power [kW]: 7.5 - Spindle 2: - Spindle type: Vertical spindle - Spindle 3: - Spindle type: Vertical spindle - Motor power [kW]: 11 - Spindle 4: - Spindle type: Horizontal spindle - Motor power [kW]: 11 Lrjdpfx Aoxr U Nuodkoi - Spindle 5: - Spindle type: Horizontal spindle - Motor power [kW]: 7.5 - Transport dimensions: 4500 mm x 2220 mm x 1900 mm (L x W x H) - Transport packages [pcs.]: 1 Financial Information VAT: The stated price is net plus VAT VAT/refund scheme: VAT deductible for business customers Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: rabljeno, Tehnični podatki: Maksimalna širina skobljanja: 240 mm Maksimalna višina skobljanja: 130 mm Premer vretena: 40 mm Število vreten: 6 Zaporedje vreten: spodaj 5,5 kW desno/levo 7,5 kW gore 5,5 kW gore 5,5 kW spodaj 5,5 kW univerzalno 5,5 kW Lredpfx Adsycu R Ioksi 1/4/5/6 vreten ima svoj motor 2/3 na enem motorju Rebraste mize Rebrasti valji v mizi: 2 Zgornji jekleni vlečni valji: 5 Zgornji gumijasti vlečni valji: 3 Premer odsesovalnega nastavka: 6 x 140 mm Stopenjska nastavitev podajanja Podajanje preko kardanske gredi Mazalna črpalka za delovno mizo 2 gladka valja v mizi Tlak: 6 atm. Električni dvig korpusa Napajanje: 400 V Skupna moč: 32 kW Skupne mere: Dolžina: 4600 mm Širina: 2000 mm Višina: 1800 mm

Stanje: dober (rabljeno), WEINIG UNIMAT 23EL 9 VRETEN KRATKA VLOŽNA MIZA 1: SPODAJ 7,5KW 2: DESNO 11 KW 3: LEVO 7,5 KW 4: DESNO 7,5 KW 5: ZGORAJ 11 KW 6: SPODAJ 7,5 KW 7: ZGORAJ 11 KW 8: SPODAJ 11 KW 9: UNIVERZALNO 7,5 KW, NAGIBNO 360° VRETENA 8000 OBR/MIN POGONSKI MOTOR 7,5 KW MAKS. PODAJALNA HITROST 44M/MIN 13 x POGONSKIH ZGORNJIH PODAJALNIH VALJEV 6 x POGONSKIH TALNIH VALJEV AVTOMATSKO MAZANJE MIZE PNEVMATSKI BOČNI PRITISNI VALJI PNEVMATSKI PRITISK NA 6+8 Lodsyrra Eopfx Adksri DIMENZIJE: PRIB. 5000 X 2000 X 1800 MM TEŽA: PRIB. 6500 KG SESALNE KAPE: 9 x 140 MM PREMERA ODSESOVALNI RAZVODNIK VKLJUČEN CELOTNA DOKUMENTACIJA VKLJUČENA

Leto izdelave: 1997, stanje: zelo dobro (rabljeno), maximum workpiece width 23 cm maximum workpiece height 18 cm 1 lower horizontal spindle 2 right vertical spindle Lrsdpek Dxraefx Adkoi 3 left vertical spindle 4 upper horizontal spindle adjustable heads up/down, right/left spindle diameter 40 mm hydraulic side feed on infeed table

Stanje: dober (rabljeno), WEINIG UNIMAT 23EL 9 VRETEN Lsdpfjyahubox Adkeri KRATKA DOVODNA MIZA 1: SPODAJ 7,5 kW 2: DESNO 11 kW 3: LEVO 7,5 kW 4: DESNO 7,5 kW 5: ZGORAJ 11 kW 6: SPODAJ 7,5 kW 7: ZGORAJ 11 kW 8: SPODAJ 11 kW 9: UNIVERZALNO 7,5 kW, NAGIBNO 360° VRETENA 8000 O/MIN POGONSKI MOTOR 7,5 kW MAX HITROST PODAJE 44 M/MIN 13 x GNANIH ZGORNJIH PODAJALNIH VALJEV 6 x GNANIH LEŽAJNIH PODAJALNIH VALJEV AVTOMATSKO MAZANJE LEŽAJA PNEVMATSKO GNANI STRANSKI PRITISNI VALJI PNEVMATSKO GNANO ZADRŽEVANJE NA 6+8 DIMENZIJE: cca 5000 x 2000 x 1800 MM TEŽA: cca 6500 KG ODSESOVALNI POKROV: 9 x 140 MM PREMER ODSESOVALNI RAZDELILNIK VKLJUČEN POLNA DOKUMENTACIJA PRILOŽENA

Leto izdelave: 1997, stanje: zelo dobro (rabljeno), I am selling the complete window manufacturing profiling line: 1 pc. 5-spindle four-sided planer with saw, Weinig Unimat 23EL - without HESS sanding machine – alternative replacement machine negotiable 2 pcs. tenoning and slotting machines, Weinig Unitec 10 2 pcs. profiling and rebate automation centers, Weinig Univar 10 1 pc. CNC dowel drilling machine, KOCH WinDoor - Set of complete Weinig automation infeed and conveyors Year of manufacture: 1997. Milling heads: OERTLI. Available immediately. Already dismantled and placed on original pallets. Condition: very good! Lrjdpfofzzidsx Adkji