Naprave za čiščenje strojev in delov nakup rabljenega (127)

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.500 kg, teža obdelovanca (maks.): 750 kg, številka stroja/vozila: F101, TEHNIČNI PODATKI Moč črpalke: 5,5 kW Moč grelnega elementa: 4,2 kW Največja obremenitev vrtljive košare: 750 kg Priključek za stisnjen zrak: največ 10 barov PODATKI O STROJU Hsdpfoxztt Dox Ab Tefr Lastna teža: pribl. 1.500 kg Električni priklop Priključitev: 400 V Poraba toka: 63 A Frekvenca: 50 Hz

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Spray Cleaning System Type L102 Basket: ø 910mm, 2 pumps ✓ Wash cycle timer 0–60 minutes ✓ Integrated control cabinet with indicator lights and operating elements ✓ Gas struts for lid ✓ Machine body in stainless steel 1.4301 ✓ Electric heating, thermostat controlled 0–60°C ✓ Level control and dry-run protection for heating element ✓ Circulation pumps with mechanical seal ✓ Basket drive with geared motor ✓ Basket rim Technical Data: Hfedpfxjhp Dvqo Ab Tsr - Usable height: 500 mm - Basket rim height: 150 mm - Load capacity per batch: 200 kg - Batches per hour: approx. 2–10 - Total width incl. control cabinet: 1,250 mm - Total depth (lid open): 1,300 mm - Total height (lid open): 1,990 mm - Tank capacity: 175 l - Spray pressure: 2 x 2.4 bar - Circulation rate: 2 x 110 l/min - Operating voltage: 400 V/N/PE 50 Hz - Heating power: 6.0 kW - Pump power: 2 x 1.0 kW - Rotation drive: 0.18 kW - Total connected load: approx. 8 kW The unit is available for demonstration, fully operational, in our showroom in Stuttgart. Additional operating hours may accrue. As a partner of Glogar, we supply systems and compatible cleaning chemicals. The machine is available for immediate delivery (subject to prior sale). We offer technical services such as maintenance and commissioning in Baden-Württemberg. Offer price plus shipping costs.

Leto izdelave: 2020, Stanje: dober (rabljeno), številka stroja/vozila: 054889, Aduna K100 dvo-komorna čistilna naprava (pranje + izpiranje) z vakuumskim sušenjem. Vključuje naslednjo opremo: vakuumsko sušenje (Busch-pumpa, rotacijska lopatična črpalka tip RA), tlačna in pretočna pršilna funkcija z možnostjo hitrega polnjenja, pršenje s 4-krakimi šobami, ojačan črpalni sistem 5,5 bar, izpihovanje šob proti prenosu medija, impulzno sušenje s toplotno vezavo, filtracija ostružkov (vrečasti filter) v povratnem mediju, avtomatska drsna vrata (vertikalna s preglednim oknom), oljni separator, kondenzator pare za robove hlajen z zrakom, uporabniku prijazen, programabilen krmilnik, časovno stikalo, avtomatska regulacija nivoja medija, avtomatska dozirna naprava, kaskadno prelivanje iz rezervoarja 2 v rezervoar 2, možnost daljinskega servisa. Avtomatska nakladalna enota (zaloga za 3 košare v območju nakladanja, 1 košara pred komoro, 3 košare v območju razkladanja – 3-1-3), 8 kosov euro-standard košar (dimenzije: 670x480x400 mm), max. obremenitev: 100 kg. Hfodpfx Aexz S Utob Tor Priključna moč: 27 kW, 55 A. Dimenzije po priloženi skici.

Stanje: rabljeno, Leto izdelave: 2019, Technical specifications: Pressure: 1.5 / 0.15 bar / MPs Flow rate: 4,500 l/h Working diameter: 600 mm Usable height: 310 mm Housing/frame: Stainless steel Heating capacity: 4.5 kW Max. temperature: 80°C Adjustable cleaning time: 1 - 30 min Load capacity: 130 kg Connected load: 5.5 kW Tank capacity: 100 l Dimensions (LxWxH), approx.: 1080 x 1000 x 1250 mm Weight, approx.: 165 kg Hfedpfswpq Abex Ab Tsr Features: - Fully automatic parts cleaning - Motor-driven turntable - 3-dimensional spray nozzle system - Operating hours counter - Retaining ring (stainless steel for turntable) - 2 lockable swivel castors - Timer for cleaning cycle - Water level control

