Stanje: dober (rabljeno), 01) BILZ, WFLK – 115 / A 79, SK 40 7 pcs. quick-change adapters with safety slip clutch 02) BILZ, type WFLK 225, A 82/30 8 pcs.: quick-change adapters with safety slip clutch 03) NIKKEN, BT 50 – Z12 - 130 5 pcs.: quick-change adapters with safety slip clutch Godpow Dqfxsfx Ah Djuh

Stanje: dober (rabljeno), Hagen & Göbel HC 22E – Thread Cutting Machine Gedpfx Aewqz Dfeh Deuh – Speed range: 56–355 rpm – Table dimensions: 600 x 500 mm – Year of manufacture: 1988 Dimensions: L x W x H: 1.1 x 0.7 x 2 meters / Weight: 1000 kg Subject to errors and input mistakes.

Stanje: pripravljen za uporabo (rabljen), Stroj za navoj Ridgid 1224, rezalnik navojev, rabljeni stroj Splošne dimenzije: Dolžina: 1140 mm Širina: 720 mm Višina: 1110 mm Zmogljivosti: Rezanje navojev na cevi: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) z dodatkom za navijanje z zobniškim prenosom 161. Rezanje navojev na vijakih: 1⁄4″ – 2″ (6 – 52 mm). Lastnosti: Navijanje navojev na cevi 1⁄4″ – 2″ pri 36 obr/min in na cevi 2½″ – 4″ pri 12 obr/min. Model 1224 je primeren za navoj različnih vrst cevi, vključno s črnimi, pocinkanimi, s plastično prevleko, kot tudi nerjavne cevi, IMC cevi ter cevi in palice z debelo steno do 30 Rockwell C trdote. Indukcijski motor zagotavlja, da raven hrupa ostaja v zakonsko dovoljenih mejah. Posebni motor s zagonom na kondenzator/kondenzatorskim delovanjem omogoča poln obseg navijanja tudi pri padcu napetosti. Uporablja univerzalno glavo za navoje 1⁄4″ – 2″ in nastavljivo glavo 2½″ – 4″ za rezanje stožčastih ali ravnih NPT/NPSM ali BSPT/BSPP navojev. Stalno in pravilno mazanje nožev in obdelovancev preko mazanja skozi glavo. Tehnične specifikacije: Motor: 1,1 kW, enofazni, 50 Hz, indukcijski tip. Stikala: robustno rotacijsko stikalo za vzvratno vožnjo / izklop / naprej in vgražena stopalka. Hitrost vretena: 36/12 obr/min. Gedpfx Ajwwgvysh Dsuh Menjalnik: dvostopenjski prenos z razmerjem 3:1. Vpenjalna glava: kladivna izvedba z zamenljivimi vložki. Zadnja centrirna naprava: izvedba z ekscentričnim odmičnikom. Rezalnik za cevi: model 764, popolnoma samonastavljiv in samozcentrirajoč, z rezilom F-229 za cevi od 1⁄4″ do 4″. Razširjevalec (rahljalnik): model 744, z rezili, 1⁄4″ – 4″. Mazanje: skozi glavo za navoje. Črpalka: samozasenčna, zobniška, samodejno reverzirajoča, s konstantnim pretokom.

Stanje: rabljeno, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer: PEE-WEE Type: P 24 Q Serial No. LC2403099 Year of manufacture: 2004 Rolling force: max. 24 tons Tool diameter: max. 200 mm Rolling spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Holder length, tool length: max. 180 mm Workpiece diameter: max. 50 mm Rolling spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic motor power: approx. 3 kW Gujdoh A S Htspfx Ah Deh Roll drive motor power: 5.5 kW Power supply: 400 Volts, 50 Hz - Swiveling rolling spindle for through-feed thread rolling - Rolling spindle speed adjustable in 4 stages via gear shift - Hydraulic system integrated in machine bed Space requirements (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge rolling: Thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece to its nominal diameter. The maximum thread length is equal to the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools consist of three sections: lead-in, calibrating area, and run-out. Groove rolls have no pitch and are swiveled by the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle equals the pitch angle in the workpiece.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, ORT RP30 MS 2 Rollers 30 Ton Thread Rolling, Knurling, Small Gears Year of manufacture: 2009 Electronics overhaul and retrofit with Siemens PLC (2025) The machine is powered and available for inspection at our warehouse in Gussago (BS). Test run is possible. M i m u Machine Tools Rolling is a mechanical process without material removal, which can be performed cold or hot, aimed at improving surface finish (thus enhancing fatigue strength). Godpfsuykz Dox Ah Douh Capacity (tonnes): 30 Number of rolls: 2

