Čiščenje nakup rabljenega (1.351)

Stanje: novo, Max. tool diameter: 400 mm Max. tool height: 180 mm Operating pressure: 2 bar ROTATHERM chamber washing systems are used across all industrial and craft sectors for cost-effective cleaning of a wide variety of parts and materials. The parts are cleaned in a manner similar to a dishwasher. Placed inside a wire mesh basket, they are washed from all sides in the closed unit by a heated detergent spray. The machine is started after preselecting temperature and wash duration. A centrifugal pump circulates the detergent solution through the nozzle system, which simultaneously sets the basket in rotation. (Optional: electro-motor basket drive) After the cleaning process is complete, the unit shuts off automatically. Parts can also be removed early; in this case, the pump is automatically deactivated when the lid is lifted. ROTATHERM chamber washing units are available at short notice in various sizes and versions, and can be adapted to specific requirements on request. Usually, water-based cleaners are used, but solvents can also be processed in our cleaning machines. If required, the systems can be supplied in explosion-proof versions. Technical details EMSA ROTATHERM Mini: ----- Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50 kg Spray pressure without / with filter: 1.5 / 2.3 bar Recirculating volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230 V Frequency: 50 Hz Dimensions ----- Depth: 530 mm Width: 650 mm Height: 630 mm Weight: 48 kg ----- Price for base unit in configuration described above: On request! ----- Accessories: ----- Order no. 1.521 Lid extension / max. tool length 310 mm Order no. 1.522 HSK 63 F tool holder for change with basket Order no. 1.523 HSK 63 E tool holder for change with basket Order no. 1.524 Tool holder for Weinig Powermat for change with basket Order no. 2.006 Small parts basket Order no. 1.504 Filter unit (0.08 m²) Order no. 1.510 Pressure gauge Order no. 1.511 Electro-motor basket drive Order no. 1.512 Transport frame Order no. 1.513 Castors Order no. 1.514 Extraction unit Order no. 1.516 Oil separator / belt skimmer Order no. 1.518 System entirely in stainless steel Order no. 1.519 Nozzles in stainless steel ----- Prices: On request Fgjdoyrtytepfx Abtoc The ROTATHERM tool washing machine is also available in larger models: Standard, Maxi, and XL. All machines can also be supplied with special voltages. Surcharge on request. When ordering accessories, the stated technical specifications and possibly the delivery time may change! The specified values are guidelines. Subject to technical changes. Delivery time: short notice and by arrangement. All prices ex works plus packaging, transport, insurance, and statutory VAT. (Technical specifications according to manufacturer – no guarantee!)

Stanje: rabljeno, Leto izdelave: 2018, Premer košare: 1.100 mm Uporabna višina: 500 mm Fgodpfx Abozcga Ietjc Nosilnost: 350 kg Rezervoar: 250 l Moč: 15,4 kW Najvišja obratovalna temperatura: 75 °C Stroj za pranje delov ali avtomat za čiščenje delov Sporer PCS Aqua Jumbo Iso za avtomatsko čiščenje in razmaščevanje kosov z ogrevanim vodnim čistilnim sredstvom z brizganjem. Stroj deluje kot zgornji polnilnik z vrtljivo košaro za pranje ter je primeren za velike in težke dele v delavnicah, vzdrževanju ter industriji. Izvedba Iso ima toplotno izolacijo za zmanjšanje toplotnih izgub. Črpalke puščajo in jih je treba obnoviti ali zamenjati.