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21224, 2-stopenjska pralna naprava z dvižnimi vrati Električno ogrevanje, skupna moč cca 50 kW Nosilnost: 1000 kg Največja velikost delov: premer = 1400 mm, višina = 800 mm Vsi parametri nastavljivi Priložena dokumentacija in navodila za uporabo Hjdex Hplvjpfx Ab Tefr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna širina: 1.750 mm, skupna dolžina: 1.750 mm, skupna višina: 1.700 mm, vrsta vhodnega toka: trifazni, Automatic Basket Washer HYDRO WASH 1200 2-in-1 is a multifunctional device designed for fully automatic washing of parts in a motor-driven rotating basket or, for more complex-shaped components, high-pressure washing at 140 bar. This combination of processes ensures that the device is suitable for use in any workshop. It is ideal for companies specializing in the regeneration of turbochargers, steering gears, or gearboxes, significantly improving workflow efficiency. To guarantee user safety and maintain optimal washing parameters, the washer is equipped with an electronic control panel and a set of cooperating sensors. Operating principle: Before first use, fill the tank with washing liquid. The recommended cleaning solution is a mixture of MRS Cleaner Strong concentrate and water in the appropriate ratio. The Hydro Wash washer enables both manual and automatic washing. a) For automatic washing, prepare the unit (fill with water and concentrate), close the glovebox cover, close the lid by pressing and holding the two buttons (front and rear of the unit simultaneously), then press the start button. *Basket rotation is possible with the lid open. This is done by pressing the right button on the foot pedal or simultaneously pressing both buttons (front and rear of the unit), providing the glovebox cover is closed. b) For manual washing, close the lid by pressing and holding both buttons (front and rear simultaneously). Open the glovebox cover and press the left button on the foot pedal. STANDARD EQUIPMENT INCLUDES: - Lid-release sensor for opening during the washing process - Liquid level sensor in the tank (dry-run protection) - Liquid temperature sensor - Adjustable spray arms with high-quality stainless steel nozzles from Spraying System - Mechanically driven rotating basket - 140 bar high-pressure pump - Compressed air gun - Pressure regulator with air/water separator - Coarse insoluble contaminant filter (0.8mm mesh filter) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic actuators Technical Specifications: Basket diameter: 1200 mm Working height: 500 mm Basket load capacity: 300 kg Programmable operation time: 0-99 min Washing temperature: 60℃ Heater power: 12 kW Tank capacity: 400 l Spray output: 200 l/min Spray operating pressure: 4.5-6 bar Manual washing pressure: 140 bar Overall width: 1750 mm Overall depth: 1750 mm Overall height: 1700 mm (2450 mm with lid open) Power supply: 3~400V Hedpfoxm Ulljx Ab Tsfr Optional extras: - Belt oil separator - Set of low-pressure lances - Reinforced pump WE ALSO OFFER HYDRO WASH 2-IN-1 WASHERS IN OTHER SIZES. MODELS 800 AND 1000 AVAILABLE. CONTACT US FOR DETAILS ON OTHER MODELS.

