Okenski sistem
WEINIG Unicontrol 12 NC

Name: WEINIG Unicontrol 12 NC
Brand: WEINIG
Availability: InStock

Stanje

Rabljeno

Lokacija

Oberkochen Nemčija

Prikaži karto

Podatki o stroju

Oznaka stroja:: Okenski sistem

Proizvajalec:: WEINIG

Model:: Unicontrol 12 NC

Stanje:: rabljeno

Cena in lokacija

Lokacija:: Oberkochen

Pokliči

Podrobnosti ponudbe

ID oglasa:: A20764987

Referenčna številka:: 1305-2728

Posodobitev:: nazadnje dne 15.12.2025

Opis

Slot spindle 2 pcs.
Number of milling units: 7 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
Weinig Unicontrol 12
with radial and axial NC spindles, VARIO table, and trimming carriage
.....
Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen.
Video and photos were taken before dismantling.

Technical data summary
(additional accessories possibly included, please inquire)
.....

Crosscut saw
.....
> Electronic crosscut saw, horizontally infinitely adjustable
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
> Motor power: 3.7 kW
> Laser alignment light for identifying saw cuts
> Axial adjustment range: 150 mm NC axis, electronically infinitely adjustable
> Radial adjustment range: pneumatically controlled, 8 positions for e.g., edge rounding from above

Rounding unit
.....
> Position: horizontal bottom
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
> Tool clamping length: 25 mm
> Spindle speed: 9,000 rpm
> Max. tool diameter: 130 mm
> Axial adjustment mechanically linked with crosscut saw.
> Radial adjustment: pneumatically operated on/off

Electronic length stop
.....
> Length: 4,500 mm

1st Tenoning and slotting spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment: 580 mm NC axis, infinitely adjustable
> Spindle speed: 2,800 rpm
> Max. tool diameter: 400 mm
> Counter-support: the entire clamping length is counter-supported

2nd Tenoning and slotting spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment: 580 mm NC axis, infinitely adjustable
> Spindle speed: 2,800 rpm
> Max. tool diameter: 400 mm
> Counter-support: the entire clamping length is counter-supported

Transfer belt
.....
For transferring parts to the longitudinal machining section, including
part separation for doubles infeed to the longitudinal machining.

1st Profiling spindle (climb and counter rotation)
Isdpfx Adjx H Al Nekeap
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment: 350 mm NC axis, infinitely adjustable
> Radial adjustment: 80 mm NC axis, infinitely adjustable
> Spindle speed: 6,000 rpm
> Min. tool cutting circle: 140 mm
> Max. tool cutting circle: 232 mm
> 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions
> Table plate pneumatically controlled according to tool diameter

2nd Profiling spindle
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment: 350 mm NC axis, infinitely adjustable
> Radial adjustment: 80 mm NC axis, infinitely adjustable
> Spindle speed: 6,000 rpm
...

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2002

128 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 7364 ... oglasi

+49 7361 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Oberkochen

470 km

Okenski sistem
WEINIGUnicontrol 12 NC

Pokliči

Stanje: rabljeno, Leto izdelave: 2004, Slotting spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm CNC control, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial NC spindles as well as VARIO table ..... Machine is already professionally dismantled and stored in 73447 Oberkochen Technical Data Summary (for any additionally included accessories, please inquire) ..... Cross-cut saw ..... > Cross-cut saw electronic, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide for cut recognition > Axial adjustment range 150 mm NC axis, electronically stepless > Radial adjustment range pneumatically adjustable in 8 positions e.g. for edge rounding from above Rounding unit ..... > Position: horizontal below > Axial adjustment range together with cross-cut saw. Electronic length stop ..... > Length: 4500 mm 1. Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400 mm > Outfeed counter, full clamping length countered 2. Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400 mm > Outfeed counter, full clamping length countered Transfer conveyor ..... For transferring parts to the longitudinal processing, including Double part separation before entry into longitudinal processing. 1. Profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool diameter min.: 140 mm > Tool diameter max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool diameter min.: 140 mm > Tool diameter max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontal above > Motor power: 3.0 kW > Spindle diameter: 40 mm Iasdpfx Aeyrtzkodkjp > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless

Poglej podrobnosti

Mali oglas

Gerolzhofen

542 km

Stavbni sistemi
KrüsiCMI 40

Pokliči

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Iasdovwfqqjpfx Adkep Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty

Poglej podrobnosti

Mali oglas

Krožna žaga za lahke kovine / aluminij MTI AS-800

Cochem-Brauheck

732 km

Krožna žaga za lahke kovine / aluminij
MTIAS-800

Pokliči

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Iodpfx Aed Szf Njdkeap Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Poglej podrobnosti

Mali oglas

Nattheim

457 km

Namizni rezkar
KölleF 45

Pokliči

Stanje: rabljeno, Leto izdelave: 1981, Velikost mize: 1200 x 1000 mm, višina mize: 850 mm, obseg nagiba: -5° do +45°, hitrosti rezkanja: 3000/4000/5000/6000/8000/10000 obr/min. Nastavitev višine: 120 mm, vpenjalo orodja: MK5, vključno z integralnim paralelnikom. Teža: cca. 1000 kg. Lokacija skladišča: Nattheim. Iedsx It Auopfx Adkjap

Poglej podrobnosti

Mali oglas

Herning

1.187 km

OKNA
SCM GROUPWINDOR 60

15.000 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min Iaodpjt R T Hcofx Adksp - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Poglej podrobnosti

Mali oglas

Trakasti transporterji Forderband Transportband Conveyor Conveyor

Mleczków

735 km

Trakasti transporterji
Forderband Transportband ConveyorConveyor

1.950 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Varilna enota FRONIUS MIG MAG TPS 3200 4000 5000 ALU STAHL V2A SCHWEISSGERÄT

Wien

245 km

Varilna enota
FRONIUS MIG MAG TPS 3200 4000 5000ALU STAHL V2A SCHWEISSGERÄT

3.690 €

Fiksna cena plus DDV

Pokliči

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost Iodpfjwbil Sex Adkjap E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Poglej podrobnosti

Mali oglas

Brusilnik s širokim pasom Bütfering OPTIMAT SBC 313 QCE

Gescher

869 km

Brusilnik s širokim pasom
BütferingOPTIMAT SBC 313 QCE

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2002, obratovalne ure: 5.900 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 74343, delovna širina: 1.350 mm, dolžina brusnega traku: 2.620 mm, širina brusilnega traku: 1.370 mm, Širokopasovni brusilni stroj Bütfering Optimat SBC 313 Letnik izdelave: 2002 Model: Optimat SBC 313/QCE/Classic - s 3 agregati (podrobnosti na priloženi sliki) - brušenje od zgoraj Delovna širina: 1350 mm Širina brusnega traku: 1370 mm Dolžina brusnega traku: 2620 mm Širina prečnega brusnega traku: 150 mm Dolžina prečnega brusnega traku: 4700 mm Iedpfxoqvl D He Adkoap Natančnejše informacije so na fotografijah.

Poglej podrobnosti

Mali oglas

Sistem za lakiranje oken FINITURE Pro Flow Impraegnieranlage

Aalen

471 km

Sistem za lakiranje oken
FINITUREPro Flow Impraegnieranlage

Pokliči

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Four independent chambers for entry, flooding, air-blow, and exit. Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Iaodpfonl Nqqjx Adkop Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Poglej podrobnosti

Mali oglas

Nemčija

650 km

Drobilnik z eno gredjo
GrossGAZ 62

Pokliči

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), A shredder manufactured by Gross Apparatebau GmbH, previously used in the wood industry, is available. Feed opening (X/Y): 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm–40mm, extraction nozzle diameter: 160mm, machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation is available. On-site inspection possible. Iaedpfju Nlkxsx Adkjp

Poglej podrobnosti

Oglašujte tukaj