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina navoja: 12.000 mm, skupna masa: 5.000 kg, premer obdelovanca (maks.): 90 mm, premer vretena: 80 mm, vrsta vhodnega toka: trifazni, premer valja: 250 mm, največja hitrost vretena: 50 obr/min, hitrost vretena (min.): 20 obr/min, skupna višina: 2.000 mm, skupna dolžina: 2.400 mm, skupna širina: 2.000 mm, 60-tonska hidravlična stroj za valjanje navojev s vrtljivimi vreteni za vnavaljanje in skozivaljanje Gsdpfx Ajv Rb Apjh Dsuh Prenesite datoteko PDF za fotografije

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, minimalni premer metričnega navoja: 3 mm, največji premer metrickega navoja: 12 mm, delovno območje: 1.900 mm, skupna masa: 13 kg, največja hitrost vrtenja: 400 obr/min, vrtilni moment: 28 Nm, Gewindedurchmesser: M3 - M12 Drehzahl: 400 U/min. Drehmoment: 28 Nm Luftdruck: 6 - 8 bar Arbeitsbereich: 150 - 1900 mm Maschinengewicht ca. 13 kg Baujahr: 2020 Die pneumatisch angetriebene Gewindebohrmaschine DUMETA D-JSC-12A ist für das Gewindeschneiden im Bereich von M3 bis M12 geeignet und verfügt über einen Druckluftmotor und ein Schnellspannfutter. Der stabile Arbeitsarm kann mit Hilfe des Anbauflansches direkt am Arbeitstisch befestigt werden. Es ist möglich, den Gewindebohrer flexibel an verschiedene Bohrungspositionen zu führen, ohne das Werkstück ausrichten zu müssen. Die Ausführung enthält einen einstellbaren Winkel, der das Kippen des Schnellspannfutters ermöglicht, wodurch neben vertikalem auch horizontales Gewindeschneiden realisierbar ist. Gujdpfx Ahjw Smr As Dsh Optional: - Werkbank mit 2210 mm (L) x 940 mm (B) x 820 mm (H)

Stanje: dober (rabljeno), Hagen & Göbel - HG22EB / Thread Cutting Machine - Model: HG 22 EB - Speed range: 180–1120 rpm - Table dimensions: approx. 600 x 500 mm - Foot switch Gedpfswk E S Hex Ah Douh Dimensions: L x W x H: 1.1 x 0.7 x 2 meters / Weight: approx. 1000 kg Errors and omissions excepted.

Stanje: dober (rabljeno), Leto izdelave: 1990, Naprave za rezanje navojev z dodatno opremo, proizvajalec SONE, tip 2000, 230V. Gusdsvk D Rpjpfx Ah Doh

Stanje: rabljeno, Internal Thread Cutting Machine Hagen & Goebel Type HG 124 Machine No. 4112 Year of manufacture: approx. 1980 Thread cutting capacity in steel: M3 to M10 Thread cutting capacity in cast iron: M3 to M15 Thread cutting capacity in brass: M3 to M17.5 Throat depth: 250 mm Quill stroke: 80 mm Table size: 345 x 245 mm Guedpfohgnd Aox Ah Djh Spindle speed: 200 – 1000 rpm Motor power: 0.55 / 1.0 kW Electrical connection: 380 Volt, 50 Hz - 6 speed settings via belt change (3 belt steps + 2 motor speeds) - Thread pitch via lead cartridge - 2 lead cartridges with 0.8 mm and 28 TPI thread pitch - Table height adjustment with rack and pinion via hand crank on round column - Spindle taper Ø 14.8 to 16 mm - Keyed drill chuck Ø 1 to 13 mm Required space (L x W x H): 900 x 500 x 1800 mm Weight: 260 kg In good condition

Stanje: generalkompletno obnovljen (rabljeno), Thread Rolling Machine - Thread Roller ORT RP18 2-Roll Under Power, See Video LOW PRICE - Special Offer Gjdpfx Ajwwmiyjh Deuh The machine is located in our warehouse in Gussago BS, under power Test run possible. Mimu Machine Tools Thread rolling is a mechanical, chipless process that can be performed cold or hot, aiming to improve surface finish (and thus fatigue strength).

Stanje: rabljeno, Leto izdelave: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/lead Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Workpiece Loading Device Type MZ 600, Year of manufacture approx. 1991, #3591 Max. workpiece diameter: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Starts: 1 Minimum/maximum centre distance tool–workpiece: 0 - 70 mm Godst Hwzcspfx Ah Djuh Whirling head swiveling: +/-12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/lead Whirling head drive: approx. 1.5 kW Total drive approx.: 4.5 kW – 220 V/380 V / 50 Hz Weight: approx. 1,700 kg Accessories / Special Equipment: Machine designed for the production of medical screws. Equipped with an automatic workpiece feeder via a Rübenach vibratory bowl with pneumatic swing gripper for insertion of blanks, as well as with counter-center (inserter) and ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and a cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, and the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electric program control with display of motion sequence. Fault indicator, workpiece counter, oil mist extraction, coolant system, etc.