Stanje: rabljeno, obratovalne ure: 2.744 h, številka stroja/vozila: 184482, tip motorja: Električni, proizvajalec: Hako Fjdoyyk Tnjpfx Abtjgc

Stanje: rabljeno, Nova elektro čistilno-sesalna stroj za tla, model DAEWOO DAFL50A Leto izdelave 2025 – nerabljen, iz skladiščnih zalog Teoretična zmogljivost površine: 2000 m²/h Delovna širina: 510 mm Čistilna krtača: Ø 510 mm Hitrost vrtenja krtače: 175 obr/min Širina sesalne gume: 850 mm Prostornina rezervoarja za čisto vodo: 50 litrov Prostornina rezervoarja za umazano vodo: 50 litrov Glasnost: 66 dBa Vzpenjalna sposobnost: 2% Napetost baterije: 24 V, 100 AH - Polnilec baterije 24 V Fedpszcxmgofx Abtsgc - Baterija 24 V, 100 AH - Ena čistilna krtača - Dva ločena rezervoarja - Brez lastnega pogona, naprava se potiska ročno ali vleče preko pogona krtače Dolžina stroja: 1200 mm Širina stroja: 510 mm Širina sesalne gume: 850 mm Višina stroja: 1350 mm Teža (prazna): 160 kg Novo – originalno zapakirano – nerabljeno, iz skladišča

Stanje: rabljeno, IL 2 upravljanje za ILSA Multimatic Fgedpfsy Uv Uaox Abtec

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 07/2027, vrsta vhodnega toka: trifazni, Stroj za čiščenje pločevine Jeros 5015/828 Za pločevine z 2 robovi Krajša stran dvignjena Izvedba iz nerjavečega jekla Z oljenjem Preverjeno po DGUV V3 samo pri nas Fgsdpfeyaklcex Abtec Priklop: 400V, 16A CEE vtič Rabljeni stroj Vabljeni na obisk!

Leto izdelave: 2016, stanje: dober (rabljeno), 1 rabljena naprava za čiščenje delov z vročo vodo Blagovna znamka: Bio Circle Tip: HTW II 800 Letnik izdelave: 2016 Material: nerjaveče jeklo Električno gnjen vrtljiv koš Učinkovita in stroškovno ugodna Skupna širina: 1175 mm Skupna globina: 1145 mm Višina pri zaprtem pokrovu: 1380 mm (z odvodnim lokom) Višina pri odprtem pokrovu: 1780 mm Premer notranje mrežaste košare: 800 mm Maks. uporabna višina: 400 mm Maks. nosilnost: 350 kg Prostornina rezervoarja za pralno tekočino: 150 litrov Električna priključna moč: 6 kW Napetost: 400 V Frekvenca: 50 Hz Pretok črpalke za čiščenje: 4,8 m³/h Tlak pršenja: 2,5 bara Električni grelec v rezervoarju: 5,3 kW Temperatura obdelave: 10°C do 85°C Nosilnost: 150 kg Priključek za svežo vodo: 1/2″ Fsdpfx Ajzb Iyasbtogc Iztočni ventil: 1 1/4″ Teža: 330 kg

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Metalclean - Metalclean-P-120 Spray Cleaning System in Stainless Steel Single-tank spray cleaning system with rotating basket. Equipped with pneumatic oil separator Stainless steel pump with spray pressure: 5 BAR Usable dimensions: Diameter = 1,200 mm, Height = 700 mm Load capacity per batch = 300 kg Tank volume = 270 liters Operating voltage = 3 x 400 V/N/PE 50 Hz Fedjir Anqjpfx Abtogc Steam extraction

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Available ex stock Switzerland – Immediate Delivery! 24-month warranty Usable capacity: Fgedpfx Asir Apcsbtoc Cleaning area: D = 800 mm Internal height: 530 mm Loading weight: 150 kg Machine housing, internal piping system, control cabinet, and wash basket made of stainless steel - Weekly timer for heater - Electronically controlled basket drive - Level control - Lid locking mechanism - Removable filter plate Accessories: - Steam extraction - Automatic level topping-up - Oil skimmer, WE version - Discharge device / bottom spray system with hosing and manual ball valve