Leto izdelave: 2008, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Bio-Circle Parts Cleaner 2 units available For active environmental protection Colour: Green/Grey The ultimate cleaning wash table – parts cleaner is in good used condition. Protective floor made of stainless steel perforated sheet The Bio-Circle wash table – cleaner, compact wash table, uses an electrically powered pump to deliver cleaning fluid to the 3-way valve. Depending on the position of the 3-way valve, the fluid can be supplied to the table via the hose with a washing brush, including a tray for the work surface with the flexible hose, or both. Operated with Bio Circle L Liquid, the tank in the parts washer breaks down, for example, oil/grease cleaned off the parts, and the used cleaning fluid is decomposed by microorganisms according to the Bio-Chem Surface Technology operating manual. The used parts cleaner and/or the cleaning brush soaking tank for natural biological parts cleaning is equipped with integrated heating, pump, aeration, filter, and has been regularly maintained. The magnet in the drain sieve retains steel particles. The parts washing system is fully functional and in good condition. Environmentally friendly cleaning for environmental protection. Dimensions of the parts cleaning unit: Parts cleaner H 1120 x W 900 x D 600 mm, weight 45 kg. Inspection under power possible by appointment. Price/details on request. Hodpsfhdnbofx Ab Tsfr All technical data subject to errors and omissions. Sale exclusively to countries of the European Community.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), From our showroom in Stuttgart, we regularly sell our demonstration units. These systems have been used for demonstration purposes. Subject to prior sale. Offer plus transport costs. All information provided without guarantee. We offer maintenance and service for Glogar cleaning systems. HD Wash Table – HD Brush Wash Table The wash table features an adjustable 60 bar high-pressure pump, enabling cleaning to take place within an enclosed workspace. Cleaning is performed using an aqueous degreaser at approximately 45°C. - Viewing window with integrated lighting - Media filtration via cartridge filter - User-friendly foot switch operation - Includes rotary table Technical data: - Working surface: 800 x 600 mm - Usable height: 400 mm - Load capacity: 50 kg - Operating pressure: adjustable up to max. 60 bar - Pump output: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank capacity: 100 l - Heating power: 3,000 W - Total power consumption: 7.0 kW - Voltage: 400 V AC 1P+N+PE; Frequency: 50 Hz - Machine weight: approx. 140 kg - Overall dimensions with lid open: 1,100 x 910 x 2,020 mm Hfodpfx Aegrm Egsb Tsr

Leto izdelave: 2019, Stanje: rabljeno, številka stroja/vozila: IntNr231388, Technische Beschreibung – PERO RO Industrielle Teilereinigungsanlage auf Lösemittelbasis Die PERO RO ist eine leistungsstarke industrielle Teilereinigungsanlage zur effektiven und umweltgerechten Reinigung von Werkstücken und Bauteilen mit Lösemitteln. Sie eignet sich für unterschiedlichste Anwendungen in der metallverarbeitenden Industrie und garantiert hohe Sauberkeitsstandards bei wirtschaftlichem Betrieb. Merkmale: • Reinigung mit organischen Lösemitteln (z. B. Kohlenwasserstoff oder modifizierte Alkohole) • Geschlossener Arbeitsprozess mit integriertem Lösemittelkreislauf • Geeignet für kleine bis mittlere Chargen und variierende Bauteilgeometrien • Automatisierte Prozesssteuerung für reproduzierbare Reinigungsergebnisse Hjdpoxxvrdefx Ab Tjfr • Robuste Bauweise für den industriellen Dauereinsatz Typische Einsatzbereiche: • Entfettung von Dreh- und Frästeilen • Reinigung vor Montage oder Beschichtung • Entfernung von Kühlschmierstoffen, Ölen und Partikeln Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden. Änderungen und Irrtümer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten! Technical Description – PERO RO Industrial Solvent-Based Parts Cleaning System The PERO RO is a high-performance industrial cleaning system for the efficient and environmentally responsible cleaning of workpieces and components using solvents. It is designed for a variety of applications within the metalworking industry and ensures superior cleanliness standards with cost-effective operation. Features: • Cleaning with organic solvents (e.g. hydrocarbons or modified alcohols) • Closed process cycle with integrated solvent circulation • Suitable for small to medium batch sizes and varying component geometries • Automated process control for consistent, repeatable cleaning results • Sturdy construction for continuous industrial operation Typical Applications: • Degreasing of turned and milled components • Cleaning prior to assembly or coating • Removal of coolants, lubricants, oils, and particulates The machine is available for inspection under power by prior appointment. Subject to modifications and errors in technical data and specifications. Prior sale reserved!

Leto izdelave: 2014, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For continuous cleaning of components Continuous-throughput cleaning system made of stainless steel, equipped with oil separator for uninterrupted material flow. The items to be cleaned are conveyed continuously, or in cycles if required, through sequential treatment zones. Cleaning is performed as the workpieces pass by fixed nozzle systems. Suitable for parts with approximate dimensions of 400 x 100 mm. A wire link conveyor transports the parts through the cleaning system, either lying flat or standing upright. - Surrounding nozzle frame – offset nozzle arrangement enables all-round cleaning - Separation of treatment zones reduces cross-contamination - Customisable nozzles and frames for specific components - Adaptable working dimensions, load capacities and pump performance available upon request Process steps are performed in consecutive treatment zones: - Spray cleaning with sequential wet treatment zones (washing, degreasing, phosphating, rinsing, passivating) - Drying Tank volumes: Washing tank: 800 litres Rinsing tank: 500 litres Heating power: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pump: 3.0 kW Rinsing tank pump: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine comes with stainless steel drip trays for leakage protection. These are included in the price and will be supplied. Hfodpfsxcun Eex Ab Tsr TWO IDENTICAL MACHINES AVAILABLE