Stanje: novo, Leto izdelave: 2025, minimalni premer metričnega navoja: 3 mm, največji premer metrickega navoja: 16 mm, skupna masa: 500 kg, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 200 mm, vrtilni moment: 24 Nm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 50 obr/min, moč: 0,005 kW (0,01 KM), The CMA 3-axis controlled tapping center is designed, among other things, for post-processing of laser-cut sheet metal parts and complete machining of, for example, small parts and tubes. The machine offers the following machining capabilities: - Tapping - Drilling (standard / with chip breaking / tube drilling cycle) - Countersinking - Flow drilling (with optimized feed curve) - Reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to e.g., Demmeler and Siegmund welding tables) - Radial tool compensation via patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector Godpfx Aherbz T Ne Deuh - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine gantry

Stanje: rabljeno, Leto izdelave: 2015, Thread diameter: 20 - 80 mm Grinding length: 3500 mm Gsdpow Ed S Usfx Ah Douh Thread pitch: . mm Min./max. thread length: 50 / 3500 mm Centre height: 400 mm Max. workpiece length: 4000 mm Control: Siemens 840-Dsl Feed rate U-axis: 0 - 2500 mm/min Feed rate W-axis: 0 - 2500 mm/min Feed rate B-axis: 100 rpm Total power requirement: 45 kW Machine weight: approx. 24 t Space requirement: approx. 10.7 x 4.6 x 2.9 m Thread grinding machine / profile grinding machine, suitable for: - Thread grinding of single- and multi-start ball screw spindles with Gothic profiles and special profiles - Diameters from 20 to 80 mm with a grinding wheel diameter of 350 to 500 mm - Max. centre distance up to 4000 mm Equipment / Accessories: - Grinding spindle: - Power: 14 kW - For grinding wheel diameters from 350 to 500 mm, cutting speeds from 20 to 75 m/s are adjustable. - Grinding wheels: - New diameter: 500 mm - Worn diameter: 350 mm - Bore diameter: 203.2 mm - Diamond form roll: - Diameter: 121.3 mm - Radius: 0.5 mm - Driver flange for workpiece diameters: 15-70 mm - Drivers: - For workpiece driving diameters: 10-32 mm - For workpiece driving diameters: 31-60 mm - For workpiece driving diameters: 60-105 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, as new, with large clamping table and height adjustment of approx. 400 mm of the head via hand crank and rack high-performance thread cutting machine up to M10 Gusdpfswt Au Rex Ah Djh

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Guodsuz If Njpfx Ah Doh Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Electronic Tapping Machine JT3150 - Extremely easy operation via display directly on the motor - Blind hole depth programmable Technical specifications: - Brushless motor 750 Watt 220V - Multifunctional head - 3-joint articulated arm system - Tapping capacity in steel: M3-M16 - Reach up to 1900 mm - Spindle GR2 Accessories: Gsdpfx Aehpqadoh Douh - Positioning magnet size 2 - Quick-change adapter size 2 - Collets for M3, M4, M5, M6, M8, M10, M12, M14, M16 - Motor-mounted control - Drill chuck (1-13 mm)

Stanje: rabljeno, Leto izdelave: 1986, Workpiece diameter 460 mm Thread length 900 mm Thread pitch 100 mm Total power requirement 10 kW Machine weight approx. 8 t Space requirement approx. m R E I S H A U E R (Switzerland) Universal - extra large - thread and worm grinding machine Model ULG 46 Year 1986 _____ ___ Grinding length: 900 mm Maximum workpiece clamping length: 1,190 / 1,400 mm Workpiece Ø / thread Ø, min./max.: 10 – 460 mm (!) Longitudinal adjustment of workhead on table: 210 mm Maximum workpiece weight approx.: 100 kg Work spindle bore approx.: 65 mm Lead range for single-rib wheels: 0.3 – 100 mm Maximum module: 10 Maximum lead angle: +/- 40° Grinding wheel dimensions, Ø x width: 350 x 20/40 mm Relief grinding size: 0.03 – 8 mm Presettable number of flutes: 2 – 10, 12, 14, and 16 27 workpiece speeds: 0.4 – 160 rpm Infinitely variable grinding wheel speeds: 72 – 2,500 rpm Godpfx Ajt H Smteh Deuh Spindle drive approx. 10 kW * Total connected load approx. 25 kW - 400 V - 50 Hz Weight approx. 8,000 kg Accessories / Special Features: • Machine was originally built with an increased center height for a maximum workpiece swing of 460 mm, allowing thread machining on larger workpieces and housings (aircraft industry)! • Internal thread grinding device with two dressing devices (long and short spindles) • Various flanges with grinding wheels • USL 3200 dressing device for pressure roll profiling, mounted above the grinding wheel (not motorized) • USL 700 dressing device for manual profiling of single-ribbed grinding wheel flanks • Automatic plunge-cut device. Automatic lift-off of grinding slide for the return of the workpiece slide • Relief grinding device with several cams, also suitable for plunge grinding • Hydraulic tailstock with foot switch and expansion compensation • Two simple dressing devices, manually operated for straight profiling • Two 3-point steadies for heavy workpiece support • Various flanges, set of change gears, numerous coolant nozzles, setting gauge, 3 faceplates up to 500 mm diameter, separate electrical cabinet for adjusting various grinding cycles • Lift-off safety hood above the working area, monitored by limit switches, etc. No coolant device available, but connection to a central coolant supply with valve control as well as a separate coolant chiller and standalone dust extraction unit.