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.200 mm, skupna dolžina: 1.700 mm, skupna širina: 1.100 mm, največja hitrost vrtenja: 2.650 obr/min, moč: 1,6 kW (2,18 KM), kapaciteta rezervoarja za vodo: 100 l, ROSLER RZ 150 A Sludge Removal System – Automatic Sludge Discharge For sale: Professional RZ 150 A cleaning system with automatic sludge removal. The unit is designed for industrial operation, fully automated, and equipped with modern solutions that enhance both efficiency and durability. Key specifications: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2,650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and features: • Soft start and stop via inverter • Adjustable sludge discharge speed • Automatic retraction of cleaning blade • Automatic removal of residual water • Electronic vibration monitoring • Automatic rotor washing • Special bearing lubrication system for extended service life Fgodpfx Aezca Apsbtoc Central Control Unit E61-400: • System operation control and monitoring • E61-400 type central unit • SIEMENS S7-1200 controller • Ensures automatic and stable system operation Sludge removal cycle adjustable from 2 to 5 minutes depending on consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for water supply to centrifuge • Pump operation cycle control • Water level monitoring in tank Also included: P 100 SB-P9 buffer tank for residual dirty water from centrifuge. Required when centrifuge is located away from the dirty water source. P 100 SB-P9 Buffer Tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor wash water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloped, 3-sided hopper-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 Waste Container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied by forklift • Made of steel • Discharge outlet with drain plug • Equipped with tilting mechanism A robust, efficient, and ready-to-use machine.

Leto izdelave: 2017, obratovalne ure: 14.932 h, stanje: rabljeno, številka stroja/vozila: IntNr231417, Descripción técnica – PERO RO Fabricante: PERO AG Modelo: RO R1 / 414-EX Año: 2017 / 10 Tipo de máquina: Sistema de limpieza / Desengrasadora Proceso: Limpieza con disolvente (p. ej., alcoholes modificados o hidrocarburos) Datos técnicos (típicos para esta serie): Sistema de limpieza: sistema de circuito cerrado, totalmente automático Dimensiones de la cámara de trabajo: aprox. 530 × 320 × 200 mm Peso máximo de carga: aprox. 50 – 80 kg Fedjy U Hkxopfx Abtsgc Disolvente: alcohol modificado (a base de hidrocarburos) Secado: secado al vacío Control: control PLC con panel táctil Equipamiento: unidad de destilación integrada, sistema de filtrado, separador de aceite Consumo de energía: aprox. 10 – 15 kW Bomba de vacío: integrada Estado: Muy buen estado, bien mantenida – en producción continua Características especiales: Sistema de limpieza energéticamente eficiente con circuito de disolvente cerrado Alta calidad de limpieza con consumo mínimo de disolvente Ideal para industrias de precisión y mecanizado Se puede inspeccionar en funcionamiento previa cita. ¡Sujeto a cambios y errores en los datos técnicos y especificaciones, así como a venta previa!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna dolžina: 1.100 mm, skupna širina: 1.320 mm, skupna višina: 1.050 mm, vhodna frekvenca: 50 Hz, Stroj za čiščenje pločevin KD-Putz Tubur Premium Stroj za čiščenje pločevin Fgodpfxoyv U Nfj Abtec za pekaške / perforirane pločevine kratka stran dvignjena Izvedba iz nerjavečega jekla z oljenjem in vozičkom za pločevine Priklop: 400V, 16A-CEE vtič Mere: 1320 x 1100 x 1050 mm (ŠxDxV) Rabljeni stroj iz pekarne

