Formier

Weinig AG Unimat 23 8 heads

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed powered by cardan shaft Bedpsrb An Uefx Aiqsln Feed rollers integrated in table Pneumatic pressure elements CE certificate Year of manufacture: 2003

Stanje: dober (rabljeno), globina vrtanja: 1.500 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1.500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Blsdpfx Aisv A Uw Deqon Control: SIEMENS 840D Year of manufacture: 2007 Drilling, milling, and tapping machine for heat exchanger bases and plates Swiveling A-axis: +25° to -15° Filtration and coolant system: 1,000 L Chip conveyor: 2,000 x 1,200 mm – output height Milling tool changer, tower station, 20 positions ELB drilling capacity: 3 – 35 mm Milling capacity: 250 cc/min Feed rates on all axes (X-Y-W-Z): 15,000 mm/min Approx. 15,000 spindle hours Comes with a large tooling package Specifications Metric / US Standard Max. drill diameter (steel): 40 mm Drilling depth: 1,500 mm X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,500 mm W-axis travel: 750 mm Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle taper: HSK 63 Mk Spindle power: 11 kW Spindle speed: 8,000 rpm Dimensions (approx.): Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: rabljeno, Weinig Unimat 23 Bsdpfxjncc Igo Aiqeln Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on a pedestal u- re-li-o-u.o Without feed unit machine only The machine is dismantled and immediately available Transport can be arranged

Stanje: pripravljen za uporabo (rabljen), Število vreten: 6 kos. Delovna širina: 230 mm Višina stroja: 120 mm Dolžina strojne mize: 2000 mm Motor za podajanje: 4 kW Hitrost podajanja: 5–24 m/min. WEINIG strojna miza in avtomat za utore Unimat 23 E ----- 6 vreten (od tega 2 na desni strani), močnejši motorji, 8.000 vrt/min, nadzor ATS Stroj se pred dostavo očisti in preveri glede delovanja. Delovna širina: 20–230 mm Višina obdelovanca: 8–120 mm 1. Vreteno spodaj: 5,5 kW (motor je bil obnovljen) ----- Premer: 40 mm Število vrtljajev: 6.000 vrt/min Krog obdelave orodja: 125–180 mm Naprava za utore, vključno z orodjem Vložek mize, kaljen pred 1. spodnjim vreténom 2. Vreteno desno: 12,1 kW (motor je bil obnovljen) ----- Skupni motor z levo vertikalno vreteno Premer: 40 mm Število vrtljajev: 8.000 vrt/min Krog obdelave orodja: 112–250 mm Maks. premer orodja za oporo: 203 mm Maks. globina utora: 35 mm Nastavitvena pot, aksialna: 80 mm 3. Vreteno levo ----- Skupni motor z 2. vretenom Premer: 40 mm Število vrtljajev: 8.000 vrt/min Krog obdelave orodja: 112–200 mm Maks. globina utora: 35 mm Nastavitvena pot, aksialna: 80 mm Pritiskalnik pred levim vretenom, vključno z stranskim valjčnim pritiskom, vzmeten 4. Vreteno desno: 8,3 kW (motor je bil obnovljen) ----- Premer: 40 mm Število vrtljajev: 8.000 vrt/min Krog obdelave orodja: 112–250 mm Maks. premer orodja za oporo: 203 mm Maks. globina utora: 35 mm Nastavitvena pot, aksialna: 80 mm 5. Vreteno zgoraj: 7,5 kW ----- Premer: 40 mm Število vrtljajev: 8.000 vrt/min Krogi obdelave orodja: 112–200 mm Maks. globina utora: 35 mm Nastavitvena pot, aksialna: 45 mm Razdeljen pritiskalnik pred zgornjim vretenom, nastavljiv na krog obdelave orodja in odmakljiv od orodja, vzmeten. 6. Vreteno spodaj: 4,0 kW ----- Premer: 40 mm Število vrtljajev: 6000 vrt/min Krog obdelave orodja: 112–250 mm Maks. globina utora: 15 mm Nastavitvena pot, aksialna: 45 mm Vretena, splošno ----- Vsa vretena za utore imajo visoko natančnost pri obhodnosti. Mesta za mazanje za aksialno premikanje vretena. Podajalni sistem ----- Motor z mehansko zavoro, 4 kW Mehanski podajalnik, brezstopenjsko nastavljiv: 5–24 m/min. Podajalni valj pred 1. spodnjim orodjem pnevmatsko nastavljiv navzgor in navzdol, valji Durofer z ostro nazobčenostjo (patent Weinig) z omejitvijo globine in samoočistilni Nastavitvena pot podajalnih valjev glede na levo vreteno, aksialna: 35 mm Elektrika stroja ----- Napetost: 440 V (območje napetosti: 380–420 voltov), 50 Hz. Podstavek stroja, mize in opore ----- Strojna miza dolga 2,0 m (vključno s tirnico) Ročna črpalka za vnos voska na mize Eno gnano gumijasto valjčno kolo (v izhodni mizi, vzmeteno) Dva gnjena valjčna kolesa v strojni mizi, kaljena Upravljanje stroja ----- Pritiskalnik pred zgornjim vretenom z mehanskim digitalnim prikazovalnikom. Odvod po zgornjem vretenu z mehanskim digitalnim prikazovalnikom. ATS/sistem, avtomatsko pozicioniranje po 2 oseh Bodpfxjxz Hh Uj Aiqeln za vreteno št. 3 in 5 Min. delovna višina: 12 mm Električna nastavitev višine zgornjih vreten in podajanja Osrednja lega mest za mazanje na sprednji strani stroja Elektronski digitalni prikazovalniki na vretenu št. 3 in 5, aksialno, vreteno št. 6, radialno, vreteno št. 4, aksialno in radialno Varnost in zvočna zaščita ----- Varna, popolna zaščita Enostavno dvigovanje...