Stanje: rabljeno, Leto izdelave: 1979, Maximum pipe diameter: 50 mm Guedoucgu Ajpfx Ah Djh No accessories included Pipe cutter/separator: yes

Stanje: rabljeno, Bench Drilling and Tapping Machine FLOTT Type TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling Capacity: 15 mm Spindle Taper: MT2 Throat Depth: 195 mm Quill Stroke: 80 mm Table Size: 275 x 200 mm Column Diameter: 70 mm Spindle Speed: 80 - 4500 rpm, 18 steps Motor Power: 0.55 + 0.75 kW Power Supply: 380 Volt, 50 Hz Godpfx Asdzp S Neh Deuh - 6 belt stages from motor and 2 belt stages to drilling spindle, 2 motor speeds - 3 pilot sleeves 0.7mm + 0.8mm and 28G included - Drill head height adjustment via hand crank with rack and pinion on the column - Original metal base Required Floor Space (L x W x H): 700 x 350 x 1850 mm Weight: approx. 150 kg Good condition

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 50 mm Thread length: 100 mm Thread pitch: mm Total power requirement: 1 kW Machine weight approx.: 1,500 kg Space requirements approx.: m MONNIER & ZAHNER Switzerland Horizontal thread and worm milling machine with workpiece loading device Type: 256 Year of manufacture: approx. 1985 # 1349 _____ Max. workpiece diameter: 1.5 – 50 mm Max. workpiece length: 100 mm Axial milling length: 100 mm Module in steel: 1 Minimum worm starts: 1 Min./max. center distance tool-workpiece: 0 – 70 mm Milling slide swiveling: +/- 30° Cutter size (Ø x length): 70 x 16 mm Cutter speeds approx.: 1,000 rpm Feed range, steplessly adjustable: 0 – 6 m/min Spindle drive: approx. 0.6 kW Total drive: approx. 1 kW - 220 V/380 V / 50 Hz Weight: approx. 1,500 kg Accessories / special equipment: • Simple machine for manufacturing (medical) screws or worm gearing onto shaft-shaped workpieces • LANDIS & GYR program control PCA • Fold-out workpiece magazine, incomplete Guedpfst Hwn Nex Ah Doh • Pneumatic tailstock slide, or steady rest support, approx. 100 mm stroke • Approx. 20 collets for workpiece clamping • Various change gears for generating thread pitches • Workpiece counter Condition: Good – ready for demonstration, under power Delivery: ex stock – as inspected Payment: strictly net – after order confirmation We have approx. 100 further gear machines in stock and welcome your inquiry.

Stanje: rabljeno, Internal Thread Cutting Machine HAGEN & GOEBEL Type HG 10 Thread Cutting Machine, Vertical Tapping Machine Machine No. 4462 Year of manufacture approx. 1980 Thread cutting capacity in steel: M3 to M10 Thread cutting capacity in cast iron: M3 to M16 Thread cutting capacity in brass: M3 to M18 mm Throat depth: 250 mm Quill stroke: 80 mm Table size: 340 x 240 mm Spindle speed: 200-1000 rpm, 6 steps Motor power: 0.55 and 0.75 kW Power supply: 380 Volt, 50 Hz Gedpfx Ahoupbf Dj Dsuh - 6 speed settings via 2 motor speeds and 3 belt stages - Thread pitch by means of guide cartridge - 2 guide cartridges included, with 1.0 mm and 1.25 mm thread pitch - Spindle mount with taper Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with rack-and-pinion and hand crank on the round column - Quick-change tapping chuck, size 1, Ø 19 mm Required space (L x W x H): 850 x 550 x 1800 mm Weight: 255 kg Good condition

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R Guedjtzdyzjpfx Ah Dsh We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. Gedpfx Aet Hw N Toh Deuh • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: rabljeno, Leto izdelave: 1985, Thread diameter 254 mm Gusdpfx Ahjt Hw U As Deh Grinding length 350 mm Thread pitch 51 mm Control SIEMENS S 8 Total power requirement 12 kW Machine weight approx. 5000 kg Space requirement approx. m Internal thread grinding machine with PLC control