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, NEU +++ NEU 3 & 4 Rand-Blechputzmaschine NEU +++ NEU 1 Mann Bedienung Edelstahlausführung fahrbar Maximales Blechmaß: bis zu 600 x 800 mm Auffangblech unten ausziehbar Maße: 2234 x 630 x 1372 mm, LxBxH Die Vielseitigkeit des Tablett/-Blechreinigers zeigt sich auch darin, dass er sogar 4-Rand-Tabletts mit einer Randhöhe von bis zu 24 mm verarbeiten kann. Verunreinigungen sammeln sich unter dem Reiniger auf einem ausziehbaren, leicht zu entleerenden Regal. Das Gerät ist vollmobil und lässt sich nach Arbeitsende mühelos an den gewünschten Ort bewegen. Die gesamte Konstruktion wird kugelgestrahlt, wodurch die Oberflächen so glatt und hygienisch wie möglich sind Anschluss 400V, 16A-CEE Stecker Neugerät mit Gewährleistung + Ersatzteil Service Qualität vom Fachbetrieb! Profitieren Sie aus über 35 Jahren Erfahrung! Option: Blechmaß Reinigung bis 600 x 1000 mm Befettung/- Beölung für Bleche Service Paket Lieferservice Einweisung & Inbetriebnahme Fodpfew S Slnjx Abtegc Besuchen Sie uns!

Leto izdelave: 2011, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Clean-o-mat SP 120 Uporabni premer košare cca 1140 mm Priključne vrednosti: 230/400 V/24 A/50 Hz Uporabna višina cca 500 mm Motor črpalke: 4 kW Fjdpsyth Uzsfx Abtegc Višina nakladanja cca 830 mm Ogrevalna moč: 9 kW Dovoljena obremenitev košare: 500 kg Pogon za vrtenje košare: 0,09 kW Volumen tekočine: 210 l Enostopenjsko izsesavanje pare: 0,45 kW Pretok črpalke: 280 l/min Skupna višina cca 1250 mm

Stanje: rabljeno, Leto izdelave: 2021, Veolia paket rezervnih delov za čiščenje odpadnih voda (neuporabljen, letnik 2021) 2 x Alfa Laval Aldec 45 centrifuga (dekantirni) Proces Opis aplikacije: IW – odpadna voda Opis procesa: MUE, biološko zgoščevanje blata Največja gostota kompaktnega mokrega kolača: 1,3 kg/dm3 pri največ 4200 min⁻¹ Boben Največja glavna hitrost: 4200 min⁻¹ Fgsdszb N Hhspfx Abtoc Premer bobna: 360 mm DNF enota – zgornji rezervoar – PPM 200CE – A DNF enota – zgornji rezervoar – PPM 200CE – B 4x filter za odstranjevanje mangana (Mn) 3x reverzno osmozni (RO) skid 3x dozirna enota za praškasto aktivno oglje (PAC) – Rittal JB 2x DNF enota – enota s črpalko PoseiPump 3x tlačni ventilator (blower) ES145/5P-RVP300-spec 6x pred-filter za odstranjevanje mangana (Mn) 2x DNF enota – recirkulacijska cev Seznam rezervnih delov je na voljo na zahtevo. Fotografije so simbolične in ne prikazujejo dejanskih predmetov. Opomba: Prodaja je pogojena z uspešno zaključenim postopkom preverjanja poslovnega partnerja (BPDDC) in predložitvijo izjave o končnem uporabniku (EUS) s strani kupca v roku 24 ur po pogojni prodaji, ter, če kupec ni končni uporabnik, za vsakega končnega uporabnika posebej.

