Pralna miza za čiščenje delov

CB Chemie und Biotechnologie GmbH BioCircle Teilereiniger

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. Hsdjfzktzspfx Ag Tji We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Hodpfx Asu Aa I Sog Tji Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), TECHNICAL DATA - Main beam: IPE 600 mm (various sizes & load capacities available) - Secondary beam: Sigma 410 mm (also available in 220 & 260 mm) - Decking: chipboard P6, double-sided coated, 38 mm - Load capacity: 500 - 1,000 kg / m² - Colour: RAL 9010 Pure White - Condition: used Hjdjgpxf Hjpfx Ag Toi Large quantities available directly from our Nordhorn warehouse. The IPE 600 allows for large span widths! Delivery scope: - Columns - Main and secondary beams - Cross bracing - Floor decking PRICING: from €40.00 net per m² Prices may vary depending on the specification (load capacity and column spacing). Please contact our team. We are happy to advise you. Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is available for an extra charge. Additional costs depend on the delivery location and the scope of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is a unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveying technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favourable conditions. Please feel free to contact us if you have any questions. Four wins – The success components of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) Hedpfx Ajf Sqckeg Tei The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 2.000 mm, merilno območje os Z: 1.000 mm, Measuring ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Hedpfedv I Absx Ag Tsi Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000] µm CNC control: Renishaw UCC S5 Handheld terminal: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe change system: Renishaw (Price REVO approx. €80,000 new) Software: Inspect3D Inca V6 new license (all languages) Original year of construction: 2014, modernized in 2017 and 2025 Exchange for another CMM possible

Stanje: rabljeno, Leto izdelave: 2003, NAKAMURA TOME SUPER NTJ CNC-STROJNO STRUŽENJE FABRIKAT: NAKAMURA TOME, JAPAN Hedsv I Tx Rspfx Ag Toi MODEL: SUPER NTJ GODINA PROIZVODNJE: 2003 UPRAVLJANJE: FANUC 18 iT B PREČNIK STEGE: 210,0 mm MAKS. PREČNIK OBRTA: 200,0 mm RASTOJANJE IZMEĐU CENTARA: 780,0 mm PREČNIK POVLAČNE CEVI: 80,0 mm HODOVI: X OSA: 750,0 mm Z OSA: 130,0 mm REVOLVERSKA GLAVA: 2 x 12 POZICIJA BRZINA VRETENA: do 5.000 o/min PROLAZ VRETENA: 65,00 mm PRIRUBNICA VRETENA: A2-6 DODATNO: - CNC KRATKI MAGACINSKI ULAŽIVAČ ŠIPKI - REVOLVERSKI ALAT - TRANSPORTER STRUGOTINE - PRIRUČNICI

Stanje: zelo dobro (rabljeno), The fully hydraulic high-speed production band saw is equipped with a universal hydraulic system for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials, all without changing the saw blade, thanks to a uniform tooth pitch of 3 or 4 teeth per inch. The machine features a pre-tensioned saw frame guide, enclosed oil hydraulics, triple swivel bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, and is standard-fitted with a stepless mitre setting device. The saw frame can be lifted in rapid traverse mode. A pivoting vice ensures optimum utilization of the saw blade. Longitudinal guidance with ground and hardened guide rails transfers the cutting forces to the saw frame. Automatic end stop. Push-button control for ON/OFF functions and rapid traverse of the saw frame. Manufacturer: KASTO Type: PSB 280 U Drive power: 2.2 kW Stroke frequencies: 40/51/64/80/102/128 strokes/min Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Hjdpfxoxdwbks Ag Tsi Saw feed: hydraulic Cutting range round: 280 mm yCutting range flat: 280 x 150 mm Mitre range: 0-45° Material support height: 600 mm Weight: 650 kg Length/width: 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid lowering, rapid lifting

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, 12 postaj, krmiljenje Siemens Sinumerik 840D, avtomatsko nalaganje/razlaganje, VAS enota za čiščenje zraka, (letnik 2012) Tehnični podatki - Brusilna vretena (z dvema vretenoma) vmesnik – stožec ø 31,75 mm moč (100 % / 40 % ED) – 11,5 / 14,5 kW standardna hitrost vrtenja – 8.000 min⁻¹ Opcija: eno vreteno vmesnik – HSK 50E moč – 100 % / 40 % ED – 11,5 / 14,5 kW standardna hitrost vrtenja – 8.000 min⁻¹ Opcija: eno vreteno vmesnik – HSK 50E moč – 100 % / 40 % ED – 11 / 12 kW standardna hitrost vrtenja – 18.000 min⁻¹ Opcija: eno vreteno vmesnik – HSK 80E moč – 100 % / 40 % ED – 30 / 30 kW standardna hitrost vrtenja – 8.000 min⁻¹ Opcija: visoko frekvenčno vreteno – po naročilu Strojna miza vpenjalna površina – 1.000 x 500 mm število, razmak in širina T utorov – 9 / 50 / 12H7 mm Delovno območje Os X – 700 mm (opcijsko) 1.000 mm (opcijsko) 1.200 mm Os Y – 410 mm Os Z – 500 mm vrtljiv kot osi C – 320° Opcija: X3 – pomožna os delovno območje – 400 mm Merilni sistem in podajanje ločljivost linearnih osi – 0,0005 mm hitro pomikanje linearnih osi – 30.000 mm/min ločljivost rotacijskih osi – 0,001° hitrost vrtenja osi C – 400 min⁻¹ Rotacijska os (os A) standardna višina konice – 175 mm hitrost vrtenja kot vreteno – 2.600 min⁻¹ standardni vmesnik – ISO SK 50 / centriranje 70H5 opcijsko – HSK 100 / 80 / 63 / 50 Opcija avtomatski menjalec orodja HSK50E število orodij / premer orodij notranje kolo – 5 / 300 mm do 9 / 100 mm zunanje kolo – 7 / 300 mm do 16 / 100 mm HSK80E število orodij / premer orodij notranje kolo – 5 / 300 mm do 8 / 100 mm zunanje kolo – 7 / 300 mm do 14 / 100 mm Hodpfov Igghjx Ag Tei Dimenzije obdelovanca premer 340 mm dolžina 550 mm dolžina med konicama 500 mm Električni priklop obratovalna napetost 400 V / 50 Hz, varovano na 80 A Krmilnik Siemens konturno krmiljenje – Sinumerik 840 DSL Pnevmatski priklop obratovalni tlak – 6 – 10 bar Teža skupna teža, odvisno od opreme, 10.000 kg ali več Potrebna tlorisna površina Dolžina x širina (standard) 3.227 x 2.700 mm Višina v delovanju 3.550 mm Višina z možnostjo hladilnih šob 3.810 mm (minimalna višina hale 4.100 mm)

Stanje: novo, CENA: 5000 EUR Stebrno dvigalo za voziček za rezanje Izdelano iz nerjavečega jekla Nosilnost: 250 kg Dimenzije: 1520x1300x2740 mm Električna moč: 1,1 kW Napetost: 380V 50Hz Hjdovtz U Ropfx Ag Toi

Stanje: dober (rabljeno), Leto izdelave: 1985, Megamat Vertical Carousel Type: 130-225-42 Device No.: 4492 Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Hjdpfx Agsvc Hk Ns Tji Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Compartment load: 100 kg Total load: 4,200 kg Colour: beige/green