Stanje: rabljeno, Leto izdelave: 1986, Workpiece diameter 460 mm Thread length 900 mm Thread pitch 100 mm Total power requirement 10 kW Machine weight approx. 8 t Space requirement approx. m R E I S H A U E R (Switzerland) Universal - extra large - thread and worm grinding machine Model ULG 46 Year 1986 _____ ___ Grinding length: 900 mm Maximum workpiece clamping length: 1,190 / 1,400 mm Workpiece Ø / thread Ø, min./max.: 10 – 460 mm (!) Longitudinal adjustment of workhead on table: 210 mm Maximum workpiece weight approx.: 100 kg Work spindle bore approx.: 65 mm Lead range for single-rib wheels: 0.3 – 100 mm Maximum module: 10 Maximum lead angle: +/- 40° Grinding wheel dimensions, Ø x width: 350 x 20/40 mm Relief grinding size: 0.03 – 8 mm Presettable number of flutes: 2 – 10, 12, 14, and 16 27 workpiece speeds: 0.4 – 160 rpm Infinitely variable grinding wheel speeds: 72 – 2,500 rpm Spindle drive approx. 10 kW * Total connected load approx. 25 kW - 400 V - 50 Hz Weight approx. 8,000 kg Ksdpfx Adot H Smtokjlp Accessories / Special Features: • Machine was originally built with an increased center height for a maximum workpiece swing of 460 mm, allowing thread machining on larger workpieces and housings (aircraft industry)! • Internal thread grinding device with two dressing devices (long and short spindles) • Various flanges with grinding wheels • USL 3200 dressing device for pressure roll profiling, mounted above the grinding wheel (not motorized) • USL 700 dressing device for manual profiling of single-ribbed grinding wheel flanks • Automatic plunge-cut device. Automatic lift-off of grinding slide for the return of the workpiece slide • Relief grinding device with several cams, also suitable for plunge grinding • Hydraulic tailstock with foot switch and expansion compensation • Two simple dressing devices, manually operated for straight profiling • Two 3-point steadies for heavy workpiece support • Various flanges, set of change gears, numerous coolant nozzles, setting gauge, 3 faceplates up to 500 mm diameter, separate electrical cabinet for adjusting various grinding cycles • Lift-off safety hood above the working area, monitored by limit switches, etc. No coolant device available, but connection to a central coolant supply with valve control as well as a separate coolant chiller and standalone dust extraction unit.

Leto izdelave: 1985, stanje: rabljeno, Workpiece diameter: 50 mm Thread length: 100 mm Thread pitch: mm Total power requirement: 1 kW Machine weight approx.: 1,500 kg Space requirements approx.: m MONNIER & ZAHNER Switzerland Horizontal thread and worm milling machine with workpiece loading device Type: 256 Year of manufacture: approx. 1985 # 1349 _____ Max. workpiece diameter: 1.5 – 50 mm Max. workpiece length: 100 mm Axial milling length: 100 mm Module in steel: 1 Minimum worm starts: 1 Min./max. center distance tool-workpiece: 0 – 70 mm Milling slide swiveling: +/- 30° Cutter size (Ø x length): 70 x 16 mm Cutter speeds approx.: 1,000 rpm Feed range, steplessly adjustable: 0 – 6 m/min Klsdpfxot Hwn Ne Adkjp Spindle drive: approx. 0.6 kW Total drive: approx. 1 kW - 220 V/380 V / 50 Hz Weight: approx. 1,500 kg Accessories / special equipment: • Simple machine for manufacturing (medical) screws or worm gearing onto shaft-shaped workpieces • LANDIS & GYR program control PCA • Fold-out workpiece magazine, incomplete • Pneumatic tailstock slide, or steady rest support, approx. 100 mm stroke • Approx. 20 collets for workpiece clamping • Various change gears for generating thread pitches • Workpiece counter Condition: Good – ready for demonstration, under power Delivery: ex stock – as inspected Payment: strictly net – after order confirmation We have approx. 100 further gear machines in stock and welcome your inquiry.

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Klsdpfst Hw N Tex Adkep Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Leto izdelave: 1985, stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. Klodpfstzdyzox Adkep • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: rabljeno, Leto izdelave: 1985, Thread diameter 254 mm Grinding length 350 mm Thread pitch 51 mm Control SIEMENS S 8 Total power requirement 12 kW Machine weight approx. 5000 kg Kljdot Hw U Aopfx Adkjp Space requirement approx. m Internal thread grinding machine with PLC control

Stanje: dober (rabljeno), Thread cutter, thread cutting machine, tapping machine - Manufacturer: Fein, tapping machine type ASg 636 - Rated power input: 280 W - Max. threading capacity: M8 - Speed: 450 rpm - Connection: 220 V - Quantity: 2 tapping machines available Kjdpfx Asb A N Ibedkslp - Price: per unit - Dimensions: 330/150/H80 mm - Weight: 2.3 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s Strehler čeljustmi, navojno orodje, stroj za rezanje navojev, rezalnik navojev za cevi Kjdpfxob A N I Ns Adkelp -Navoj v colah: 1/2"-2" cola -Teža: 15 kg

