Stroj za rezanje navojev 1/2-2 cola

Rothenberger SM-300

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, število valjev: 3, Premer zgornjega valja 280 mm, 12 mm predupogib, zmogljivost 18 mm (3x premer zgornjega valja). Teža 7.100 kg. Lhedowtp Haepfx Aacec

Stanje: zelo dobro (rabljeno), Pressure: 0.5 - 20 t Workpiece diameter: max. 5 - 75 mm Thread length: 2000 mm Pitch: 8 mm Roll spindle mount diameter: 69.85 mm Tool diameter: 200 mm Roll spindle speed: 20 - 90 rpm Stroke: 0 - 20 mm Total power requirement: 7.5 kW Machine weight: approx. 3.1 t Ledpfx Aaovpaa Recjhc Space requirement: approx. 1.9 x 1.1 x 1.2 m

Stanje: novo, Table length 3000 mm Table width 1500 mm Table height 850 mm Side clamping surface: 200 (height) mm Weight 1517 kg SIEGMUND authorized dealer – all items available! Product Description - High-quality steel S355J2+N + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Borehole Ø 28 mm - Boreholes on surface with 100x100 mm grid - Corners, edges, and holes rounded - Height of side panel 200 mm - Borehole spacing on side panel 50 mm - Includes surface scaling - Construction reinforced by ribs - Grid lines allow for precise setups The welding tables are equipped with a scale as standard. Lhjdpfx Aajxaa Nvscsc Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion resistant / increased load capacity Features: - 28 mm hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - Incl. 6x leg base equipment

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm Lhedjt Apugopfx Aacec See video The machine is located in our warehouse in Gussago (BS), powered on Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Stanje: novo, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid materials, profiles of all kinds. Materials: Hard or soft steel, non-ferrous metals, plastics. Working process: Once the workpiece support and side stops are set, the burr-laden workpiece is lightly pressed against the brush, which rotates on its own axis. The workpiece itself does not need to be rotated, as this motion is performed by the brush. The type of workpiece material, burr thickness, as well as the desired edge rounding determine the contact pressure and duration, typically around 1–5 seconds. Technical Data: Material: Steel, stainless steel and non-ferrous metals (motor speeds 700–1,900 rpm, stepless) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 or 3 pieces Ø 300 (250) x 35 Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rated current: 8A Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max. speed 82 dB(A) Scope of delivery: GRATMAXX rotary head deburring brush machine with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement Brushes not included in delivery! Accessories: F50201 Circular brush braided wire 0.38 mm F50202 Circular brush steel wire 0.2 mm F50203 Circular brush steel wire 0.38 mm F50204 Circular brush stainless braided wire 0.38 mm Lhedpjd Hmnfefx Aacoc F50205 Circular brush abrasive nylon U180 F50206 Circular brush abrasive nylon U120 F50207 Circular brush stainless steel wire 0.20 mm Further technical details can be found in the attached PDF document.

Stanje: novo, Leto izdelave: 2025, The MG20B is suitable for bending your reinforcing steel into the desired shape. Product Information: - Voltage: 380 V (optionally available with 220 V) - Motor power: 1.5 kW - Machine dimensions: 60 cm x 45 cm x 32 cm - Frame dimensions: 57 cm x 44 cm x 60 cm - Ideal for your construction company or for use on construction sites - Easy to transport - In addition to single bend operation, a bending sequence can also be programmed - Inserts for different rebar diameters are included as accessories (including accessories, see images) - Can be operated in automatic or manual mode Lhedpfx Ajm Sgx Doacec - Bending capacities depend on the steel grade, as per the table (see images) - Optionally available with a digital control panel - Net weight: 95 kg Shipping: Europe-wide (self-collection also possible) If you have any further questions, please do not hesitate to contact us!

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U 2-valjna 30 ton Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Moč (tona): 30 Število valjev: 2 Lhodpfet H Ty Usx Aacoc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, laserske ure: 5.780 h, laserska moč: 4.000 W, TRULASER TUBE 7000 FIBER 4kW Letnik proizvodnje: 07/2019 Moč laserja: 4 kW fiber Obratovalne ure laserja: 5780 h (!) Tehnične informacije: - Največji zunanji premer: 254 mm - Nakladanje in razkladanje - Nakladanje z LoadMaster Tube: 6,5 m / Avtomatsko razkladanje: 4,5 m - RapidCut • Uporaba dinamične dodatne osi • Možne več kot štirikratne pospešitve - Paket za poševni rez • Poševni rez do 45° • Vključuje električno premično prehodno glavo - PierceLine • Optimiziran postopek prebijanja - Paket tehnologije za izdelavo navojev • Dodatni postopki obdelave kot so termo vrtanje, rezanje navojev in spiralno vrtanje • NC-krmiljeno vreteno s standardnim vpenjalnim sistemom (standardni vmesnik HSK-A32) • Parametre uporabe in tehnologije adapterja ter orodij je treba zahtevati pri posameznem dobavitelju • Osempozicijski avtomatski menjavalec orodij Ledpfxjyalb Ej Aacehc ... in veliko drugih možnosti!

Leto izdelave: 2014, obratovalne ure: 7.500 h, Stanje: rabljeno, M2 GmbH offers you the following machines: - BAUER MC 96 - BAUER HDS 100 - BAUER BC 40 Lhjdpfeh Tyzfex Aacoc Further information available upon request!

Stanje: novo, Table length 1590 mm Table width 1490 mm Table height 840 - 890 mm Lhsdpfx Aash Dqb Dscec Machine weight approx. 0.4 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15. Surface is untreated. Side walls 165 mm Height adjustable from approx. 880 - 980 mm Bottom side ribbed for reinforcement. Including floor bearings Accessories optional!! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.