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Cleaning System Type W 60 C Machine body, internal piping system, control cabinet, and washing basket made of stainless steel Combination machine – rotating table system with removable tilting device and small parts basket - Basket diameter (rotating table washing basket): 600 mm - Usable internal height: 370 mm - Basket load capacity (rotating table washing basket): 100 kg - Usable internal height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm Hfodpfx Abjq Ewgko Tor - Mesh size: 12 mm - Basket load capacity (small parts basket): 20 kg Full stainless steel construction Pump(s) and external piping/fittings version Suitable for operation with liquids with a density of 1.3, featuring a reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO rinse (minimized rinse loss) for minimal water consumption Water supply from operator's mains with machine-side hot water supply Hot air drying 1 x 4 kW Oil skimmer Discharge device/floor flushing with pump and piping system in stainless steel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.200 mm, skupna višina: 2.100 mm, skupna širina: 2.500 mm, lastna masa: 750 kg, vhodna napetost: 400 V, kapaciteta rezervoarja za vodo: 400 l, trajanje garancije: 12 meseci, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of DPF DUO Premium: -> A separate dryer doubles the work efficiency -> We are the only ones to offer a large-diameter hose for connecting the DPF. Larger diameter = more water = more effective cleaning -> Our filter mounting system does not require any elements to be placed inside the DPF filter tube that could obstruct the water stream. This allows full utilization of both water and air pump performance, thus reducing regeneration time. -> A spacious cabin enables flexible mounting of the filter to be cleaned. Based on his experience, the operator can select the optimal position for washing the filter. Hodpfx Asxm Szqob Tefr -> Protection against excessive pressure in the filter during cleaning. -> Protection against lack of airflow in the filter during drying. -> Individual cleaning program settings tailored to the filter's capacity -> Stable filter locking during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Option for on-site training at the customer’s location The device removes soot and ash from DPF/FAP filters without negatively affecting the filter’s structure, restoring up to 99% of its original flow capacity. Our technologists have ensured that both the cleaning procedure and the detergents used are safe for the environment and machine operators. Using an endoscopic camera, the operator checks the filter for mechanical damage. If melting, cracking of the ceramic insert, or other visible signs of mechanical interference affecting the DPF are detected, regeneration is not possible. The regeneration process takes place in a sealed chamber with filters, preventing harmful contaminants from escaping into the workplace. The water–detergent solution circulates in a closed loop and is filtered throughout the process, significantly extending the service life of the bath. DPF DUO Premium cleans filters with water, chemicals, and air. The electronically controlled sequence of water and chemical delivery, combined with air and compressed air pulses, ensures high regeneration efficiency. Upon completion of cleaning, the filter is dried with 90°C air, guaranteeing complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement, which can also be conducted before cleaning—allowing for comparison of results before and after regeneration. The unit features a printer for printing out the test protocol. Cleaning time for passenger cars or vans is 20–40 minutes, enabling the regeneration of up to a dozen filters within 8 hours. High efficiency, combined with low operating costs, ensures rapid return on investment.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, temperatura: 60 °C, nosilnost: 250 kg, SUMMA DC3/OSK Rotary Basket / Drum Cleaning System, Carousel Degreasing System with Dryer The chamber rotary machine from the Czech manufacturer operates on the pressure-spray principle. This degreasing unit offers three surface cleaning options and is suitable for the degreasing of a wide range of materials. Hfedpfewty H Dsx Ab Tjr Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770 x 500 mm Max. workpiece weight: 250 kg Electrical power: 23 kW Bath temperature: max. 60 °C Air temperature: max. 120 °C Bath heating (rinse): 12/6 kW Drying air heating: 13.5 kW Aerosol pressure: 0.28 MPa Pump capacity: 70 liters/minute Machine weight: 520 kg Machine dimensions: 1800 x 1800 mm Height: 1500 mm Do you need more information? We are happy to assist you! Please contact us using the contact form or call us. This listing was automatically translated. Translation errors may be possible.