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean-air extraction unit with H3 certification Suction inlet: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 1,140 m³/h Rated airflow: 814 m³/h Negative pressure: 2,180 Pa Fodohkztwspfx Abtjgc Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Al-Ko Clean Air Dust Extractor Year 2024 Exhibition piece – Fgodpfocdy I Rox Abtec Immediately available Absolute special price Technical Data Power Unit 250 P Inlet nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum pressure: 2,451 Pa Filter surface area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: in stock, 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Fgsdpfecnw T Iex Abtjc Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Fodjcnw U Depfx Abtegc Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Leto izdelave: 2017, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MAXI 91-2, The machine has been thoroughly inspected by IBS and the pump has been newly sealed. Current photos will follow Easy handling thanks to a fully automatic cleaning process, allowing skilled workers to focus on other important tasks. The wash tank is filled with a mixture of water and IBS special water-soluble cleaner (cleaning solution). The soiled parts are placed in the rotating wash basket and the lid is closed. Once the desired washing temperature and time are set, the device is switched on and the cleaning solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed on its own axis. The pump units draw the cleaning solution from the wash tank and deliver it through six stainless-steel spray pipes with overlapping flat jet nozzles. With uniform rotation of the motor-driven basket, the workpieces are intensively blasted with hot cleaning solution from all sides. After completion of the cleaning process, the device switches off automatically. Benefits: - Two horizontally arranged pumps - Six stainless-steel spray arms arranged in a three-dimensional pattern - Robust stainless-steel construction - Additional small-part cleaning basket made of stainless-steel (diameter 170 mm) - Rotating wash basket made of stainless-steel, V-belt drive via separate motor - Steam extraction - Stainless-steel perforated screen with filter basket above the wash tank - Low water level protection - Individually height-adjustable stand feet Technical Data: - Tank/basket capacity: 190 l - Tank/basket diameter: 910 mm - Load capacity: 200 kg (optionally 300 kg) Fgedpfx Abeudz D Ujtsc - Temperature range: 0–60 °C - Working height: 500 mm - Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm - Weight: 150 kg - Heating power: 6 kW - Spray volume: 2 x 6600 l/h - Material: stainless steel - Electrical connection: 8 kW / 400 V / 50 Hz - Pump pressure: 2.5 bar

Stanje: dober (rabljeno), Leto izdelave: 2003, Naprava za čiščenje delov, IBS – rabljeno - : Cena na kos: 350 € (neto) Proizvajalec: IBS Scherer GmbH Tip: Tip F2 Leto izdelave: 2003 Serijska številka: 44675 Električni priključek: 1/N/PE 230V, 50Hz Nazivna moč: 18W, 0,2A Nosilnost: 60 kg Fodpex El A Ujfx Abtjgc Širina: 800 mm Lastna teža: 50 kg Velikost soda: sod 50 litrov Material ogrodja: jeklo Višina: 1125 mm Vrsta čiščenja: specialno čistilo Širina čistilnega korita: 790 mm Globina čistilnega korita: 540 mm Stanje: dobro Na voljo: takoj Lokacija: skladišče Frankenberg / Saška

Stanje: rabljeno, Valjčni brusilnik JET Motor 7,5 kW Hitrost - 2 prestavi Maks. širina obdelovanca: 610 mm Maks. višina obdelovanca: 130 mm Stroj je pripravljen za delo. Fodpfezb H Eusx Abtjgc

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + automatic water top-up for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return + weekly timer for electric heating + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) Fgedpfxev Tm Ays Abtsc + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Delujoč stroj Fjdsw Hpd Sepfx Abtegc

Stanje: rabljeno, Leto izdelave: 2005, Overview The bottle washing machine was previously used in a mineral water factory. Thanks to good maintenance, the machine is in good condition. All tanks and the machine body are made of stainless steel. The machine is still operational and will be available at the beginning of 2027, when the entire plant is being replaced. Technical Data Capacity: 15,500 bottles per hour Cell pitch: 95 mm Bottles per row: 16 Dimensions & Weights: Housing: 8,350 x 1,860 x 2,990 mm / 21,750 kg Ready for operation with attachments: 8,700 x 3,560 x 3,330 mm / 37,639 kg Year of construction: 2005 Formats: 0.5 l, 0.75 l Machine Details / Features - Heated by steam - Pre-cleaning and removal of residual liquids by impulse rinsing prior to washing - CE certified - Chemical dosing pumps - Machine data sheet included in scope of delivery - Rotating spray nozzles - Single-sided machine - Label discharge at the rear right - Label printer mounted on the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply fluid - Cross section view of tank arrangement - Spindles made of stainless steel - Controlled by Siemens S7 - Serviced regularly Fgedpjzbha Hjfx Abtoc - Machine housing made entirely of stainless steel - Steam outlet