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Working table: 2500 x 1500 mm Working speed: 12 mm/s Bedped Aca Aofx Aiqsln Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Unimat 23 Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: Bottom: 5.5 kW Right Left: 7.5 kW Top: 11 kW Bottom: 5.5 kW Pneumatic material hold-downs divided into 4 sections Blsdpfx Aetxxwdsiqsn Feed speed adjustable by variator: 4–24 m/min Infeed table length: 1980 mm Drive via cardan shafts Heavy soundproof cabin Machine dimensions: 380 x 226 x 178 cm (H) CE certificate

Stanje: zelo dobro (rabljeno), Overall dimensions: Length: 4500 mm Width: 1900 mm Height: 1750 mm Infeed table height: 860 mm Weight: 1100 kg Workpiece dimensions: Height: 280 mm Width: 300 mm Length: from 500 to 3000 mm Power supply: 400 V (3-phase) Feeder feed: Stepless, inverter-controlled Speed: 4–13 m/min Main conveyor belt width: 200 mm Pulley diameter: 600 mm Bandsaw blade parameters: Bjdpfsugp Rnox Aiqeln Length: 4000 mm Width: 30 to 42 mm Thickness: up to 1.1 mm Material hold-down: spring-loaded Cutting thickness adjustment: manual Output per hour: up to 3 m³

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Sušilnica za les s 3 komorami (popolnoma funkcionalna, rabljena) Parametri: Blsdpfszg Iw Iox Aiqon Dolžina: 12,9 m Širina: 8,8 m Skupna višina: 5,2 m / Uporabna višina: 4,1 m Vroča voda: 90 °C Dodatne tehnične podrobnosti so na voljo na zahtevo. Možen je ogled na lokaciji ter preizkus delovanja.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 8.000 h, Four-side planer Weinig Model: Powermat 400 LE – machine with grooved table Year of manufacture: 2008 Operating hours: 8,000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles with Powerlock system Spindle configuration: - bottom: 5.5 kW - left and right: 7.5 kW each - top: 7.5 kW - bottom: 7.5 kW Spindle rotation speed: 6,000 rpm Bodpfx Aiewybrnsqoln Feed speed steplessly adjustable via inverter: 5 to 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, supplied complete with cutter heads.

Stanje: dober (rabljeno), WEINIG UNIMAT 23EL 9 VRETEN KRATKA DOVODNA MIZA 1: SPODAJ 7,5 kW 2: DESNO 11 kW 3: LEVO 7,5 kW 4: DESNO 7,5 kW 5: ZGORAJ 11 kW 6: SPODAJ 7,5 kW 7: ZGORAJ 11 kW Bljdpfx Aisyahubeqsn 8: SPODAJ 11 kW 9: UNIVERZALNO 7,5 kW, NAGIBNO 360° VRETENA 8000 O/MIN POGONSKI MOTOR 7,5 kW MAX HITROST PODAJE 44 M/MIN 13 x GNANIH ZGORNJIH PODAJALNIH VALJEV 6 x GNANIH LEŽAJNIH PODAJALNIH VALJEV AVTOMATSKO MAZANJE LEŽAJA PNEVMATSKO GNANI STRANSKI PRITISNI VALJI PNEVMATSKO GNANO ZADRŽEVANJE NA 6+8 DIMENZIJE: cca 5000 x 2000 x 1800 MM TEŽA: cca 6500 KG ODSESOVALNI POKROV: 9 x 140 MM PREMER ODSESOVALNI RAZDELILNIK VKLJUČEN POLNA DOKUMENTACIJA PRILOŽENA