Stanje: dober (rabljeno), Thread cutter, thread cutting machine, tapping machine - Integrated reversing gearbox: with quick reverse - Rated power input: 230 watts - Maximum thread cutting capacity: M6 - Connection: 230 volts - Weight: 2.5 kg Ksdpfx Asb A N Ikodkjlp

Stanje: dober (rabljeno), Thread cutting head with steel dies, thread cutting stock Klsdpfx Adsb A N U Rokop - Inch threads: 1/2"–3/4"–1" inch - Weight: 5 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, klešče za rezanje navojev, stroj za rezanje navojev, stroj za rezanje cevičnih navojev Klsdpfxeb A Racs Adksp -Palčni navoj: 1/4"–1 1/2" cola -Teža: 14,5 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, orodje za rezanje navojev, stroj za rezanje navojev, rezalnik cevnih navojev – Palčni navoj: 1/2"-3/4" Kjdpfx Aeb A Rabjdkolp – Teža: 4,5 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s Strehler čeljustmi, rezalna klešča za navoje, stroj za rezanje navojev, rezanje cevnih navojev Klodjb A Rdijpfx Adksp -Rezervne čeljusti: 4 -Palčni navoj: 1/2"-2" col -Transportni zaboj -Teža: 16 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, napravnik za rezanje navojev, stroj za rezanje navojev, rezalnik navojev za cevi Kljdpfx Asb A Rltodksp - Čeljusti za colske navoje: 1"-2" col - Teža: 12 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s nastavki, rezalna klupa za navoje, stroj za rezanje navojev, rezalnik cevastih navojev - Čeljusti za colske navoje: 1/4" - 1 1/2" cola Kedpeb A Rlrsfx Adkslp - Teža: 8 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, navojni rezalnik, stroj za rezanje navojev, orodje za rezanje cevastih navojev -Colski navoji: 1" - 2" col -Transportni kovček Klodpfx Adob A Nixekop -Teža: 17 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s Strehler čeljustmi, rezalna klupa za navoje, stroj za rezanje navojev, rezalnik navojev za cevi - Colski navoji: 3/8" - 1" - V transportnem kovčku - Teža: 5 kg Kledpjb A Rlvsfx Adkjp

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, orodje za rezanje navojev, stroj za rezanje navojev, rezalnik cevi Klodpfx Adeb A Rluskep -Colni navoj: 1/2"-3/4" cola -Teža: 6 kg

Stanje: dober (rabljeno), Thread cutting machine, pipe threader Kledpfx Asb A Iwcsdkop - For: pipe size up to 2 inches - Threading dies: 2" - Drive: via 3-speed gearbox - Dimensions: 550 x 360 x H240 mm - Weight: 55 kg

Stanje: dober (rabljeno), Thread Cutting Machine, Pipe Thread Cutter Kljdjb A Rzwjpfx Adkep - For pipe sizes up to 2" - Threading dies: 1" - Drive: via 3-speed gearbox - Dimensions: 550 x 360 x H240 mm - Weight: 60 kg

Stanje: dober (rabljeno), Hagen & Goebel HC 22 E / Stroj za rezanje navojev -Območje vrtljajev: 56 - 355 obr/min -Dimenzije mize: 600x500 mm -Leto izdelave: 1988 Kodex Edbmopfx Adkslp Dimenzije: D x Š x V 1,1 x 0,7 x 2 metra / Teža 900 kg Pridržujemo si pravico do napak in vnosnih napak.

Stanje: novo, minimalni premer metričnega navoja: 3 mm, največji premer metrickega navoja: 24 mm, Model RE16 to M16, Model RE24 to M24 · Ball-bearing, wear-free parallel arm with a radius of 1270 or 1800 mm · Connection: 230V / 1Ph · Infinitely variable speed adjustment Kljdpfx Aderb Akmskjp · Digital speed display · Digital depth control with memory for 5 programs · Quick-change holder according to DIN standard Options: Micro-spray system for model 1800 Cast iron table Wheels for cast iron table Multi-function head for cutting at any angle

Stanje: dober (rabljeno), Thread cutting head with chaser jaws, pipe threader die head, threading machine, pipe thread cutter, die head, bolt cutting head Kedpfx Ajix Rcdedkslp - Manufacturer: Ridgid, Thread cutting head model 811A, 1/8 to 2 inch - Pipe size: 1/8 to 2" - Bolt size: 1/4 to 2" - Dimensions: 260 x 240 x H70 mm - Weight: 5.6 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, navojni rezalnik, stroj za rezanje navojev, rezalnik navojev za cevi Ksdpfx Ajb A Rfijdkolp -Colski navoj: 1"-2" -Teža: 6,5 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s Strehler čeljustmi, navojna kljuka, stroj za rezanje navojev, rezalnik navojev za cevi -Colski navoj: 1/2" - 2" -Pakiranje: po dogovoru -Teža: 15 kg Kledpfx Adeb A N Uqekjp

Stanje: dober (rabljeno), Glava za rezanje navojev s Strehler čeljustmi, navojno orodje, stroj za rezanje navojev, rezalnik navojev za cevi -Palčni navoj: 1"-2" palca -Teža: 1,5 kg Kjdpfx Aeb A Raasdkjlp