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Automatic KLT container washer, tray washer, continuous pass-through washing machine for various components - washing - rinsing - oil removal - drying - 2 lanes - 2 x 600 KLT containers/hour - external heating - transport, dismantling and loading possible Crates, KLT inserts and lids – continuous pass-through washing plant. Maximum passage width: 300 mm Maximum passage height: 650 mm Contaminants: dust, mineral grease, mineral oil, metal chips System description The installation and piping are made of high-quality stainless steel to ensure long service life. The machine is a two-lane chain-type continuous washer. The unique modular construction allows the extension of an existing plant at any time, ensuring that capacity can be scaled as production grows. The system can be expanded to meet additional requirements as your operations develop. Hot water heating: heat exchanger in the washing tanks for the heating circuit. Recommended supply temperature: 90°C Spray tubes: screwed Oil separator: three-phase separator with pneumatic diaphragm pump and prefilter on all tanks. Parts counter on both lanes. System features: - stainless steel infeed module - stainless steel wash module 1 - stainless steel wash module 2 - stainless steel cold air blow-off - stainless steel warm air drying module - stainless steel warm air drying module - stainless steel outfeed module - transport system - drive system with stepless adjustable conveyor speed - heating: tube heat exchanger in the wash tanks - control cabinet with electrical control - access and cleaning doors on both sides of the machine - thermal insulation of wash tanks and sound insulation of fans Technical data: Overall dimensions: Length: 12,350 mm Width: 1,950 mm (2-lane) Height: 2,800 mm (total height incl. fans) Electrical power consumption: Washing pump 1: 7.50 kW Washing pump 2: 7.50 kW Cold air blow-off: 5.50 kW Warm air blow-off 1: 2x Warm air blow-off 2: 2x Warm air heating unit: 4x Drive: 0.55 kW Exhaust air fan: 3.00 kW Hjdpfewi Nl Iex Ab Tefr Voltage: 400 V Frequency: 50 Hz Protection class: IP 55 The system control cabinet is placed next to the machine. It contains all necessary components for the operation and monitoring of the complete system.

Leto izdelave: 2017, Stanje: rabljeno, številka stroja/vozila: IntNr231417, Descripción técnica – PERO RO Fabricante: PERO AG Modelo: RO R1 / 414-EX Año: 2017 / 10 Tipo de máquina: Sistema de limpieza / Desengrasadora Proceso: Limpieza con disolvente (p. ej., alcoholes modificados o hidrocarburos) Datos técnicos (típicos para esta serie): Sistema de limpieza: sistema de circuito cerrado, totalmente automático Hsdexvy Dxspfx Ab Tofr Dimensiones de la cámara de trabajo: aprox. 530 × 320 × 200 mm Peso máximo de carga: aprox. 50 – 80 kg Disolvente: alcohol modificado (a base de hidrocarburos) Secado: secado al vacío Control: control PLC con panel táctil Equipamiento: unidad de destilación integrada, sistema de filtrado, separador de aceite Consumo de energía: aprox. 10 – 15 kW Bomba de vacío: integrada Estado: Muy buen estado, bien mantenida – en producción continua Características especiales: Sistema de limpieza energéticamente eficiente con circuito de disolvente cerrado Alta calidad de limpieza con consumo mínimo de disolvente Ideal para industrias de precisión y mecanizado Se puede inspeccionar en funcionamiento previa cita. ¡Sujeto a cambios y errores en los datos técnicos y especificaciones, así como a venta previa!

Stanje: zelo dobro (rabljeno), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system design - Cleaning of tall and long components - Easy operation, compact construction - Low-maintenance operation - Base unit in stainless steel - Environmentally friendly Concept The Rosink Front Loader RFL offers you an economical and user-friendly solution—especially suitable for cleaning tall components. The proven Rosink cleaning technology and top quality are combined in a single system. The basic configuration is a single-bath system, standard with a rotary table, which can be extended to a multi-bath system on request. Different programs can be run within the wash chamber, depending on equipment and requirements, such as washing, rinsing, drying, etc. Features Base unit in stainless steel 1.4301 Tank with sloping bottom Tanks and wash chamber including cladding and insulation Rotary platform drive with four-point support Vertically opening, pneumatically operated lifting door with two-handed safety operation Stainless steel 1.4301 transport trolley or loading table with drip tray Pre-filtration using return flow filter baskets with selectable insert (200 μm or 500 μm) Front-mounted control panel with PLC controller (stores up to 5 programs) Flat spray nozzle system, all parts in stainless steel 1.4301 Automatic bath refill system with level control Maintenance and inspection ports for wash and rinse tanks Technical Data RFL 1650—variable depending on configuration Width: 2,900 mm Height (closed/open): 2,800/4,500 mm Depth without/with transport trolley: 2,650/4,500 mm Grid load capacity: 1,000 kg Grid dimensions: 1,320 x 1,320 mm Grid diagonal: 1,650 mm Mains voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V/DC Sump capacity (washing): 750 l Sump capacity (rinsing): 500 l Hodpfsx Exuqox Ab Tjfr Pump power (washing): 7.5 kW with 630 l/min at 4.5 bar Pump power (rinsing): 4 kW with 250 l/min at 5.5 bar Drying: 12 kW Heating power (cleaner): 36 kW Heating power (rinsing): 27 kW Weight: 3,600 kg More articles—new and used—can be found in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.650 mm, skupna širina: 1.770 mm, skupna višina: 1.580 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, pritisk: 5 letvica, temperatura: 75 °C, moč: 15,4 kW (20,94 KM), največja dovoljena obremenitev: 350 kg, teža obdelovanca (maks.): 350 kg, premer kletke: 1.100 mm, Industrijski pralni stroj za čiščenje in razmaščevanje kosov z uporabo alkalnega čistilnega sredstva. Stroj je popolnoma izdelan iz nerjavečega jekla AISI 1.4301. Opremljen z dvojnimi stenami z izolacijo vmes. Vrtljiv koš za dele s šobami za čistilo zgoraj in spodaj. Vgrajen filter za grobe nečistoče. Opremljen s črpalko za čistilo in izpustno črpalko za izčrpavanje porabljene čistilne tekočine. Plovni stikala v rezervoarju za zaznavanje nivoja tekočine. Nadzor morebitnih puščanj. Krmilna omarica z digitalnim prikazom temperature. Omarica opremljena s signalno lučko za prikaz stanja. Stroj je v zelo dobrem stanju in je takoj pripravljen za uporabo. Hjdpfx Aewfdpmob Tefr

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), A manual partial cleaning machine D.W. Renzmann for the printing industry, complete with exhaust air system, is available. Useful dimensions (X/Y/Z): 1800mm/600mm/300mm, washing pump capacity: 5 m³/h, internal extraction: 2000 m³/h at 1.1 kW, overall dimensions (X/Y/Z): approx. 2900mm/1200mm/1800mm. Documentation is available. On-site inspection possible. Hsdpfxstul Nvs Ab Tefr

Leto izdelave: 2024, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Optima Steamer XD Parni čistilec Nov z garancijo Dizelski parni čistilec 0 delovnih ur Hodpfx Ajh Izgqeb Tefr Z dodatki 2 x parna cev 10 metrov 2 x parna pištola Čiščenje strojev Čiščenje vozil Avtopralnica

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, trajanje garancije: 12 meseci, vhodna napetost: 400 V, skupna višina: 1.250 mm, skupna širina: 1.000 mm, skupna dolžina: 1.080 mm, raven hrupa: 65 dB, We offer for sale a Parts Washer PC 60/130 T Catalog number: 1.626-704.0 Year of manufacture: 2016 All equipment purchased from us comes with a 12-month WARRANTY. Equipment features: • Operating hours counter • Stainless steel protective grid • Swivel castors, 2 with brakes • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pumping capacity: 4,500 l/h • Connected load: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Housing / frame: Stainless steel (1.4301) • CE tested • Heater power: 4.5 kW • Maximum temperature: 80 °C • Wash time adjustable: 1 / 30 min • Load capacity: 130 kg • Acoustic pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz Hfodpfx Abswzwuzo Tjr • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, with easy operation ensured by a clear control panel and indicator lights showing all stages of operation. The washing liquid temperature is maintained between 35 and 80°C and is controlled via a thermostat. Thanks to specially designed housing profiles (mechanical labyrinth seals), the PC 60/130 T does not require perishable rubber seals. Gas springs with dampers ensure easy lid opening, while a ball valve simplifies draining of the washing fluid. The Kärcher parts washer operates in a closed-loop system (using an electric pump) with a water-based cleaning solution, not solvents, so operators are not exposed to toxic gas emissions.

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 14.441 h, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.450 mm, skupna širina: 1.850 mm, skupna dolžina: 4.300 mm, Currently in stock. Immediately available. Hfedjvb Hpvopfx Ab Ter The system has been completely overhauled as of 22/01/2025.

Stanje: zelo dobro (rabljeno), BIO-CIRCLE Model: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Cleaning System The RWR units from Bio-Circle are the optimal solution for cleaning internal circulation systems—without disassembly. Hedpetqfbbjfx Ab Tsfr The unit is compact, quiet, and very easy to operate. Thanks to its completely closed system, there are no odours from the cleaning agent or contaminated water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz, 16A CEE 5p 6h plug Drain → 1 1/4" outlet Technical Specifications: Type of contamination: Scale, rust (mineral), oil, grease Number of parts: Single components, small series, low volume Component geometry: Whole parts (no disassembly) Seal of quality: Stainless steel, service package available Maximum fill volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of cleaning unit without tank filling: 180 kg Application area: The RWR 80 L KST Fully Automatic PLC is designed for plastic injection moulding applications and everywhere cooling channels (circulation systems, pipelines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the unit is switched on, it begins to heat up. During the heating phase, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and flow direction change run automatically after confirming the instructions displayed on the screen. Condition: Used Scope of delivery: (See picture) (Subject to changes and errors in the technical data. Information is provided without guarantee!) For any further questions, we are happy to assist you by phone.

Leto izdelave: 2014, Stanje: rabljeno, Container Tanker Cleaning Station JetPetroClean Manufacturer: OU Dontal, Estonia The installation is designed for cleaning the interior of tanks after petroleum products, particularly railway tankers. The cleaning process runs in a closed-loop system using hot water or hot water with detergents. Cleaning is performed by inserting a washing head through the top manhole of the tanker, followed by washing the tank interior at a specified pressure. The dirty water is drained via the bottom inlets of the tanker using diaphragm pumps into a container tank. There, after separating contaminants, the water returns to the circuit and is reused for further cleaning. Cleaning one tanker takes approximately 1 hour. The next step is drying the interior and removing solid wastes from the tank using exhaust fans. After the cleaning process, the installation is purged and dried using compressors. 1. Main Container Unit: - 20-foot container – year of manufacture: 2014 - Two Lowara main pumps – year of manufacture: 2014 - Hydraulic system with pressure gauges Hodohgimdepfx Ab Tsfr - Wash water tank (5770 L capacity, waste tank 2540 L) - Control cabinet - Compressed air tank 2. Auxiliary Unit: - 20-foot container – year of manufacture: 2012 - Two GD ESM 11-7.5A compressors – year of manufacture: 2013 - Gas generator – year of manufacture: 2015 - Control cabinet - Meganex 15 kW electric heaters – year of manufacture: 2014 - Four Soler&Palau CBRT/2-502 5.5 kW fans – year of manufacture: 2014 - Two diaphragm pumps - Compressed air tank 3. Waste Tank in Container Housing 4. Rigid steel pipes and flexible plastic pipes 5. Structures, platforms, stairs, and railings for tanker servicing 6. Washing heads, elbows, valves, and other hydraulic system components. Technical condition: Used installation, requires technical inspection prior to re-commissioning.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, 2-tankovni sistem Čistilni medij: modificiran alkohol Mere košare: D 530 x Š 320 x V 200 mm Vakuumska destilacija Ultrazvok Vakuumsko sušenje Teža serije: 50 kg Hfjdsxqyiwjpfx Ab Tjr

Stanje: nepreverjeno (rabljeno), DÜRR Type: DÜRR 1K Adhesive Application System Dürr 1K adhesive application system with drum pump, metering unit, and heated hose (approx. 5 m). Technical machine description: Condition of the system: Drum pump, feed hoses, metering unit, etc. are contaminated with old adhesive and need to be cleaned or replaced. The system has approx. 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Max. air inlet pressure: 6 bar Dimensions: approx. 1.5 x 1 x 1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Hsdpfx Abjrdyb Aj Tofr Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have any further questions, we will be happy to assist you by phone.